General Papers
| 2900 - FRACTURE MECHANISM OF A TIAL ALLOY | |
| Chen J.H., Cao R., Wang G.Z., Zhang J. |
| 2978 - AN ATOMISTIC VIEW OF INTERFACE SLIDING AND DISLOCATION PLASTICITY IN THIN FILMS | |
| Shen Y.-L., Leger R.W. |
| 3023 - EXPERIMENTAL INVESTIGATIONS AND MODELING OF BOND BETWEEN ROUND STRAND ROPES AND CONCRETE | |
| Avak R., Wille F., Javier Belzunce |
| 3036 - SPACE–TIME FINITE ELEMENT TECHNIQUES FOR COMPUTATION OF FLUID–STRUCTURE INTERACTIONS | |
| Tezduyar T., Sathe S., Keedy R., Stein K. |
| 3040 - THE OPTIMAL DESIGN FOR FATIGUE LIFE USING BIOLOGICAL METHOD | |
| Peng D., Jones R. |
| 3070 - USE OF EBSD TO STUDY HYDROGEN INDUCED CRACKING IN PIPELINE STEEL | |
| Venegas V., Caleyo F., González J. L., Baudin T., Hallen J.M., Penelle R. |
| 3232 - OPTIMAL SHAPE DESIGN WITH FATIGUE LIFE AS DESIGN CONSTRAINT USING A 3D BIOLOGICAL METHOD | |
| Das R., Jones R., Peng D., Dieter Siegele |
| 3233 - THERMOMECHANICAL CRACK INITIATION AND EARLY GROWTH IN 1CrMoV NOTCHED SPECIMENS | |
| Mazza E., Colombo F., Holdsworth S.R., Skelton R.P. |
| 3243 - A MECHANICS BASED STUDYOF THE FATIGUE CRACK GROWTH THRESHOLD SIZE EFFECT | |
| Daniewicz S. R., Johnston S. R., Potirniche G.P. |
| 3328 - A MODIFICATION OF THE RANDOM MIDPOINT DISPLACEMENT METHOD FOR GENERATING ROCK FRACTURE SIMILAR SURFACES | |
| Gothäll R., Eriksson M., Stille H., Dan Mihai Constantinescu, Marcin Knec, Dragos-Alexandru Apostol |
| 3341 - THE INFLUENCE OF PRE-AGING, TEMPERATURE, MEAN AND LOCAL STRAIN ON LOW CYCLE AND THERMO-MECHANICAL FATIGUE | |
| Riedler M., Minichmayr R., Eichlseder W. |
| 3345 - EVALUATION OF CREEP BEHAVIOUR AND FATIGUE LIFE UNDER TMF-LOADING FOR ALLOY AlCuBiPb | |
| Minichmayr R., Riedler M., Eichlseder W. |
| 3348 - CONSEQUENCES OF ACOUSTIC EMISSION ON CRACK SPEED AND ROUGHNESS EXPONENT IN BRITTLE DYNAMIC FRACTURE | |
| Parisi A., Ball R.C. |
| 3359 - ON FLUID-DRIVEN CRACK PROPAGATION ALONG BIMATERIAL INTERFACES | |
| Zhang X., Jeffrey R., Saeid Hadidi-Moud |
| 3392 - EXPERIMENTAL DETERMINATION OF CTOA TOUGHNESS | |
| Hashemi S.H., Gay R., Howard I.C., Yates J.R., Andrews R.M. |
| 3448 - MICROMECHANICS-BASED MODELING OF DAMAGE EVOLUTION IN VISCOELASTIC COMPOSITES | |
| Talreja R., Kumar R., Elena Vilchevskaya |
| 3486 - ANALYSIS OF DISCONTINUITIES IN FLUID-SATURATED MEDIA | |
| Abellan M.A., de Borst R., Bergheau J.M., J-C. Ménard |
| 3539 - INFLUENCE OF SCANDIUM ON THE KINETICS OF FATIGUE CRACK GROWTH IN 7010 AL – ALLOY | |
