| 5310 - PROBABILISTIC FATIGUE ANALYSIS FOR STRUCTURAL HEALTH MONITORING | |
| S. S. Kulkarni, Li Sun, B. Moran, S. Krishnaswamy, J. D. Achenbach |
| OVERVIEW ON FAILURE INVESTIGATION: FATIGUE AND STRESS-CORROSION CRACKING ON IAF FLEET | |
| F. Bagnoli, L. Allegrucci |
General Papers
| 2960 - MODE I INTERLAMINAR FRACTURE OF CARBON/EPOXY MULTIDIRECTIONAL LAMINATES | |
| Pereira A.B., De Morais A.B., De Moura M.F.S.F., Magalhaes A.G. |
| 2987 - COMPUTATION OF TWO DIMENSIONAL J-INTEGRAL IN THE CASE OF LARGE STRAINS | |
| Horváth Á., Tomáš Kruml |
| 3032 - STRESS-INDUCED PERIODIC FRACTURE PATTERNS IN THIN FILMS | |
| Volinsky A.A., Moody N.R., Meyer D.C. |
| 3064 - EFFECT OF LARGE LOCAL PLASTIC FLOW ON THE FATIGUE LIFE OF METALLIC MATERIALS | |
| Wang G.S., Blom A.F. |
| 3110 - RECENT ADVANCES IN MODELLING DUCTILE RUPTURE | |
| Benzerga A.A., Besson J., Pineau A. |
| 3127 - BRIDGING THE SCALES WITH STATISTICAL DAMAGE MECHANICS | |
| Krajcinovic D., Rinaldi A., Masahito Mochizuki |
| 3136 - CTOA AS A DYNAMIC FRACTURE CRITERION | |
| Kobayashi A.S. |
| 3153 - CONSTRAINED DIFFUSIONAL CREEP IN ULTRA THIN COPPER FILMS DEPOSITED ON SUBSTRATES | |
| Buehler M.J., Hartmaier A., Gao H. |
| 3156 - SIMULATION ON MICROCRACK INITIATION IN F82H MARTENSITIC STEEL | |
| Huang X., Brueckner-Foit A. |
| 3166 - STRENGTH AND STABILITY OF NANOOBJECTSE | |
| Morozov N.F., Ivanova E.A., Krivtsov A.M., Semenov B.N. |
| 3176 - FINITE ELEMENT MODELING OF DYNAMIC INTERFACIAL RUPTURE AND SLIDING | |
| Coker D., Rosakis A.J., Needleman A. |
| 3229 - ON THE EVALUATION OF INTERFACIAL CRACK INITIATION BY MEANS OF FINITE FRACTURE MECHANICS | |
| Müller A., Hohe J., Becker W. |
| 3277 - RECENT ADVANCES IN MASTER CURVE TECHNOLOGY | |
| Wallin K., Laukkanen A., Nevasmaa P., Planman T. |
| 3328 - A MODIFICATION OF THE RANDOM MIDPOINT DISPLACEMENT METHOD FOR GENERATING ROCK FRACTURE SIMILAR SURFACES | |
| Gothäll R., Eriksson M., Stille H., Dan Mihai Constantinescu, Marcin Knec, Dragos-Alexandru Apostol |
| 3342 - MATRIX FATIGUE DAMAGE EVOLUTION IN A LONGITUDINAL CFRP COMPOSITE | |
| Plumtree A., Ostgathe M. |
| 3344 - AN ELLIPTIC CRACK IN A PIEZOELECTRIC MATERIAL | |
| Saha T.K.., Sergei Alexandrov, Yeau-Ren Jeng |
| 3346 - APPLICATION OF THE VARIATIONAL MULTISCALE METHOD TO DAMAGE OF COMPOSITES | |
| Hund A., Ramm E., S. Hasan |
| 3348 - CONSEQUENCES OF ACOUSTIC EMISSION ON CRACK SPEED AND ROUGHNESS EXPONENT IN BRITTLE DYNAMIC FRACTURE | |
| Parisi A., Ball R.C. |
| 3377 - AB INITIO ANALYSIS ON IDEAL STRENGTH OF NANOSCALE THIN FILM | |
| Umeno Y., Kushima A., Kitamura T. |
| 3410 - STM/SEM METHOD FOR TESTING BENDING STRENGTH OF MEMS BEAMS | |
| Tuncay A., Shepherd C., Zalalutdinov M., Zehnder A.T., Craighead H. |
| 3420 - STABILITY OF A DYNAMIC CRACK PROPAGATING IN AN ELASTIC STRIP | |
| Movchan N.V., Movchan A.B., Willis J.R. |
| 3429 - THE EFFECT OF SURFACE TERRACING AND CONFINED NANOPARTICLES ON CRAZING IN SYMMETRIC PS-B-P2VP THIN FILMS | |
| Lee J.-Y., Crosby A. |
| 3433 - WARM PRE-STRESS EFFECTS ON CLEAVAGE FRACTURE IN CENTER CRACK SPECIMEN | |
| Ayatollahi M.R., Aliniaziazi A., Mostafavi M. |
| 3519 - STRAIN RATE DEPENDENCE OF THE ANISOTROPIC FRACTURE TOUGHNESS OF RUBBER MODIFIED POLYPROPYLENE FILMS | |
| Pandini S., Pegoretti A. |
| 3525 - APPLICATION OF A STRIP-YIELD CRACK CLOSURE MODEL TO CRACK GROWTH PREDICTIONS FOR STRUCTURAL STEEL | |
| Skorupa M., Machniewicz T., Skorupa A., Beretta S. |
| 3528 - UNIVERSAL ASPECTS OF DYNAMIC FRACTURE IN BRITTLE MATERIALS | |
| Livne A., Fineberg J. |
| 3539 - INFLUENCE OF SCANDIUM ON THE KINETICS OF FATIGUE CRACK GROWTH IN 7010 AL – ALLOY | |
| Desmukh M.N., Pandey R.K., Mukhopadhyay A.K. |
| 3567 - INFLUENCE OF BENDING FATIGUE ON RESIDUAL MECHANICAL PROPERTIES OF A γ-TiAl INTERMETALLIC ALLOY | |
| Marino F., Rebuffo A., Sglavo V.M. |
| 3630 - THE INFLUENCE OF BIAXIAL STRESS ON THE FATIGUE BEHAVIOR OF DEFECT-CONTAINING STEELS | |
| McEvily A.J., Endo M., Ishihara S. |
| 3655 - ASSESSMENT OF LOAD RATIO EFFECT ON FATIGUE CRACK GROWTH USING PARTIAL CRACK CLOSURE | |
| Fersini D., Pirondi A. |
| 3658 - FATIGUE CRACK NUCLEATION AND PROPAGATION IN BONDED JOINTS | |
