| 5310 - PROBABILISTIC FATIGUE ANALYSIS FOR STRUCTURAL HEALTH MONITORING | |
| S. S. Kulkarni, Li Sun, B. Moran, S. Krishnaswamy, J. D. Achenbach |
General Papers
| 2956 - BEHAVIOUR OF HIGH-STRENGTH CONCRETE AT HIGH LOADING RATES | |
| Ortlepp S., Curbach M. |
| 2960 - MODE I INTERLAMINAR FRACTURE OF CARBON/EPOXY MULTIDIRECTIONAL LAMINATES | |
| Pereira A.B., De Morais A.B., De Moura M.F.S.F., Magalhaes A.G. |
| 3044 - MONITORING CORROSION RATE OF CONCRETE BY AC IMPEDANCE SPECTROSCOPY | |
| Ismail M., Ohtsu M. |
| 3045 - MICROMECHANICS OF CORROSION CRACKING IN REINFORCED CONCRETE BY AE | |
| Uddin F.A.K.M., Ohtsu M. |
| 3047 - NUMERICAL EXPERIMENT ON DETECTING VOIDS IN CONCRETE BY SIBIE | |
| Ata N., Ohtsu M. |
| 3080 - A COMPUTATIONAL TECHNIQUE FOR PREDICTING DELAMINATION GROWTH IN SOLIDS WITH VISCOELASTIC INTERFACES | |
| Allen D.H., Stefan Martin, Lutz Krüger, Wolfgang Kreuzer |
| 3106 - SIMPLIFIED CRACK INITIATION ANALYSIS OF PIEZOELECTRIC CERAMICS UNDER CYCLIC LOADING | |
| Mizuno M., Shimomura T. |
| 3127 - BRIDGING THE SCALES WITH STATISTICAL DAMAGE MECHANICS | |
| Krajcinovic D., Rinaldi A., Masahito Mochizuki |
| 3143 - COMPRESSIVE FRACTURE OF LAYERED HYPERELASTIC MATERIALS WITH INTER- AND INTRALAMINAR DEFECTS | |
| Guz I., Kashtalyan M., Herrmann K. |
| 3144 - FLAW TOLERANT BULK AND SURFACE NANOSTRUCTURES OF BIOLOGICAL SYSTEMS | |
| Gao H., Ji B., Buehler M.J., Yao H. |
| 3153 - CONSTRAINED DIFFUSIONAL CREEP IN ULTRA THIN COPPER FILMS DEPOSITED ON SUBSTRATES | |
| Buehler M.J., Hartmaier A., Gao H. |
| 3154 - HYPERELASTICIY IN DYNAMIC FRACTURE: THE CHARACTERISTIC ENERGY LENGTH SCALE | |
| Gao H., Buehler M.J., Abraham F.F. |
| 3160 - NUMERICAL THREE-DIMENSIONAL CRACK GROWTH SIMULATION FOR COMPONENTS WITH MULTIPLE CRACKS | |
| Fulland M., Richard H.A. |
| 3169 - CONTINUUM AND ATOMISTIC MODELING OF DYNAMIC FRACTURE AT NANOSCALE | |
| Buehler M.J., Abraham F.F., Gao H. |
| 3182 - THERMAL-MECHANICAL FATIGUE BEHAVIOUR OF MICROCAST-X INCONEL 718 | |
| Richards N.L., Zagula J., Chaturvedi M.C. |
| 3289 - QUANTITATIVE ASSESSMENT OF FATIGUE CRACK GROWTH PATH ON PROPAGATION CYCLE ESTIMATION | |
| Bowry M., Bowen P., Glover N., Rugg D. |
| 3328 - A MODIFICATION OF THE RANDOM MIDPOINT DISPLACEMENT METHOD FOR GENERATING ROCK FRACTURE SIMILAR SURFACES | |
| Gothäll R., Eriksson M., Stille H., Dan Mihai Constantinescu, Marcin Knec, Dragos-Alexandru Apostol |
| 3341 - THE INFLUENCE OF PRE-AGING, TEMPERATURE, MEAN AND LOCAL STRAIN ON LOW CYCLE AND THERMO-MECHANICAL FATIGUE | |
| Riedler M., Minichmayr R., Eichlseder W. |
| 3342 - MATRIX FATIGUE DAMAGE EVOLUTION IN A LONGITUDINAL CFRP COMPOSITE | |
| Plumtree A., Ostgathe M. |
| 3345 - EVALUATION OF CREEP BEHAVIOUR AND FATIGUE LIFE UNDER TMF-LOADING FOR ALLOY AlCuBiPb | |
| Minichmayr R., Riedler M., Eichlseder W. |
| 3390 - DAMAGE QUANTIFICATION FOR CONCRETE STRUCTURES BY IMPROVED b-VALUE ANALYSIS OF AE | |
| Shiotani T., Luo X., Haya H., Ohtsu M. |
| 3410 - STM/SEM METHOD FOR TESTING BENDING STRENGTH OF MEMS BEAMS | |
| Tuncay A., Shepherd C., Zalalutdinov M., Zehnder A.T., Craighead H. |
| 3433 - WARM PRE-STRESS EFFECTS ON CLEAVAGE FRACTURE IN CENTER CRACK SPECIMEN | |
| Ayatollahi M.R., Aliniaziazi A., Mostafavi M. |
| 3438 - MICROWAVE NDE OF A SMALL 3-D CRACK ON THE SURFACE OF STAINLESS STEEL | |
| Ju Y., Saka M., Uchimura Y. |
| 3440 - ON FATIGUE BEHAVIOR OF SMALL CRACKS INDUCED BY FOREIGN-OBJECT DAMAGE IN TI-6AL-4V | |
| Chapetti M.D. |
| 3458 - EFFECT OF ELEVATED TEMPERATURE ON THE MIXED MODE I/III FRACTURE TOUGHNESS OF ARMCO IRON | |
| Kamat S., Srinivas M., Rama Rao P. |
| 3460 - EFFECT OF NOTCH ROOT RADIUS ON MIXED MODE I/III FRACTURE TOUGHNESS OF MILD STEEL UNDER IMPACT CONDITIONS | |
| Srinivas M., Kamat S., Rama Rao P. |
| 3469 - FORMULATION OF A BONDED-PARTICLE MODEL TO SIMULATE STRESS CORROSION IN ROCK | |
| Potyondy D.O., Pavlo Maruschak, Pavel Lyubutin, Igor Konovalenko |
| 3486 - ANALYSIS OF DISCONTINUITIES IN FLUID-SATURATED MEDIA | |
| Abellan M.A., de Borst R., Bergheau J.M., J-C. Ménard |
| 3500 - DEFORMATION LIMITS OF POLYMER COATED METAL SHEETS | |
| Van Den Bosch M., Schreurs P., Geers M., Zhiliang Zhang |
| 3506 - EMBEDDED ATOM METHOD SIMULATIONS OF SINGLE CRYSTAL NICKEL DUCTILE FRACTURE | |
| Potirniche G., Horstemeyer M., Wagner G., Gullet P.M. |
| 3517 - CREEP DAMAGE MECHANISMS IN PARTICLE REINFORCED MAGNESIUM COMPOSITES | |
| Sklenicka V., Svoboda M., Pahutova M., Kucharova K. |
| 3522 - A MOTHER-DAUGHTER MECHANISM OF MODE I CRACKS: SUPERSONIC CRACK MOTION ALONG INTERFACES OF DISSIMILAR MATERIALS | |
| Buehler M.J., Gao H. |
| 3523 - NONLINEAR EFFECTS IN DYNAMIC FRACTURE | |
| Buehler M.J., Gao H., Abraham F.F. |
| 3525 - APPLICATION OF A STRIP-YIELD CRACK CLOSURE MODEL TO CRACK GROWTH PREDICTIONS FOR STRUCTURAL STEEL | |
| Skorupa M., Machniewicz T., Skorupa A., Beretta S. |
