General Papers
| 2D and 3D self-affine crack propagation on aluminium alloys | |
| M. Hinojosa, E. I. Morales, X. Guerrero, U. Ortiz, J. Aldaco |
| 2D simulation of tensile behavior of fiber-reinforced brittle matrix composites with weak interface | |
| S. Ochiai, S. Kimura, M. Tanaka, M. Hojo |
| A boundary element based meso-analysis on the evolution of material damage | |
| H. Okada, Y. Fukui, N. Kumazawa |
| A complex variable formulation for the interactions between rigid inclusions and cracks | |
| K. T. Chau, W. B. Wang |
| A J estimation scheme and its application to low cycle fatigue crack growth | |
| G. G. Chell, R. C. McClung, Y.-D. Lee |
| A limit equilibrium of quasibrittle materials with thin inclusions | |
| M. M. Stadnyk, I. Y. Horbachevskyy |
| A mesoscopic theory of damage and fracture in heterogeneous materials | |
| A. Carpinteri, B. Chiaia, P. Cornetti |
| A method for acceleration of decreasing *K FCGR tests | |
| S. Tarafder, S. Sivaprasad, M. Tarafder, K. K. Ray |
| A method for variable amplitude lifetime calculation in the high cycle regime | |
| H. Zenner, S. Poting |
| A multiscale fracture mechanics model for predicting damage evolution in laminated composites subjected to impact loading | |
| D. H. Allen |
| A new approach for identifying the bending loads on beam using the discrete integral method | |
| H. Kisu, G. Rong, Y. Kondo |
| A new experimental technique for determining the fracture energy of wood under mode II loading conditions | |
| K. Fruhmann, E.K. Tschegg, S.E. Stanzl-Tschegg |
| A new material model and its application to fracture analysis in fiber pull-out tests | |
| R. V. Goldstein, E. Lyamina, S. Alexandrov |
| A new nonlocal fracture criterion | |
| S. V. Suknyov |
| A numerical study of constraint and rate effects on dynamic crack growth | |
| X. Zhang, Y.-W. Mai |
| A possible explanation of size effect in fatigue strength of metals | |
| A. Carpinteri, A. Landini, A. Spagnoli |
| A potential node release technique for estimating ductile crack growth in metallic materials | |
| J. X. Zhang, H. Murakawa |
| A simple method for topology optimization using orthotropic material properties | |
| Z. Wu, Y. Sogabe, Y. Arimitsu |
| A stiffness release (finite element) model for high speed crack propagation analysis | |
| N. N. Kishore, M. Siva Reddy, G. V. Deskmukh |
| A strain based approach to assessing creep crack initiation and crack growth | |
| D. J. Smith, A. J. Fookes, D. W. Dean |
| A study of crack depth effect and scattering of fracture toughness in three point bend COD specimens | |
| M. Toyosada, K. Gotoh, S. Nakayama |
| A study of fatigue cracking behaviour dependent on the distance between two hole defects | |
| S.-H. Song, J.-S. Bae, A. Kim |
| A study of fracture from the viewpoint of dilatation | |
| Y. Arimitsu, Y. Sogabe, Z. Wu |
| A study of hydrogen embrittlement in automotive fastener steels | |
| B. Lonyuk, R. op, D. N. Hanlon, S. van der Zwaag, J. Zuidema, A. Bakker |
| A study of mode II fracture toughness test standardisation of metals | |
| T. Tamilselvan, K. W. Lo, Y. B. Gong, M. O. Lai |
| A theremodynamically consistent damage formulation based on a nonlocal damage activation threshold | |
| G. Borino, E. Benvenuti, A. Tralli |
| A toughness study of the weld heat affected zone of a modified 9Cr-1Mo steel | |
| A. Moitra, K. Laha, R. P. Sreenivasan, S. L. Mannan |
| A variable-amplitude fatigue life prediction taking into account crack retardation | |
| Z. Perovic |
| A variational principle for finite transformation gradient plasticity to model ductile fracture | |
| E. Lorentz, V. Cano |
| Ab initio study of generalized stacking fault energies in magnesium | |
| T. Uesugi, M. Kohyama, M. Kohzu, K. Higashi |
| About the connection between the characteristics of the LCF and FCG | |
| G. Nagy, J. Lukacs |
| Account of plasticity in macro-microcrack interaction | |
| V. Tamuzs, V. Petrova, S. Tarasovs |
| Accuracy of measurement in instrumented impact test | |
| T. Kobayashi, S. Morita |
| Advanced cohesive zone models for fracture simulation | |
| T. Siegmund |
| Aircraft structural integrity: the impact of corrosion | |
| G. Clark, P. K. Sharp, T. Mills |
| Alternative methods for deriving and fitting J-R curves: How they affect structural integrity assessment | |
| J. R. Tarpani, A. A. Colafemea, W. W Bose Filho, D. Spinelli |
| An analytical technique for studying interacting branched cracks in a plate | |
| S. C. TerMaath |
| An elasto-plastic damage model for cementitious materials | |
| D. Addessi, S. Marfia, E. Sacco |
| An element-free Galerkin method for dynamic fracture in functional graded material | |
| H. Peixiang, L. Ziran, W. Changchun |
| An example of the influence of residual stress on fracture | |
| I. Finnie |
| An experimental investigation of dynamic inelastcity and fracture of nanostructured coatings | |
| H. Espinosa, Z. Wu |
| An experimental model of void growth and coalescence during ductile fracture | |
| C. R. Colapietro, P. A. Kirkham, D. A. Koss |
| An extended void growth model for ductile failure - assessment for non radial loadings and application to fracture toughness prediction | |
| T. Pardoen, J. W. Hutchinson, L. Cousin-Cornet |
| An impact damage model for cementitious composites | |
| P. Verleysen, J. Degriek |
| An integrated EFGM-FEM for linear-elastic fracture mechanics | |
| B. N. Rao, S. Rahman |
| An integrated multiscale computation model to link atomic and continuum approaches | |
| Y. Liu |
| An interface element for the numerical analysis of fibre reinforced concrete | |
| M. Cuomo |
| An overview of failure mechanisms in high temperature components in power plants | |
| R. Viswnathan |
| Analyses of size effects in the charpy v-notch test | |
| A. A. Benzerga, R. Batisse, A. Needleman, V. Tvergaa |
| Analysis and testing of rupture of steam generator tubing with flaws | |
| S. Majumdar, K. S. Kasza, J. Y. Park, J. Abou Hanna |
| Analysis of a penny-shaped crack in a transversely isotropic piezoelectric medium | |
| M.-H. Zhao, P. Tong, T.-Y. Zhang |
| Analysis of ballistic properties of multilayered shields using approximate models | |
| T. Elperin, G. Ben-Dor, A. Dubinsky |
| Analysis of environmental effects using the unified approach for fatigue crack growth | |
| K. Sadananda, R. L. Holtz, A. K. Vasudevan |
| Analysis of fracture mechanics and fatigue behaviour for EC(T) specimen | |
| J. Z. Liu, X. R. Wu, B. R. Hu, L. F. Wang |
| Analysis of micromechanical tensile damage process for brittle ceramic materials using FEM | |
| T. Niezgoda, J. Malachowski, Z. Smalko |
| Analysis of subsonic interfacial fracture using strain gages in an isotropic-orthotropic biomaterial | |
| V. Ricci, K. H. Lee, A. Shukla, V. Chalivendra |
| Analysis of the physico-chemical mechanisms responsible for hydrogen attack | |
| S. M. Schlogl, E. Van der Giessen |
| Analysis of the process zone ahead of a crack tip | |
| J. Lemaitre |
| Analysis of three dimentional interface cracking in electronic packages | |
| A. O. Ayhan, H. F. Nied |
| Anistropic microcrack-based frictional damage model for brittle materials | |
| L. Gambarotta |
| Anti-plane shear crack growth in piezoceramics: change of electric field and displacement direction | |
| B. Liu, S. Y. Cheng, Z. F. Song, W. F. Ren |
| Application of risk-based maintenance with life and financial assessment on fossil-fired power plants | |
| A. Fuji, H. Eguchi, J. Takahashi, C. Fukuoka, T. Tanoue, Y. Okatsuka |
| Application of ultrasonic peening to improving fatigue properties of welded joints | |
| H. Lixing, W. Dongpo, S. Yufeng, C. Jungmei |
| Assessment of fatigue strength of low alloy steels for ships' crankshaft | |
| S. Omata, H. Matsushita |
| Assessment of fracturing tunnel linings with smeared crack model | |
| Z. S. Wu, J. Yin, T. Asakura, Y. Kojima |
| Asymptotic fields at a crack-tip in flat paltes | |
| J. Li |
| Asymptotic fields near a crack tip located at interfaces of several anisotropic materials | |
| L. Jia, X.-B. Zhang, N. Recho |
| Asymtotic Mode III and Mode E Crack Tip Solutions in Ferroelectric Materials | |
| C. Landis |
| Atomic scale investigation of metal/ceramic interface fracture by super high-resolution electron microscopy | |
| H. Ichinose, H. Saito |
| Atomic-force microscopy on corrosion pits and crack initiation in fatigue metals | |
| Y. Nakai, Y. Shimizu, S. Fujiwara, T. Ogawa |
| Atomistic approaches to fracture | |
| M. Marder |
| Atomistic simulations of the mechanical response and modes of failure in metals at finite strain | |
| J. Zhao, S. Chantasiriwan, D. Maroudas, F. Milstein |
| Automatic control of secondary flexure in uniaxial tensile test of concrete | |
| H. Akita, S. Donggy, H. Koide, M. Tomon |
| Beam theory and weight function methods for mode I delamination with large scale bridging | |
| R. Massabo, B. N. Cox |
| Betonite pellets mechanical properties variation caused by oily waste inclusion | |
| E. A. de Carvalho, G. P. Sousa, J. N. F. Holanda |
| Bifurcation assessment of mixed mode crack in elastic-plastic materials | |
| X. B. Zhang, J. Li, N. Recho |
| Brittle fracture of hard soil - soft rock materials | |
| K. W. Lo, T. Tamilselvan, L. Yu |
| Calculation model for corrosion calendar life of metal parts | |
| Z. Fuze |
| Can stretch zone measurements provide a good estimate of fracture toughness | |
| S. Sivaprasad, S. Tarafder, V. R. Ranganath, S. K. Das, K. K Ray |
| Challenges in characterizing the crack-tip environment as a basis for prediction of crack growth kinetics | |
| A. Turnbull |
| Characterisation of crack toughness behaviour of unfilled and filled elastomers | |
| W. Grellmann, K. Reincke, R. Lach, G. Heinrich |
| Characterisation of fatigue crack formation in mechanically surface treated austenitic stainless steel | |
| I. Altenberger, B. Scholtes, U. Noster, R. O. Ritchie |
| Characterization, analysis and prediction of delamination in composites using fracture mechanics | |
| T. K. O'Brien |
