General Papers
| A limit equilibrium of quasibrittle materials with thin inclusions | |
| M. M. Stadnyk, I. Y. Horbachevskyy |
| A method for acceleration of decreasing *K FCGR tests | |
| S. Tarafder, S. Sivaprasad, M. Tarafder, K. K. Ray |
| A new experimental technique for determining the fracture energy of wood under mode II loading conditions | |
| K. Fruhmann, E.K. Tschegg, S.E. Stanzl-Tschegg |
| A new nonlocal fracture criterion | |
| S. V. Suknyov |
| A possible explanation of size effect in fatigue strength of metals | |
| A. Carpinteri, A. Landini, A. Spagnoli |
| A simple method for topology optimization using orthotropic material properties | |
| Z. Wu, Y. Sogabe, Y. Arimitsu |
| A stiffness release (finite element) model for high speed crack propagation analysis | |
| N. N. Kishore, M. Siva Reddy, G. V. Deskmukh |
| A strain based approach to assessing creep crack initiation and crack growth | |
| D. J. Smith, A. J. Fookes, D. W. Dean |
| A study of fatigue cracking behaviour dependent on the distance between two hole defects | |
| S.-H. Song, J.-S. Bae, A. Kim |
| A study of fracture from the viewpoint of dilatation | |
| Y. Arimitsu, Y. Sogabe, Z. Wu |
| A toughness study of the weld heat affected zone of a modified 9Cr-1Mo steel | |
| A. Moitra, K. Laha, R. P. Sreenivasan, S. L. Mannan |
| Advanced cohesive zone models for fracture simulation | |
| T. Siegmund |
| Aircraft structural integrity: the impact of corrosion | |
| G. Clark, P. K. Sharp, T. Mills |
| Alternative methods for deriving and fitting J-R curves: How they affect structural integrity assessment | |
| J. R. Tarpani, A. A. Colafemea, W. W Bose Filho, D. Spinelli |
| An elasto-plastic damage model for cementitious materials | |
| D. Addessi, S. Marfia, E. Sacco |
| Analysis of environmental effects using the unified approach for fatigue crack growth | |
| K. Sadananda, R. L. Holtz, A. K. Vasudevan |
| Analysis of micromechanical tensile damage process for brittle ceramic materials using FEM | |
| T. Niezgoda, J. Malachowski, Z. Smalko |
| Analysis of subsonic interfacial fracture using strain gages in an isotropic-orthotropic biomaterial | |
| V. Ricci, K. H. Lee, A. Shukla, V. Chalivendra |
| Analysis of the physico-chemical mechanisms responsible for hydrogen attack | |
| S. M. Schlogl, E. Van der Giessen |
| Anti-plane shear crack growth in piezoceramics: change of electric field and displacement direction | |
| B. Liu, S. Y. Cheng, Z. F. Song, W. F. Ren |
| Atomic scale investigation of metal/ceramic interface fracture by super high-resolution electron microscopy | |
| H. Ichinose, H. Saito |
| Atomic-force microscopy on corrosion pits and crack initiation in fatigue metals | |
| Y. Nakai, Y. Shimizu, S. Fujiwara, T. Ogawa |
| Betonite pellets mechanical properties variation caused by oily waste inclusion | |
| E. A. de Carvalho, G. P. Sousa, J. N. F. Holanda |
| Can stretch zone measurements provide a good estimate of fracture toughness | |
| S. Sivaprasad, S. Tarafder, V. R. Ranganath, S. K. Das, K. K Ray |
| Characterisation of fatigue crack formation in mechanically surface treated austenitic stainless steel | |
| I. Altenberger, B. Scholtes, U. Noster, R. O. Ritchie |
| Co-planar crack interaction in cleaved MICA | |
| J.C. Hill, S.J. Bennison, P.A. Klein, A. Jagota, S. Saigal |
| Cohesive model for thin film/substrate interfacial cleavage fracture | |
| Y. Shouwen, L. Ran |