| 3539 - INFLUENCE OF SCANDIUM ON THE KINETICS OF FATIGUE CRACK GROWTH IN 7010 AL – ALLOY | |
| Desmukh M.N., Pandey R.K., Mukhopadhyay A.K. |
| 3583 - DYNAMIC FRACTURE TOUGHNESS DETERMINED USING MOLECULAR DYNAMICS | |
| Swadener J. G., Baskes M.I., Nastasi M. |
| 3589 - STOCHASTIC ANALYSES OF DYNAMIC FRACTURE IN COMPOSITE CERAMIC MICROSTRUCTURES | |
| Zhou M., Tomar V. |
| 3615 - INITIATION OF FAILURE IN A SINGLE LAP JOINT | |
| Braccini M., Dupeux M., Leguillon D. |
| 3630 - THE INFLUENCE OF BIAXIAL STRESS ON THE FATIGUE BEHAVIOR OF DEFECT-CONTAINING STEELS | |
| McEvily A.J., Endo M., Ishihara S. |
| 3644 - MICROSCOPIC OBSERVATION AND MODELING OF TOUGHENING MECHANISM IN RUBBER-MODIFIED POLYMER | |
| Todo M., Arakawa K. |
| 3699 - DERIVATION OF FILM CHRACTERISTIC CONSTANTS BY USING GOVERNING PARAMETER FOR ELECTROMIGRATION DAMAGE IN PASSIVATED BAMBOO LINE | |
| Hasegawa M., Sasagawa K., Saka M. |
| 3720 - DISLOCATION MODEL OF AN ASYMMETRIC WEAK ZONE FOR PROBLEMS OF INTERACTION BETWEEN CRACK-LIKE DEFECTS | |
| Simonov I.V., Karihaloo B.L., A.M. Podurets, Andru Malyshev |
| 3727 - MESOSCALE MODELING OF HYDROGEN ASSISTED CRACK GROWTH IN HETEROGENEOUS MATERIALS | |
| Pfuff M., Dietzel W. |
| 3739 - FERROELECTRIC SHIELDING OF AN ELONGATED CAVITY BY POLARIZATION ROTATION | |
| Kamlah M., Kessler H., Balke H. |
| 3758 - RESIDUAL STRESSES AND FATIGUE PERFORMANCE | |
| James M.N., Hughes D.J., Chen Z., Hattingh D.G., Webster P.J. |
| 3760 - DEVELOPMENTS IN DELAYED HYDRIDE CRACKING IN ZIRCONIUM ALLOYS | |
| Puls M.P. |
| 3811 - NUMERICAL AND EXPERIMENTAL INVESTIGATIONS ON FATIGUE CRACK GROWTH IN A WHEEL OF THE GERMAN HIGH-SPEED TRAIN ICE | |
| Richard H.A., Sander M., Fulland M., Kullmer G. |
| 3817 - ANALYSIS OF CHANGE MODE I STRESS INTENSITY FACTOR IN ELEMENTS WITH ANGULAR NOTCHES | |
| Tabanyukhova M.V., Kurbanov A. B., Pangaev V.V., W. Ecker |
| 3825 - INFLUENCE OF STRESS STATE AND TEMPERATURE ON THE STRENGTH OF EPOXY RESINS | |
| Fiedler B., Schulte K., Hobbiebrunken T., Hojo M. |
| 3890 - A GENERAL WEIGHT FUNCTION FOR A SUBSURFACE CRACK IN A TWO DIMENSIONAL HALF-SPACE | |
| Beghini M., Bertini L., Fontanari V. |
| 3901 - MODELISATION OF DELAYED FAILURE OF WOOD BEAMS | |
| Chaplain M., Valentin G. |
| 3907 - RECENT LIFE ASSESSMENT TECHNOLOGY FOR EXISTING STEAM TURBINES | |
| Saito K., Sakuma A., Fukuda M. |
| 3939 - ABOUT THE NECESSITY OF NEW TESTING PROCEDURES FOR MIXED MODE FRACTURE OF QUASIBRITTLE MATERILAS | |
| Gálvez J.C., Planas J., Elices M., Cendón D.A., Sancho J.M., Reyes E. |
| 3941 - METHOD FOR CHARACTERIZING THE FRACTURE SURFACE USING A TWO-DIMENSIONAL LOCAL HURST EXPONENT, AND ITS APPLICATION TO QUANTITATIVE EVALUATION OF STRETCHED ZONE WIDTH | |
| Yamagiwa K., Takanashi M., Izumi S., Sakai S. |
| 3982 - MULTISCALE MODELING AND SIMULATION OF CRACK PROPAGATION IN POLYCRYSTALLINE SOLIDS | |
| Chen Y., Oskard M.S., Lee J.D., Eskandarian A. |
| 4000 - FRACTURE OF PIEZOELECTRIC MEMS STRUCTURES | |
| Bahr D. F., Olson A.L., Kennedy M.S., Morasch K.R., Richards C.D., Richards R.F. |
| 4006 - INFLUENCE OF MICROSTRUCTURE ON DYNAMIC FRACTURES | |
| Marder M. |
| 4027 - COMPARISON OF DOUBLE AND SINGLE BONDED REPAIRS TO SYMMETRIC COMPOSITE STRUCTURES: A NUMERICAL ANALYSIS | |
| Bachir Bouiadjra B., Belhouari M., Serier B., Ouinas D. |
| 4029 - NUMERICAL ANALYSIS OF THE CRACK DEFLECTION AT CERAMIC - METAL INTERFACE | |
| Belhouari M., Serier B., Bachir Bouiadjra B., Boutabout B. |
| 4030 - STUDY THERMAL RESIDUAL STRESSES IN A BI-MATERIAL CERAMIC-METAL: CASE OF THE BOTH AG/AL2O3 AND PT/AL2O3. | |
| Boutabout B., Serier B., Bachir Bouiadjra B., Belhouari M., Haddouri K. |
| 4031 - DETERMINING AGGREGATE SIZE & SHAPE EFFECT ON CONCRETE MICROCRACKING UNDER COMPRESSION BY MEANS OF A DEGREE OF REVERSIBILITY METHOD | |
| Tokyay M., Akcaoglu T., Andrey Shanyavskiy, Aleksey Zhuravlev |
| 4043 - PRESSURE ASSESSMENT OF CRACK DEFECTS EMPLOYING ULTRASOUND IN-LINE INSPECTION | |
| Lamontagne M., Reber K., Uzelac N. |
| 4044 - CONTACT DAMAGE IN DENTAL MULTILAYERS: FROM EXPERIMENTS TO MECHANISM-BASED MODELS AND BIOINSPIRED DESIGN | |
| Soboyejo W., Huang M., Shrotriya P., Zhou J.K., Niu X., Thompson V. |
| 4049 - TRENDS IN STATIC AND DYNAMIC MIXED-MODE FRACTURE | |
| Manoharan M. |
| 4066 - MATERIAL CHARACTERISATION AT THE MICRO SCALE THROUGH ON-CHIP TESTS | |
| Cacchione F., De Masi B., Corigliano A., Ferrera M. |
| 4068 - COHESIVE ZONES FOR FATIGUE DAMAGE IN SOLDER JOINTS | |
| Erinç M., Schreurs P.J.G., Geers M.G.D., Elena Iriskina, Irina Goryacheva |
| 4072 - FATIGUE BEHAVIOR OF NICKEL-TITANIUM SUPERELASTIC WIRES AND ENDODONTIC INSTRUMENTS | |
| Bahia M.G.A., Buono V.T.L. |
| 4073 - A 3D ISOTROPIC MESOMECHANICAL MODEL OF DEFORMATION AND CUMULATIVE DAMAGE OF CONCRETE | |
| Kafka V., Vokoun D., S. Melin |
| 4074 - THE EFFECT OF CYCLIC BENDING STRAINS ON THE BEHAVIOR OF SUPERELASTIC NICKEL-TITANIUM WIRES AND ENDODONTIC INSTRUMENTS | |