| Desmukh M.N., Pandey R.K., Mukhopadhyay A.K. |
| 3580 - SIMULATING MICROSTRUCTURE-RELATED LCF VARIABILITY IN NICKEL-BASE SUPERALLOYS | |
| Kumar R.S., McDowell D.L. |
| 3661 - CRACK PROPAGATION MECHANISM IN ROUNDED COHESIVE GRANULAR MEDIA | |
| Preechawuttipong I., Ingsuwan P., Jacque S., Peyroux R. |
| 3671 - T-STRESS AND MODE I FATIGUE CRACK GROWTH | |
| Hamam R., Pommier S., Bumbieler F. |
| 3740 - VISUALISATION AND QUANTIFICATION OF FATIGUE INDUCED MICRODAMAGE IN BONE: HISTOLOGY AND RADIOLOGY | |
| Lee C., O’Brien F., Taylor D., Parkesh R., Gunnlaugsson T. |
| 3772 - NUMERICAL SIMULATIONS OF MIXED-MODE DUCTILE FRACTURE INITIATION | |
| Narasimhan R. |
| 3773 - EXPERIMENTAL INVESTIGATION OF CRACK OPENING ASYMPTOTICS FOR FLUID-DRIVEN FRACTURE | |
| Bunger A.P., Jeffrey R.G., Detournay E. |
| 3865 - OBSERVATIONS OF DUCTILE FRACTURE PROCESSES UNDER VERY LOW TRIAXIALITY IN QUENCHED AND TEMPERED VAR STEEL AND PRELIMINARY INTERPRETATION | |
| Cannizzaro D., Giovanola J. H., Doglione R., Rossoll A. |
| 3878 - HYDROGEN ENVIRONMENT EMBRITTLEMENT OF LOW ALLOY STEEL AT ROOM TEMPERATURE | |
| Wada Y., Ishigaki R., Tanaka Y., Iwadate T., Ohnishi K. |
| 3905 - NUMERICAL INVESTIGATION OF DEFORMATION AND FRACTURE IN ALUMINUM-ALUMINA AT THE MESOSCALE | |
| Balokhonov R.R., Romanova V.A. |
| 3920 - SKIN-STRINGER DEBONDING AND DELAMINATION ANALYSIS IN COMPOSITE STIFFENED SHELLS | |
| Rikards R., Kalnins K., Ozolinsh O. |
| 3953 - IDENTIFICATION OF SHEAR WALL FAILURE MODE | |
| Cervenka V., Novak D., Lehky D., Pukl R. |
| 3981 - A COMPARISON OF TWO EXPERIMENTAL METHODS FOR ASSESSING THE INFLUENCE OF INITIAL DEFECTS ON FATIGUE LIFE | |
| Gänser H.-P., Gódor I., Eichlseder W., Vollgger R., Pippan R., Ofner R. |
| 3990 - ON NONLOCALITY AND LOCALITY: DIFFERENTIAL AND DISCRETE FORMULATIONS | |
| Ferretti E., Andreas Ricoeur |
| 4000 - FRACTURE OF PIEZOELECTRIC MEMS STRUCTURES | |
| Bahr D. F., Olson A.L., Kennedy M.S., Morasch K.R., Richards C.D., Richards R.F. |
| 4074 - THE EFFECT OF CYCLIC BENDING STRAINS ON THE BEHAVIOR OF SUPERELASTIC NICKEL-TITANIUM WIRES AND ENDODONTIC INSTRUMENTS | |
| Bahia M.G.A., Dias R.F., V.T.L. Buono |
| 4121 - FRACTURE ENERGY IN MODE I AND MODE II OF REINFORCED WOOD | |
| Haller P., Putzger R. |
| 4129 - MIXED-MODE CRACK GROWTH IN TOUGHENED PMMA | |
| Mariani S., Andena L., Corigliano A., Frassine R. |
| 4177 - BIAXIAL TESTING OF NUCLEAR PRESSURE VESSEL STEEL USING SMALL SCALE CRUCIFORM SPECIMENS | |
| Joyce J.A., Link R.L., Roe C., Gaies J. |