| Coincindence doppler broadening positron annihilation spectroscopy in defects in iron and silicon | |
| M. Fujinami, T. Sawada, T. Akahane |
| Compressive fracture of orthotropic laminates containing open holes due to fibre micro-instability | |
| C. Soutis |
| Computational modelling of cracks in viscoplastic media | |
| G. N. Wells, L. J. Sluys, R. de Borst |
| Coupling of asymptotic solutions with finite elements at interface configurations in piezoelectric composites | |
| M. Scherzer, M. Kuna |
| Crack front waves in dynamic fracture | |
| J. Fineberg, E. Sharon |
| Crack growth behaviour of Ni-Base High Temperature Alloys at 500 to 1000°C | |
| F. Schubert, H. J. Penkalla, P. J. Ennis, L. Singheiser |
| Crack growth in a Ti6A14V alloy under multiaxial fatigue | |
| F. S. Silva, A. C. M. Pinho |
| Crack growth resistance of metal foams | |
| I. Schmidt, N. A. Fleck |
| Crack initiation behavior of piezoelectric ceramic: electro-mechanical interaction | |
| B. Liu, Z. F. Song, G. C. Sih |
| Crack stability in uniaxial tensile tests | |
| C. Shi, J. G. M. van Mier |
| Crack Tip Deformation and Toughness in Polypropylenes | |
| S. Seidler, T. Koch, I. Kotter, W. Grellmann |
| Creep crack growth parameters in directionally solidified superalloys | |
| A. Saxena, B. Gardner, J. Qu |
| Creep damage analysis of short cracks using a narrow notch specimen made from a Ni-base superaloy at 700°C | |
| T. H. Hyde, A. A. Becker, W. Sun |
| Critical energy release rate of a bimaterial asymmetric double cantilever beam (ADCB) with an adhesive layer | |
| N. B Kuipers, A. Bakker, G. E. Schoolenberg, M. Janssen |
| Cross-sectional nanoindentation: a new technique to measure thin film interfacial adhesion | |
| B. Sun, T. Scherban, D. Pantuso, J. M. Sanchez, R. Elizalde, J. M. Martinez-Esnaola |
| Damage and fracture in creep of magnesium alloy-based composites | |
| V. Sklenicka, M. Pahutova, M. Svoboda, K. Kucharova, I. Podstranska |
| Damage assessment for concrete-structures using AE/UT technique | |
| K. Iwaki, T. Shiotani, M. Ohtsu |
| Damage fracture and fatigue for the piezoelectric and ferroelectric medium | |
| Y. Shouwen, W. Yang |
| Damage initiation and evolution in a heterogeneous material | |
| C. Liu, M. G. Stout, B. W. Asay |
| Damage of nickel base superalloy subjected to low cycle fatigue with hold periods | |
| J. Zrník, J. Semenak, V. Vrchovinsky |
| Deformation of [001] NiTi single crystals | |
| H. Sehitoglu, X. Zhang, J. Jun, I. Karaman, K. Gall, Y. Chumlyakov |
| Description of multiple cracking in uv-degraded stressed polyethylene using percolation approach | |
| I. Skrypnyk, N. Bilyk, J. Spoormaker |
| Deterioration properties of damaged concrete due to freezing and thawing | |
| H. Mihashi, M. Saichi |
| Determination of fracture toughness of rock under in-situ conditions using semi-circular specimen | |
| M. D. Kuruppu, M. Seto |
| Detrimental effect of hydrogen on the fracture strength of single-walled carbon nanotubes | |
| S. Q. Shi, L. G. Zhou |
| Discontinous crack growth of polymide resin, effect of molecular weight | |
| M. Notomi, K. Kishimoto, T. Shibuya, H. Inaba, A. Morita |
| Ductile fracture analysis of structural steel by application of micromechanical modelling | |
| M. Rakin, Z. Cvijovic, A. Sedmak, M. Zrillic, Z. Putic |
| Ductile rupture of aluminium sheets | |
| J. Brocks, J. Besson, O. Chabanet, D. Steglich |
| Dynamic delaminatin in through-thickness reinforced DCB specimens | |