| Pirondi A., Nicoletto G. |
| 3680 - HOW MUCH INPUT IS NEEDED FROM THE MICROSTRUCTURE TO MODEL DUCTILE FRACTURE? | |
| Benzerga A.A., Besson J., Pineau A. |
| 3689 - RUPTURE OF FRICTIONALLY HELD INCOHERENT INTERFACES UNDER DYNAMIC SHEAR LOADING | |
| Lykotrafitis G., Rosakis A.J. |
| 3773 - EXPERIMENTAL INVESTIGATION OF CRACK OPENING ASYMPTOTICS FOR FLUID-DRIVEN FRACTURE | |
| Bunger A.P., Jeffrey R.G., Detournay E. |
| 3840 - A VARIATIONAL APPROACH OF FATIGUE DEBONDING | |
| Marigo J.-J., Jaubert A. |
| 3850 - NUMERICAL APPROACH IN THERMOMECHANICAL FATIGUE | |
| Charkaluk E., Constantinescu A., Thomas J.J. |
| 3899 - ON PRE-FRACTURE ZONE MODELLING FOR AN INTERFACE CRACK IN ANISOTROPIC BIMATERIAL | |
| Loboda V., Sheveleva A., Sergei Sherbakov |
| 3865 - OBSERVATIONS OF DUCTILE FRACTURE PROCESSES UNDER VERY LOW TRIAXIALITY IN QUENCHED AND TEMPERED VAR STEEL AND PRELIMINARY INTERPRETATION | |
| Cannizzaro D., Giovanola J. H., Doglione R., Rossoll A. |
| 3907 - RECENT LIFE ASSESSMENT TECHNOLOGY FOR EXISTING STEAM TURBINES | |
| Saito K., Sakuma A., Fukuda M. |
| 3934 - COMPUTER-AIDED SIMULATION OF MATERIAL LOCAL FRACTURE EFFECTS AT THE AREA OF TRIBOLOGICAL CONTACTS ON THE BASE OF METHODS OF DISCRETE APPROACH | |
| Dmitriev A.I., Kloss H., Santner E., Shilko E.V. |
| 3957 - A LIFETIME PREDICTION MODEL FOR SINGLE CRYSTAL SUPERALLOYS SUBJECTED TO THERMOMECHANICAL CREEP-FATIGUE-OXIDATION DAMAGE | |
| Alam A.M., Remy L., Sergey Aizikovich |
| 3965 - RAIL-WHEEL CONTACT RESEARCH AT THE UNIVERSITY OF NEWCASTLE | |
| Fletcher D., Kapoor A., Franklin F., Vasic G., Smith L. |
| 3972 - A COUPLED THERMOMECHANICAL COHESIVE ZONE MODEL FOR INTERFACE CRACK GROWTH IN THERMAL PROTECTION SYSTEMS | |
| Hattiangadi A., Siegmund T. |
| 3979 - LAP JOINT MSD ASSESSMENT USING A PROBABILISTIC MODEL | |
| Garcia A.N., Irving P. |
| 3988 - MODELING FATIGUE CRACK GROWTH IN CRYSTALLINE SOLIDS WITH DISCRETE DISLOCATION PLATICITY | |
| Balint D.S., Deshpande V.S., Needleman A., Van der Giessen E. |
| 4000 - FRACTURE OF PIEZOELECTRIC MEMS STRUCTURES | |
| Bahr D. F., Olson A.L., Kennedy M.S., Morasch K.R., Richards C.D., Richards R.F. |
| 4016 - EVOLUTION OF THE EQUILIBRIUM STATE OF THE CURVILINEAR CRACKS WITH SURFACES INTERACTING WITH FRICTION DURING THE LOADING PROCESS | |
| Andreev A. |
| 4066 - MATERIAL CHARACTERISATION AT THE MICRO SCALE THROUGH ON-CHIP TESTS | |
| Cacchione F., De Masi B., Corigliano A., Ferrera M. |
| 4081 - DDSIM: A NEXT GENERATION DAMAGE AND DURABILITY SIMULATOR | |
| Emery J.M., Wawrzynek P.A., Ingraffea A.R. |
| 4087 - THREE DIMENSIONAL EFFECTS ALONG THE CRACK FRONT INFLUENCING THE VALIDITY CRITERIA FOR DETERMINING FRACTURE TOUGHNESSES | |
| Zúñiga D.F., Canteli A.F., Kalthoff J.F., Grasa J., Doblaré M. |
| 4090 - FRACTURE TOUGHNESS OF FAST PROPAGATING CRACKS IN ROCK | |
| Bertram A., Kalthoff J.F. |
| 4100 - ON A FINITE ELEMENT WITH EMBEDDED DISCONTINUITIES FOR NUMERICAL MODELING OF FRACTURE | |
| Oliver J., Huespe A., Blanco S., Sviatoslav Hirnyj |
| 4112 - COHESIVE ZONE MODELS IN THE CHARACTERISATION OF TOUGHNESS | |
| Williams J. G., Hadavinia H., Kinloch A.J. |
| 4128 - BRITTLE FRACTURE AND NEAR-SURFACE DAMAGES IN ELECTRONIC MATERIALS DURING THEIR MULTI-WIRE-SAWING AND LAPPING USING LOOSE ABRASIVE | |
| Britvin A.A., Litvinov M.Y. |
| 4129 - MIXED-MODE CRACK GROWTH IN TOUGHENED PMMA | |
| Mariani S., Andena L., Corigliano A., Frassine R. |
| 4150 - FRACTURE TOUGHNESS AND STRENGTH OF FLY ASH CONCRETE | |
| Bressan D., Effting C., Tramontin A. |
| 4156 - OPERATIONAL WEAR AND FRICTION IN MEMS DEVICES | |
| Subhash G., Corwin A.D., De Boer M.P. |
| 4174 - STRESS AND STRAIN IN FRONT OF THE FATIGUE CRACK WITH SHEAR LIPS | |
| Materna A., Oliva V. |
| 4204 - EXPERIMENTAL INVESTIGATION OF STRAIN, DAMAGE AND FAILURE OF HYDRIDED ZIRCONIUM ALLOYS WITH VARIOUS HYDRIDE ORIENTATIONS | |
| Racine A., Bornert M., Sainte Catherine C., Cappelaere C., Caldemaison D. |
| 4206 - FRACTURE STRENGTH OF THIN FILMS STUDIED BY INDENTATION TESTING | |
| Yonezu A., Ogawa T., Takemoto M. |
| 4218 - MESHLESS ANALYSIS OF CRACK PROPAGATION IN MULTIPHASE MATERIAL | |
| Chen Y., Lee J.D., Oskard M.S., Eskandarian A., Reinhard Pippan |