| 4207 - DESIGN OF FASTENINGS BASED ON THE FRACTURE MECHANICS | |
| Eligehausen R., Ozbolt J., Bohdan Klym, Valentin Skalsky, Sergey Builo |
| 4225 - FRACTURE OF ATOMIC LAYER DEPOSITED TUNGSTEN FILMS | |
| Moody N.R., Jungk J.M., Mayer T.M., Wind R.A., George S.M., Gerberich W.W. |
| 4265 - LOCALIZED CHEMICAL ENVIRONMENTS AND THE IMPLICATIONS ON FATIGUE IN AIRCRAFT STRUCTURES | |
| Kelly R.G., Oscar Borla, Giuseppe Lacidogna, Amedeo Manuello Bertetto |
| 4268 - APPLICATION OF IMPACT-ECHO TECHNIQUES FOR CRACK DETECTION AND CRACK PARAMETER ESTIMATION IN CONCRETE | |
| Grosse C.U., Reinhardt H.W., Krüger M., Beutel R. |
| 4290 - THERMODYNAMICAL ASPECTS OF IMPLICIT GRADIENT DAMAGE | |
| Peerlings R.H.J., Geers M.G.D., Panagiotis Chatzistergos, Christos Markides |
| 4308 - FRACTURE MECHANICS FOR ELECTROACTIVE MATERIALS | |
| McMeeking R.M. |
| 4313 - SEGREGATION OF HYDROGEN AT DISLOCATIONS | |
| Kirchheim R., Pundt A. |
| 4315 - FIRST-PRINCIPLES CALCULATIONS OF TENSILE STRENGTH OF COPPER-ALUMINA INTERFACES AND THE DEVELOPMENT OF INTERATOMIC POTENTIALS | |
| Kohyama M., Tanaka S., Yang R. |
| 4367 - EXPERIMENTAL INVESTIGATION ON COMPETITION BETWEEN WEAR AND RCF IN A RAIL STEEL | |
| Donzella G., Faccoli M., Mazzù A., Roberti R. |
| 4380 - AN IMPLICIT GRADIENT STRESS FAILURE CONDITION | |
| Tovo R., Livieri P., Benvenuti E. |
| 4386 - CRACK NUCLEATION AND PROPAGATION DURING FATIGUE OF THIN METAL FILMS | |
| Kraft O., Schwaiger R., Zhang G.P., Volkert C. |
| 4395 - HYDROGEN EFFECTS ON MATERIALS FOR THE HYDROGEN ECONOMY | |
| Jones R.H. |
| 4436 - THEORETICAL AND EXPERIMENTAL MODELING OF THE THERMOMECHANICAL RUPTURE OF PRESSURE TUBE FOR RBMK REACTOR | |
| Medvedeva N.Y., Peshkov I.A., Andreev A.V., Goldstein R.V., Zhitnikov Y.V., Kadochnikov I.V. |
| 4455 - QUANTIZED FRACTURE MECHANICS AND STRENGTH OF DEFECTIVE NANOTUBES | |
| Pugno N., Ruoff R. |
| 4462 - THE EFFECT OF R-RATIO ON THE FATIGUE CRACK PROPAGATION RESISTANCE OF HUMAN CORTICAL BONE | |
| Rimnac C., Akhavan S., Kayacan R., Varadarajan R. |
| 4475 - FATIGUE AND FRACTURE BEHAVIOR OF NANOCRYSTALLINE COPPER AND NICKEL | |
| Bansal S., Saxena A., Hartwig T., Tummala R.R. |
| 4488 - CALIBRATION OF A COHESIVE ZONE FOR CRAZING IN GLASSY POLYMERS | |
| Saad N., Estevez R., Olagnon C., Séguéla R. |
| 4490 - OBTAINING THE CONSTITUTIVE TENSILE RELATION OF CONCRETE THROUGH INVERSE ANALYSIS | |
| Antunes de Oliveira e Sousa J.L., Gettu R., Sergey Razorenov |