| Bahia M.G.A., Dias R.F., V.T.L. Buono |
| 4087 - THREE DIMENSIONAL EFFECTS ALONG THE CRACK FRONT INFLUENCING THE VALIDITY CRITERIA FOR DETERMINING FRACTURE TOUGHNESSES | |
| Zúñiga D.F., Canteli A.F., Kalthoff J.F., Grasa J., Doblaré M. |
| 4095 - A REVIEW OF FINITE ELEMENT TECHNIQUES TO ANALYSE 3D PIEZOELECTIC CRACK PROBLEMS | |
| Kuna M. |
| 4110 - IDENTIFICATION OF MICROCRACKING PROCESS IN FRACTURE PROCESS ZONE BY AE | |
| Ohtsu M. |
| 4122 - A GENERAL FORMULATION OF THE POTENTIAL ENERGY RELEASE RATE FOR A THREE-DIMENSIONAL HYPERELASTIC BODY CONTAINING A PLANE CRACK | |
| Chiarelli M., Troiani E., Angelika Brueckner-Foit |
| 4128 - BRITTLE FRACTURE AND NEAR-SURFACE DAMAGES IN ELECTRONIC MATERIALS DURING THEIR MULTI-WIRE-SAWING AND LAPPING USING LOOSE ABRASIVE | |
| Britvin A.A., Litvinov M.Y. |
| 4151 - NDT FOR DETECTING VOIDS IN POST-TENSIONING TENDON DUCT BY SIBIE | |
| Watanabe T., Hashimoto C., Ohtsu M. |
| 4156 - OPERATIONAL WEAR AND FRICTION IN MEMS DEVICES | |
| Subhash G., Corwin A.D., De Boer M.P. |
| 4160 - A MICROSTRUCTURE DEGRADATION ASSESSMENT OF THE 9% Cr-1.8%W FERRITIC CREEP RESISTANT STEEL EXPOSED FOR 64,363 OR 115,395 HOURS IN PLANT TRIAL APPLICATION | |
| Muraki T., Hasegawa Y., Ohgami M. |
| 4171) FATIGUE BEHAVIOR OF WELDED JOINTS IN A FERRITIC STAINLESS STEEL SUS444 | |
| Nakajima M., Akita M., Tokaji K. |
| 4195 - ENGINEERING ASPECTS ON FATIGUE CRACK GROWTH UNDER COMPLEX LOADING | |
| Nilsson F., Olsson M., Alfredsson B. |
| 4196 - TENSILE FRACTURE BEHAVIOR AND CASTING DEFECTS OF BETA TYPE Ti-29Nb-13Ta-4.6Zr CAST BY DENTAL PRECISION CASTING PROCESSING | |
| Niinomi M., Akahori T., Manabe T., Takeuchi T., Katsura S. |
| 4204 - EXPERIMENTAL INVESTIGATION OF STRAIN, DAMAGE AND FAILURE OF HYDRIDED ZIRCONIUM ALLOYS WITH VARIOUS HYDRIDE ORIENTATIONS | |
| Racine A., Bornert M., Sainte Catherine C., Cappelaere C., Caldemaison D. |
| 4206 - FRACTURE STRENGTH OF THIN FILMS STUDIED BY INDENTATION TESTING | |
| Yonezu A., Ogawa T., Takemoto M. |
| 4210 - A HYBRID WEIGHT FUNCTION APPROACH FOR THE COMPUTATION OF STRESS INTENSITY FACTOR IN ELLIPTICAL AND SEMI-ELLIPTICAL CRACKS | |
| Hachi B.K., Rechak S., Belkacemi Y., Haboussi M. |
| 4214 - FRACTOGRAFIC STUDY OF CLEAVAGE CRACK ARREST | |
| Hajjaj M., Berdin C., Bompard P., Bugat S. |
| 4218 - MESHLESS ANALYSIS OF CRACK PROPAGATION IN MULTIPHASE MATERIAL | |
| Chen Y., Lee J.D., Oskard M.S., Eskandarian A., Reinhard Pippan |
| 4226 - A CRITICAL STATE TWO-SURFACE MICROPOLAR PLASTICITY MODEL FOR SANDS | |
| Manzari M., Dafalias Y., Giuseppe Lacidogna, Alessandro Schiavi, Alberto Carpinteri |
| 4239 - FRACTURE ASSESSMENT OF LASER BEAM WELDED ALUMINIUM PANELS | |
| Seib E., Koçak M., Assler H., Pacchione M. |
| 4258 - THE EFFECTS OF LATTICE ORIENTATION AND PROXIMITY TO A GRAIN BOUNDARY ON MICROSTRUCTURALLY SHORT CRACKS IN 316L STEEL | |
| Simonovski I., Nilsson K.-F., Kovac M., Cizelj L. |
| 4268 - APPLICATION OF IMPACT-ECHO TECHNIQUES FOR CRACK DETECTION AND CRACK PARAMETER ESTIMATION IN CONCRETE | |
| Grosse C.U., Reinhardt H.W., Krüger M., Beutel R. |
| 4269 - COMPUTER SIMULATION OF HYDROGEN-AFFECTED DISLOCATION MOVEMENT | |
| Yokogawa K., Wen M., Fukuyama S. |
| 4271 - REGULARIZED DAMAGE MODEL BASED ON NONLOCAL DISPLACEMENT FIELD | |
| Marfia S., Jirasek M., Mohsen Mohebbi |
| 4281 - MODELLING OF CRACK ARRESTORS ON GAS-PIPELINES | |
| Fonzo A., Salvini P., Mannucci G., Demofonti G., Di Biagio M., Edwards A. |
| 4290 - THERMODYNAMICAL ASPECTS OF IMPLICIT GRADIENT DAMAGE | |
| Peerlings R.H.J., Geers M.G.D., Panagiotis Chatzistergos, Christos Markides |
| 4297 - MATHEMATICAL MODELING OF TEMPERATURE AND RATE DEPENDENCES OF STRAIN HARDENING IN FCC METALS | |
| Kolupaeva S.N., Puspesheva S.N., Semenov M.E. |
| 4309 - ELECTRIC FRACTURE AND POLARIZATION SWITCHING OF PIEZOELECTRIC CERAMICS:EXPERIMENT AND FINITE ELEMENT SIMULATION | |
| Karaiwa M., Narita F., Shindo Y. |
| 4315 - FIRST-PRINCIPLES CALCULATIONS OF TENSILE STRENGTH OF COPPER-ALUMINA INTERFACES AND THE DEVELOPMENT OF INTERATOMIC POTENTIALS | |
| Kohyama M., Tanaka S., Yang R. |
| 4317 - EVALUATION OF FRACTURE TOUGHNESS BY EWF METHOD FOR THIN-WALL MOLDINGS | |
| Kenmochi S., Mizoguchi M., Kita H., Kuriyama T. |
| 4325 - MODELLING OF DUCTILE ANISOTROPIC CONTINUUM DAMAGE: EXPERIMENTS AND NUMERICAL ANALYSES | |
| Brünig M., Ludvík Kunz |
| 4335 - NUMERICAL APPROACH TO THE MECHANICS OF DISC BLADE DOVETAIL JOINTS IN AERO ENGINE COMPRESSORS | |
| Hammouda M.M.I., Fayed A. S. |
| 4337 - RESIDUAL STRESSES BEHAVIOR UNDER FATIGUE CRACK CYCLIC LOADING: A FINITE ELEMENT ANALYSES | |
| Gonçalves E., Gonzales M.A.C., Mauro Cavallini |
| 4342 - A PROBABILISTIC MODEL FOR THE FORMATION AND PROPAGATION OF CRACK NETWORKS IN HIGH CYCLE FATIGUE | |
| Seyedi M., Malésys N., K. Doli?ski |