| 4237 - FATIGUE CRACK GROWTH IN WELDED RAILS | |
| Ringsberg J.W., Josefson B.L., Skyttebol A. |
| 4240 - A NOVEL METHOD FOR FRACTURE TOUGHNESS ASSESSMENT OF INHOMOGENEOUS FERRITIC STEEL WELDMENTS USING BIMODAL MASTER CURVE ANALYSIS | |
| Nevasmaa P., Laukkanen A., Planman T., Wallin K. |
| 4255 - FATIGUE PERFORMANCE OF SANDWICH COMPOSITES | |
| Shafiq B., Quispitupa A., Just F. |
| 4256 - TRANSIENT EFFECTS IN ELASTODYNAMIC FRACTURE OF GRADED MATERIALS | |
| Shukla A., Jain N. |
| 4259 - IMPULSIVE NUCLEATION AND FRACTURE OF BRITTLE MATERIALS BY NONLINEAR SURFACE ACOUSTIC WAVES | |
| Hess P., Lomonosov A.M., Lucza T. |
| 4281 - MODELLING OF CRACK ARRESTORS ON GAS-PIPELINES | |
| Fonzo A., Salvini P., Mannucci G., Demofonti G., Di Biagio M., Edwards A. |
| 4291 - SIZE EFFECT EXPERIMENTS ON CONCRETE UNDER MULTIAXIAL COMPRESSION | |
| Elkadi A., van Mier J. |
| 4313 - SEGREGATION OF HYDROGEN AT DISLOCATIONS | |
| Kirchheim R., Pundt A. |
| 4339 - INVESTIGATIONS OF FAILURE BEHAVIOUR OF FLAWED STEEL SPECIMENS WITH ELECTRON BEAM WELDS | |
| Bajric A., Brocks W., Dahl W., Heyer J., Langenberg P. |
| 4340 - CORRELATION BETWEEN FRACTURE BEHAVIOUR AND DUCTILITY OF THE CELL STRUT MATERIAL IN CASE OF METALLIC FOAMS | |
| Ohrndorf A., Krupp U., Christ H. J. |
| 4360 - MATHEMATICAL MODELLING OF DYNAMIC PROCESSES OF IRREVERSIBLE DEFORMING, MICRO- AND MACROFRACTURE OF DAMAGEABLE SOLIDS AND STRUCTURES | |
| Kiselev A.B., Nekhaeva O.V. |
| 4367 - EXPERIMENTAL INVESTIGATION ON COMPETITION BETWEEN WEAR AND RCF IN A RAIL STEEL | |
| Donzella G., Faccoli M., Mazzù A., Roberti R. |
| 4378 - PERFORMANCE OF CREEP CRACK GROWTH ON W STRENGTHENED 9-12Cr STEEL | |
| Kobayashi K.I., Shimizu S., Hirohashi M., Fuji A., Yokobori A.T. Jr |
| 4391 - FRACTAL FINITE ELEMENT METHOD FOR THERMAL STRESS INTENSITY FACTOR CALCULATION | |
| Leung A.Y.T., Sergei Alexandrov |
| 4407 - DESTRUCTIVE EVALUATION AND EXTENDED FATIGUE TESTING OF RETIRED AIRCRAFT FUSELAGE STRUCTURE | |
| Bakuckas Jr. J.G., Carter A., Xieqiao Feng |
| 4421 - MODELING SMALL FATIGUE CRACK GROWTH IN CAST ALUMINUM ALLOYS | |
| Shyam A., Jones J.W., Allison J.E. |
| 4422 - STRESS AND STRAIN FIELDS OF A CRACK-INCLUSION PAIR IN β-SiC: AN ATOMISTIC INVESTIGATION OF NONLINEARITY EFFECTS | |
| Mattoni A., Ippolito M., Colombo L., Cleri F. |
| 4423 - COMPUTATIONAL DYNAMIC FRACTURE ANALYSIS FOR DROP TESTS OF SHIPPING CASKS | |
| Enderlein M., Völzer W., Ricoeur A., Kuna M. |
| 4436 - THEORETICAL AND EXPERIMENTAL MODELING OF THE THERMOMECHANICAL RUPTURE OF PRESSURE TUBE FOR RBMK REACTOR | |
| Medvedeva N.Y., Peshkov I.A., Andreev A.V., Goldstein R.V., Zhitnikov Y.V., Kadochnikov I.V. |
| 4441 - DUCTILE FRACTURE: MATERIAL REMODELLING IN THE PROCESS ZONE | |
| Di Carlo A., Nikolaj Osipenko |
| 4448 - FRACTURE OF Ti/SiC COMPOSITES AT ROOM AND HIGH TEMPERATURE: EXPERIMENTS AND SIMULATIONS | |
| LLorca J., González C., Weck A. |
| 4459 - ROUGHNESS OF BRITTLE CRACK INTERFACES IN BUCKLING BEAM LATTICES | |
| Skjetne B., Helle T., Hansen A. |
| 4471 - APPROPRIATE EXTENDED FUNCTIONS FOR X-FEM SIMULATION OF PLASTIC FATIGUE CRACK GROWTH | |
| Elguedj T., Gravouil A., Combescure A., Angelika Brueckner-Foit |
| 4472 - QUASI-BRITTLE FRACTURE OF FOAM-POLYSTYRENE PLATES WITH HOLE | |
| Legan M., Kolodezev V., Sheremet A. |
| 4475 - FATIGUE AND FRACTURE BEHAVIOR OF NANOCRYSTALLINE COPPER AND NICKEL | |
| Bansal S., Saxena A., Hartwig T., Tummala R.R. |
| 4479 - MODELLING OF CRACK PROPAGATION THROUGH FRAGMENTED SOLIDS | |
| Galybiand A.N., Dyskin A.V. |
| 4486 - BOND SPLITTING STRENGTH OF RC MEMBERS BASED ON LOCAL BOND STRESS AND SLIP BEHAVIOR | |
| Yasojima A., Kanakubo T., Naser Soltani |
| 4494 - AN INVESTIGATION OF THE PROPAGATION OF BRITTLE FRACTURE IN POLYCRYSTALLINE ZINC | |
| Hughes G.M., Flewitt P., Smith G., Crocker A.G. |
| 4502 - APPLICATION OF HYBRID CELLULAR AUTOMATA APPROACH FOR COMPUTER-AIDED EXAMINATION AND FORECAST OF STRENGTH PROPERTIES OF HETEROGENEOUS COAL BEDS | |
| Shilko E., Zavsek S., Pezdic J., Dmitriev A., Dimaki A.V. |
| 4508 - NUMERICAL AND PHYSICAL EXPERIMENTS ON SHEAR BANDING IN SANDSTONE | |
| Labuz J.F., Fakhimi A. |