| N. Sridhar, B. N. Cox, I. J. Beyerlein, R. Masa |
| Dynamic fracture behaviour of composites | |
| S. Ravi, N. G. R. Iyengar, N. N. Kishore, A. Shu |
| Dynamic fracture surface energy values and frustrated micro-branches during RCP in an impact modified polymer | |
| C. Fond, R. Schirrer |
| Dynamic fracture testing using charpy instrumented pendulum | |
| Z. Radakovic, D. Radakovic, G. B. Lenkey, V. Grabulov, A. Sedmak |
| Dynamic JR curves from instrumented impact test of unprecracked charpy V-notch specimens of austenitic stainless steel | |
| P. R. Sreenivasan, S. K. Ray, S. L. Mannan |
| Dynamics of inter-facial crack front propagation | |
| K. J. Maloy, J. Schmittbuhl, A. Delaplace, J. J. Ramasco |
| Effect of cracking on serviceability of fibrous concrete | |
| T. Ayano, M. A. afa, K. Sakata |
| Effect of electrical field reversal on crack growth behaviour in poled piezoelectric ceramics | |
| G. C. Sih |
| Effect of halogen freeing on fatigue properties of electronics printed plastic board | |
| M. Nakamura, H. Suzuki, T. Matsumoto, T. Ohtsuki |
| Effect of impact loading on tensile strength of concretes | |
| M. Daimaruya, H. Kobayashi, H. Shizawa, R. A. Siriegar, Y. Ishihata |
| Effect of predeformation on fatigue life - experimental characterisation and description by means of a new parameter | |
| H.-J. Christ, K. Schoeler |
| Effect of reinforcing particle morphology on the tensile response of 6061/SiC/25p discontinuously-reinforced aluminum | |
| J. E. Spowart, D. B. Miracle |
| Effect of residual stress on fatigue strength of steel modified by WPC process | |
| D. Yonekura, H. Akebono, J. Komotori, M. Shimizu, H. Shimizu |
| Effects of noble gas environments on fatigue crack growth in titanium alloys | |
| M. Shimojo, R. Kusama, M. Otsubo, Y. Higo |
| Environmental effects on fracture and sub-critical crack growth evaluation for life time prediction | |
| T. Shoji |
| Estimation of dynamic stress intensity factors for beams and cylindrical specimens | |
| S. Y. Kovchyk, V. M. Boyko, I. V. Khodan, I. D. Skrypnyk |
| Evaluation of fracture toughness of ceramics/metal functionally graded material by three-point bending test | |
| K. Tohgo, T. Suzuki, H. Araki, H. Ishii |
| Evaluation of stress intensity factors of spot welded joints using meshless method | |
| K. Shimizu, N. Tomioka, A. Okabe |
| Evaluation of thermal and elastic properties for solid surfaces using transient reflecting grating method | |
| K. Katayama, Q. Shen, A. Harata, T. Sawada |
| Evolution of fracture of steels at a temperature of 4.2 k under the action of electric current pulses | |
| V. A. Strizhalo, L. S. Novogrudsky |
| Experimental failure modes and finite element analysis of lightweight ceramic ablator materials under iosipescu shear testing | |
| S. Nagasawa, K. E. Parmenter, K. Shuman, F. Milstein |
| Experimental-numerical analysis of mechanisms of damage initiation in tool steels | |
| L. Mishnaevsky Jr, N. Lippmann, S. Schmauder |
| Fatigue and fracture of Cu-SiO2 alloys at elevated temperatures | |
| H. Miura, T. Sakai |
| Fatigue behaviour of a laser beam welded Ni-base superalloy during high temperature cyclic deformation | |
| T. Spirowski, A. Fischer, R. Saggau, H. Pries, H. Wohlfahrt |
| Fatigue behaviour of a micro-sized austenitic stainless steel with fine grains | |
| G. P. Zhang, K. Takashima, M. Shimojo, Y. Higo |