| 4351 - DAMAGE OF CONCRETE IN CHEMICALLY AGGRESSIVE ENVIRONMENT: A MICROMECHANICAL MODEL | |
| Basista M., Weglewski W. |
| 4352 - DYNAMIC TRANSVERSE COMPRESSIVE FAILURE OF UNIDIRECTIONAL FIBER REINFORCED COMPOSITES | |
| Vural M., Kidd T.H., Ravichandran G. |
| 4361 - DYNAMIC CRACK PROPAGATION IN A HETEROGENEOUS MATERIAL STRIP: STUDY OF THE BROBERG PROBLEM BY CONTINUUM AND ATOMISTIC METHODS | |
| Gao H., Chen S., Buehler M., Yuying Yu |
| 4367 - EXPERIMENTAL INVESTIGATION ON COMPETITION BETWEEN WEAR AND RCF IN A RAIL STEEL | |
| Donzella G., Faccoli M., Mazzù A., Roberti R. |
| 4378 - PERFORMANCE OF CREEP CRACK GROWTH ON W STRENGTHENED 9-12Cr STEEL | |
| Kobayashi K.I., Shimizu S., Hirohashi M., Fuji A., Yokobori A.T. Jr |
| 4388 - FATIGUE CRACK PROPAGATION CHARACTERISTICS OF WELDED JOINTS IN A 444 STAINLESS STEEL | |
| Akita M., Tokaji K., Nakajima M., Shimizu T. |
| 4398 - INFLUENCE OF THE YIELD STRESS AND THE HARDENING OF THE MATERIAL ON THE FATIGUE CRACK GROWTH AFTER PEAK LOADS – A FINITE ELEMENT ANALYSIS | |
| Sander M., Richard H.A., Grond M. |
| 4402 - INFLUENCE OF THE MICROSTRUCTURE ON THE CRACK PROPAGATION: IN SITU INVESTIGATION IN THE SCANNING ELECTRON MICROSCOPE | |
| Marx M., Vehoff H. |
| 4412 - AN INTERACTION INTEGRAL METHOD FOR COMPUTATION OF T-STRESS ALONG THE FRONTS OF GENERAL NON-PLANAR CRACKS IN THREE-DIMENSIONS | |
| Gosz M. |
| 4422 - STRESS AND STRAIN FIELDS OF A CRACK-INCLUSION PAIR IN β-SiC: AN ATOMISTIC INVESTIGATION OF NONLINEARITY EFFECTS | |
| Mattoni A., Ippolito M., Colombo L., Cleri F. |
| 4423 - COMPUTATIONAL DYNAMIC FRACTURE ANALYSIS FOR DROP TESTS OF SHIPPING CASKS | |
| Enderlein M., Völzer W., Ricoeur A., Kuna M. |
| 4430 - PREDICTION OF CREEP CRACK INITIATION USING A DAMAGE – BASED APPROACH | |
| Davies C.M., Yatomi M., O’Dowd N.P., Nikbin K.M. |
| 4444 - CHARACTERIZATION OF FATIGUE CRACK INITIATION CONDITION OF STEELS WITH AFM | |
| Nakai Y., Kishimoto M., Hosomi S. |
| 4449 - AN ANALYTICAL AND EXPERIMENTAL STUDY TO ESTABLISH "CRITICAL FLAW SIZES" FOR HIGH PRESSURE SEAMLESS CYLINDERS | |
| Smith J.H., Rana M.D. |
| 4457 - INFLUENCE OF RESIDUAL STRESSES ON THE CRACK DRIVING FORCE IN BIMATERIALS WITH SHARP INTERFACE | |
| Rakin M., Kolednik O., Simha N.K. |
| 4464 - FRACTURE TESTING OF HYBRID-FIBRE CONCRETE | |
| Stähli P., J.G.M. Van Mier, Paul C. Paris, Nicolas Saintier |
| 4470 - THREE DIMENSIONAL CRACK DETECTION IN HARDENED CEMENT PASTES USING SYNCHROTRON-BASED COMPUTER MICROTOMOGRAPHY | |
| Trtik P., van Mier J.G.M., Stampanoni M. |
| 4472 - QUASI-BRITTLE FRACTURE OF FOAM-POLYSTYRENE PLATES WITH HOLE | |
| Legan M., Kolodezev V., Sheremet A. |
| 4499 - FAILURE MECHANISMS OF HENS’ EGGS | |
| Hancock J., MacLeod N., Bain M., Solomon S., Hancock J. |
| 4500 - ENVIRONMENTAL EFFECTS ON THE ADHESION OF GOLD MICROCIRCUIT FILMS | |
| Cordill M.J., Moody N.R., Adams D.P., Yang N., Bahr D.F., Gerberich W.W. |
| 4513 - FAILURE ANALYSIS OF A WIRE ROPE BELONGING TO THE TRACTION SYSTEM OF A CABLE CAR | |
| Pinto A.L., da Costa Viana C. S., Mendonça Brandão L.P., Savi M., Calas Lopes Pacheco P.M., Alberto Carpinteri |
| 4526 - CORRELATION BETWEEN MAP CRACKING AND DELAYED ETTRINGITE FORMATION IN FIELD SPECIMENS | |
| Amde A.M., Ceary M., Livingston R.A. |
| 4528 - NONLOCAL DAMAGE-PLASTICITY MODEL FOR FAILURE OF CONCRETE | |
| Grassl P., Jirasek M., Alexey Smolin, Sergey Astafurov |
| 4529 - APPLICATION OF A GRADIENT DUCTILE DAMAGE MODEL TO METAL FORMING PROCESSES INCLUDING CRACK PROPAGATION AND MESH ADAPTIVITY | |
| Mediavilla J., Peerlings R.H.J., Geers M.G.D, U. Kivisäkk |
| 4539 - WATER PERMEABILITY OF CRACKED CEMENTITIOUS COMPOSITES | |
| Lepech M., Li V.C. |
| 4546 - RISK ASSESSMENT OF LOW-TEMPERATURE CRACKING OF ASPHALT - AN EXPERIMENTAL STUDY | |
| Spiegl M., Wistuba M., Blab R., Lackner R. |
| 4547 - FAILURE OF EQUINE COMPACT BONE UNDER IMPACT LOADING | |
| Davy D., Shazly M., Kayacan R., Prakash V., Rimnac C. |
| 4548 - CHARACTERIZATION OF DISTRIBUTED DAMAGE IN CONCRETE USING ADVANCED IMPACT-ECHO METHOD | |
| Livingston R., Sutin A.M., McMorris N., Ceary M., Amde A.M. |
| 4550 - FRACTURE BEHAVIOUR OF MULTIPLE–BOLT ENGINEERED WOOD PRODUCT CONNECTIONS | |
| Snow M., Asiz A., Smith I. |
| 4553 - FRACTURE IN TWO DIMENSIONS : ACOUSTIC EMISSION STUDIES AND THEORETICAL LESSONS | |
| Alava M., Salminen L., Rosti J., Pulakka J. |
| 4579 - VALIDATION OF MASSIVELY PARALLEL SIMULATIONS OF DYNAMIC FRACTURE AND FRAGMENTATION OF BRITTLE SOLIDS | |
| Arias I., Knap J., Chalivendra V.B., Hong S., Ortiz M., Rosakis A.J. |
| 4587 - IN-SITU STRENGTH OF ALUMINA GREEN COMPACT AT ELEVATED TEMPERATURE DURING SINTERING | |
| Nambu S., Enoki M., Takahashi F. |
| 4596 - EFFECT OF SURFACE ROUGHNESS OF SUBSTRATE ON FATIGUE STRENGTH OF THERMALLY SPRAYED STEEL WITH SELF-FLUXING ALLOY | |
| Akebono H., Komotori J., Shimizu M., Fukumoto M. |