| 4513 - FAILURE ANALYSIS OF A WIRE ROPE BELONGING TO THE TRACTION SYSTEM OF A CABLE CAR | |
| Pinto A.L., da Costa Viana C. S., Mendonça Brandão L.P., Savi M., Calas Lopes Pacheco P.M., Alberto Carpinteri |
| 4519 - EFFECT OF TENSILE STRENGTH ON PITTING CORROSION RESISTANCE AND HYDROGEN DESORPTION PROFILE IN AUTOMOBILE SPRING STEELS | |
| Kobayashi K., Yamaguchi A., Komazaki S.-I., Misawa T., Kohno Y., Fukuzumi T. |
| 4526 - CORRELATION BETWEEN MAP CRACKING AND DELAYED ETTRINGITE FORMATION IN FIELD SPECIMENS | |
| Amde A.M., Ceary M., Livingston R.A. |
| 4528 - NONLOCAL DAMAGE-PLASTICITY MODEL FOR FAILURE OF CONCRETE | |
| Grassl P., Jirasek M., Alexey Smolin, Sergey Astafurov |
| 4548 - CHARACTERIZATION OF DISTRIBUTED DAMAGE IN CONCRETE USING ADVANCED IMPACT-ECHO METHOD | |
| Livingston R., Sutin A.M., McMorris N., Ceary M., Amde A.M. |
| 4550 - FRACTURE BEHAVIOUR OF MULTIPLE–BOLT ENGINEERED WOOD PRODUCT CONNECTIONS | |
| Snow M., Asiz A., Smith I. |
| 4579 - VALIDATION OF MASSIVELY PARALLEL SIMULATIONS OF DYNAMIC FRACTURE AND FRAGMENTATION OF BRITTLE SOLIDS | |
| Arias I., Knap J., Chalivendra V.B., Hong S., Ortiz M., Rosakis A.J. |
| 4585 - FAILURE MECHANISMS IN BRITTLE LAMINATES | |
| Suiker A.S.J., Fleck N.A., Oleg Naimark |
| 4593 - FAILURE TIME, CRITICAL BEHAVIOUR AND ACTIVATION PROCESSES IN CRACK FORMATION | |
| Ciliberto S., Deschanel S., Guarino A., Santucci S., Scorretti R., Vanel L. |
| 4603 - THE ASYMPTOTIC STESS FIELD FOR FREE EDGE JOINTS UNDER SMALL – SCALE YIELDING CONDITIONS | |
| Marsavina L., Nurse A.D. |
| 4621 - THE COHESIVE SEGMENTS METHOD FOR THE SIMULATION OF FRACTURE | |
| Remmers J., de Borst R., Needleman A. |
| 4633 - FRACTURE TOUGHNESS OF AISI D6 TOOL STEEL AS RECEIVED AND WITH TREATMENT | |
| Bressan J.D., Kohls D., Tramontin A. |
| 4637 - IDENTIFICATION OF LAMINATE MECHANICAL PROPERTIES VIA EXTENDED KALMAN FILTER | |
| Corigliano A., Mariani S., O. Zinovyeva, N. Karpenko |
| 4638 - MODELLING CREEP BEHAVIOR OF A DIRECFTIONALLY SOLIDIFIED NICKEL BASED SUPERALLOY | |
| Ibañez A., Saxena A., Kang J. |
| 4640 - NUMERICAL MODELING OF SHEAR LOCALIZATION IN ELASTOPLASTIC MATERIALS | |
| Bushmanova O., Revuzhenko A. |
| 4651 - PLANE STRESS FRACTURE TOUGHNESS OF DUCTILE POLYMERIC FILMS: EFFECT OF STRAIN RATE ON THE ESSENTIAL WORK OF FRACTURE PARAMETERS | |
| Pegoretti A., Bertoldi E., Ricco T. |
| 4664 - NUMERICAL MODELLING OF FORCED VIBRATIONS OF AN ELASTIC CRACKED BODY UNDER UNILATERAL CONTACT WITH A PUNCH | |
| Bobylov A.A., Dobrova Y.A. |
| 4679 - ROLE OF STRAIN-ASSISTED TRANSPORT OF HYDROGEN ON THE INTERGRANULAR FRACTURE OF NICKEL BASE ALLOYS | |
| Chêne J., Brass A.-M. |
| 4692 - A DYNAMIC VOID GROWTH MODEL | |
| Liu J., Zhang Z., Thaulow C., Elena Pavlyonkova, Anastasiya Artemyeva |
| 4698 - INVESTIGATION ON CYCLIC DEFORMATION BEHAVIOUR OF REINFORCED STEEL BARS | |
| Baydogan M., Uysal A., Kayali E.S., Cimenoglu H. |
| 4699 - CRACK INITIATION IN ENGINEERING THERMOPLASTICS RESULTING FROM CHEMICAL DEGRADATION | |
| Choi B.H., Zhou Z., Chudnovsky A., Sehanobish K. |
| 4701 - STRESS CORROSION CRACK GROWTH IN ENGINEERING PLASTICS | |
| Choi B.H., Zhou Z., Chudnovsky A., Sehanobish K. |
| 4702 - CRACK IDENTIFICATION IN A BEAM BY MEASURE OF THE RESPONSE TO WHITE NOISE | |
| Benfratello S., Cacciola P., Impollonia N., Masnata A., Muscolino G. |
| 4725 - EVOLUTION OF SELF-SIMILAR SETS OF CRACKS. A POSSIBILITY OF LOCALISATION | |
| Dyskin A.V. |
| 4767 - MICRO-MACRO SCALE TRANSITION FOR DAMAGED VISCOELASTIC PARTICULATE COMPOSITES | |
| Nadot-Martin C., Dragon A., Fanget A. |
| 4788 - CONSTITUTIVE MODELING FOR THE UNSTABLE STATES OF MATERIALS BY WAVE DYNAMICS AND VARIATIONAL METHODS | |
| Béda P.B., Béda G., Maxim Artamonov, Denis Zhurko |
| 4816 - NUMERICAL VALIDATION OF THE SIZE ESTIMATES APPROACH FOR ELECTRICAL CONDUCTORS | |
| Bilotta A., Formica G., Turco E., Morassi A., Rosset E. |
| 4817 - COHESIVE ZONE MODELLING OF CRACK GROWTH IN PARTICLE REINFORCED METAL MATRIX COMPOSITES | |
| Rossoll A., Miserez A., Mortensen A. |
| 4823 - SIMULATION OF CREEP CRACK GROWTH OF A DIRECTIONALLY-SOLIDIFIED NI-BASE SUPERALLOY | |
| Gordon A.P., Shenoy M.M., McDowell D.L. |