| Co-planar crack interaction in cleaved MICA | |
| J.C. Hill, S.J. Bennison, P.A. Klein, A. Jagota, S. Saigal |
| Cohesive and adhesive fracture under nanoscale contacts: Environmental and microstructural effects | |
| N. I. Tymiak, A. Daugela, M. Li, T. J. Wyrobek, W. W. Gerberich |
| Cohesive model for thin film/substrate interfacial cleavage fracture | |
| Y. Shouwen, L. Ran |
| Cohesive-zone modeling of debond growth at adhesively bonded interfaces in aggressive environments | |
| S. Roy, K. M. Liechti |
| Coincindence doppler broadening positron annihilation spectroscopy in defects in iron and silicon | |
| M. Fujinami, T. Sawada, T. Akahane |
| Comparison of experiment and theory for crack tip fields in ductile single crystals | |
| W. C. Crone, W. J. Drugan |
| Comparison of measured fracture toughness and size-independent fracture toughness for concrete | |
| J. H. Hanson, A. R. Ingraffea |
| Complex component failure with large ductile crack growth - high quality prediction by damage mechanical simulation and experimental verification | |
| W. Baer, D. Klingbeil |
| Composite laminates least prone to cracking under combined mechanical and thermal loads | |
| B. L. Karihaloo, J. Wang |
| Compressive fracture of orthotropic laminates containing open holes due to fibre micro-instability | |
| C. Soutis |
| Computational modelling of cracks in viscoplastic media | |
| G. N. Wells, L. J. Sluys, R. de Borst |
| Computational modelling of residual stress effects on crack initiation and growth in ductile materials | |
| N. P. O'Dowd, Y. Lei, P. S. May, G. A. Webster |
| Constituent effects on the stress-strain behavior of woven melt-infiltrated SiC composites | |
| G. N. Morscher, J. I. Eldridge |
| Constraint correction of fracture toughness CTOD for fracture performance evaluation of structural components | |
| F. Minami, K. Arimochi |
| Constraint loss in ductile solids under dynamic loading | |
| R. Narasimhan |
| Construction of strain-life diagram based on variable amplitude fatigue data | |
| M. Endo, H. Miyata |
| Continum and atomistric studies of intersonic and supersonic crack propogation | |
| H. Gao, Y. Huang, F. F. Abraham |
| Continuum models with ruptured/restored microstructure | |
| A. I. Leonov |
| Continuum-atomistic modeling for crack initiation and propagation in polycrystals | |
| E. Iesulauro, K. Dodhia, T. Cretegny, C.-S. Chen, C. Myers, A. R. Ingraffea |
| Corrosion cracking of stainless steel under stress: the problem and its solution | |
| A. A. Myatie-v, G. V. Khil'chenko |
| Corrosion fatigue behavior of ship structural steels | |
| R. Ebara |
| Corrosion fatigue fracture behavior of high-strength Cu trolley wire for high-speed railroad services | |
| K. Minoshima, K. Miyazawa, K. Komai |
| Corrosion fatigue mechanisms in metallic materials | |
| T. Magnin, D. Delafosse |
| Corrosion-fatigue performance of die cast magnesium alloys | |
| W. G. Ferguson, W. Liu, J. MacCulloch |
| Corrosion-pit-growth behaviour during corrosion fatigue process in aluminium | |
| S. Ishihara |
| Coupling of asymptotic solutions with finite elements at interface configurations in piezoelectric composites | |
| M. Scherzer, M. Kuna |
| Coupling of damage mechanics and probabilistic approach for life-time prediction of composite material structures | |
| Y. Bruner, D. Jeulin, J. Renard, A. Thionnet |
| Crack deflection in layered, graded composites | |
| J. Chapa-Cabrera, I. E. Reimanis |
| Crack front waves in dynamic fracture | |
| J. Fineberg, E. Sharon |
| Crack growth behaviour of Ni-Base High Temperature Alloys at 500 to 1000°C | |
| F. Schubert, H. J. Penkalla, P. J. Ennis, L. Singheiser |
| Crack growth characteristics under high temperature fatigue-creep multiplication division | |
| M. Yoda, O. Yokota, M. Kanou, T. Yokobori |
| Crack growth in a Ti6A14V alloy under multiaxial fatigue | |
| F. S. Silva, A. C. M. Pinho |
| Crack growth in solid propellants | |
| E. E. Gdoutos, G. Papakaliatakis |
| Crack growth resistance of metal foams | |
| I. Schmidt, N. A. Fleck |
| Crack initiation and growth in graded materials due to sliding contact | |
| F. Erdogan |
| Crack initiation behavior of piezoelectric ceramic: electro-mechanical interaction | |
| B. Liu, Z. F. Song, G. C. Sih |
| Crack path development in materials with nonlinear process zone and composites | |
| A. A. Rubinstein |
| Crack Plane Influence on Time-Dependent Fracture of Bimaterials | |
| A. Gordon, D. McDowell |
| Crack propagation in cementitious materials by acoustic emission based on fracture mechanics | |
| M. Ohtsu |
| Crack propagation in concrete elements strengthened by GFRP | |
| B. Bonfiglioli, G. Pascale, E. Viola |
| Crack propagation in mixed mode fracture of concrete | |
| P. C. Olsen |
| Crack stability in uniaxial tensile tests | |
| C. Shi, J. G. M. van Mier |
| Crack Tip Deformation and Toughness in Polypropylenes | |
| S. Seidler, T. Koch, I. Kotter, W. Grellmann |
| Crack velocity dependent toughness in rate dependent materials | |
| C. M. Landis, T. Pardoen, J. W. Hutchinson |
| Creep crack growth analysis based on microscopic fracture mechanism | |
| M. Tabuchi, K. Kubo, K. Yagi, A. T. Yokobori |
| Creep crack growth parameters in directionally solidified superalloys | |
| A. Saxena, B. Gardner, J. Qu |
| Creep damage analysis of short cracks using a narrow notch specimen made from a Ni-base superaloy at 700°C | |
| T. H. Hyde, A. A. Becker, W. Sun |
| Creep effects on tensile failure of concrete at an early age | |
| K. Iriya, H. Umehara |
| Creep fracture of ceramic-matrix composites | |
| B. Wilshire, H. Burt |
| Critical energy release rate of a bimaterial asymmetric double cantilever beam (ADCB) with an adhesive layer | |
| N. B Kuipers, A. Bakker, G. E. Schoolenberg, M. Janssen |
| Critical length of short fatigue cracks | |
| A. Plumtree, N. Untermann |
| Cross-sectional nanoindentation: a new technique to measure thin film interfacial adhesion | |
| B. Sun, T. Scherban, D. Pantuso, J. M. Sanchez, R. Elizalde, J. M. Martinez-Esnaola |
| Crystallographic analysis of surfaces after brittle fracture in ferritic steels | |
| V. Randle, P. Davies, O. Williams |
| Curved crack path prediction by the MVCCI-method and experimental verification for a specimen under lateral force bending | |
| H. Theilig, F. –G. Buchholz |
| Cyclic compression of jacketed reinforced concrete columns | |
| D. Krajcinovic |
| Cyclic crack tip deformation - the influence of environment | |
| E. Gach, R. Pippan |
| Cyclic plastic deformation of pipeline steel | |
| C. H. L. J. ten Horn, A. Bakker, R. W. J. Koers, J. T. Martin, J. Zuidema |
| Cyclic thermal loading of ceramic matrix composites: constitutive models and design strategies | |
| A. C. F. Cocks, M. E. Booker, F. A. Leckie |
| Damage and fracture in creep of magnesium alloy-based composites | |
| V. Sklenicka, M. Pahutova, M. Svoboda, K. Kucharova, I. Podstranska |
| Damage assessment for concrete-structures using AE/UT technique | |
| K. Iwaki, T. Shiotani, M. Ohtsu |
| Damage concept on fatigue crack growth characteristics under mixed-mode loading condition | |
| T. Isogai, A. T. Yokobori |
| Damage evolution and damage tolerance in ceramic matrix composites: empirical measurements and analytical modeling | |
| M. Jenkins |
| Damage evolution and fracture of viscoelastic composites under time-varying loads | |
| J. Varna, A. Krasnikovs, R. Talreja |
| Damage formation in transformations in HTSC during compaction and sintering | |
| I. A. Parinov |
| Damage fracture and fatigue for the piezoelectric and ferroelectric medium | |
| Y. Shouwen, W. Yang |
| Damage in high temperature components and the life assessment technologies | |
| K. Fujiyama, T. Fujiwara |
| Damage initiation and evolution in a heterogeneous material | |
| C. Liu, M. G. Stout, B. W. Asay |
| Damage of nickel base superalloy subjected to low cycle fatigue with hold periods | |
| J. ZrnÃk, J. Semenak, V. Vrchovinsky |
| Damage progression behaviour under high temperature creep and fatigue conditions | |
| A. T. Yokobori Jr., Y. Kaji, T. Kuriyama |
| Deformation Characteristics on Creasing of Paperboard Under Shallow Indentation | |
| S. Nagasawa, Y. Fukuzawa, D. Yamaguchi, S. Nagae, I. Katayama, A. Yoshizawa |
| Deformation of [001] NiTi single crystals | |
| H. Sehitoglu, X. Zhang, J. Jun, I. Karaman, K. Gall, Y. Chumlyakov |
| Description of multiple cracking in uv-degraded stressed polyethylene using percolation approach | |
| I. Skrypnyk, N. Bilyk, J. Spoormaker |
| Design of experiments for reliability assessment of active mechanical structures | |
| R. Kouta, H. Fall, W. Charon |
| Deterioration properties of damaged concrete due to freezing and thawing | |
| H. Mihashi, M. Saichi |
| Determination of different fracture mode stress intensity factor with virtual crack extension method | |
| B. Zafosnik, M. Ubin, Z. Ren, J. Flasker |
| Determination of fracture properties of high-chromium white cast iron | |
| M. Janssen, M.B. van Leeuwen, M.F. Mendes de Leon |
| Determination of fracture toughness of rock under in-situ conditions using semi-circular specimen | |
| M. D. Kuruppu, M. Seto |
| Determination of microstructural parameters for modeling of fatigue behavior in ceramics | |
| K. White |
| Determining load history effects on HCF crack growth thresholds | |
| M. A. Moshier, T. Nicholas, B. M. Hillbery |
| Detrimental effect of hydrogen on the fracture strength of single-walled carbon nanotubes | |
| S. Q. Shi, L. G. Zhou |
| Development and validation of a robust fracture mechanics methodology for damage tolerance of rotorcraft | |
| S.N. Atluri, G. Nikishkov, D. Le, C. Harrsion, M. F. Kanninen |
| Development of cohesive models from the study of atomic scale fracture processes | |
| P. A. Klein, J. A. Zimmerman, E. P. Chen |
| Digital speckle correlation test for fracture of thin film | |
| H. Wang, Y. Kang |
| Direct comparison of elastic-perfectly-plastic interfacial free-edge and crack-tip singular fields | |