| 4526 - CORRELATION BETWEEN MAP CRACKING AND DELAYED ETTRINGITE FORMATION IN FIELD SPECIMENS | |
| Amde A.M., Ceary M., Livingston R.A. |
| 4529 - APPLICATION OF A GRADIENT DUCTILE DAMAGE MODEL TO METAL FORMING PROCESSES INCLUDING CRACK PROPAGATION AND MESH ADAPTIVITY | |
| Mediavilla J., Peerlings R.H.J., Geers M.G.D, U. Kivisäkk |
| 4546 - RISK ASSESSMENT OF LOW-TEMPERATURE CRACKING OF ASPHALT - AN EXPERIMENTAL STUDY | |
| Spiegl M., Wistuba M., Blab R., Lackner R. |
| 4547 - FAILURE OF EQUINE COMPACT BONE UNDER IMPACT LOADING | |
| Davy D., Shazly M., Kayacan R., Prakash V., Rimnac C. |
| 4548 - CHARACTERIZATION OF DISTRIBUTED DAMAGE IN CONCRETE USING ADVANCED IMPACT-ECHO METHOD | |
| Livingston R., Sutin A.M., McMorris N., Ceary M., Amde A.M. |
| 4580 - FORMULATION AND IMPLEMENTATION OF A STRONG DISCONTINUITY MODEL FOR GRANULAR ROCKS INCORPORATING THE EFFECT OF SLIP SPEED ON FRICTIONAL RESISTANCE | |
| Borja R.I., Foster C.D., Regueiro R.A. |
| 4593 - FAILURE TIME, CRITICAL BEHAVIOUR AND ACTIVATION PROCESSES IN CRACK FORMATION | |
| Ciliberto S., Deschanel S., Guarino A., Santucci S., Scorretti R., Vanel L. |
| 4621 - THE COHESIVE SEGMENTS METHOD FOR THE SIMULATION OF FRACTURE | |
| Remmers J., de Borst R., Needleman A. |
| 4641 - EFFECT OF FLUID COMPRESSIBILITY AND BOREHOLE RADIUS ON THE PROPAGATION OF A FLUID-DRIVEN FRACTURE | |
| Lhomme T., Detournay E., Jeffrey R.G. |
| 4684 - THEORETICAL FRAMEWORK FOR COUPLING OF NON-LOCAL DAMAGE AND VISCOPLASTICITY FOR DYNAMIC LOCALIZATION PROBLEMS | |
| Voyiadjis G., Abu Al-Rub R., Andrey Vasiliev, Sergey Volkov |
| 4749 - SHOT-PEENING EFFECT IN CORROSION FATIGUE STRENGTH OF STRUCTURAL MATERIALS | |
| Ebara R., Jacob Kleiman |
| 4760 - ATOMIC SCALE FRICTION AND ITS CONNECTIONS TO FRACTURE | |
| Carpick R.W. |
| 4768 - FRACTURE AND FATIGUE BEHAVIOUR OF MEMS RELATED MICRO MATERIALS | |
| Walter H., Dudek R., Michel B. |
| 4777 - MODELING DELAMINATION FRACTURE WITH FRICTIONAL CONTACT IN ORTHOTROPIC LAMINATES | |
| Massabò R., Brandinelli L. |
| 4805 - SIMULATION OF FATIGUE CRACK PROPAGATION IN DUCTILE METALS BY BLUNTING AND RE-SHARPENING | |
| Levkovitch V., Svendsen B., Sievert R. |
| 4800 - FRACTURE TOUGHNESS IN ADVANCED MONOLITHIC CERAMICS –SEPB VERSUS SEVNB METHODS– | |
| Choi S. R., Gyekenyesi J. P. |
| 4843 - IMPROVEMENT OF CONCRETE DURABILITY BY BACTERIAL MINERAL PRECIPITATION | |
| Ramakrishnan V., Panchalan R.K., Bang S.S., Anna Khokhlova |
| 4857 - ON RECENT PROGRESS IN THE THEORY AND NUMERICS OF MATERIAL FORCES | |