| Fatigue behaviour of a pultruded glass-reinforced polymer-matrix composite material | |
| L. B. Godefroid, W. A. Morais, G. P. Silva, J. A. Martins |
| Fatigue crack growth behaviour of micro-sized specimens prepared from amorphous alloy thin films | |
| K. Takashima, Y. Higo, M. V. Swain |
| Fatigue crack propagation of dissimilar metal welds | |
| C. S. Kusko, J. N. DuPont, A. R. Marder, S. Spooner |
| Fatigue life calculation of fillet-rolled components at axial cyclic loading | |
| M. Richter, T. Seeger |
| Fatigue life extension of austenitic stainless steel using nano-sized-martensites formed at intersections of dislocations | |
| T. Inamura, M. Shimojo, K. Takashima, Y. Higo |
| Fatigue reliability evaluation and fracture analysis at elevated temperature related to safety guarantee of industrial use Pt alloy | |
| S. Hitomi, H. Suzuki, M. Nakamura |
| FEM simulation of mixed mode crack propagation induced by hydraulic fracturing | |
| K. Sato, M. Itaoka, T. Hashida |
| Flow and fracture of free-standing metallic thin films and multilayers | |
| F. Spaepen, H. Huang |
| Formal considerations about fracture: nucleation and growth | |
| J. P. Sethna |
| Formation of TiO2* thin film by ion-beam-mixing method and its application as the corrosion protecting film | |
| Y. Kimura, H. Saito |
| Fractal and fracture mechanics analyses on fatigue fracture surfaces of metallic materials | |
| T. Sakai, T. Sakai, A. Ueno |
| Fractography of S.E.N. soft soldered composite laminates made from 0.8% carbon manganese steel under plane strain conditions | |
| M. R. Sabayo |
| Fracture and fatigue behaviour of toughened DRA, AI-Be, and bulk metallic glass composites | |
| J. J. Lewandowski, J. Larose, S. Solv'yev |
| Fracture behaviour of a SiCw/6061Al alloy composite under cyclic loading | |
| L. Wang, T. Kobayashi, Z. M. Sun, H. Toda |
| Fracture criterion for piezoelectric materials with defects based on energy density theory | |
| A. K. Soh, D. Fang, K. L. Lee |
| Fracture evaluation of in-situ sensors for high temperature applications | |
| S. C. Forth, A. Stroselsky |
| Fracture in chromium: an attempt to improve ductility | |
| R. Wadsack, R. Pippan, B. Schedler |
| Fracture in metakaolin concrete under different loading conditions | |
| B. B. Sabir, S. Wild |
| Fracture initiation and crack growth - cohesive zone modeling and stereoscopic measurements | |
| C. R. Chen, O. Kolednik, F. D. Fischer, I. Scheider, T. Siegmund, A. Tatschl |
| Fracture of thermal sprayed nanostructured coatings | |
| M. Gell, L. Shaw, E. Jordan, H. Luo, D. Goberman |
| Fracture process of PM Ti6A14V at 20K in presence of impurities | |
| L. Briottet, N. Scheer, D. Guichard |
| Fracture toughness and failure mechanism of polymer-introduced porous Hap composites | |
| H. Suemasu, T. Wada, M. Aizawa, K. Gozu, A. Nozue, K. Itatani |
| Fracture toughness tests for micro-sized specimens | |
| K. Takashima, Y. Ichikawa, Y. Higo, M. V. Swa |
| Growth of fatigue cracks from cold expanded holes | |
| M. J. Pavier, A.A. Garcia-Granada, V. D. Lacarac, D. J. Smith |
| Hydrogen effects on the localization of plastic deformation at a crack tip: implications for fracture | |
| P. Sofronis, Y. Liang |
| In vitro bioactive functional and fracture strength of biomaterial in a simulated body fluid | |
| N. Hisamori, A. Nozue, M. Aizawa, H. Suemasu |
| In-situ characterization of matrix response to fiber fractures | |
| J.C. Hanan, I.J. Beyerlein, E. Ustundag, G.A. Swift, B. Clausen, D.W. Brown |