| L. Marsavina, A. D. Nurse |
| Direct evaluation of accurate stress intensity factors with a partition of unity method | |
| B. L. Karihaloo, Q. Z Xiao |
| Discontinous crack growth of polymide resin, effect of molecular weight | |
| M. Notomi, K. Kishimoto, T. Shibuya, H. Inaba, A. Morita |
| Discrete dislocation analyses of crack growth | |
| V. S. Deshpande, A. Needleman, E. Van der Giessen |
| Double cohesive zone model and prediction of micro-scratch testing along solid surface | |
| M. Zhao, Y. Wei, J. W. Hutchinson |
| Ductile damage accumulation under cyclic deformations and multiaxial state of stress conditions | |
| N. Bonora, A. Pirondi |
| Ductile damage and crack growth analysis in 3D structures | |
| D. Gross, H. Baaser |
| Ductile fracture analysis of structural steel by application of micromechanical modelling | |
| M. Rakin, Z. Cvijovic, A. Sedmak, M. Zrillic, Z. Putic |
| Ductile fracture in high strength steel weldments | |
| V. Olden, Z. Zhang, C. Thaulow |
| Ductile rupture of aluminium sheets | |
| J. Brocks, J. Besson, O. Chabanet, D. Steglich |
| Ductile tearing of interacting surface breaking defects | |
| B. Bezensek, J. Hancock |
| Dynamic compressive behavior of closed-cell aluminum foams | |
| J. Lankford, A. Nicholls, K. Dannemann |
| Dynamic delaminatin in through-thickness reinforced DCB specimens | |
| N. Sridhar, B. N. Cox, I. J. Beyerlein, R. Masa |
| Dynamic embrittlement: time dependent intergranular decohesion | |
| C. McMahon |
| Dynamic fracture and fragmentation brittle spheres subject to double impact test | |
| K. T. Chau, S. Z. Wu, X. X. Wei |
| Dynamic fracture behaviour of composites | |
| S. Ravi, N. G. R. Iyengar, N. N. Kishore, A. Shu |
| Dynamic fracture surface energy values and frustrated micro-branches during RCP in an impact modified polymer | |
| C. Fond, R. Schirrer |
| Dynamic fracture testing using charpy instrumented pendulum | |
| Z. Radakovic, D. Radakovic, G. B. Lenkey, V. Grabulov, A. Sedmak |
| Dynamic JR curves from instrumented impact test of unprecracked charpy V-notch specimens of austenitic stainless steel | |
| P. R. Sreenivasan, S. K. Ray, S. L. Mannan |
| Dynamic stress intensity factor for unsteady rapid crack propagation | |
| K. Arakawa, T. Mada, K. Takahashi |
| Dynamic tensile strength of PMMA/AL plate butt adhesive joints | |
| H. Wada, S. Kubo, K. Murase, T. C. Kennedy |
| Dynamics of inter-facial crack front propagation | |
| K. J. Maloy, J. Schmittbuhl, A. Delaplace, J. J. Ramasco |
| Effect of aqueous environment and viscid droplet on deformation of spider thread | |
| M. Kitagwa |
| Effect of bridging ligaments upon crack kinking in graded interfaces | |
| M. Hoffman, L. Kidson, C. Deneke |
| Effect of crack orientation and welding process on J-integral values | |
| Q. Li, L. Li, S.-S. Yang, S.-L. Yang, S.-T. Yin |
| Effect of cracking on serviceability of fibrous concrete | |
| T. Ayano, M. A. afa, K. Sakata |
| Effect of electrical field reversal on crack growth behaviour in poled piezoelectric ceramics | |
| G. C. Sih |
| Effect of fiber coatings on detection of transverse cracks in CFRP composites using FBG sensors | |
| Y. Okabe, N. Tanaka, T. Mitzutani, S. Yashiro, N. Takeda |
| Effect of film plasticizing under multistage ultimate strain | |
| A. A. Myatie-v, G. V. Khil'chenko |
| Effect of foreign object damage on the high cycle fatigue strength of Ti-6Al-4V | |
| S. R. Thompson, J. J. Ruschau, T. Nicholas |
| Effect of halogen freeing on fatigue properties of electronics printed plastic board | |
| M. Nakamura, H. Suzuki, T. Matsumoto, T. Ohtsuki |
| Effect of humidity on fatigue crack propagation of aluminum alloys | |
| Y. Koboyashi, Y. Ito, K. Kido, K. Ishikawa |
| Effect of impact loading on tensile strength of concretes | |
| M. Daimaruya, H. Kobayashi, H. Shizawa, R. A. Siriegar, Y. Ishihata |
| Effect of microstructural change on the R-curve behavior of an alumina matrix composite reinforced with SiC-whiskers | |
| T. Akatsu, Y. Tanabe, E. Yasuda |
| Effect of microstructural degradation on crack tip stress fields in two-phase single crystals | |
| E. P. Busso, N. P. O'Dowd, S. Dumoulin, D. Allen |
| Effect of nanotexturing on interfacial adhesion in MEMS | |
| M. P. de Boer |
| Effect of notch sharpness and cold expansion on the fatigue crack arrest | |
| R. Ghfiri, A. Amrouche, A. Imad |
| Effect of predeformation on fatigue life - experimental characterisation and description by means of a new parameter | |
| H.-J. Christ, K. Schoeler |
| Effect of reinforcing particle morphology on the tensile response of 6061/SiC/25p discontinuously-reinforced aluminum | |
| J. E. Spowart, D. B. Miracle |
| Effect of residual stress on fatigue strength of steel modified by WPC process | |
| D. Yonekura, H. Akebono, J. Komotori, M. Shimizu, H. Shimizu |
| Effect of surface crack geometry on the fatigue life of a high strength low alloy steel | |
| A. Giassone, F. A. Darwish, M. V. Pereira, .A C. Vidal, A. R. Martins |
| Effect of surface roughness on corrosion response of stainless steel polished by ELID grinding method | |
| J. Nagata, J. Komotori, K. Katahira, H. Ohmori |
| Effect of test rate on tensile strength of various continuous fiber-reinforced ceramic composites at elevated temperatures | |
| S. R. Choi, J. P. Gyekenyesi |
| Effect of the notch shape and the presence of a circular void in front of a circular notch on the failure mode transition speed in an impact loaded plate | |
| R. C. Batra, N. A. Jaber, M. E. Malsbury |
| Effect of the size of surface defects on the fatigue strength of shot peened springs | |
| B. Vargas-Arista, J. L. Gonzalez, J. M. Hallen, A. J. McEvily |
| Effect of thermal exposure of the fracture toughness of several high temperature adhesive systems | |
| D. Rhymer, S. Johnson |
| Effective mode-II stress intesity factor for partially opened natural cracks under mixed-mode loading | |
| T. Fett |
| Effects of constraint and grain size on ductility and toughness in Ti Alloys | |
| S. Kanamori, E. Abe, T. Tagawa, T. Miyata |
| Effects of dynamic strain ageing in J-R fracture resistance of SA516-Gr.70 piping steels | |
| J. H. Yoon, B. S. Lee, J. H. Hong |
| Effects of heterogeneity on the strength of 3D composites | |
| S. Mahesh, S. Leigh Phoenix, I. J. Beyerlien |
| Effects of noble gas environments on fatigue crack growth in titanium alloys | |
| M. Shimojo, R. Kusama, M. Otsubo, Y. Higo |
| Effects of plastic strain on cleavage fracture predictions in steel | |
| S. R. Bordet, A. D. Karstensen, C. S. Wiesner, D. M. Knowles |
| Effects of static stress on anodic polarization behavior of Ti-4.5Al-3V-2Mo-2Fe alloy | |
| N. Hyakutake, M. Takagaki, J. Komotori, A. Ogawa, K. Minakawa |
| Effects of stress ratio on striation formation under cyclic loading conditions in polymethyl methacrylate (PMMA) | |
| C. Ishiyama, K. Kobayashi, T. Asai, Y. Higo |
| Effects of T-stress and void nucleation on cohesive zone model predictions for ductile fracture | |
| V. Tvergaard |
| Elastic instability of alloys by hydrogenation: Molecular dynamics study of hydrogen-induced amorphization | |
| M. Katagiri, H. Onodera |
| Electromechanical modeling of unidirectional CFRP composites | |
| Y. Okabe, N. Tanaka, T. Mitzutani, S. Yashiro, N. Takeda |
| Electromechanical modeling of unidirectional CFRP composites | |
| T. Okabe, J. B. Park, N. Takeda |
| Elevated temperature fracture and crack growth in TiAl base intermetallics | |
| B. Dogan |
| Embrittlement of high strength B-Ti alloys | |
| R. P. Gangloff |
| Energy balance method for predicting cracking in cross-ply laminates during bend deformation | |
| N. McCartney |
| Environmental effects on crack growth in continuous fiber SiC-composites | |
| C. H. Henager |
| Environmental effects on fracture and sub-critical crack growth evaluation for life time prediction | |
| T. Shoji |
| Environmentally assisted fracture behavior of silicon microelements | |
| K. Komai, K. Minoshima, T. Terada |
| Equilibrium length of a Zener-Barenblatt nanocrack wedged open by a disclination dipole | |
| M. S. Wu |
| Error estimation of shape changes during fatigue crack growth | |
| T. D. Righiniotis |
| Estimation of creep crack growth from circular notched specimen | |
| T. Adachi |
| Estimation of dynamic stress intensity factors for beams and cylindrical specimens | |
| S. Y. Kovchyk, V. M. Boyko, I. V. Khodan, I. D. Skrypnyk |
| Estimation of high cycle fatigue limit of hard shot peened austenitic stainless steel | |
| K. Masaki, Y. Ochi, T. Matsumura |
| Evaluation of a brittle fracture accidents that occurred at the Hyogo-Ken Nanbu earthquake | |
| M. Toyosada, K. Gotoh, Y. Watanabe, S. Nakayama |
| Evaluation of bond properties of crack injection repair for concrete structures | |
| K. Rokugo, M. Kunieda, T. Kamada |
| Evaluation of fracture toughness of ceramics/metal functionally graded material by three-point bending test | |
| K. Tohgo, T. Suzuki, H. Araki, H. Ishii |
| Evaluation of high-cycle fatigue life of aluminum cast alloy from meso-level consideration | |
| H. Noguchi, T. Miyazaki |
| Evaluation of stress intensity factors of spot welded joints using meshless method | |
| K. Shimizu, N. Tomioka, A. Okabe |
| Evaluation of thermal and elastic properties for solid surfaces using transient reflecting grating method | |
| K. Katayama, Q. Shen, A. Harata, T. Sawada |
| Evolution of fracture of steels at a temperature of 4.2 k under the action of electric current pulses | |
| V. A. Strizhalo, L. S. Novogrudsky |
| Experimental and analytical studies on peeling behaviour and spalling resistance effect of externally bonded continuous fiber sheets | |
| Z. Wu, T. Asakura, H. Yoshizawa, H. Yuan, A. Kobayashi, T. Takahashi |
| Experimental and finite element analysis of fracture criterion of extra deep drawn steel sheets | |
| D. M. Kulkarni, R. Prakash |
| Experimental failure modes and finite element analysis of lightweight ceramic ablator materials under iosipescu shear testing | |