| 4599 - FATIGUE PROPERTIES OF TITANIUM ALLOY, STAINLESS STEEL AND ALUMINUM ALLOY TREATED WITH FINE PARTICLE BOMBARDMENT | |
| Kameyama Y., Akebono H., Komotori J., Shimizu M. |
| 4602 - DYNAMIC RESPONSE AND FAILURE OF CELLULAR NETWORKS | |
| Vural M. |
| 4617 - GROWTH OF CRACKS BRIDGED BY NANOFIBERS | |
| Perelmuter M. |
| 4620 - PHYSICAL MEANING OF THE FICTITIOUS CRACK OPENING DISPLACEMENT IN DUGDALE MODEL | |
| Toyosada M., Gotoh K., Shigeru Hamada, Hiroshi Noguchi |
| 4630 - FITNESS FOR PURPOSE ASSESSMENT OF A STRUCTURAL ALUMINIUM RAILWAY CAR BODY COMPONENT | |
| Luke M., Blauel J.G., Schendera C. |
| 4631 - ON-PROCESS MONITORING OF CERAMICS AND CERAMIC COATINGS BY LASER AE | |
| Enoki M., Nishinoiri S. |
| 4661 - DURABILITY OF HYBRID FIBER METAL COMPOSITE LAMINATES | |
| Spearing M., Burianek D.A., Shim D.-J. |
| 4675 - NANOMACHINING FOR HIGH-RESOLUTION SCANNING OF MAMMALIAN BRAIN MICRO STRUCTURE | |
| Wiercigroch M., McCormick B.H., Mayerich D.M. |
| 4698 - INVESTIGATION ON CYCLIC DEFORMATION BEHAVIOUR OF REINFORCED STEEL BARS | |
| Baydogan M., Uysal A., Kayali E.S., Cimenoglu H. |
| 4704 - PROCEDURE OF STATISTICAL SIZE EFFECT PREDICTION FOR CRACK INITIATION PROBLEMS | |
| Vorechovsky M., Bazant Z.P., Novak D. |
| 4716 - SHEAR LOCALIZATION AND PERCOLATION OF STABLE STRUCTURE IN AMORPHOUS SOLIDS | |
| Falk M., Shi Y. |
| 4710 - A DISCRETE FRACTURE APPROACH FOR DIFFUSION/COUPLED ANALYSIS WITH CRACKS AND DISCONTINUITIES | |
| Segura J.M., Carol I., Samual McDonald, Paul Mummery |
| 4714 - FRACTURE OF RUBBER-TOUGHENED POLY: MEASUREMENT AND STUDY OF COHESIVE ZONE PARAMETERS | |
| Andena L., Rink M. |
| 4715 - SIMULATIONS OF NANOINDENTATION IN A NON-CRYSTALLINE METAL FILM | |
| Shi Y., Falk M.L. |
| 4733 - THE EFFECT OF WARM SHOT PEENING ON THE FATIGUE PERFORMANCE OF A SAE 5160 SPRING STEEL | |
| Ruy M.C., Tarpani J.R., Milan M.T., Spinelli D., Bose W.W. |
| 4751 - INTERFACE FRACTURE TOUGHNESS OF TBCS AT HIGH TEMPERATURE | |
| Wu D., Zhou Y.C., Alexey Mezrin, Boris Sachek, Vyacheslav Sakharov, Nikolay Frolov |
| 4778 - ON THE INVESTIGATION OF MATERIAL STABILITY DURING THE SIMULATION OF DUCTILE DAMAGE IN METALLIC MATERIALS | |
| Reusch F., Svendsen B., K.A. Martynyak, Kostyantyn Chumak |
| 4808 - FRACTURE MECHANICS ANALYSIS OF NOTCH FATIGUE OF A SINGLE CRYSTAL SUPERALLOY—CMSX-4 | |
| Wu X., Miller M., Zhang Z., J. Miller, Reed P.A.S. |
| 4811 - STRENGTH DISTRIBUTIONS OF SINTERED HYDROXYAPATITE NANOPARTICLES | |
| Shaw M.T., Wei M., Chandrasekhar K.R. |
| 4823 - SIMULATION OF CREEP CRACK GROWTH OF A DIRECTIONALLY-SOLIDIFIED NI-BASE SUPERALLOY | |
| Gordon A.P., Shenoy M.M., McDowell D.L. |
| 4824 - ANOMOLOUS FATIGUE CRACK GROWTH PHENOMENA IN HIGH-STRENGTH STEEL | |
| Forth S.C., James M.A., Johnston W.M., Newman J.C. Jr. |
| 4825 - STOCHASTIC MODEL OF MULTIPLE CRACKING PROCESS IN FIBER REINFORCED CEMENTITIOUS COMPOSITES | |
| Kabele P., Stemberk M., Kyung Sik Kim, Ju Ho Choi |
| 4831 - ON THREE-DIMENSIONAL VIRTUAL CRACK CLOSURE-INTEGRAL METHOD FOR ARBITRARY SHAPED HEXAHEDRON FINITE ELEMENTS | |
| Okada H., Higashi M., Kikuchi M., Fukui Y., Kumazawa N. |
| 4862 - ON THE PRESENCE OF T-STRESS IN MODE II CRACK PROBLEMS | |
| Ayatollahi M.R., Zakeri M., Hassani M.M. |
| 4864 - A MULTI-SCALE METHOD FOR MASONRY COMPUTATIONS | |
| Massart T.J., Peerlings R.H.J, Geers M.G.D. |
| 4865 - CREEP-DAMAGE INTERACTION IN CONCRETE STRUCTURES | |
| Pijaudier-Cabot G., Omar M., Loukili A., Le Pape Y. |
| 4913 - A ONE-DIMENSIONAL INTRODUCTION TO CHEMICAL STRAINS AND STRESSES WITH APPLICATIONS TO DIFFUSION IN CRACKED SOLIDS | |
| Wu C.H., Liu P., Camille Robert, Thierry Palin-Luc, Franck Morel |
| 4922 - FRACTURE BEHAVIOR OF TYRANNO-ZMI FIBER EXPOSED IN AIR AT 1173~1673K | |
| Morishita K., Hojo M., Okuda H., Ochiai S., Sato M. |
| 4936 - EFFECT OF SIZE OF COATING DEFECT ON FATIGUE PROPERTIES OF STEEL THERMALLY SPRAYED WITH NI-BASED SELF-FLUXING ALLOY | |
| Nishimori H., Akebono H., Komotori J., Shimizu M. |
| 4942 - A MICROSCOPIC APPROACH TO RATE EFFECT ON CONCRETE STRENGTH UNDER COMBINED LOAD | |
| Dan Z., Qingbin L., Katsuo Seki, Kiyoaki Shimizu, Shogo Watanabe, Saburo Matsuoka |
| 4947 - COMPARISON OF TWO CREEP CRACK GROWTH PARAMETERS, C* AND Q*, WITH F.E. ANALYSIS | |
| Yatomi M., Nikbin K.M., Yokobori A.T. Jr. |
| 4948 - QUANTITATIVE MEASUREMENT OF STRETCHED ZONE WIDTH BASED ON DIFFERENCES IN FRACTURE SURFACE ROUGHNESS | |
| Takanashi M., Yamagiwa K., Izumi S., Sakai S. |
| 4952 - CREEP CRACK GROWTH PROPERTIES OF WELDED JOINTS FOR HIGH CR FERRITIC STEEL | |
| Tabuchi M., Ha J., Yokobori T.A. Jr. |
| 4956 - FAILURE ANALYSIS OF THE SUSPENSION SPRING OF A LIGHT DUTY TRUCK | |
| Eryürek B., Ereke M., Göksenli A., Jordi Romeu |
| 4966 - FATIGUE DAMAGE OF SHAFT WITH THE COLLAR FORMED BY A NEW DEFORMATION PROCESSING METHOD FOR ENLARGING PARTIAL DIAMETER | |
| Zhu X., Okabe N., Tsutsumi M., Mori K., Iura T. |