| Inducing 'pure' mode II shear failures in laminated composites | |
| S. R. Short, C. P. Sastry |
| Influence of annealing process on ultrafast carrier dynamics for an ion-implanted silicon surface | |
| H. Donen, Y. Inagaki, K. Katayama, M. Fujinami, T. Sawada |
| Influence of loading changes on the fatigue crack growth | |
| M. Sander, H. A. Richard |
| Influence of phase transformation on subcritical crack growth in numerical modelling of a ceramic composite | |
| T. Niezgoda, W. Szymczyk, J. Zurek |
| Influence of residual stress on ductile crack initiation and growth in dissimilar metal weld joints | |
| A. Sherry, D. Lidbury, D. Beardsmore |
| Inhomogeneity effects on crack growth | |
| N. K. Simha, F. D. Fischer, O. Kolednik |
| Local fracture properties in MMC's | |
| O. Kolednik, I. Sabirov |
| Long term prediction of fatigue life for FRP joint systems | |
| Y. Miyano, M. Nakada, N. Sekine, S. W. Tsai |
| Materials with cracks and pores: micromechanics, cross-property correlations and applications | |
| M. Kachanov, I. Sevostianov |
| Mechanical behavior and electrical resistance change in carbon particle dispersed plastic composite | |
| D.-Y. Song, Y. Hirata, N. Takeda |
| Mechanical properties of tungsten fiber reinforced Ti-6A1-4V alloy by HIP fabrication | |
| S. Y. Son, S. Nishida, N. Hattori, K. Hayashi, K. Nakano |
| Mechnical behaviour and electrical resistance change in carbon particle dispersed plastic composite | |
| D.-Y. Song, Y. Hirata, N. Takeda |
| Micromechanical modeling of hydrogen-induced fracture modes in IN903 | |
| B. P. Somerday, N. R. Moody |
| Micromechanics in graphite fiber/epoxy composites during creep | |
| C. H. Zhou, L .S. Schadler, I. J. Beyerlein |
| Micromechanisms of fatigue in polysilicon MEMS structures | |
| S. Allameh, P. Shrotriya, B. Gally, S. Brown, W. O. Soboyejo |
| Microstructural features of short crack growth in a Beta-titanium Alloy | |
| U. Krupp, W. Floer, H.-J. Christ, A. Schick, C.-P. Fritzen |
| Mixed mode I/II fracture toughness of mild steel | |
| M. Srinivas, S. V. Kamat, P. Rama Rao |
| Mode-I delamination characterisation of cross-ply fibre-metal laminates | |
| J. Laliberte, P. V. Straznicky, C. Poon |
| Model of mechanics for fiber reinforced Ti alloy matrix composites under thermomechanical loading | |
| L.-S. Niu, Q.-Y. Hu, H.-J. Shi, C. Robin |
| Modeling of crack-opening stress levels under different service loading spectra and stress levels for a 1045 annealed steel | |
| M. Khalil, T. H. Topper, K. Soudki |
| Modelling crack propagation: a phase field approach | |
| L. O. Eastgate, J. P. Sethna, M. Rauscher, C. R. Myers, C. S. Chen |
| Modelling of size effects on fracture in the brittle-to-ductile transition regime | |
| A. H. Sherry, D. P. Lidbury, D. C. Connors, A. R. Dowling |
| Modelling the processes of micro-defects nucleation in thin-film interconnects of integrated circuits at electromigration | |
| R. V. Goldstein, M. E. Sarychev, D. B. Shirabaikin, A. S. Vladimirov, Y. V. Zhitnikov |
| Nanoindentation and fracture analysis of thin solid films | |
| K. Sriram, R. Narasimhan, S. K. Biswas |
| Nano-indentation fracture with a corner cube indenter | |
| J. S. Field, R. Dukino, N. Iwashita, M. V. Swain |
| Near tip behaviour in a particulate composite material under constant strain rates including temperature and thickness effects | |
| C. T. Liu, C. W. Smith |