| S. Nagasawa, K. E. Parmenter, K. Shuman, F. Milstein |
| Experimental investigation of the inertial effects occurring in impact tests on plastics with varying mass distribution | |
| A. Pavan, G. Barbaglia |
| Experimental investigation on the influence of surface engineering on thermal fatigue of a hot work tool steel | |
| A. Persson, J. Bergstrom, C. Burman, S. Hogmark |
| Experimental research on fracture and fatigue of SCT specimen simulating high-strain region of pressure vessel nozzels | |
| X. Chen, T. Yang, W. Jin, J. Jiang, C. Cheng |
| Experimental study on effect which mechanical properties of beam materials on deformation capacity of beam/column connections | |
| T. Nakagomi, K. Matoba, Y. Ichikawa |
| Experimental study on the effect of plastic constraint on ductile tearing | |
| Q.-F. Li, L. Li, S.-l. Yang, P. Long, X.-T. Han, H.-G. Cao |
| Experimental validation of T* Integral | |
| A. S. Kobayashi, S. N. Atluri |
| Experimental validation of T* Integral | |
| A. S. Kobayashi, S. N. Atluri |
| Experimental-numerical analysis of mechanisms of damage initiation in tool steels | |
| L. Mishnaevsky Jr, N. Lippmann, S. Schmauder |
| Explicit modeling of damage initiation and evolution in open hole composites | |
| E. Iarve |
| Failure analysis of a particulate composite cutoff wheel with fiber reinforcing | |
| T. J. Mackin, H. Inglis |
| Failure analysis of the girth gear of an industrial ball mill | |
| M. Mirzaei, A. Razmjoo, A. Pourkamali |
| Fatigue and fracture behaviour of a laser heat treated martensitic high-nitrogen steel | |
| M. Heitkemper, C. Bohne, A. Pyzalla, A. Fischer |
| Fatigue and fracture of Cu-SiO2 alloys at elevated temperatures | |
| H. Miura, T. Sakai |
| Fatigue and fracture properties of CO-FE at 150°C | |
| E. Guglielmino, V. Filardi, S. Harris, T. Hyde |
| Fatigue and hydrogen cracking in cannons with mechanical and thermal residual stresses | |
| J. H. Underwood, A. P. Parker, E. Troiano, G. N. Vigilante, M. D. Witherell |
| Fatigue behaviour of a laser beam welded Ni-base superalloy during high temperature cyclic deformation | |
| T. Spirowski, A. Fischer, R. Saggau, H. Pries, H. Wohlfahrt |
| Fatigue behaviour of a micro-sized austenitic stainless steel with fine grains | |
| G. P. Zhang, K. Takashima, M. Shimojo, Y. Higo |
| Fatigue behaviour of a pultruded glass-reinforced polymer-matrix composite material | |
| L. B. Godefroid, W. A. Morais, G. P. Silva, J. A. Martins |
| Fatigue behaviour of a single crystal nickel superalloy used in heavy-duty gas turbine blade with thin film cooling | |
| Y. Pan, R. Zimmer, B. Bischoff-Beiermann, D. Goldschmidt |
| Fatigue behaviour of multiphase steels for automotive applications | |
| L. Tosal-Martinez, J. Keichel, N. Akdut |
| Fatigue behaviours of a martensitic compressor valve stainless steel with small amount of retained austenite | |
| G. Chai, S. Olsson, P. Liu, T. Larsson |
| Fatigue crack growth acceleration effects under helicopter loading spectra | |
| V. Zitounis, P. E. Irving, D. Matthew, R. Cook, S. Jenkins |
| Fatigue crack growth behaviour of micro-sized specimens prepared from amorphous alloy thin films | |
| K. Takashima, Y. Higo, M. V. Swain |
| Fatigue crack growth in ferroelectrics driven by cyclic electronic loading | |
| D. Fang, B. Liu, Z. hang, K. C. Hwang |
| Fatigue crack growth predictions in AA 5083 and AA 2024 using a simple geometric model | |
| T. Riemslag, K. van Kranenburg, S. Benedictus-de Vries, F. Veer, J. Zuidema |
| Fatigue crack growth under simple variable amplitude load sequences | |
| L. P. Borrego, J. M. Ferreira, J. M. Costa |
| Fatigue crack growth with tensile residual stresses | |
| Y. Prawoto, R. A. Winholtz |
| Fatigue crack initiation (FCI) life prediction for a flat plate with a central hole | |
| T.-L. Teng, C.-C. Liang, P.-H. Chang |
| Fatigue crack initiation and propagation from reinforcement fiber ends for Ti-alloy matrix composites | |
| K. Hirano, S. Miyake, H. Yoshida |
| Fatigue crack propagation limit curves for metallic and non-metallic materials | |
| J. Lukacs |
| Fatigue crack propagation of dissimilar metal welds | |
| C. S. Kusko, J. N. DuPont, A. R. Marder, S. Spooner |
| Fatigue damage and compressive residual strength of a woven PMC subjected to cyclic hygrothermal conditioning | |
| M. G. Castelli, J. C. Thesken |
| Fatigue damage and repair of 250 kN portal crane in shipyard | |
| Z. Domazet, Z. ozina, T. Pirsic |
| Fatigue damage in advanced polymer matrix composites | |
| H. E. Carroll, T. J. Mathams, D. M. Knowles, A. J. Davies |
| Fatigue damage in unidirectional laminate composites under constant stress and constant strain loading conditions: a comparative study | |
| N. Bonora, M. Newaz |
| Fatigue fracture plane direction assessment through the weight function method | |
| A. Carpinteri, A. Karolczuk, E. Macha |
| Fatigue life calculation of fillet-rolled components at axial cyclic loading | |
| M. Richter, T. Seeger |
| Fatigue life extension of austenitic stainless steel using nano-sized-martensites formed at intersections of dislocations | |
| T. Inamura, M. Shimojo, K. Takashima, Y. Higo |
| Fatigue of steel structures | |
| P. Broz |
| Fatigue Prediction of the Life time of screw on a large range of mean stresses | |
| A. Duval, P. Robinet, F. Trivaudey, P. Delobelle |
| Fatigue reliability evaluation and fracture analysis at elevated temperature related to safety guarantee of industrial use Pt alloy | |
| S. Hitomi, H. Suzuki, M. Nakamura |
| Fatigue strength and fracture mechanism of silicon nitrides studied by AE waveform simulation | |
| A. Yonezu, T. Ogawa, M. Takemoto |
| Fatigue-creep interactions in solder alloys | |
| J. E. Moffatt, W. J. Plumbridge |
| FEM simulation of mixed mode crack propagation induced by hydraulic fracturing | |
| K. Sato, M. Itaoka, T. Hashida |
| Fiducial marks as a measure of thin film crack arrest toughness | |
| A. Volinsky, M. L. Kottke, I. S. Adhihetty, W. Gerberich |
| Finite deformation energy release rate computations in a steady rolling tire | |
| S. Govindjee |
| First principles molecular dynamics calculation on the tensile strength of Ai grain boundary | |
| G. H. Lu, M. Kohyama, R. Yamamoto |
| First-principle and classical molecular dynamics study on tensile and shear strength of silicon nitride | |
| S. Ogata, H. Kitagawa, N. Hirosaki |
| First-principles calculations of the tensile strength and fracture of coincidence tilt boundaries in SiC | |
| M. Kohyama |
| Flow and fracture of free-standing metallic thin films and multilayers | |
| F. Spaepen, H. Huang |
| Flowstress of steel at large strains and high strain rates | |
| G. Pape, M. Janssen, A. Bakker |
| Fluid-structure interaction related aspects during the grouting of cracks in concrete | |
| H. N. Linsbauer |
| Foreign object damage and high-cycle fatigue thresholds in Ti-6-6Al-4V | |
| J. O. Peters, B. L. Boyce, J. M. McNaney, R. O. Ritchie |
| Formal considerations about fracture: nucleation and growth | |
| J. P. Sethna |
| Formation and evaluation of HAp films by electrochemical method | |
| S. Ozone, Y. Kimura |
| Formation of hierarchial ordered crack systems at fracture | |
| R. V. Goldstein, N. M. Osipenko |
| Formation of hierarchical ordered crack systems at fracture | |
| H. Kisu, Y. Kondo, G. Rong |
| Formation of TiO2* thin film by ion-beam-mixing method and its application as the corrosion protecting film | |
| Y. Kimura, H. Saito |
| Fractal and fracture mechanics analyses on fatigue fracture surfaces of metallic materials | |
| T. Sakai, T. Sakai, A. Ueno |
| Fractal fracture surfaces and fluid displacement process in fractured rocks | |
| T. Babadagli, K. Develi |
| Fractographic analysis of fish-eye type fatigue crack in two high strength steels | |
| K. Mori, A. Uchiyama, Y. Yamada |
| Fractography of S.E.N. soft soldered composite laminates made from 0.8% carbon manganese steel under plane strain conditions | |
| M. R. Sabayo |
| Fracture and creep rupture behavior of notched oxide/oxide and SiC/SiC composites | |
| R. John, D. J. Buchanan, L. P. Zawada |
| Fracture and fatigue behaviour of toughened DRA, AI-Be, and bulk metallic glass composites | |
| J. J. Lewandowski, J. Larose, S. Solv'yev |
| Fracture and multi-scale simulations of thin films structures | |
| R. H. Dauskardt |
| Fracture at compression | |
| R. V. Goldstein |
| Fracture behavior of conductive cracks in PZT-4 piezoelectric ceramics | |
| T. H. Wang, R. Fu, T. Y. Zhang |
| Fracture behaviour of a corroded annular plate under a multi-axial stress state | |
| M. Ohashi |
| Fracture behaviour of a fibre-bridged crack | |
| X. Zhang, H.-Y. Liu, Y.-W. Mai |
| Fracture behaviour of a SiCw/6061Al alloy composite under cyclic loading | |
| L. Wang, T. Kobayashi, Z. M. Sun, H. Toda |
| Fracture behaviour of blends consisting of asymmetric styrene/butadiene block copolymers | |
| R. Adhikari, R. Lach, G. H. Michler, R. Weidisch, W. Grellmann |
| Fracture behaviour of injection moldings with weld line | |
| H. Hamada, K. Yamada, K. Tomari |
| Fracture control in glass through lamination | |
| F. A. Veer, S. Benedictus-de Vries, C. van Kranenburg |
| Fracture criterion for piezoelectric materials with defects based on energy density theory | |
| A. K. Soh, D. Fang, K. L. Lee |
| Fracture evaluation of in-situ sensors for high temperature applications | |
| S. C. Forth, A. Stroselsky |
| Fracture in chromium: an attempt to improve ductility | |
| R. Wadsack, R. Pippan, B. Schedler |
| Fracture in metakaolin concrete under different loading conditions | |
| B. B. Sabir, S. Wild |
| Fracture initiation and crack growth - cohesive zone modeling and stereoscopic measurements | |
| C. R. Chen, O. Kolednik, F. D. Fischer, I. Scheider, T. Siegmund, A. Tatschl |
| Fracture mechanical characterization of semicrystalline thermoplastics | |
| H. H. Kausch, Ph. Beguelin, Ch. Grein, C. J. G. Plummer |
| Fracture mechanics and durability of high performance concrete | |
| F. H. Wittmann |