| Denzer R., Steinmann P., Leonid Krenev |
| 4864 - A MULTI-SCALE METHOD FOR MASONRY COMPUTATIONS | |
| Massart T.J., Peerlings R.H.J, Geers M.G.D. |
| 4867 - DAMAGE GROWTH AFFECTED BY FRICTIONAL SLIP AND DILATANCY AT CRACK INTERFACES | |
| Seweryn A., Kulchytsky-Zhyhailo R., Mróz Z. |
| 4871 - A GRADIENT DAMAGE MODEL FOR DUCTILE FRACTURE | |
| Lorentz E., Cano V., M. Reiter, T. Adachi |
| 4892 - CHARACTERIZATION AND MODELING OF LOCALIZED CORROSION DAMAGE ACCUMULATION FOR AIRCRAFT STRUCTURAL INTEGRITY | |
| Buchheit R.G., Birbilis N., Gambina F. |
| 4901 - ASSESSING FATIGUE CRACK GROWTH IN RAILWAY AXLES | |
| Hillmansen S., Smith R.A. |
| 4913 - A ONE-DIMENSIONAL INTRODUCTION TO CHEMICAL STRAINS AND STRESSES WITH APPLICATIONS TO DIFFUSION IN CRACKED SOLIDS | |
| Wu C.H., Liu P., Camille Robert, Thierry Palin-Luc, Franck Morel |
| 4956 - FAILURE ANALYSIS OF THE SUSPENSION SPRING OF A LIGHT DUTY TRUCK | |
| Eryürek B., Ereke M., Göksenli A., Jordi Romeu |
| 5011 - ELASTIC CONSTANTS OF A Pd-H CRYSTAL WITH COHERENT INTERPHASES | |
| Schwarz R.B., Tuggle D., Bach H. |
| 5025 - COMPARABILITY OF RESULTS VIA THE MINIATURISED SMALL PUNCH CREEP TEST METHOD AND TRADITIONAL UNIAXIAL CREEP TESTING | |
| Bicego V., Di Persio F., Hurst R.C., Stratford G. |
| 5029 - THE EFFECT OF MULTI-AXIAL STRESS COMPONENT ON CREEP CRACK GROWTH RATE CONCERNING STRUCTURAL BRITTLENESS | |
| Yokobori A.T. Jr., Sugiura R., Tabuchi M., Fuji A., Adachi T., Yokobori T. |
| 5044 - NEW FRACTURE MECHANICS APPROACH TO CHARACTERIZE INTERNAL HYDROGEN EMBRITTLEMENT OF STEEL FOR FITNESS-FOR-SERVICE MODELING | |
| Al-Rumaih A.M., Gangloff R.P. |
| 5053 - INVESTIGATION OF THE DAMAGE BEHAVIOUR OF NOVEL BIAXIAL REINFORCED WEFT KNITTED COMPOSITES | |
| Hufenbach W., Böhm R., Langkamp A., Kroll L., Gude M. |
| 5060 - MODELLING OF ANISOTROPIC DAMAGE BY MICROCRACKS: TOWARDS A DISCRETE APPROACH WITHIN A STANDARD FRAMEWORK | |
| Bargellini R., Dragon A., Halm D., Waldek Bose Filho |
| 5068 - ADVANCES IN CRACK ASSESSMENT FOR PIPELINE INTEGRITY | |
| Katz D., Gao M., Limon S., Krishnamurthy R. |
| 5094 - EXPERIMENTAL AND COMPUTATIONAL POLYCRYSTAL STUDIES OF FATIGUE DAMAGE AND CRACK INITIATION | |
| Dunne F., Fielding L., Allen R., Manonukul A. |
| 5097 - FATIGUE CARCK TIP DAMAGE-BASED MODELS IN STRUCTURAL PROGNOSIS | |
| Agnew S.R., Ro Y.J., Begley M.R., Gangloff R.P. |
| 5114 - STRAIN HISTORY EFFECTS ON FRACTURE MECHANICS PARAMETERS | |