| Notch strength of spheroidal graphite cast iron under tension loading | |
| K. Zhao, J. Sun, J. Yan, X. Zheng |
| Numerical modelling of ceramic materials microstructures for residual stresses concentrations | |
| T. Niezgoda, W. Szymczyk, J. Malachowski, M. Woropay |
| Numerical representation of plastic J-Integral variation along the crack front of semi-elliptical surface crack under uniform tension | |
| M. H. Sharobeam, R. Stockton |
| Numerical simulation of crack tip fields and toughening mechanisms in ternary polymer blends | |
| T. Seelig, E. van der Giessen, D. Gross |
| On the ductile fracture in cylindrical tube bulging under impulsive loading | |
| Y. Sato, K. Kono, H. Ogawa |
| On the fatigue crack tip driving force: Role of crack tip plasticity | |
| G. Glinka, R. L. Holtz, K. Sadananda, A. K. Vasudev |
| Oxygen enhanced crack growth in nickel-base superalloys under sustained and fatigue loading | |
| R. Wei, Z.-F. Huang, C. Miller, G. W. Simmon |
| Particulate toughening of unsaturated polyester: effect of particle size and volume fraction | |
| R. P. Singh |
| Prediction for dry sliding wear in P/M alloy: A back-propogation ANN approach | |
| M. E. Haque, K. V. Sudhakar |
| Predictive model for the steady-state failure of adhesively-bonded joints with extensive plastic yielding | |
| T. Ferracin, T. Pardoen, F. Delannay, C. M. Landis, J. Y. Sener |
| Real-time speckle interferogram analysis and its application to sub-surface delamination crack detection in carbon fibre composites | |
| J. M. Huntley, C. R. Coggrave, Y. Shen |
| Recent advances of photo-thermal spectroscopy | |
| T. Sawada, K . atayama |
| Relationship between Rockwell C hardness and inelastic material constants | |
| A. Hirano, M. Sakane, N. Hamada |
| Residual strength analyses of single - and multiple-stiffened wide panels | |
| B. R. Seshadri, J. C. Newman |
| Resonance and crack propagation in prestressed orthotropic materials containing an inclined crack | |
| E. M. Craciun, E. Soos |
| Rubber-particle-size dependent strain rate effects on mechanical properties and de formation behaviour of high-impact polystyrene | |
| T. Kuboki, K. Takahashi, P. Y. Ben Jar, T. Shinmu |
| Self-Healing Polymer Composites | |
| S. White, E. N. Brown, M. R. Kessler, S. Sriram |
| Short fatigue crack growth under multiaxial nonproportional loading | |
| J. Hoffmeyer, R. Doring, T. Seeger, M. Vormwald |
| Simulation of crack propagation in heterogeneous brittle solids: scaling parameters | |
| V. V. Silberschmidt |
| Simulation of fatigue crack propagation processes in arbitrary three-dimensional structures with the program system | |
| M. Fulland, M. Schollman, H. A. Richard |
| Simulation of fatigue crack propagation rates in smooth bending specimens, from the onset of loading, using the two-term model | |
| H. Saguy, M. P. Weiss, D. Rittel |
| Size effect of corrosion fatigue properties in micro-sized 304 austenitic stainless steel specimens | |
| Y. Mizutani, M. Shimojo, K. Takashima, Y. Higo |
| Small fatigue crack initiation and growth behavior of Fe-0.5Ni-1Mo sintered steel | |
| A. Sugeta, M. Jono, Y. Uematsu |
| SQUID damage monitoring for austenitic stainless steel | |
| T. Suzuki, K. Hirano, T. Terawoto |
| Static and dynamic fracture properties of high strength steel chain materials | |
| D. M. Shuter, J. T. Dutton, W. Geary |
| Statistics of acoustic emission in paper fracture | |
| L. I. Salminen, M. J. Alava, K. J. Niskanen |