| Fracture mechanics characterisation of epoxy resins by means of mini-compact-tension-specimens | |
| C. Bierogel, H. Walter, W. Grellmann, H. Henning, B. Michel |
| Fracture mechanics evaluation of post yield fatigue crack initiation and propagation | |
| G. S. Wang, A. F. Blom |
| Fracture mechanics models for the analysis of composite materials with a nonlinear matrix | |
| A. Carpinteri, G. Ferro, G. Ventura |
| Fracture mechanism of a bainite steel in pre-cracked and notched specimens at low temperature | |
| C. Yan, O. H. Qin, J. H. Chen |
| Fracture mechanisms for SiC fibers and SiC/SiC composites under stress-rupture conditions at high temperatures | |
| J. A. Di Carlo, H. M. Yun, J. B. Hurst |
| Fracture mechanisms in B2 NiTi shape memory alloys | |
| N. Yang |
| Fracture of concrete cylinders subjected to torsion | |
| G. Lilliu, J. G. M. van Mier |
| Fracture of Ferritic Steels; the effects of the Ductile Brittle Transition on Carbides within the Plastic Zone | |
| M. D. Coates, S. G. Roberts |
| Fracture of nanostructured FCC materials | |
| F. Ebrahimi |
| Fracture of piezoelectric materials | |
| T. Y. Zhang, M. H. Zhao |
| Fracture of thermal sprayed nanostructured coatings | |
| M. Gell, L. Shaw, E. Jordan, H. Luo, D. Goberman |
| Fracture of verbetral bone gotten surgical screw insertion | |
| T. Tamaki, S. Nguyen, K. Takahashi, M. Yamagata |
| Fracture predictions for ductile steel | |
| G. Pape, M. Janssen, A. Bakker |
| Fracture process of PM Ti6A14V at 20K in presence of impurities | |
| L. Briottet, N. Scheer, D. Guichard |
| Fracture strength degradation of Si-based ceramics by molten salt corrosion | |
| N. Masuda, Y. Kimura |
| Fracture strength of ceramic nozzle blades under thermal shock conditions | |
| T. Mikami, K. Tagashira, M. Obata |
| Fracture toughness and failure mechanism of polymer-introduced porous Hap composites | |
| H. Suemasu, T. Wada, M. Aizawa, K. Gozu, A. Nozue, K. Itatani |
| Fracture toughness and fracture processes in ductile metallic foams | |
| C. Motz, R. Pippan |
| Fracture toughness characterization of hydrogen embrittled Cr-Mo steel | |
| Y. Wada, Y. Tanaka |
| Fracture Toughness Envelope of a Limestone Rock at High Confining Pressure and Temperature | |
| N. A. Al-shayea, K. Khan |
| Fracture toughness measurement of small cracks in high strength steel wire | |
| B. Bromage, T. J. Marrow |
| Fracture toughness of niobium/sapphire interfaces: effect of interface doping and ion assisted deposition | |
| G. S. Was, H. Ji |
| Fracture toughness of polymer interfaces: From the molecular to the continuum scale | |
| C. Creton, E. J. Kramer, H. R. Brown, C. Y. Hui |
| Fracture toughness tests for micro-sized specimens | |
| K. Takashima, Y. Ichikawa, Y. Higo, M. V. Swa |
| Free edge and interaction effects on the strength of finite-sized interface bonds | |
| H. M. Jensen |
| Functionally graded materials: effect of elastic heterogeneity on the toughness | |
| V. Cannillo, W. C. Carter |
| Grain boundary resistance to cleavage fracture in Fe-3% si alloy and FE polycrystals: experiments and modeling | |
| A. S. Argon, Y. Qiao |
| Grain size effect on fatigue crack initiation condition observed by using atomic-force microscopy | |
| Y. Nakai, K. Maeda |
| Growth of cracks in steel under repeated thermal shock in a chemically controlled environment | |
| J. W. H. Price, B. B. Kerezsi, R. Ibrahim |
| Growth of fatigue cracks from cold expanded holes | |
| M. J. Pavier, A.A. Garcia-Granada, V. D. Lacarac, D. J. Smith |
| High resolution analytical characterization of stress corrosion crack tips | |
| S. M. Bruemmer, L. E. Thomas |
| High speed debonding and frictional sliding in composite systems: experimental observations and numerical simulation | |
| J. Lambros, X. Bi, P. H. Geubelle |
| High strain rate behaviour of high strength steels for automotive applications | |
| O. Moriau, P. Verleysen, J. Degrieck, N. Akdut |
| High strain rate deformation behavior of Al-Mg alloys | |
| T. Masuda, T. Kobayashi, H. Toda |
| High temperature creep damage of fabricated structures | |
| F. W. Brust |
| Hydrogen effects on the localization of plastic deformation at a crack tip: implications for fracture | |
| P. Sofronis, Y. Liang |
| Hydrogen induced crack growth rate in steel plates under uniaxial stress | |
| J. L. Gonzalez, R. Ramirez, J. M. Hallen |
| Hydrogen/length scale interactions during small volume yielding and fracture | |
| W. Gerberich, N. I. Tymiak |
| Hydrogen, Hydrides, and Crack Tip Deformation in Titanium | |
| C. L. Briant, Z. F. Wang, K. S. Kumar |
| Hydrogen, hydrides and crack tip deformation | |
| C. L. Briant |
| Image analysis of hydrogen-assisted micro-damage in progressively drawn pearlitic steel | |
| J. Toribio, F. J. Ayaso, E. Ovejero |
| Impact strength of cracked structural member | |
| I. Maekawa, K. Uda |
| Impact welding of aluminium tube to a stainless steel target - effect of deformation of tube on bonding condition | |
| H. Date |
| Importance of crack tunneling during fracture: experiments and CTOA analyses | |
| M. A. James, J. C. Newman |
| Improvement of mechanical properties of alumina particulate composites using polycrystalline alumina powder | |
| K. Kageyama, K. Ohi, H. Kato |
| Improving the adhesion strength of PET/PMMA composite by radio frequency plasma treatment | |
| M. O. H. Cioffi, H. J. C. Vorwald |
| In search of a parameter for fretting fatigue | |
| T. Nicholas, A. Hutson, S. Olson, N. Ashbaugh |
| In vitro bioactive functional and fracture strength of biomaterial in a simulated body fluid | |
| N. Hisamori, A. Nozue, M. Aizawa, H. Suemasu |
| In-situ characterization of matrix response to fiber fractures | |
| J.C. Hanan, I.J. Beyerlein, E. Ustundag, G.A. Swift, B. Clausen, D.W. Brown |
| In-situ ultrasonic characterization of fatigue crack initiation and evolution from surface damage | |
| S.I. Rokhlin, J.-Y. Kim |
| Indentation-induced damage of thin-films supported on substrates | |
| A. H. W. Ngan |
| Inducing 'pure' mode II shear failures in laminated composites | |
| S. R. Short, C. P. Sastry |
| Inelastic cyclic stress-strain response in silicon-nitride ceramics at elevated temperatures | |
| K. Hatanaka, K. Oshita, Y. Ishiga, H. Toyama |
| Inelastic cyclic stress-strain response in silicon-nitride ceramics at elevated temperatures | |
| K. Hatanaka, K. Oshita, Y. Ishiga, H. Toyama |
| Influence coefficients to calculate stress intensity factors for an elliptical crack in a plate | |
| P. Le Delliou, B. Barthelet |
| Influence of annealing process on ultrafast carrier dynamics for an ion-implanted silicon surface | |
| H. Donen, Y. Inagaki, K. Katayama, M. Fujinami, T. Sawada |
| Influence of hydrostatic pressure on multiaxial fatigue of notched components | |
| G. Quilafku, G. Pluvinage |
| Influence of loading changes on the fatigue crack growth | |
| M. Sander, H. A. Richard |
| Influence of loading rate on shear fracture toughness for failure mode transition | |
| J. F. Kalthoff, A. Burgel |
| Influence of phase transformation on subcritical crack growth in numerical modelling of a ceramic composite | |
| T. Niezgoda, W. Szymczyk, J. Zurek |
| Influence of residual stress on ductile crack initiation and growth in dissimilar metal weld joints | |
| A. Sherry, D. Lidbury, D. Beardsmore |
| Influence of residual stress on super-long life fatigue properties of high strength steel SNCM439 | |
| T. Matsumura, Y. Ochi, S. Yoshida, K. Masaki |
| Influence on low cycle fatigue properties of bond coat oxidation for a thermal barrier coating | |
| H. Brodin, S. Johansson |
| Inhomogeneity effects on crack growth | |
| N. K. Simha, F. D. Fischer, O. Kolednik |
| Initial cracks in saturated swelling soils | |
| V. Y. Chertkov |
| Interface crack in a periodically layered bimaterial composite | |
| M. Ryvkin, L. Kucherov |
| Interfacial adhesion and crack initiation at metal/ceramic interface | |
| S. X. Mao, M. Z. Li |
| Interfacial force microscopy studies of y-APS on glass and SI02 | |
| K. M. Liechti, K. C. Vajapeyajula, M. Wang, H. Cabibil, H. Celio, J. M. White |
| Internal damage to wire ropes on crane: Case studies of fracture accidents and countermeasures for prevention | |
| M. Tanaka |
| Introduction of the hamiltonain system into the asymptotic analysis in fracture mechanics | |
| J. Li |
| Investigation of fracture criterion for composite using CTS specimen | |
| R. Rikards, A. K. Bledzki, F.-G. Buchholz |
| Investigation on oblique impact response of composite cylindrical shells | |
| W. Z. Nie, W. K. Binienda |
| Issues in fracture toughness and r-curve behavior of particle reinforced metal matrix composites | |
| B. S. Majumdar |
| K-R curves of thin 2195-T8 aluminium alloy plate | |
| R. Doglione, D. Firrao |
| Kic - a non measure of plane strain fracture toughness | |
| K. Wallin |
| Length scales for the fracture of nanostructures | |
| W. Gerberich |
| Loading rate dependence of mode I fracture behavior of rubber toughened PMMA | |
| M. Todo, K. Takahasi |
| Local fracture properties in MMC's | |
| O. Kolednik, I. Sabirov |
| Long term prediction of fatigue life for FRP joint systems | |
| Y. Miyano, M. Nakada, N. Sekine, S. W. Tsai |
| Low cycle fatigue of alumina | |
| M. T. Kokaly, A. S. Kobayashi, K. W. White |
| LRM constitutive model for describing functionally graded material with fast propagating crack | |
| M. Nakagaki, Y. Wu |
| Major aspects of mixed-mode problems | |
| H. A. Richard |
| Material response with cell method | |
| F. Cosmi |
| Materials with cracks and pores: micromechanics, cross-property correlations and applications | |
| M. Kachanov, I. Sevostianov |
| Mathematical model of a crack on an imperfect interface | |
| Y. A. Antipov, A. B. Movchan |
| Measuring crack tip deformation with nanoscopic resolution | |
| Y. M. Xing, W. Yang |
| Mechanical and fracture properties of methacrylic particle-modified PVC | |
| Y. Nakamura, E. Takekuni, Y. Kinugawa, T. Iida |
| Mechanical behavior and electrical resistance change in carbon particle dispersed plastic composite | |