| Ernst H.A., Bravo R.E., Villasante J.A., Izquierdo A. |
| 5131 - A COMPUTATIONAL STUDY OF THE FRACTURE BEHAVIOUR OF CONCRETE IN A MODIFIED SPLIT HOPKINSON BAR TEST | |
| Pedersen R., Sluys L., Weerheijm J., Simone A., M. Tkachenko |
| 5155 - CRACK PROPAGATION IN FUNCTIONALLY GRADED MICROPOROUS THERMOVISCOPLASTIC MATERIALS | |
| Love B.M., Batra R.C. |
| 5157 - PREDICTING THE LONG-TERM FAILURE OF POLYCARBONATE: A CONSTITUTIVE APPROACH | |
| Klompen E., Engels T., Janssen R., Govaert L.E., Meijer H.E.H. |
| 5159 - DAMAGE EVOLUTION IN PLANE STRAIN DEFORMATIONS OF IMPACT LOADED SANDWICH PLATES | |
| Batra R.C., Love B.M. |
| 5248 - MECHANICAL PROPERTIES AND FRACTURE MECHANISMS OF Al2O3/POLYPROPYLENE NANOCOMPOSITES | |
| Zhao H., Li R.K.Y. |
| 5279 - FRACTURE BEHAVIOR OF BINARY BLOCK COPOLYMERS BLENDS | |
| Weidisch R., Staudinger U., Satapathy B., Lach R., Grellman W., Knoll K. |
| 5288 - INVERSE DISCONTINUITY FORMULATION OF FRACTURE | |
| Fagerström M., Larsson R. |
| 5298 - SELF-ORGANIZATION OF SCALE LEVELS OF PLASTIC FLOW IN FRACTURE MESOMECANICS | |
| Goldstein R., Panin V., Derevyagina L., Osipenko N. |
| 5301 - HIGH CYCLE FATIGUE BEHAVIOUR OF WELDED JOINTS BASED ON NOTCH STRESS INTENSITY FACTORS | |
| Atzori B., Lazzarin P., Tovo R., Yuriy Sokolkin |
| 5313 - A THERMOMECHANICAL FATIGUE CRACK INITIATION MODEL FOR DIRECTIONALLY-SOLIDIFIED NI-BASE SUPERALLOYS | |
| Gordon A.P., Shenoy M., Neu R.W. |
| 5339 - EFECT OF RETROGRESSION AND RE-AGING HEAT TREATMENT ON THE CORROSION FATIGUE CRACK GROWTH BEHAVIOR OF AA7050 ALUMINUM ALLOY | |
| Gürbüz R., Akgün N. |
| 5346 - CREEP RUPTURE OF FIBER BUNDLES | |
| Kun F., Hidalgo R.C., Herrmann H.J. |
| 5360 - CRACK PROPAGATION KINETICS OF POLYMERS AT QUASISTATIC AND MODERATE IMPACT LOADING | |
| Lach R., Seidler S., Grellmann W. |
| 5362 - PLASTICITY EFFECTS ON FATIGUE CRACK GROWTH AT HOLES | |
| McClung R.C., Gardner B.M., Lee Y.-D., McMaster F.J. |
| 5382 - MULTIPLE DELAMINATION OF LAMINATED STRUCTURES | |
| Andrews M., Massabo R., Cox B., Václav Veselý, Petr Frantík, Zbyn?k Keršner |
| 5385 - DYNAMICS AND STRUCTURE OF INTERFACIAL CRACK FRONT | |
| Måløy K.J., Toussaint R., Schmittbuhl J. |
| 5415 - THREE-DIMENSIONAL MODELING OF STRONG DISCONTINUITIES IN ROCK | |
| Regueiro R.A., Oscar Borla |
| 5418 - EQUIVALENT MATERIAL MODELING FOR COMPOSITE OF DAMAGED INCLUSIONS WITH SPRING LAYER | |
| Nakagaki M., Matsumoto R., Nakamachi Y., Jan Scholten |
| 5425 - APPLICATION OF MATERIAL FORCES IN DEFECT MECHANICS | |