| 4844 - SIZE EFFECT OF CONCRETE UNDER UNIAXIAL AND FLEXURAL COMPRESSION | |
| Gamino A.L., Borges J.U.A, Bittencourt T.N. |
| 4850 - CRACKS OF HIGHER MODES IN COSSERAT CONTINUA | |
| Pasternak E., Dyskin A., Muhlhaus H.-B. |
| 4865 - CREEP-DAMAGE INTERACTION IN CONCRETE STRUCTURES | |
| Pijaudier-Cabot G., Omar M., Loukili A., Le Pape Y. |
| 4867 - DAMAGE GROWTH AFFECTED BY FRICTIONAL SLIP AND DILATANCY AT CRACK INTERFACES | |
| Seweryn A., Kulchytsky-Zhyhailo R., Mróz Z. |
| 4871 - A GRADIENT DAMAGE MODEL FOR DUCTILE FRACTURE | |
| Lorentz E., Cano V., M. Reiter, T. Adachi |
| 4872 - MICRO STRUCTURAL ORIGIN OF THE APPARENT THERMAL TRANSIENT CREEP OF CONCRETE AT HIGH TEMPERATURE | |
| Mounajed G., Boussa H., Grondin F., Menou A. |
| 4896 - A COMPUTATIONAL METHOD FOR THE PREDICTION OF DAMAGE AND DELAMINATION IN COMPOSITE PIPES | |
| Allix O., Baranger E., Blanchard L., Alexander Arsenkin |
| 4917 - ELEVATED TEMPERATURE FATIGUE CRACK GROWTH MODEL FOR DS-GTD-111 | |
| Yoon K.B., Park T.G., Saxena A. |
| 4941 - EXPERIMENTAL INVESTIGATION AND MODELING ON DYNAMIC FAILURE MODE TRANSITIONS IN LAYERED COMPOSITE MATERIALS | |
| Xu L.R., Rosakis A.J. |
| 4956 - FAILURE ANALYSIS OF THE SUSPENSION SPRING OF A LIGHT DUTY TRUCK | |
| Eryürek B., Ereke M., Göksenli A., Jordi Romeu |
| 4958 - DAMAGE DETECTION USING WAVELET TRANSFORM | |
| Garstecki A., Knitter-Pi Tkowska A., Pozorski Z., Ziopaja K. |
| 4962 - CONCEPT OF CONTINUOUS DAMAGE DEACTIVATION IN MODELLING OF LOW CYCLE FATIGUE | |
| Ganczarski A., Barwacz L., Oleg Naimark |
| 4975 - MORPHOLOGICAL STABILITY OF MULTILAYER SYSTEMS | |
| Sridhar N., Anderson P.M., Misra A., Cox B.N. |
| 4985 - SIZE EFFECTS IN GRAINED MATERIALS: EXTREME VALUE THEORY APPROACH | |
| Carpinteri A., Cornetti P., Puzzi S. |
| 4988 - INFLUENCE OF THE INTERMEDIATE MATERIAL ON THE SINGULAR STRESS FIELD IN TRI-MATERIAL JUNCTIONS | |
| Carpinteri A., Paggi M. |
| 4991 - THEORETICAL AND NUMERICAL INVESTIGATION ON INTERNAL INSTABILITY PHENOMENA IN COMPOSITE MATERIALS | |
| Carpinteri A., Paggi M., Zavarise G. |
| 4992 - FRACTURE CRITERION FOR BRITTLE ROCK-LIKE MATERIALS | |
| Litewka A., Szojda L. |
| 4994 - THE ROLE OF MICROSTRUCTURE ON THE FATIGUE AND FRACTURE PROPERTIES OF MEDICAL GRADE ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE | |
| Pruitt L.A., Simis K.S., Bistolfi A., Bellare A. |
| 5013 - RELATIONSHIP BETWEEN VICKERS HARDNESS AND FATIGUE STRENGTH | |
| Hirano A., Sakane M., Hamada N. |
| 5017 - MOLECULAR ORBITAL STUDY ON INTERFACIAL STRENGTH BETWEEN OXIDE CLUSTER AND POLYIMIDE SUBSTRATE | |
| Fujinami A., Ogata S., Shibutani Y., Yamamoto K. |
| 5022 - STRUCTURAL MONITORING AND LIFE-TIME ASSESSMENT OF MEDIEVAL TOWERS | |
| Carpinteri A., Lacidogna G. |
| 5029 - THE EFFECT OF MULTI-AXIAL STRESS COMPONENT ON CREEP CRACK GROWTH RATE CONCERNING STRUCTURAL BRITTLENESS | |
| Yokobori A.T. Jr., Sugiura R., Tabuchi M., Fuji A., Adachi T., Yokobori T. |
| 5044 - NEW FRACTURE MECHANICS APPROACH TO CHARACTERIZE INTERNAL HYDROGEN EMBRITTLEMENT OF STEEL FOR FITNESS-FOR-SERVICE MODELING | |
| Al-Rumaih A.M., Gangloff R.P. |
| 5046 - NUMERICAL EVALUATION OF CRACKING AND CRUSHING IN ANCIENT MASONRY TOWERS | |
| Carpinteri A., Invernizzi S., Lacidogna G. |
| 5048 - ATOMISTIC SIMULATIONS ON FRACTURE EVENTS IN NANOSTRUCTURED SILICON CARBIDE | |
| Colombo L., Mattoni A., Ippolito M., Cleri F. |
| 5053 - INVESTIGATION OF THE DAMAGE BEHAVIOUR OF NOVEL BIAXIAL REINFORCED WEFT KNITTED COMPOSITES | |
| Hufenbach W., Böhm R., Langkamp A., Kroll L., Gude M. |
| 5060 - MODELLING OF ANISOTROPIC DAMAGE BY MICROCRACKS: TOWARDS A DISCRETE APPROACH WITHIN A STANDARD FRAMEWORK | |
| Bargellini R., Dragon A., Halm D., Waldek Bose Filho |
| 5076 - ONSET, GROWTH, PROGRESSION AND UNIFORMITY OF SHEAR BANDS IN DILATIVE SANDS | |
| Rechenmacher A.L., Carpinteri Alberto |
| 5082 PROBING THE NANOMECHANICAL PROPERTIES OF TEETH | |
| Lim C.T., Hairul Nizam B.R., Chng H.K., Yap A.U.J., Taoufik Boukharouba |
| 5094 - EXPERIMENTAL AND COMPUTATIONAL POLYCRYSTAL STUDIES OF FATIGUE DAMAGE AND CRACK INITIATION | |
| Dunne F., Fielding L., Allen R., Manonukul A. |