| D.-Y. Song, Y. Hirata, N. Takeda |
| Mechanical properties of ionomer/clay nonocomposite-modified epoxy | |
| S. Matsuda, H. Akimoto, A. Murakami |
| Mechanical properties of tungsten fiber reinforced Ti-6A1-4V alloy by HIP fabrication | |
| S. Y. Son, S. Nishida, N. Hattori, K. Hayashi, K. Nakano |
| Mechanical properties, adhesion and fracture toughness of low-k dielectric thin films for microelectronic applications | |
| I. Adhihetty, J. Vella, A. Volinsky, C. Goldberh, W. Gerberich |
| Mechanics-based modeling of dynamic fragmentation and comparison with experiments | |
| W. J. Drugan |
| Mechanisms of fracture in pearlitic steels with different degrees of cold drawing | |
| J. Toribio, F. J. Ayaso, M. Toledano |
| Mechnical behaviour and electrical resistance change in carbon particle dispersed plastic composite | |
| D.-Y. Song, Y. Hirata, N. Takeda |
| Meso-fracture of metal matrix composites reinforced by particles of large volume fraction | |
| W. Yang, C. Zhou, D. Fang |
| Mesodamage of 2024-T3 aluminum alloy specimen due to corrosion-induced localized hydrogen embrittlement | |
| A. T. Kermanidis, P. Papanikos, S. G. Pantelakis |
| Method for estimating service load from striation width and height | |
| K. Furukawa |
| Microelectromechanical structures for multi-axial fatigue testing | |
| K. Komvopoulos |
| Micromechanical modeling of hydrogen-induced fracture modes in IN903 | |
| B. P. Somerday, N. R. Moody |
| Micromechanics based approach to the damage and ultimate failure of brittle matrix composites | |
| J. Lamon |
| Micromechanics in graphite fiber/epoxy composites during creep | |
| C. H. Zhou, L .S. Schadler, I. J. Beyerlein |
| Micromechanisms of fatigue in polysilicon MEMS structures | |
| S. Allameh, P. Shrotriya, B. Gally, S. Brown, W. O. Soboyejo |
| Microstructural features of short crack growth in a Beta-titanium Alloy | |
| U. Krupp, W. Floer, H.-J. Christ, A. Schick, C.-P. Fritzen |
| Microstructure and mechanical properties of laser cladded steel plates | |
| S. Niederhauser, B. Karlsson |
| Mixed mode I/II fracture toughness of mild steel | |
| M. Srinivas, S. V. Kamat, P. Rama Rao |
| Mode-I delamination characterisation of cross-ply fibre-metal laminates | |
| J. Laliberte, P. V. Straznicky, C. Poon |
| Model of mechanics for fiber reinforced Ti alloy matrix composites under thermomechanical loading | |
| L.-S. Niu, Q.-Y. Hu, H.-J. Shi, C. Robin |
| Modeling of crack-opening stress levels under different service loading spectra and stress levels for a 1045 annealed steel | |
| M. Khalil, T. H. Topper, K. Soudki |
| Modeling of residual stress effects using eigenstrain | |
| M. R. Hill |
| Modeling the effects of residual stresses on cleavage fracture in welded steel frames | |
| C. G. Matos, R. H. Dodds |
| Modelling crack propagation: a phase field approach | |
| L. O. Eastgate, J. P. Sethna, M. Rauscher, C. R. Myers, C. S. Chen |
| Modelling of damage evolution equation of PZT ceramics and its application to crack growth analysis | |
| M. Mizuno, Y. Honda, H. Kato |
| Modelling of plastic effects during small fatigue-crack growth | |
| O. Y. Andreykiv, V. V. Panasyuk, R. O. Ritchie, O. I. Darchuk |
| Modelling of size effects on fracture in the brittle-to-ductile transition regime | |
| A. H. Sherry, D. P. Lidbury, D. C. Connors, A. R. Dowling |
| Modelling of transversly isotropic blister test specimen | |
| F. S. Kadioglu |
| Modelling the effects of microstructure and microtexture on the statistics of short fatigue crack growth | |
| A. J. Wilkinson |
| Modelling the processes of micro-defects nucleation in thin-film interconnects of integrated circuits at electromigration | |
| R. V. Goldstein, M. E. Sarychev, D. B. Shirabaikin, A. S. Vladimirov, Y. V. Zhitnikov |
| Modified electrochemical emission spectroscopy (MEES) as NDT method of detection of SCC of metallic alloys | |
| K. Habib |
| Molecular dynamics simulation of crack propagation in HCP crystals | |
| S. Ando, K. Takashima, H. Tonda |
| Monitoring part-through crack growth using the compliance technique | |
| N. Parida, S. Tarfder |
| Morphology of cracks and damage in various materials | |
| E. Bouchaud |
| Multipass welding simulation of tig welded AISI 316LN | |
| C. H. L. J. ten Horn, G. W. Medendorp, J. Zuidema, A. Bakker, P. G. de Heij, D. d'Hulst |
| Multi-scale fatigue of As-cast lightweight structural metals | |
| K. Gall, M. Horstemeyer, D. L. McDowell, J. Fan, N. Yang |
| Nanoindentation and fracture analysis of thin solid films | |
| K. Sriram, R. Narasimhan, S. K. Biswas |
| Nano-indentation fracture with a corner cube indenter | |
| J. S. Field, R. Dukino, N. Iwashita, M. V. Swain |
| Near the fatigue limit in glass | |
| S. Wiederhorn |
| Near tip behaviour in a particulate composite material under constant strain rates including temperature and thickness effects | |
| C. T. Liu, C. W. Smith |
| New considerations and results on crack separation energy rated in elastic-plastic fracture mechanics | |
| Y. Wadier, E. Lorentz |
| New type steel having superior brittle crack arrestibility and its application to improve structural integrity | |
| T. Ishikawa, T. Inoue, Y. Hagiwara, H. Yajima |
| Non-contact detection of delamination in impacted cross-ply CFRP using laser generated lamb waves | |
| Y. Mizutani, H. Nishino, M. Takemoto, K. Ono |
| Nonlinear dynamics of crack propagation (experimental and theoretical study) | |
| O. Naimark, V. A. Baranninkov, S. V. Uvarov |
| Nonlinear fracture mechanics of delamination failure in a composite strengthened concrete beam | |
| C. K. Y. Leung, M. Klenke, W. K. Tung, H. C. Y. Luk |
| Notch effect of micro polycrystalline silicon cantilever | |
| S. Hamada, S. Tani, M. Horikawa, H. Otani, M. Tsugai, E. Yosikawa |
| Notch fracture mechanics: a review of fracture criteria used in elastic and elastroplastic cases | |
| G. Pluvinage |
| Notch fracture of MEMS sensors made of single crystal silicon | |
| Z. L. Zhang, W. Westby, T. Wang |
| Notch strength and notch sensitivity of polymethyl methacrylate | |
| H. Wang, J. Yan, X. Zheng |
| Notch strength of spheroidal graphite cast iron under tension loading | |
| K. Zhao, J. Sun, J. Yan, X. Zheng |
| Numerical investigation of fatigued composites under cyclic compression spectra | |
| A. Pelegri, D. Kedlaya |
| Numerical modelling of ceramic materials microstructures for residual stresses concentrations | |
| T. Niezgoda, W. Szymczyk, J. Malachowski, M. Woropay |
| Numerical representation of plastic J-Integral variation along the crack front of semi-elliptical surface crack under uniform tension | |
| M. H. Sharobeam, R. Stockton |
| Numerical simulation of concrete failure in pull-out experiments | |
| P. Pivonka, R. Lackner, H. A. Mang |
| Numerical simulation of crack tip fields and toughening mechanisms in ternary polymer blends | |
| T. Seelig, E. van der Giessen, D. Gross |
| Numerical simulation of micro and nano scale fracture | |
| M. Zhou |
| Numerical simulation of the surface fatigue crack growth using VCE method | |
| T. Nishioka, Q. Hu, T. Fujimoto |
| Numerical simulations of dynamic interfacial fracture phenomena | |
| T. Nishioka, Q. Hu, T. Fujimoto |
| Numerical study of the probability of fracture of glass under stress corrosion | |
| H. Auradou, D. Vandembroucq, C. Guillot, E. Bouchaud |
| Numerical, experimental, nondestructive, and image analyses of damage; progression in cast A356 aluminium notch tensile bars | |
| M. F. Horstemeyer, K. Gall, K. W. olan, A. aters, A. M. Gokhale, M. D. Dighe |
| Observation of fatigue crack initiation and early propagation in ultrafine-grained steel by atomic force microscopy | |
| H. Kimura, Y. Akiniwa, K. Tanaka, J. Kondo, T. Ishikawa |
| Offset method for determination of lower-bound fracture toughness in the transition temperature region | |
| T. Iwadate, H. Takemata |
| On anisotropy effects in ductile fracture: Theory and applications | |
| A. A. Benzerga, J. Besson, A. Pineau |
| On brittle fracture in FCC - metal | |
| P. Panfilov |
| On fatigue limit of notched components | |
| M. D. Chapetti, T. Tagawa, T. Miyata |
| On Predictive Modeling for the assessment of Fracture Behaviour in ferritic alloys | |
| A.N. Kumar |
| On size of quantum bag and cracking | |
| K. J. Cheng, S. Y. Cheng |
| On the applicability of the essential work of fracture method to thick abs Se(b)-specimens | |
| P. Luna, E. Lievana, C. Bernal, P. Frontini, Y.-W. Mai |
| On the crack extension force of curved cracks | |
| K. Eriksson |
| On the crack stability in metal particulate reinforced brittle matrix composites | |
| M. Kotoul, R. Urbis |
| On the detection of fatigue damage prior to surface indication | |
| G. Wheatley, D. Barton, K. Davey |
| On the ductile fracture in cylindrical tube bulging under impulsive loading | |
| Y. Sato, K. Kono, H. Ogawa |
| On the essential work of fracture: Application to characterise thin polymer films fracture | |
| L. Cousin-Cornet, M. Nait Abdelaziz, C. C. Cazeneuve, G. Mesmacque |
| On the fatigue crack tip driving force: Role of crack tip plasticity | |
| G. Glinka, R. L. Holtz, K. Sadananda, A. K. Vasudev |
| On the size scaling of cleavage toughness in the transition: A single variable experiment and model based analysis | |
| H. J. Rathbun, G. R. Odette, M. Y. He |
| Optimal shape design of stress releasing holes | |
| P. Pedersen |
| Optimization of a dynamic fracture process with 1D model | |
| H. Maigre |
| Optimization of delamination fracture toughness using design of experiments and genetic algorithms | |
| A. Pelegri, A. Tekkam |
| Optimizing cement-based coatings with respect to shrinkage crack formation | |
| G. Martinola |
| Optimizing structural integrity through reliable residual stress measurement | |
| L. Edwards |
| Oxide fiber-coatings for controlled fracture in robust ceramic composites | |
| R. Kerans |
| Oxygen enhanced crack growth in nickel-base superalloys under sustained and fatigue loading | |