| 4971 - PLASTIC INSTABILITY ANALYSIS OF THIN-WALLED TUBE UNDER TENSION-PRESSURE COMBINED LOADING | |
| Tadano Y., Noguchi H., Kuroda M. |
| 4980 - COMPARATIVE STUDY OF DEFORMATION AND FAILURE BEHAVIOR OF CONVENTIONAL AND NANOCRYSTALLINE MAGNESIUM ALLOYS | |
| Yan C., Ye L., Mai Y.-W., Lu L., Lai M.O. |
| 4988 - INFLUENCE OF THE INTERMEDIATE MATERIAL ON THE SINGULAR STRESS FIELD IN TRI-MATERIAL JUNCTIONS | |
| Carpinteri A., Paggi M. |
| 4991 - THEORETICAL AND NUMERICAL INVESTIGATION ON INTERNAL INSTABILITY PHENOMENA IN COMPOSITE MATERIALS | |
| Carpinteri A., Paggi M., Zavarise G. |
| 5002 - FRACTURE IN MULTIPHASE PARTICULATE MATERIALS: LATTICE MODELING ISSUES | |
| Bolander J.E., Yip M. |
| 5005 - SERVICE PROBLEMS OF FRESH AIR FAN OF FOSSIL FUEL POWER PLANT - PART I CASE STUDY OF PRIMARY STAGE AIR FAN FAILURE | |
| Sijacki Zeravcic V., Bakic G., Djukic M., Andjelic B. |
| 5007 - DESTABILIZATION OF RETAINED AUSTENITE DURING MULTIPLE TEMPERING OF HIGH-SPEED W-Mo-V STEEL | |
| Andjelic B., Sijacki Zeravcic V., Djukic M., Bakic G. |
| 5010 - MODEL FOR TIME-TO-FRACTURE DETERMINATION OF LOW-ALLOYED STEEL UNDER CREEP CONDITIONS | |
| Bakic G., Sijacki Zeravcic V., Djukic M., Milanovic D., Andjelic B. |
| 5012 - MODEL OF INFLUENCING FACTORS FOR HYDROGEN DAMAGES OF BOILER EVAPORATOR TUBES | |
| Djukic M., Sijacki Zeravcic V., Bakic G., Milanovic D., Andjelic B. |
| 5013 - RELATIONSHIP BETWEEN VICKERS HARDNESS AND FATIGUE STRENGTH | |
| Hirano A., Sakane M., Hamada N. |
| 5014 - CREEP AND CREEP-FATIGUE STANDARD TESTING FOR SOLDERS - JSMS RECOMMENDATION – | |
| Sakane M., Nose H., Takahashi H., Kitano M., Tsukada Y., A.S. Frolov |
| 5026 - MATERIAL AND STRUCTURAL BEHAVIOUR OF MIG BUTT WELDS IN 6000 SERIES ALUMINIUM ALLOY EXTRUSIONS FOR RAIL VEHICLES | |
| Xu W., Gittos M.F. |
| 5029 - THE EFFECT OF MULTI-AXIAL STRESS COMPONENT ON CREEP CRACK GROWTH RATE CONCERNING STRUCTURAL BRITTLENESS | |
| Yokobori A.T. Jr., Sugiura R., Tabuchi M., Fuji A., Adachi T., Yokobori T. |
| 5048 - ATOMISTIC SIMULATIONS ON FRACTURE EVENTS IN NANOSTRUCTURED SILICON CARBIDE | |
| Colombo L., Mattoni A., Ippolito M., Cleri F. |
| 5049 - THE EFFECT OF GLASS COMPOSITION ON CREEP DAMAGE DEVELOPMENT IN SILICON NITRIDE CERAMICS | |
| Lofaj F., Wiederhorn S.M., Dorcakova F., Hoffmann M. J. |
| 5053 - INVESTIGATION OF THE DAMAGE BEHAVIOUR OF NOVEL BIAXIAL REINFORCED WEFT KNITTED COMPOSITES | |
| Hufenbach W., Böhm R., Langkamp A., Kroll L., Gude M. |
| 5068 - ADVANCES IN CRACK ASSESSMENT FOR PIPELINE INTEGRITY | |
| Katz D., Gao M., Limon S., Krishnamurthy R. |
| 5073 - EXTRACTING MECHANICAL PROPERTIES USING REVERSE ANALYSIS OF SINGLE AND DUAL SHARP INDENTATION | |
| Dao M., Chollacoop N., Suresh S. |
| 5079 - LINKING MICROSTRUCTURE AND HIGH TEMPERATURE DUCTILITY IN ALUMINIUM ALLOYS 6XXX | |
| Lassance D., Schmitz M., Delannay F., Pardoen T. |
| 5097 - FATIGUE CARCK TIP DAMAGE-BASED MODELS IN STRUCTURAL PROGNOSIS | |
| Agnew S.R., Ro Y.J., Begley M.R., Gangloff R.P. |
| 5126 - A NUMERICAL MODEL FOR MULTI-LEAF MASONRY | |
| Ramalho M.A., Papa E., Taliercio A., Binda L. |
| 5147 - LOCAL COMPLIANCE EXPERIMENTS AND CRACK CLOSURE MODELS | |
| Carboni M. |
| 5183 - CORROSION RESISTANCE OF TI-6AL-4V ALLOY FINISHED BY AN ADVANCED ELID GRINDING SYSTEM | |
| Mizutani M., Komotori J., Katahira K., Ohmori H. |
| 5199 - EFFECTS OF MICROSTRUCTURE ON FRACTURE TOUGHNESS IN A533B SUBMERGED ARC WELDS | |
| Farron V.J., do Patrocinio A., Novovic M., Bowen P. |
| 5207 - APPLICATION OF CTOA/CTOD IN THE RESIDUAL STRENGTH ANALYSIS OF BUILT-UP AND INTEGRAL STRUCTURES | |
| Seshadri B.R., Forth S.C., Johnston W.M. Jr., Domack M.S. |
| 5209 - SIMPLE EVALUATION OF ELASTICITY IN NANO-METER SCALE USING A FLAT-ENDED SENSOR TIP IN SENSITIVITY-ENHANCED ATOMIC FORCE ACOUSTIC MICROSCOPY | |
| Muraoka M., Komatsu S. |
| 5224 - INTERACTION OF DYNAMIC CRACKS WITH INCLINED INTERFACES | |
| Chalivendra V.B., Hong S., Rosakis A.J., Arias I., Knap J., Ortiz M. |
| 5240 - HIGH TEMPERATURE FRACTURE TOUGHNESS INITIATION IN GAMMA MET PX | |
| Shazly M., Prakash V. |
| 5245 - INFLUENCE OF HEATS, HEAT-TREATMENTS AND TESTING METHODS ON HIGH TEMPERATURE FATIGUE OF 2.25Cr-1Mo STEELS | |
| Hayakawa M., Yamaguchi K., Kimura M., Kobayashi K. |
| 5270 - EFFECTS OF ELECTROPLATED ZINC-NICKEL ALLOY COATINGS ON THE FATIGUE STRENGTH OF AISI 4340 HIGH STRENGTH STEEL | |
| Voorwald H.J.C., Miguel I.M., Costa M.Y.P. |
| 5276 - APPLICATION OF THE MASTER CURVE METHODOLOGY TO FRACTURE TOUGHNESS CHARACTERIZATION OF FERRITIC-MARTENSITIC STEEL | |
| Sokolov M.A., Tanigawa H. |
| 5288 - INVERSE DISCONTINUITY FORMULATION OF FRACTURE | |
| Fagerström M., Larsson R. |
| 5293 - A VARIATIONAL APPROACH TO STRESS-INDUCED INSTABILITIES IN HETEROEPITAXIAL GROWTH | |
| Bonnetier E., Brassel M., Chambolle A., Jouve F. |