| Muller R., Gross D. |
| 5434 - A NUMERICAL APPROACH TO THE FATIGUE CRACK GROWTH THRESHOLD | |
| Michel S.A., Kieselbach R., Figliolino M. |
| 5437 - STATISTICAL MECHANICS OF INTERACTING FIBER BUNDLES | |
| Toussaint R. |
| 5438 - RATE DEPENDENT FRACTURE OF POLYMERS - APPLICABILITY AND LIMITATIONS OF FORCE BASED FRACTURE MECHANICS APPROACHES | |
| Major Z., Lang R.W. |
| 5445 - ASSESSMENT OF METHODS TO DETERMINE FRACTURE TOUGHNESS OF POLYMERS IN THE DUCTILE-TO-BRITTLE TRANSITION REGION | |
| Cocco R.G., Frontini P.M., Perez Ipiña J.E. |
| 5450 - PRELIMINARY INVESTIGATION BY SYNCHROTRON RADIATION OF CRACKS AND DEFECTS IN AA FSW SAMPLES | |
| Cosmi F., Cristofori A., Mancini L., Tovo R., Tromba G., Volpone M. |
| 5456 - SHEAR FAILURE AT A CRACK TIP UNDER SHEAR WAVE LOADING | |
| Zhang Z., Clifton R.J. |
| 5461 - CRACK CLOSURE: MECHANISMS, EXPLANATION AND PREDICTION | |
| Pippan R., Motz C. |
| 5470 - TOUGHENING MECHANISMS IN MOLLUSK SHELLS | |
| Ballarini R. |
| 5471 - EFFECTS OF VARYING MEAN STRESS AND STRESS AMPLITUDE ON THE FATIGUE OF POLYSILICON | |
| Ballarini R., Kahn H., Heuer A.H. |
| 5473 - ON A BIMODAL REPRESENTATION OF SMALL FATIGUE CRACK SCATTER | |
| Carlson R.L., Cappelli M.D., Kardomateas G. |
| 5495 - FATIGUE CRACK GROWTH IN ELASTIC-PLASTIC MATERIALS UNDER COMBINED BENDING WITH TORSION | |
| Macha E., Rozumek D., Pawliczek R. |
| 5505 - HYDROGEN DAMAGE IN THE CRACK TIP ENVIRONMENT | |
| Begley M.R., Agnew S.R., Komaragiri U., Gangloff R.P. |
| 5518 - PROPERTIES AND FRACTURE OF TUNGSTEN-ALUMINA ATOMIC LAYER DEPOSITED NANOLAMINATES | |
| Jungk J.M., Moody N.R., Mayer T.M., Wind R.A., George S.M., Gerberich W.W. |
| 5520 - ACTION OF WATER COOLED COPPER END CHILLS DURING SOLIDIFICATION ON FRACTURE BEHAVIOR OF ALUMINUM ALLOY/QUARTZ MMCs | |
| Hemanth J., Zinoviy Nazarchuk, Denys Rudavskyy, Oleg Sergiyenko |
| 5530 - ON VARIATIONAL FORMULATIONS FOR THE TRANSITION FROM ELASTO-DAMAGING TO ELASTO-FRACTURING BEHAVIOR | |
| Benvenuti E., Tralli A., E. Tikhomirova, A. Rybnikov |
| 5531 - MECHANISTIC INSIGHTS ON ENVIRONMENTAL DEGRADATION FROM NANOMETER-SCALE CRACK TIP MEASUREMENTS | |
| Bruemmer S. R., Thomas L.E. |
| 5535 - APPLICATION OF PATH-INDEPENDENT INTEGRAL ANALYSIS TO FRACTURE OF MAGNETO-ELECTROELASTIC SOLIDS | |
| Tian W.Y., Rajapakse R.K.N.D. |
| 5575 - UNIFIED FRAMEWORK FOR DAMAGE AND FATIGUE OF METALS, CONCRETE AND ELASTOMERS | |
| Desmorat R. |
| 5576 - PARTICLE SIZE AND FILLER-MATRIX ADHESION EFFECTS ON DYNAMIC FRACTURE OF GLASS-FILLED EPOXY COMPOSITES | |