| R. Wei, Z.-F. Huang, C. Miller, G. W. Simmon |
| Particulate toughening of unsaturated polyester: effect of particle size and volume fraction | |
| R. P. Singh |
| Plane stress and strain in side-grooved CCT-specimens | |
| C. van Kranenburg, T. Riemslag, S. de Vries, J. Zuidema, F. Veer |
| Plastic and buckling behaviours of tubular beams under combined bending and torsion | |
| G. H. Nie |
| Plastic behaviour of nano-scale silicon structure at intermediate temperatures | |
| Y. Isono, T. Namazu, T. Tanaka |
| Plastic flow and fracture of bulk nanocrystalline ceramics and intermetallics in indentation | |
| H. Kimura |
| Plastically dominant / elastically dominant fatigue interaction | |
| Y. K. Wong, X. Z. Hu, M. P. Norton |
| Plastic-damage model for stress-strain behaviour of soils | |
| N. Al-Shayea, K. Mohib, M. Baluch |
| Post-impact fatigue behavior of high temperature polymer matrix composites | |
| K. Hirano |
| Predicting the fatigue-life of structural adhesive joints | |
| A. J. Kinloch, A. J. Curley, H. Hadavinia, A. C. Taylor |
| Prediction for dry sliding wear in P/M alloy: A back-propogation ANN approach | |
| M. E. Haque, K. V. Sudhakar |
| Prediction of ductile crack growth in polyethylene using measured traction-separation curves | |
| J. G. Willams, K. C. Pandya, A. Ivankovic |
| Prediction of fatigue crack growth in martenistic high strength low alloy steels | |
| P. Hubner, G. Pusch |
| Prediction of fracture initiation at three-dimensional bimaterial interface corners: Application to butt-joints loaded in bending | |
| P. E. W. Labossiere, M. L. Dunn |
| Prediction of probability distribution of notch strength of ceramics | |
| J. Yan, X. L. Zheng, K. Zhao, H. Wang |
| Predictive model for the steady-state failure of adhesively-bonded joints with extensive plastic yielding | |
| T. Ferracin, T. Pardoen, F. Delannay, C. M. Landis, J. Y. Sener |
| Prestraining effect on creep creep behaviour of nickel-base superalloy | |
| Y. H. Zhang, D. M. Knowles |
| Probabilistic failure assessment of a carbon-carbon shell for the earth entry vehicle concept | |
| R. E. Kurth, F. W. Brust |
| Propagation of a fluid-driven penny-shaped fracture parallel to the free-surface of an elastic solid | |
| X. Zhang, R. Jeffrey, E. Detournay |
| Qualification of cleavage fracture toughness on the basis of local fracture criterion approach | |
| T. Miyata, T. Tagawa, C. E. Chaves |
| Qualification of cleavage fracture toughness on the basis of local fracture criterion approach | |
| T. Miyata, T. Tagawa, C. Chaves |
| Quasi-Micromechanical modelling of evolutionary damage in quasi-brittle solids | |
| X. Q Feng, S. W. Yu |
| Quench cracking resistance of powder metallurgy superalloys | |
| K. M. Chang |
| Rate and temperature dependence of the mechanical properties of cheddar cheese | |
| V. Imbeni, A. G. Atkins, G. Heronimidis, J. Yeo |
| Real-time health monitoring system available for any anisotropic condition on CFRP | |
| J. H. Koo |
| Real-time speckle interferogram analysis and its application to sub-surface delamination crack detection in carbon fibre composites | |
| J. M. Huntley, C. R. Coggrave, Y. Shen |
| Recent advances of photo-thermal spectroscopy | |
| T. Sawada, K . atayama |
| Recent developments in the Weibull Stress Model for prediction of cleavage fracture in ferritic steels | |
| X. Gao, R. Dodds |
| Reconstruction of fracture process of spheroidal graphite cast iron by analyzing the confocal scanning laser microscope images | |
| Y. Mori, Y. Obata, P. Kriengsak, T. Umeda, S. Nose |
| Re-examination of over specified condition of stress intensity factor for multi-material wedges and junctions | |
| W.-C. Wang, S.-W. Lin |
| Relationship between Rockwell C hardness and inelastic material constants | |
| A. Hirano, M. Sakane, N. Hamada |
| Residual strength analyses of single - and multiple-stiffened wide panels | |
| B. R. Seshadri, J. C. Newman |
| Residual stress effects on fatigue crack propagation in friction stir welds | |
| C. Dalle Donne, G. Raimbeaux |
| Residual stress estimated by new empirical method and its correlation with strength in ceramics | |
| T. Hoshide, J. Abe |
| Residual stress in piezolectric thin film prepared by pulse laser beam ablation | |
| Y.C. Zhou, Z. Y. Yang, X. J. Zhang, J.Y. Li |
| Resonance and crack propagation in prestressed orthotropic materials containing an inclined crack | |
| E. M. Craciun, E. Soos |
| Response and failure of composite structures exposed to fire | |
| K. Reifsnider, J. Burdette |
| Reverse bending fatigue failure of an emergency power turbine shaft | |
| N. S. Xi, P. D. Zhong |
| Reverse bulging and plugging in metal foil induced by high power laser | |
| Y. C. Zhou, Z. P. Duan |
| Revisited energy criteria for interface crack deflection | |
| D. Leguillon, C. Lacroix, E. Martin |
| Role of Nondestructive Evaluation for the Purpose of the Understanding Fracture Mechanism | |
| T. Kishi |
| Role of twining in brittle fracture: Intermetallic compounds | |
| M. H. Yoo |
| Roughness Waves as Detected on Glassy Materials by DCdc experiments in the Low Speed Regime: The Role of Microstructure | |
| C. Marliere, F. Despetis, J. Phalippou |
| Rubber-particle-size dependent strain rate effects on mechanical properties and de formation behaviour of high-impact polystyrene | |
| T. Kuboki, K. Takahashi, P. Y. Ben Jar, T. Shinmu |
| Scaling of quasi-brittle fracture: morphology of crack surfaces and asymptotic analysis | |
| S. Morel, E. Bouchaud, G. Valentin |
| Scientific support for the investigation of a helicopter collision | |
| K. P. Roberts, G. Clark |
| Scratch Testing and acoustic emission of nanostructured partially stabilized zirconia | |
| M. R. Gold, R. S. Lima, A. Kucuk, C. C. Berndt |
| Self-consistent constitutive modeling of particle dispersed composite materials with micro-crack type damage | |
| M. Nakagaki, H. Chang, Y. Wu |
| Self-Healing Polymer Composites | |
| S. White, E. N. Brown, M. R. Kessler, S. Sriram |
| Semi-weight function method of three dimensional problem in fracture mechanics | |
| L. Chuntu, M. Kaiping |
| Shape sensitivity and reliability analyses in nonlinear fracture mechanics | |
| G. Chen, S. Rahman |
| Shear lag modelling of thermal stresses in unidirectional composites | |
| C. M. Landis |
| Short fatigue crack growth under multiaxial nonproportional loading | |
| J. Hoffmeyer, R. Doring, T. Seeger, M. Vormwald |
| Simulation of adiabatic shear band propagations | |
| S. Li, W. K. Liu, A. J. Rosakis |
| Simulation of crack propagation in heterogeneous brittle solids: scaling parameters | |
| V. V. Silberschmidt |
| Simulation of damage mechanisms in high speed grinding of structural ceramics | |
| P. Geubelle, S. Maiti |
| Simulation of domain switch-toughening in ferroelectric ceramics | |
| M. Kuna, A. Ricoeur |
| Simulation of fatigue crack propagation processes in arbitrary three-dimensional structures with the program system | |
| M. Fulland, M. Schollman, H. A. Richard |
| Simulation of fatigue crack propagation rates in smooth bending specimens, from the onset of loading, using the two-term model | |
| H. Saguy, M. P. Weiss, D. Rittel |
| Simulation of probability distribution of fatigue life of notched friction welded joints under variable-amplitude loading | |
| J . an, X. L. Zheng, K. Zhao, H. Wang |
| Simulation of propagation of small fatigue cracks interacting with grain boundary | |
| A. Akiniwa, K. Tanaka, H. Kimura |
| Simulation transverse fracturing of thin plastic sheet | |
| B. J. Carter, A. R. Ingraffea, Y.-H. Lai |
| Size effect of corrosion fatigue properties in micro-sized 304 austenitic stainless steel specimens | |
| Y. Mizutani, M. Shimojo, K. Takashima, Y. Higo |
| Slow brittle fracture | |
| C.J. McMahon Jr. |
| Small fatigue crack initiation and growth behavior of Fe-0.5Ni-1Mo sintered steel | |
| A. Sugeta, M. Jono, Y. Uematsu |
| Softening behaviour of plain concrete beams | |
| A. P. Fantilli, P. Vallini |
| Software methodologies for multiscale descriptions of defects, deformation and fracture | |
| C. Myers, C.-S. Chen, T. Cretegny, N. P. Bailey, A. J. Dolgert, L. O. Eastgate |
| Some aspects of fatigue crack propagation after overloading cycles | |
| M. Da Silva Ramos, M. Venicius Soares Pereira, M. Venicius Soares Pereira |
| Spalling of railway tunnel concrete and its causes | |
| T. Asakura, K. Mizuno, K. Yashiro, T. Muguruma, Y. Matsuda |
| Spatial statistics of particle clusters and modelling of pitting corrosion | |
| D. Harlow, R. P. Wei |
| SQUID damage monitoring for austenitic stainless steel | |
| T. Suzuki, K. Hirano, T. Terawoto |
| Standardisation of creep/fatigue crack growth in components | |
| K. M. Nikbin |
| Static and dynamic fracture properties of high strength steel chain materials | |
| D. M. Shuter, J. T. Dutton, W. Geary |
| Statistical Study of Fracture in Concrete | |
| T. K. Wang, J. M. C. van Mier, T. N. Bittencourt |
| Statistics of acoustic emission in paper fracture | |
| L. I. Salminen, M. J. Alava, K. J. Niskanen |
| Statistics of chemical and mechanical fractures of corroded solids | |
| A. Baldassarri, A. Gabrielli, B. Sapoval |
| Stereoscopic fracture analysis by SEM using stero matching and secondary electron integrating signals | |
| J. Jiang, S. Sakai |
| Stochastic analysis of fatigue crack growth | |
| C. Proppe, G.I. Schueller |
| Strain energy density as the link between global and local approach to fracture | |
| H. J. Schindler |
| Strength evaluation of the ECCS-GDH piping connection and determination of the critical crack under waterhammer event | |
| G. Dundulis, E. Uspuras |
| Strength properties in substrate for semiconductor electronic devices by thermal cyclic test | |
| N. Okabe, M. Tsutsumi, X. Zhu, Y. Abe |
| Stress analysis and life assessment of a gas turbine blade | |
| M. Mirzaei, R. Karimi |
| Stress analysis near crack tip in mixed-mode condition by speckle photography | |
| K. Machida, K. Ushi, H. Okamura |