| 5313 - A THERMOMECHANICAL FATIGUE CRACK INITIATION MODEL FOR DIRECTIONALLY-SOLIDIFIED NI-BASE SUPERALLOYS | |
| Gordon A.P., Shenoy M., Neu R.W. |
| 5322 - APPLICATION OF DISCRETE STOCHASTIC FRACTURE NETWORKS FOR MODELLING OF GROUNDWATER FLOW | |
| Severin O., Maryska J., Vohralík M. |
| 5338 - BEHAVIO OF MASS CONCRETE USING SMEARED CRACK APPROACH IN THREE DIMENSIONAL PROBLEMS | |
| Mirzabozorg H., Ghaemian M., Sergey Psakhie |
| 5350 - AN ELASTOPLASTIC SHEAR-FRACTURE MODEL FOR SOIL AND SOFT ROCK | |
| Lo K.W., Nikraz H., Tamilselvan T., Zhao M.M. |
| 5351 - DETERMINATION OF CONSTITUTIVE PARAMETERS FOR SELF-SIMILAR INDENTATION CREEP AND ITS APPLICATIONS | |
| Takagi H., Fujiwara M., Dao M. |
| 5382 - MULTIPLE DELAMINATION OF LAMINATED STRUCTURES | |
| Andrews M., Massabo R., Cox B., Václav Veselý, Petr Frantík, Zbyn?k Keršner |
| 5396 - NUMERICAL APPROACH AND EXPERIMENTAL VALIDATION OF COMPOSITE SOUNDPROOFING PANELS FOR AERONAUTICAL APPLICATIONS | |
| Leofanti G., Marchetti M., Pulvirenti G., Vocca D. |
| 5400 - STUDY OF ADVANCED COMPOSITE STRUCTURES FOR HIGH TEMPERATURE APPLICATIONS | |
| Marchetti M., Amantini L., Bellachioma M., Cavallo G., Corradi S. |
| 5418 - EQUIVALENT MATERIAL MODELING FOR COMPOSITE OF DAMAGED INCLUSIONS WITH SPRING LAYER | |
| Nakagaki M., Matsumoto R., Nakamachi Y., Jan Scholten |
| 5420 - EXPERIMENTAL DETERMINATION OF K1, K2, K3 OF INTERNAL CRACKS UNDER ROLLING CONTACT LOADING | |
| Vergani L., Guagliano M., Sangirardi M. |
| 5434 - A NUMERICAL APPROACH TO THE FATIGUE CRACK GROWTH THRESHOLD | |
| Michel S.A., Kieselbach R., Figliolino M. |
| 5435 - COMPARISON BETWEEN DYNAMIC CRACK EQUATION AND SOME OF THE PUBLISHED EXPERIMENTS | |
| Watanabe M., Oomoto M. |
| 5450 - PRELIMINARY INVESTIGATION BY SYNCHROTRON RADIATION OF CRACKS AND DEFECTS IN AA FSW SAMPLES | |
| Cosmi F., Cristofori A., Mancini L., Tovo R., Tromba G., Volpone M. |
| 5452 - BRANCHING INSTABILITY OF BRITTLE FRACTURE | |
| Adda-Bedia M. |
| 5454 - DEVELOPMENT OF ACCEPTANCE/REJECTION CRITERIA FOR REQUALIFICATION OF HIGH PRESSURE GAS CYLINDERS | |
| Rana M.D., Smith J.H. |
| 5463 - FATIGUE FRACTURE OF POLY BONE CEMENT CONTAINING RADIOPACIFIER NANOPARTICLES | |
| Bellare A., Turell M.E., Gomoll A., Thornhill T.S. |
| 5473 - ON A BIMODAL REPRESENTATION OF SMALL FATIGUE CRACK SCATTER | |
| Carlson R.L., Cappelli M.D., Kardomateas G. |
| 5477 - THE FRACTURE PROBLEM IN THE FRAMEWORK OF GENERALIZED STATISTICAL MECHANICS | |
| Miraldi E., Kaniadakis G., Scarfone A.M., Cravero M., Iabichino G. |
| 5482 - CORRELATIONS OF STRESS DISTRIBUTIONS ALONG THE FAULT: FROM LABORATORY FRACTURE ROUGHNESS TO FAULT ASPERITY SQUEEZE | |
| Schmittbuhl J., Chambon G., Hansen A., Bouchon M. |
| 5494 - EFFECT OF THE ANISOTROPY ON THE CRACK BIFURCATION ANGLE | |
| Lahna F., Chahir Idrissi M. |
| 5501 - A MICROMECHANICS APPROACH TO QUANTIFY STRENGTH MISMATCH EFFECTS ON FRACTURE BEHAVIOR OF INTERFACE CRACKS | |
| Ruggieri C., Boris Margolin, Alexander Gulenko |
| 5505 - HYDROGEN DAMAGE IN THE CRACK TIP ENVIRONMENT | |
| Begley M.R., Agnew S.R., Komaragiri U., Gangloff R.P. |
| 5507 - DAMAGE AND MACROSCOPIC VANISHING MOTIONS | |
| Bonetti E., Fremond M., Katsuhiko Kaneko, Katsuya Sasaki, Ryo Sakamoto |
| 5508 - A MIXED APPROACH TO COHESIVE CRACK PROPAGATION | |
| Cinquini C., Bruggi M., Venini P., V. Kharin |
| 5516 - LONG-TERM DAMAGE ON MASONRY TOWERS CASE STUDIES AND INTERVENTION STRATEGIES | |
| Valluzzi M.R., Casarin F., Garbin E., da Porto F., Modena C. |
| 5519 - INFLUENCE OF TEMPERED MARTENSITE CONTENT ON THE FATIGUE CRACK PROPAGATION IN A STRUCTURAL STEEL | |
| Carneiro M.A., Pereira M.V., Darwish F.A., Motta S.H. |
| 5522 - FRACTURE MECHANISMS AND DUCTILITY AT HIGH TEMPERATURES OF A CARBON STEEL | |
| Calvo J., Cabrera J. M., Prado J. M. |
| 5527 - APPLICATION OF POTENTIAL DROP TECHNIQUE TO THE INSPECTION OF WELDED BOILER HIGH TEMPERATURE AND PRESSURE PARTS | |
| Kuroiwa T., Hamada S., Ogawa Y., Iida H., Kuroki M., Hayakawa M. |
| 5542 - MULTI-SCALE MODELING OF DEFORMATION IN POLYCRYSTALLINE THIN METAL FILMS | |
| Hartmaier A., Buehler M.J., Gao H. |
| 5554 - STRESS CORROSION CRACKING: A CANADIAN PROSPECTIVE FOR OIL AND GAS PIPELINE | |
| Elboujdaini M., Shehata M.T., Dmitry Kuranakov, Vasily Lapin, Sergey Cherny, Denis Esipov |
| 5558 - STATIC VS CYCLIC WORK HARDENING BEHAVIOUR OF GAS ATOMIZED TiAl ALLOY POWDER COMPACTS | |
| Berteaux O., Thomas M., Jouiad M., Henaff G. |
| 5561 - DYNAMIC FRACTURE OF NONLINEAR SOLIDS WITH MULTI-PARTICLE MODELING | |
| Marder M. |
| 5563 - METAL FORMING PROCESSES IMPROVEMENT BY CONTINUUM DAMAGE MECHANICS | |
| Saanouni K., Sergey Panin, Elena Iriskina, Pavel Maksimov, Stanislav Kupriyanov, Irina Goryacheva |
| 5564 - POLYCRYSTALLINE MICROSTRUCTURE, AND SCATTER IN THE NUMBER OF CYCLES TO INITIATION OF A HIGH-CYCLE FATIGUE CRACK | |
| Sauzay M., Jourdan T. |