| 5114 - STRAIN HISTORY EFFECTS ON FRACTURE MECHANICS PARAMETERS | |
| Ernst H.A., Bravo R.E., Villasante J.A., Izquierdo A. |
| 5115 - NUMERICAL SIMULATION OF 3-D MIXED-MODE CRACK PROPAGATION ON BIMATERIAL INTERFACES | |
| Herr A., Nied H. |
| 5126 - A NUMERICAL MODEL FOR MULTI-LEAF MASONRY | |
| Ramalho M.A., Papa E., Taliercio A., Binda L. |
| 5131 - A COMPUTATIONAL STUDY OF THE FRACTURE BEHAVIOUR OF CONCRETE IN A MODIFIED SPLIT HOPKINSON BAR TEST | |
| Pedersen R., Sluys L., Weerheijm J., Simone A., M. Tkachenko |
| 5153 - NEAR-TIP ASYMPTOTIC ANALYSIS OF A PKN FLUID-DRIVEN FRACTURE WITH NON-LOCAL ELASTICITY EQUATION | |
| Adachi J.I., Peirce A.P. |
| 5160 - ANALYSIS OF THE BOND BETWEEN NEAR-SURFACE MOUNTED CFRP LAMINATE STRIPS AND CONCRETE | |
| Sena-Cruz J., Barros J., Azevedo A. |
| 5177 - EXPLICIT EXPRESSION FOR STRESS IN MULTI-LEVEL LINE STRUCTURES AND IN CONNECTING VERTICAL VIAS | |
| Rosakis A.J., Park T-S., Suresh S. |
| 5178 - METALLURGICAL ASPECTS OF ROCK BOLT ENVIRONMENT FRACTURE | |
| Gamboa E., Villalba E., Atrens A. |
| 5185 - FREE VIBRATION CHARACTERISTICS OF DELAMINATED COMPOSITE ROTATING CANTILEVER SHALLOW SHELLS | |
| Karmakar A., Mishra T.K., Kishimoto K. |
| 5186 - FRACTURE AND FATIGUE PROPERTIES OF Z-PINNED COMPOSITE LAP JOINTS | |
| Chang P., Mouritz A.P., Cox B.N. |
| 5199 - EFFECTS OF MICROSTRUCTURE ON FRACTURE TOUGHNESS IN A533B SUBMERGED ARC WELDS | |
| Farron V.J., do Patrocinio A., Novovic M., Bowen P. |
| 5215 - DAMAGE TOLERANCE ISSUES PECULIAR TO SUPERSONIC CIVIL TRANSPORT AIRCRAFT | |
| Odemer G., Henaff G., Journet B., Remy L., Haddar N., Köster A. |
| 5216 - FRACTURE TOUGHNESS KIvM MEASUREMENT OF NONBRITTLE METALLIC MATERIALS BY “CHEVRON NOTCHED” SPECIMENS | |
| Dal Re V., Zucchelli A. |
| 5218 - NOVEL CHARPY-FRACTURE TOUGHNESS CORRELATIONS FOR PREDICTING REFERENCE TEMPERATURE AND MASTER CURVE | |
| Sreenivasan P.R., Moitra A., Mannan S.L. |
| 5219 - CALCULATION OF NANO-CRYSTALLINE COPPER TOUGHNESS USING THE EMBEDDED ATOM METHOD | |
| Aldazabal J., Luque A., Martinez-Esnaola J.M., Gil Sevillano J. |
| 5224 - INTERACTION OF DYNAMIC CRACKS WITH INCLINED INTERFACES | |
| Chalivendra V.B., Hong S., Rosakis A.J., Arias I., Knap J., Ortiz M. |
| 5253 - DYNAMIC MASTER CURVE AND DUCTILE-BRITTLE TRANSITION TEMPERATURE OF 9Cr-1 Mo Steel | |
| Moitra A., Sreenivasan P.R., Mannan S.L., Singh V. |
| 5267 - SELF-ASSEMBLED MONOLAYERS AND MODE-MIX DEPENDENT TRACTION-SEPARATION LAWS FOR INTRINSIC INTERFACIAL FRACTURE | |
| Liechti K.M., Mello A., A.A. Sirotin, Yu.K. Bivin, Kirill Osipenko |
| 5257 - AN EXPERIMENTAL/NUMERICAL INVESTIGATION OF THE DYNAMIC FRACTURE CHARACTERISTICS OF PMMA | |
| Murphy N., Ivankovic A. |
| 5259 - OSCILLATING FRACTURE PATHS IN THIN BRITTLE SHEETS: WHEN GEOMETRY RULES CRACK PROPAGATION | |
| Basile A., Reis P.M., Roman B. |
| 5263 - IDENTIFICATION OF EXTERNAL LOADS TO DYNAMIC SYSTEMS AS THE METHOD OF DEFECTS DEFINITION | |
| Menshikov Y., Yuri Petrov, A. Lukin, Victor Kats, Svetlana Atroshenko, G. Fedorovskii |
| 5291 - OBSERVATION AND PREDICTION OF LOCAL DAMAGE PATTERNS UNDER TENSION AND TORSION HIGH CYCLE FATIGUE | |
| Flaceliere L., Morel F., Dragon A. |
| 5293 - A VARIATIONAL APPROACH TO STRESS-INDUCED INSTABILITIES IN HETEROEPITAXIAL GROWTH | |
| Bonnetier E., Brassel M., Chambolle A., Jouve F. |
| 5294 - FEATURES OF PLASTIC FLOW AND FRACTURE OF SUBMICROCRYSTALLINE ARMCRO-IRON WITH BANDED FRAGMENTED SUBSTRUCTURE | |
| Son A. |
| 5313 - A THERMOMECHANICAL FATIGUE CRACK INITIATION MODEL FOR DIRECTIONALLY-SOLIDIFIED NI-BASE SUPERALLOYS | |
| Gordon A.P., Shenoy M., Neu R.W. |
| 5315 - ANALYSIS OF A FULL-SCALE BLAST TEST AND RETROFIT DESIGN | |
| Maji A.K., Brown J.P., Giuseppe Lacidogna, Alberto Carpinteri |
| 5324 - LOCAL CRITERIA OF BRITTLE AND DUCTILE FRACTURE AND APPLICATION OF LOCAL APPROACH TO FRACTURE MECHANICS PROBLEMS | |
| Margolin B.Z., Gulenko A.G., Kostylev V.I., Shvetsova V.A. |
| 5328) MESOMECHANICAL ASPECTS OF THIN FILM FRACTURE | |
| Panin A.V., Shugurov A.R., Schreiber J., N.E. Pirogova |
| 5401 - MESOSCOPIC LEVELS OF PLASTIC FLOW WITHIN SURFACE LAYERS OF POLYCRYSTALS AND THEIR FATIGUE FRACTURE UNDER CYCLIC BENDING | |