| Stress analysis of beam-to-column connection for earthquake-resistance welded steel structure based on FEM | |
| Z. Yufeng, Y. Guochun, H. Lixing, Y. Xinqi, J. Hongyang |
| Stress corrosion crack growth behaviour of austenitic stainless steels in hot concentrated chloride solution | |
| H. Shaikh, H. S. Khatak, P. Rodriguez |
| Stress corrosion cracking mechanism on the basis of the interaction model of dislocation and hydrogen around a crack tip | |
| A. T. Yokobori, J. C. Ha, T. Shoji, S. Taketomi, G. F. Li |
| Stress intensity factor error index for finite element analysis with singular elements | |
| T. Meshii, K. Watanabe |
| Stress intensity factor of 3D plane cracks under mode I loading | |
| V. Lazarus |
| Stress singularities within the cellular core of a sandwich plate | |
| W. Becker, J. Hohe, S. Goswami |
| Studies on deformation and fracture behaviour of welded plate for a super steel | |
| F. Tian, Y. Shi |
| Studies on initiation toughness and tearing resistance in weld joints of an offshore structural steel | |
| R. K. Pandey, G. K. Purohit, R. S. Parmar |
| Study of effects of Notch-Tip and crack-tip Plasticity on Short Fatigue Crack Growth | |
| W. Li, X. Zhang, Y.-W. Mai, L. Ye |
| Study on crack-nucleating damage of hydraulic concrete | |
| Z. Lixiang, L. Qingbin, F. Bohao |
| Study on crackpath stability/Instability in a body | |
| D. A. Zacharopoulos |
| Study on propagation law of surface fatigue crack at notch root in low cycle fatigue under in-plane bending | |
| K. Shingai, Y. Yoshi, D. Fukui |
| Study on superlong life fatigue in high strength steels | |
| Y. Ochi |
| Subcase crack propagation threshold and microhardness profile influence in rolling contact fatigue of carburised components | |
| G. Donzella, A. Mazzu, L. Solazzi |
| Suppression of transverse cracks in CFRP laminates with embedded SMA foils | |
| N. Takeda, M. Kobayashi, T. Okabe |
| Surface and interface characterization of ferritic stainless steel by 57Fe CEMS | |
| K. Nomura, T. Terai, T. Sawada |
| Temperature and aging effects on ultimate bearing strength and fatigue of polymeric composite joints | |
| W. S. Johnson, W. A. Counts |
| Temperature dependence of damage behavior in a silicon nitride for gas turbine by spherical particles | |
| Y. Akimune, N. Tooyama, T. Akiba, F. Munakata |
| Temperature dependence of fracture toughness in a micro-sized Ni-P amorphous alloy | |
| R. Tarumi, M. Shimojo, K. Takashima, Y. Higo |
| Tensile and fatigue fracture of discontinuously reinforced aluminum alloys (DRA) | |
| N. Chawla, J. J. Williams, G. Piotrowski, R. Saha |
| Tensile and low cycle fatigue standard testing for solders - JSMS recommendation | |
| M. Sakane, H. Nose, M. Kitano, H. Takahashi, M. Mukai, Y. Tsuka |
| Tensile fracture and creep-rupture behaviour of SiC Fibers | |
| H. M. Yun, J. A. Di Carlo |
| Tension fatigue analysis for woven composite laminates | |
| R. A. Naik |
| The analysis of the compliance change prior to the onset of the crack growth | |
| A. Neimitz |
| The anti-plane shear field for crack in infinite slab of a nonlinear damage material | |
| L. Tang |
| The branching angle of dynamic crack propagation | |
| M. Watanabe |
| The correlation between temperature, loading rate, and microstructure of polymer blends | |
| T. Vu-Khanh |
| The dynamic mechanical respondence of weldment with mechanical heterogeneity by split hopkinson pressure bar testing | |
| J. X. Zhang, S. L. Gong |
| The dynamic punch test in isotropic and composite materials | |
| C. Rubio-Gonzalez, J. J. Mason |
| The dynamics of multiple neck formation and fragmentation in high rate extension of ductile materials | |
| P. R. Guduru, L. B. Freund |
| The effect of cold expansion on fatigue resistance on fastener holes | |
| J. Vogwell, J. M. Minguez |
| The effect of constraint on the field of interface cracks between strength mismatched materials in elastic - perfectly plastic plane strain conditions | |
| K. Lowe, J. W. Hancock |
| The effect of processing on tensile strength and fracture behavior of CFRP smart composites with embedded shape memory alloy wires | |
| B. K. Jang, J.-H. Koo, Y. Xu, N. Toyama, H. Yoshida, Y. Akimune |
| The effect of residual stresses and strains on fatigue crack propagation: measurement and modelling | |
| D. Nowell, L .J. Fellows, D. A. Hills, Y. Xu |
| The effect of specimen thickness during fatigue | |
| F. A . eer, J. Zuidema, P. A. Houdijk |
| The effect of thickness and crack geometry on material fracture toughness of high-toughness pipeline steels | |
| H. Dong, W. Guo |
| The effect of thickness on the characterisation of crack tip opening angle for 2024-T351 aluminium alloy | |
| S. Mahmoud, K. Lease |
| The effects of diffusion on interfacial fracture of multilayer hybrid microcircuit films | |
| N. R. Moody, D. P. Adams, D. Medlin, A. Volinsky, N. Yang, W. W. Gerberich |
| The fatigue damage of construction materials | |
| S. Shamirzaev, S. Ganihanov, G. Shamirzaeva |
| The formulae of fatigue crack propagation in polymethyl methacrylate | |
| H. Wang, J. Yan, X. Zheng |
| The fracture of geopolymers | |
| J. F. Silva, C. Thaumaturgo |
| The fracture toughness properties of large upset resistance stainless steel welds | |
| M. J. Morgan, S. L. West, W. R. Kanne Jr, G. K. Chapman |
| The high temperature fatigue of a nickel-base superalloy: the influence of waveform variables | |
| D. M. Knowles, D. K. Skelton |
| The influence of dynamic testing on the J - R resistance curve behavior of medium density polyethylene | |
| J. T. Dutton, D. M. Shuter, W. Geary |
| The influence of lattice distortion region near the grain boundary on mechanical properties in nanocyrstalline materials | |
| X. Wang, J. Wang, J. Rifkin, D. Li |
| The influence of the in-plane constraint on the J resistance curves | |
| A. Neimitz, J. Galkiewicz, R. Molasy |
| The influence of thermal residual stresses and friction on fatigue crack growth in fibre-reinforced intermetallic matrix composites | |
| G. Rauchs, P. J. Withers, P.F. Thomason |
| The load carrying-ability of PMMA flexural specimens with blunt notches | |
| A. J. Heidweiller |
| The mechanical behaviour and fracture of thin wall iron under quasi-static and dynamic loading conditions | |
| K. K. Schrems, J. A. Hawk, O. N. Dogan |
| The mobility of non-planar dislocations ahead of a crack tip | |
| A. H. W. Ngan |
| The quasi-static fracture behavior of 7034 aluminum alloy reinforced with Sic particulates | |
| T. S. Srivatsan, M. Al Hajri |
| The relationship between the median/radial and lateral cracks of vickers indents in soda-lime-silica-glass | |
| B. R. Whittle, R. J. Hand |
| The role of constraint in mixed mode I and II ductile fracture | |
| T. Swankie, D. J. Smith |
| The role of deformation twins in a ductile to brittle transition and brittle fracture of ferritic steels | |
| T. Smida, J. Bosansky |
| The role of monazite in oxide ceramic matrix composites | |
| J. Davis, D. B. Marshall, P. E. D. Morgan |
| The role of particles in fatigue crack propagation of aluminium alloys | |
| Z. Z. Chen, K. Tokai, T. Horimoto |
| The simulations of the void initiation from the multiple seeds by molecular dynamics and the FEM | |
| T. Tsuji, N. Noda |
| The tunnel-crack with a slightly wavy front under shear loading | |
| V. Lazarus, J.-B. Leblond |
| The use of water-based epoxy resin coating for strengthening glass | |
| B. R. Whittle, R. J. Hand, B. Ellis |
| Thermal cycle fatigue behaviour on the dissimilar material joint | |
| Y. Fukuzawa, S. Nagasawa, S. Nishida, S. Hikotani |
| Thermal failure mechanism and threshold of SiC particula reinforced metal matrix composites | |
| Y. C. Zhou, S. G. Long, Z. P. Duan |
| Thermal failure of thermal barrier ceramic coating | |
| Y. C. Zhou, T. Hashida |
| Thermal fatigue dislocation structures in 316L steel: Experiments and simulations | |
| C. F. Robertson, M. C. Fivel |
| Thermal shock damage mechanism of fiber bonded ceramics | |
| J. Kogo |
| Thermal shock fracture behaviour of ceramics characterized by disc-on-rod tests | |
| S. Wakayama, K. Nishino, S. Arai |
| Thermal-elastic-plastic coupled analyses of dynamic crack growth | |
| F. Xu, W. Guo, Y. Y. Liu |
| Thickness dependence of ductile tearing in thin aluminium plates - experiments and modelling | |
| T. Pardoen, F. Hachez |
| Three-dimensional fatigue fracture in complex environments | |
| W. Guo |
| Three-dimensional mixed mode fracture on cement mortar | |
| K. Zhong, K. W. Lo, T. Tamilselvan |
| Time dependent stress intensity factors in a viscoelastic strip | |
| M. Takashi, S. Yoneyama |
| Toughening of nano-composite ceramics | |
| D.-N. Fang, X. Dong, A. Soh |
| Transition from ductile to cleavage fracture - effect of specimen size and mismatch | |
| E. Ostby, Z. L. Zhang, C. Thaulow |
| Ultimate analysis of ignalina NPP reinforced concrete containment subjected to internal pressure | |
| G. Dundulis, E. Uspuras |
| Ultra high temperature creep behavior for in-situ single crystal Al203/YAG oxide ceramic eutectic composites | |
| Y. Harada, T. Suzuki, K. Hirano |
| Unconventional domain bands near a crack tip | |
| W. Yang |
| Universal bridging laws for cracks in creeping media | |
| B. Cox, N. Sridhar |
| Use of atomic force microscopy in assessing surface damage due to fatigue | |
| L. Cretegny, A. Saxena |
| Use of surface-treatment life extension methods for aircraft components | |
| Q. Liu, S.A. Barter, P. Baburamani, P. K. Sharp, G. Clark |
| Validity requirement for the CNT small specimen testing procedure to evaluate fracture toughness | |
| J. W. H Price, A. Kotousov, B. Kerezsi |
| Verification of an experimental method to measure the stress-elongation law for an adhesive layer using a DCB-specimen | |
| U. Stigh, T. Andersson |
| Vibrations of a cross-ply ceramic matrix composite beam with matrix cracks in longitudinal and transverse layers | |
| V. Birman, L. W. Byrd |
| Vibrodiagnostics of Fatigue Cracks in Cylinder Shells | |
| A.B. Roytman, O.A. Titova |