| Statistics of chemical and mechanical fractures of corroded solids | |
| A. Baldassarri, A. Gabrielli, B. Sapoval |
| Stereoscopic fracture analysis by SEM using stero matching and secondary electron integrating signals | |
| J. Jiang, S. Sakai |
| Stochastic analysis of fatigue crack growth | |
| C. Proppe, G.I. Schueller |
| Strain energy density as the link between global and local approach to fracture | |
| H. J. Schindler |
| Stress corrosion crack growth behaviour of austenitic stainless steels in hot concentrated chloride solution | |
| H. Shaikh, H. S. Khatak, P. Rodriguez |
| Stress corrosion cracking mechanism on the basis of the interaction model of dislocation and hydrogen around a crack tip | |
| A. T. Yokobori, J. C. Ha, T. Shoji, S. Taketomi, G. F. Li |
| Studies on deformation and fracture behaviour of welded plate for a super steel | |
| F. Tian, Y. Shi |
| Study on propagation law of surface fatigue crack at notch root in low cycle fatigue under in-plane bending | |
| K. Shingai, Y. Yoshi, D. Fukui |
| Subcase crack propagation threshold and microhardness profile influence in rolling contact fatigue of carburised components | |
| G. Donzella, A. Mazzu, L. Solazzi |
| Surface and interface characterization of ferritic stainless steel by 57Fe CEMS | |
| K. Nomura, T. Terai, T. Sawada |
| Temperature dependence of fracture toughness in a micro-sized Ni-P amorphous alloy | |
| R. Tarumi, M. Shimojo, K. Takashima, Y. Higo |
| Tensile and fatigue fracture of discontinuously reinforced aluminum alloys (DRA) | |
| N. Chawla, J. J. Williams, G. Piotrowski, R. Saha |
| Tensile and low cycle fatigue standard testing for solders - JSMS recommendation | |
| M. Sakane, H. Nose, M. Kitano, H. Takahashi, M. Mukai, Y. Tsuka |
| The fatigue damage of construction materials | |
| S. Shamirzaev, S. Ganihanov, G. Shamirzaeva |
| The fracture of geopolymers | |
| J. F. Silva, C. Thaumaturgo |
| The high temperature fatigue of a nickel-base superalloy: the influence of waveform variables | |
| D. M. Knowles, D. K. Skelton |
| The influence of dynamic testing on the J - R resistance curve behavior of medium density polyethylene | |
| J. T. Dutton, D. M. Shuter, W. Geary |
| The mechanical behaviour and fracture of thin wall iron under quasi-static and dynamic loading conditions | |
| K. K. Schrems, J. A. Hawk, O. N. Dogan |
| The quasi-static fracture behavior of 7034 aluminum alloy reinforced with Sic particulates | |
| T. S. Srivatsan, M. Al Hajri |
| The role of constraint in mixed mode I and II ductile fracture | |
| T. Swankie, D. J. Smith |
| The role of deformation twins in a ductile to brittle transition and brittle fracture of ferritic steels | |
| T. Smida, J. Bosansky |
| Toughening of nano-composite ceramics | |
| D.-N. Fang, X. Dong, A. Soh |
| Ultra high temperature creep behavior for in-situ single crystal Al203/YAG oxide ceramic eutectic composites | |
| Y. Harada, T. Suzuki, K. Hirano |
| Universal bridging laws for cracks in creeping media | |
| B. Cox, N. Sridhar |
| Use of atomic force microscopy in assessing surface damage due to fatigue | |
| L. Cretegny, A. Saxena |
| Use of surface-treatment life extension methods for aircraft components | |
| Q. Liu, S.A. Barter, P. Baburamani, P. K. Sharp, G. Clark |
| Verification of an experimental method to measure the stress-elongation law for an adhesive layer using a DCB-specimen | |
| U. Stigh, T. Andersson |