| Elsukova T.F., Panin V.E., Egorushkin V.E, Panin A.V., Kuzina O.Y. |
| 5405 - EVOLUTION OF THE CRACK-PATTERN AS A VISIBLE EFFECT OF LONG TERM DAMAGE | |
| Binda L., Anzani A. |
| 5410 - MODELING OF DYNAMIC FRAGMENTATION IN BRITTLE SOLIDS | |
| Gommerstadt B., Chudnovsky A. |
| 5414 - FATIGUE OF SELF-HEALING POLYMERS: MULTISCALE ANALYSIS AND EXPERIMENTS | |
| White S.R., Maiti S., Jones A.S., Brown E.N., Sottos N.R., Geubelle P.H. |
| 5422 - RAIL LIFE PREDICTION FOR TRAMCARS UNDER FULL SLIP REGIME HERNAN, DESIMONE | |
| Beretta S., Desimone H., Kapoor A. |
| 5423 - A SHORT CRACK MODEL FOR FATIGUE LIMIT OF PRESS-FITTINGS IN RAILWAY AXLES | |
| Beretta S., Cerrini A., Faustini V. |
| 5428 - EXPERIMENTAL AND NUMERICAL INVESTIGATION ON THE CREEP CRACK GROWTH IN IN718 | |
| Lo Conte A. |
| 5431 - SCALING PROPERTIES OF THE THREE DIMENSIONAL FUSE MODEL AS A MODEL FOR BRITTLE FRACTURE | |
| Ramstad T., Hansen A. |
| 5450 - PRELIMINARY INVESTIGATION BY SYNCHROTRON RADIATION OF CRACKS AND DEFECTS IN AA FSW SAMPLES | |
| Cosmi F., Cristofori A., Mancini L., Tovo R., Tromba G., Volpone M. |
| 5457 - INFLUENCE OF RESIDUAL STRESSES ON BRITTLE FRACTURE OF FERRITIC STEELS | |
| Mirzaee Sisan A., Truman C.E., Smith D. J. |
| 5463 - FATIGUE FRACTURE OF POLY BONE CEMENT CONTAINING RADIOPACIFIER NANOPARTICLES | |
| Bellare A., Turell M.E., Gomoll A., Thornhill T.S. |
| 5466 - FRACTURE ROUGHNESS FOR THE TWO-DIMENSIONAL CENTRAL FORCE MODEL | |
| Bakke J.Ø.H., Ramstad T., Hansen A |
| 5468 - A MECHANISM OF FAILURE OF CONCRETE AND ROCK IN COMPRESSION | |
| Dyskin A.V., Pasternak E. |
| 5471 - EFFECTS OF VARYING MEAN STRESS AND STRESS AMPLITUDE ON THE FATIGUE OF POLYSILICON | |
| Ballarini R., Kahn H., Heuer A.H. |
| 5472 - DIFFUSION AND STRAIN-ASSISTED TRANSPORT AND TRAPPING OF HYDROGEN IN FERRITIC STEELS | |
| Brass A.-M., Chêne J. |
| 5475 - PHYSICAL MESOMECHANICS OF QUASI-VISCOUS FAILURE: THEORY AND EXPERIMENT | |
| Egorushkin V.E., Panin V.E., Panin A.V. |
| 5477 - THE FRACTURE PROBLEM IN THE FRAMEWORK OF GENERALIZED STATISTICAL MECHANICS | |
| Miraldi E., Kaniadakis G., Scarfone A.M., Cravero M., Iabichino G. |
| 5478 - LIBRARY OF GEOMETRIC INFLUENCES FOR SIF WEIGHT FUNCTIONS | |
| Brennan F.P., Teh L.S., Love A.J. |
| 5480 - NON-LINEAR SLIP-WEAKENING IN A ROTARY GOUGE FRICTION EXPERIMENT | |
| Chambon G., Schmittbuhl J., Corfdir A. |
| 5481 - DOES ELASTIC REBOUND THEORY APPLY TO SEISMIC FAULTS? | |
| Ziv A., Cochard A., Schmittbuhl J. |
| 5482 - CORRELATIONS OF STRESS DISTRIBUTIONS ALONG THE FAULT: FROM LABORATORY FRACTURE ROUGHNESS TO FAULT ASPERITY SQUEEZE | |
| Schmittbuhl J., Chambon G., Hansen A., Bouchon M. |
| 5484 - DISCRETE MODELS OF INTERFACE DAMAGE | |
| Haussy B., Ganghoffer J.F., Mandana Arzaghi, Christine Sarrazin-Baudoux, Jean Petit |
| 5487 - ASR-SENSITIVE SLOW-LATE-AGGREGATES; MACRODAMAGE AND MICROSTRUCTURE | |
| Stark J., Berninger A.M., Freyburg E. |
| 5496 - APPLICATION OF THE ENERGY PARAMETER FOR FATIGUE LIFE ESTIMATION UNDER UNIAXIAL RANDOM LOADING WITH THE MEAN VALUE | |
| Kluger K., Karolczuk A., Lagoda T., Macha E. |
| 5506 - STEADY-STATE MODEL OF DELAYED HYDRIDE CRACKING IN ZIRCONIUM ALLOYS | |
| Matvienko Y.G., Shmakov A.A. |
| 5509 - TIME-SCALE EFFECTS ON ACOUSTIC EMISSION DUE TO ELASTIC WAVES PROPAGATION IN MONITORED CRACKING STRUCTURES | |
| Carpinteri A., Lacidogna G., Pugno N. |
| 5528 - EXPERIMENTAL STUDIES OF MIXED MODE SPONTANEOUS FRACTURES EXPANDING ALONG WEAK PLANES | |
| Xia K., Chalivendra V., Rosakis A.J. |
| 5529 - TIME DISCONTINUOUS GALERKIN METHOD FOR DYNAMIC CRACK GROWTH USING X-FEM | |
| Réthoré J., Gravouil G., Combescure A. |
| 5530 - ON VARIATIONAL FORMULATIONS FOR THE TRANSITION FROM ELASTO-DAMAGING TO ELASTO-FRACTURING BEHAVIOR | |
| Benvenuti E., Tralli A., E. Tikhomirova, A. Rybnikov |
| 5532 - ON THE STRUCTURE OF PLASTIC AND DAMAGE ZONES IN DIFFERENT MATERIALS AT VARIOUS SCALES | |
| Botvina L.R., Korsunsky A.M. |
| 5534 - DEFECT POPULATION STATISTICS NEAR AND FAR FROM A CRITICAL EVENT | |
| Korsunsky A.M., Botvina L.R. |
| 5542 - MULTI-SCALE MODELING OF DEFORMATION IN POLYCRYSTALLINE THIN METAL FILMS | |
| Hartmaier A., Buehler M.J., Gao H. |