| Tippur H., Kitey R. |
| 5618 - THE USE OF CONTROLLED SHOT PEENING TO IMPROVE THE FRETTING FATIGUE BEHAVIOUR OF FLAT ON FLAT ALUMINIUM CONTACT | |
| Pantelakis S., Rodopoulos A., Brown M.W., Gardiner S., Edwards R. |
| 5622 - ABSORPTION OF HYDROGEN BY HIGH-STRENGTH STEEL AT A CHEMICAL AND ELECTROCHEMICAL NICKEL PLATING AND VARIATIONS OF ITS FATIGUE STRENGTH | |
| Slezhkin V.A., Beloglazov S.M., Neville Rieger, Ronald Salzman, David Gandy |
| 5625 - FATIGUE, FRACTURE TOUGHNESS AND TENSILE PROPERTIES IN PARTICULATE ALUMINIUM METAL MATRIX COMPOSITES | |
| Singh V., Prasad R.C. |
| 5626 - FATIGUE OF BRIDGING CERAMICS: UNDERSTANDING CRACK SIZE EFFECTS | |
| Kruzic J. J., Cannon R.M., Ritchie R.O. |
| 5627 - THERMAL LAP SHEAR TESTS ON MEMS INTERCONNECTED SOLDER | |
| Vogel J., Faust W., Dudek R., Michel B., Dost M. |
| 5628 - ACCELERATED DEBONDING AND CRACKING IN THIN-FILM STRUCTURES: CHEMICAL REACTION RATE AND LOADING EFFECTS | |
| Dauskardt R.H., Guyer E.P. |
| 5651 - FRACTURE CHARACTERISTICS OF TWO CARBON FIBRE REINFORCED CERAMICS | |
| Dusza J., Liedke V., Semerad E., Weiss R. |
| 5684 - MECHANISMS OF FATIGUE DAMAGE FORMATION AND EVOLUTION IN Zr-BASED BULK METALLIC GLASS | |
| Hess P.A., Menzel B., Dauskardt R.H. |
| 5685 - ON THE ENERGY RELEASE RATE OF FINITE CRACKED BODIES | |
| Chao C.K., Chang R.C. |
| 5690 - MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF AL 6056 FRICTION STIR WELDED JOINTS | |
| Cavaliere P., Nobile R, Panella F.W., Squillace A. |
| 5691 - SIGNIFICANCE OF DWT TESTING FOR LINE PIPE SAFETY | |
| Erdelen-Peppler M., Gehrmann R., Junker G., Knauf G., Liessem A. |
| 5695 - SIZE EFFECT ON FRACTURE IN THIN COPPER/TANTALUM BILAYERS ON POLYIMIDE SUBSTRATES | |
| Spolenak R., Gruber P., Arzt E. |
| 5698 - TIME VS. CYCLE DEPENDENCE OF EX VIVO FATIGUE IN HUMAN CORTICAL BONE | |
| Ritchie R.O., Nalla R.K., Kruzic J.J., Kinney J.H. |
| 5701 - SEISMIC ENERGY RADIATION FROM DYNAMIC FAULTING | |
| Madariaga R. |
| 5712 - LOCAL SECOND GRADIENT MODELS AND DAMAGE MECHANICS: APPLICATION TO CONCRETE | |
| Kotronis P., Chambon R., Mazars J., Collin F. |
| 5738 - HYDROGEN DECREASED DUCTILITY OF A U-6%NB ALLOY | |
| Teter D.F., Hackenberg R.E., Mauro M.E., Dickerson P.O., McCabe R. |
| 5753 - CRACK GROWTH CHARACTERISTICS AND DAMAGE IN 12Cr STEEL UNDER HIGH TEMPERATURE CREEP AND CREEP-FATIGUE CONDITIONS | |
| Yokota O., Sugiura R., Yoda M., Yokobori A.T. Jr., Yokobori T. |