| 5571 - DETERMINATION OF DYNAMIC FRACTURE TOUGHNESS FOR BRITTLE MATERIALS WITH A MODIFIED SHPB | |
| Weerasooriya T., Moy P., Casem D., Cheng M., Chen W. |
| 5578 - FRACTURE ANALYSIS OF COMPOSITE LAMINATE WITH DELAMINATION USING X-FEM | |
| Nagashima T., Suemasu H., Saburo Matsuoka, Yukitaka Murakami |
| 5581 - COMPARATIVE THEORETICAL-EXPERIMENTAL EVALUATION OF CONROD LITTLE-EYE STRESS ANALYSIS | |
| Cascella M.T., Rossi M., Cassani S., Costa A. |
| 5582 - THREE-DIMENSIONAL CRACK GROWTH SIMULATION:COMPUTATIONAL ASPECTS AND ANALYSIS OF CRACK TUNNELING TO QUANTIFY COD AS A FUNCTION OF CONSTRAINT | |
| Sutton M.A., Deng X., Zuo J. |
| 5588 - ESTIMATION OF STRENGHT FOR THREE-DIMENSIONAL BONDED STRUCTURES CONSIDERING STRESS SINGULARITY | |
| Koguchi H., Satoh M., Roberto Oliveira |
| 5590 - FRACTURE TOUGHNESS OF PLASTIC-MOLD STEELS:DEPENDENCE UPON HEAT TREATMENT AND MICROSTRUCTURE | |
| Firrao D., Matteis P., Vassallo M. |
| 5606 - FATIGUE CRACK GROWTH BEHAVIOR OF NITRIDED AND SHOT PEENED SPECIMENS | |
| Guagliano M., Vergani L. |
| 5614 - FATIGUE DAMAGE ACCUMULATION IN UNIDIRECTIONAL COMPOSITE UNDER APPLIED CYCLING TENSION LOAD | |
| Megnis M., Krasnikovs A. |
| 5618 - THE USE OF CONTROLLED SHOT PEENING TO IMPROVE THE FRETTING FATIGUE BEHAVIOUR OF FLAT ON FLAT ALUMINIUM CONTACT | |
| Pantelakis S., Rodopoulos A., Brown M.W., Gardiner S., Edwards R. |
| 5627 - THERMAL LAP SHEAR TESTS ON MEMS INTERCONNECTED SOLDER | |
| Vogel J., Faust W., Dudek R., Michel B., Dost M. |
| 5630 - CYCLIC BEHAVIOR OF FRP-WRAPPED COLUMNS UNDER AXIAL AND FLEXURAL LOADINGS | |
| Ferracuti B., Savoia M. |
| 5631 - FRP – CONCRETE DELAMINATION RESULTS ADOPTING DIFFERENT EXPERIMENTAL PURE SHEAR SETUPS | |
| Mazzotti C., Savoia M., Ferracuti B. |
| 5649 - EVOLUTION OF DAMAGE ACCUMULATION IN LOW-CARBON STEEL IN TENSION CONDITION | |
| Tyutin M.R., Botvina L.R., Zharkova N.A., Petersen T.B., Hudson J.A. |
| 5650 - THE INFLUENCE OF THE TRIAXIALITY IN THE STABLE CRACK GROWTH MODELLING USING GTN MODEL | |
| Vlcek L., Kozák V., Franck Morel, Nicolas Saintier, Thierry Palin-Luc |
| 5652 - PHASE ANGLE IN INDENTATION-INDUCED DELAMINATION WITH BUCKLING AND ITS APPLICATION TO INDENTATION DELAMINATION IN ZnO FILM/SI SUBSTRATE SYSTEMS | |
| Zhang T.-Y., Zhao M.-H., Huang B., Zhang T.-Y. |
| 5681 - FRACTURE OF RUBBERS UNDER MIXED MODE CONDITIONS | |
| Abdelaziz M.N., Hocine N.A., Bechet F. |
| 5682 - LOW CYCLE FATIGUE BEHAVIOUR OF RAILWAY WHEEL STEELS INCLUDING TEMPERATURE EFFECTS | |
| Ahlström J., Karlsson B., Mirsch M. |
| 5683 - EXPLORING THE ROLE OF SUPERABUNDANT VACANCIES ON H RELATED FRACTURE: BULK SIMULATIONS | |
| Tanguy D., Delafosse D., Mareschal M. |
| 5689 - DYNAMIC STRAIN AGEING EFFECTS IN AN EXTRUDED AA 7030 ALLOY SUBJECTED TO TENSILE DEFORMATION | |
| Karlsson B., Hörnqvist M. |
| 5691 - SIGNIFICANCE OF DWT TESTING FOR LINE PIPE SAFETY | |
| Erdelen-Peppler M., Gehrmann R., Junker G., Knauf G., Liessem A. |
| 5693 - IN SITU TEM MONITORING OF DISLOCATION MECHANISMS IN THIN METALLIC FILMS | |
| Legros M., Dehm G., Arzt E. |
| 5694 - FATIGUE CRACK GROWTH IN STRUCTURAL ALLOY AS PREDICTED BY THE STRAIN ENERGY DENSITY THEORY | |
| Nobile L., Carloni C., Nobile M. |
| 5699 - FRACTURE CHARACTERISTICS OF AGGREGATES SUBMITTED TO ALKALI SILICA REACTIONS | |
| BenHaha M., Guidoum A., Scrivener K. |
| 5707 - CRACK PREDICTION IN MASONRY STRUCTURES | |
| Paradiso M., Tempesta G. |
| 5713 - IN SITU MECHANICAL CHARACTERISATION OF DAM CONCRETE AND STRESS STATE BY DILATOMETRIC MEASUREMENTS AND INVERSE ANALYSIS | |
| Maier G., Lettieri M.A., Piola L., I Ozsoy, Y Kahraman |
| 5714 - EFFECTIVE PROPERTIES OF SOLIDS WITH STRESS CORROSION CRACKS | |
| Touzet M., Aubert I., Le Poulain F., Puiggali M. |
| 5718 - FINE DESCRIPTION OF FRACTURE BY USING DISCRETE PARTICLE MODEL | |
| Delaplace A., Ch. Motz, Reinhard Pippan, Ch. Guster |
| 5738 - HYDROGEN DECREASED DUCTILITY OF A U-6%NB ALLOY | |
| Teter D.F., Hackenberg R.E., Mauro M.E., Dickerson P.O., McCabe R. |
| 5740 - EXPERIMENTAL DETERMINATION OF THE CRITICAL CRACK TIP OPENING ANGLE USING THE CTOD d5 MEASUREMENT TECHNIQUE | |
| Heerens J., Schödel M., Schwalbe K.-H. |
| 5746 - NUMERICAL METHOD FOR ANALYZING INTERACTION AND COALESCENCE OF NUMEROUS MICROCRACKS | |
| Feng X.-Q., Lin Ma, Yu S.-W. |
| 5753 - CRACK GROWTH CHARACTERISTICS AND DAMAGE IN 12Cr STEEL UNDER HIGH TEMPERATURE CREEP AND CREEP-FATIGUE CONDITIONS | |
| Yokota O., Sugiura R., Yoda M., Yokobori A.T. Jr., Yokobori T. |
| 5822 - STRUCTURAL AND RHEOLOGICAL CHARACTERIZATION OF VEGETABLE FIBERS REINFORCED CONCRETE PLASTER | |
| Djoudi A., Khenfer M.M., Samat Yakupov |
| 5827 - EFFECT OF INTERACTION BETWEEN COLLINEAR CRACKS ON THE STRENGTH DISTRIBUTION OF BRITTLE MATERIALS | |
| Ciavarella M., Afferrante L., Valenza E. |
| 5830 - MULTI-LEVEL LINEAR DIMENSION IN FRACTURE. A FRACTAL COHESIVE CRACK REPRESENTATION | |
| Wnuk M.P. |