| 5556 - SCALE-INDEPENDENT CONSTITUTIVE LAW FOR CONCRETE IN COMPRESSION | |
| Carpinteri A., Ferro G., Ventura G. |
| 5567 - LONG TERM DAMAGE OF HISTORIC MASONRY STRUCTURES | |
| Binda L., Saisi A. |
| 5577 - EFFECT OF RESIDUAL STRESSES DUE TO LASER WELDING ON THE STRESS INTENSITY FACTORS OF ADJACENT CRACK | |
| Labeas G., Tsirkas S., Diamantakos J., Kermanidis A. |
| 5581 - COMPARATIVE THEORETICAL-EXPERIMENTAL EVALUATION OF CONROD LITTLE-EYE STRESS ANALYSIS | |
| Cascella M.T., Rossi M., Cassani S., Costa A. |
| 5600 - BOUNDARY INTEGRAL FRACTURE ANALYSIS AND HYPERSINGULAR EVALUATION | |
| Salvadori A., Phan A.-V., Gray L. J. |
| 5602 - THE EFFECT OF PRE-STRAIN ON THE FRACTURE TOUGHNESS OF LINE PIPE STEEL | |
| Cosham A., Hopkins P., Palmer A. |
| 5611 - CRACK-LIKE AND PULSE-LIKE DYNAMIC FRICTIONAL SLIDING | |
| Coker D., Lykotrafitis G., Needleman A., Rosakis A.J. |
| 5614 - FATIGUE DAMAGE ACCUMULATION IN UNIDIRECTIONAL COMPOSITE UNDER APPLIED CYCLING TENSION LOAD | |
| Megnis M., Krasnikovs A. |
| 5616 - FATIGUE BEHAVIOUR PREDICTION OF LASER SURFACE TREATED ALUMINIUM PLATES THROUGH SIMULATION OF THE LASER STRIPPING PROCESS | |
| Pantelakis S., Labeas G., Kermanidis A., Tsirkas S. |
| 5618 - THE USE OF CONTROLLED SHOT PEENING TO IMPROVE THE FRETTING FATIGUE BEHAVIOUR OF FLAT ON FLAT ALUMINIUM CONTACT | |
| Pantelakis S., Rodopoulos A., Brown M.W., Gardiner S., Edwards R. |
| 5639 - PRACTICAL SOLUTION FOR AVOIDING FAILURE OF ABSORPTION TOWER AT A NITRIC ACID PLANT - REPLACING WELDING BY MECHANICAL JOINING - | |
| El-Batahgy A., Zaghloul B., Evgenia Kuleshova, Ya. Shtrombakh, O. Zabusov, Denis Zhurko |
| 5640 - FATIGUE OF OFF SHORE CONDENSATE RECYCLE LINE AT NATURAL GAS PRODUCTION FIELD | |
| El-Batahgy A., Zaghloul B., Tao Qian |
| 5641 - ON TWO-SCALE MODEL OF FRACTURE MESOMECHANICS OF COMPOSITES WITH CRACKS UNDER COMPRESSION | |
| Guz A.N. |
| 5644 - NUMERICAL OPTIMIZATION OF CRUCIFORM SPECIMENS GEOMETRY FOR PERFORMED THROUGH AND SEMI-ELLIPTICAL FATIGUE CRACKS UNDER BIAXIAL CYCLIC LOADS AND CRACK GROWTH SIMULATION | |
| Shaniavski A.A., Radchiev A., Potapenko Y.A. |
| 5645 - COMPARISON BETWEEN NOTCH AND DEFECT IN MULTIAXIAL FATIGUE | |
| Morel F., Morel A., Nadot Y. |
| 5646 - SPLASH TEST NUMERICAL MODELISATIONS | |
| Constantinescu A., Amiable S., Chapuliot S., Fissolo A. |
| 5654 - A NLFM METHOD FOR THE PREDICTION OF SLABS ON GRADE BEHAVIOUR | |
| Belletti B., Bernardi P., Meda A., Plizzari G. |
| 5690 - MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF AL 6056 FRICTION STIR WELDED JOINTS | |
| Cavaliere P., Nobile R, Panella F.W., Squillace A. |
| 5691 - SIGNIFICANCE OF DWT TESTING FOR LINE PIPE SAFETY | |
| Erdelen-Peppler M., Gehrmann R., Junker G., Knauf G., Liessem A. |
| 5699 - FRACTURE CHARACTERISTICS OF AGGREGATES SUBMITTED TO ALKALI SILICA REACTIONS | |
| BenHaha M., Guidoum A., Scrivener K. |
| 5703 - FINITE ELEMENT MODELING OF PRESSURE VESSEL WITH TWO INTERNAL SURFACE CRACK | |
| Argoub E., Sedmak A., Burzic Z., Adziev G. |
| 5716 - RUNOUT ANALYSIS IN FATIGUE INVESTIGATION | |
| Sarkani S., Mazzuchi T. A., Lewandowski D., Kihl D.P. |
| 5718 - FINE DESCRIPTION OF FRACTURE BY USING DISCRETE PARTICLE MODEL | |
| Delaplace A., Ch. Motz, Reinhard Pippan, Ch. Guster |
| 5719 - STATIC AND DYNAMIC FRACTURE MECHANICS PARAMETERS OF MATERIAL IN THE HEAT-AFFECTED-ZONE | |
| Sedmak S., Geric K., Grabulov V., Burzic Z., Sedmak A. |
| 5723 - HYSTERETIC FLEXURAL BEHAVIOUR OF A REINFORCED CONCRETE BEAM WITH A T CROSS-SECTION | |
| Carpinteri A., Spagnoli A., Vantadori S. |
| 5734 - DYNAMIC EFFECTS IN CRACK BRIDGING | |
| Cox B.N., Rosakis A., Sridhar N., Yang Q.D. |
| 5764 - CAVITATION AND FRACTURE OF SOFT ADHESIVES | |
| Creton C., Chiche A., Dollhofer J., Roos A., Hui C.Y., Muralidharan V. |
| 5768 - SIMULATION OF DEFORMATION BEHAVIOR OF POLYMERIC MATERIALS BY CHAIN NETWORK MODEL | |
| Shinozaki A., Kishimoto K., Inoue H. |
| 5802 - SIZE AND SCALE EFFECTS IN FRETTING FATIGUE THRESHOLDS | |
| Dini D., Nowell D., Korsunsky A.M. |
| 5822 - STRUCTURAL AND RHEOLOGICAL CHARACTERIZATION OF VEGETABLE FIBERS REINFORCED CONCRETE PLASTER | |
| Djoudi A., Khenfer M.M., Samat Yakupov |