General Papers
| Evidence of piezonuclear fission reactions: Neutron emissions, microchemical analysis, geological transformations | |
| Alberto Carpinteri, Giuseppe Lacidogna, Amedeo Manuello |
| Stand and preliminary testing results on disc-shape hardwood specimens obtained with video image correlation method | |
| Botond Gálfi, János Száva, Lajos Borbás, József Szalai, Katalin Harangus |
| Fracture mechanics analyses of the slip-side joggle regions of wing-leading edge panels | |
| Ivatury S. Raju, Norman F. Knight, Jr., Kyongchan Song, Dawn R. Phillips |
| Damage tolerance analysis of aircraft reinforced panels | |
| F. Carta, A. Pirondi |
| Damage analysis of composites by means of thermography | |
| F. Libonati |
| Hybrid thermographic-FEA method for evaluation of the plastic strains in the vicinity of the crack in loaded specimen | |
| M. Žárský, J. Valach |
| Mode III stable crack propagation of specimens containg shallow micronotches and submitted to out phase multiaxial loading | |
| G. Tarantino |
| Fatigue crack growth of a gamma titanium aluminide alloy | |
| L. Patriarca |
| Fatigue behavior of aluminum foam sandwich panels | |
| C. Casavola, F. Renzoni |
| Crack propagation in micro-chevron-test samples of direct bonded wafers | |
| Klaus Vogel, Alexey Shaporin, Dirk Wuensch, Detlef Billep |
| Micromodel for failure analysis of textile composites | |
| R. Zem?ík, K. Kunc, T. Kroupa, R. Kottner, P. Janda |
| Degraded and non-degraded mooring ropes jackets: a comparative study of wearing behavior | |
| B. P. Lucas, P. P. Lucas, F. E. G. Chimisso |
| Yarn-on-yarn abrasion behavior for polyester, with and without marine finish, used in offshore mooring ropes | |
| S. S. Soares, V. Fortuna, F. E. G. Chimisso |
| Experimental study of friction in aluminium bolted joints | |
| D. Croccolo, A. Freddi, M. De Agostinis, N. Vincenzi |
| Nonlinear modeling and experimental evaluation of fluid-filled soft pads for robotic hands | PDF () |
| Giovanni Berselli, Gabriele Vassura |
| Geometrical optimization for notches based on multi axial fatigue criterion | PDF () |
| R. Ghelichi |
| Material and manufacturing issues of a laser ranged satellite | PDF () |
| C. Vendittozzi, F. Felli, A. Paolozzi, I. Ciufolini |
| Method development for the reliability testing of printed circuit boards under dynamic loads | PDF () |
| P. Fuchs, Z. Major |
| Design and experimental characterization of a 350 W high temperature PEM fuel cell stack | PDF () |
| Nicola Zuliani, Robert Radu, Rodolfo Taccani |
| Setting of on board noise sources in numerical simulation of airborne outdoor ship noise | PDF () |
| Lorenzo Moro |
| Creep comparative behavior of HMPE (high modulus polyethylene) multifilaments when submitted to changing conditions of temperature and load | PDF () |
| L. E. N. Caldeira, P. P. Lucas, F. E. G. Chimisso |
| The AISI H11 creep-fatigue behaviour: an innovative experimental design | PDF () |
| B. Reggiani, L. Donati, L. Tomesani |
| Nanocrystalline cobalt-phosphorous alloy plating for replacement of hard chromium | PDF () |
| Katarzyna Rymer, Andrzej Przywóski |
| Mechanical characterization of hybrid welded titanium joints | PDF () |
| C. Casavola, V. Giordano, C. Pappalettere |
| Material law for numerical analysis of rapid prototype products | PDF () |
| Ficzere Péter, Borbás Lajos |
| The use of thermoelasticity and photoelasticity to investigate the mechanical properties of polymeric materials | PDF () |
| A. Sciuccati |
| Determination of the true stress-strain curve for steel sheets, used in cold-drawing machining, by means of experimental tests and Yun Ling theoretical model | PDF () |
| M. Labanti, E. Monno, G. Raiteri, M. Scafe?, D. Trestini, M. Villa, R. Morsiani, A. Coglitore |
| Non-uniform residual stress fields on sintered materials | PDF () |
| C. Casavola, C. Pappalettere, F. Tursi |
| Preliminary vibration testing and analysis for automotive electronic control units | PDF () |
| S. Jovanovic, M. Milovanovic, P. Milenkovic |
| A new loading-constraining device for mechanical testing with misalignment auto-compensation | PDF () |
| G. Olmi |
| Experimental and numerical study of cemented bone-implant interface behaviour | PDF () |
| D. Kytyr, T. Doktor, O. Jirousek, P. Zla mal, D. Pokorny |
| Assessment of pore size distribution using image analysis | PDF () |
| T. Doktor, D. Kytyr, J. Valach, O. Jirousek |
| Improvements in processing technique of digital image correlation data for optical measurement of mechanical properties of materials | PDF () |
| J. Jahoda, J. Valach |
| Mechanical characterization of orthotropic materials with speckle interferometry and numerical optimization | PDF () |
| C. Barile, C. Casavola, G. Pappalettera, C. Pappalettera |
| Characterization of duplex steels through analysis of image-based on co-occurence matrix (GLCM) | PDF () |
| F. R. Renzetti, L. Zortea |
| Optical measuring system for equibiaxial test of hyperelastic rubber-like materials | PDF () |
| Attila Bojtos, Abraham Dr. Gyorgy |
| Synthetic ropes jackets made of polyester and high modulus polyethylene (HMPE): comparison of abrasion wearing behavior. | PDF () |
| M. A. Pereira, F. E. G. Chimisso |
| Three-dimensional finite element analysis of composite/metal clamped joint | PDF () |
| R. Kottner, A. Stekl, R. Zemcik |
| Low cycle fatigue behaviour and anisotropy of two steels for turbogenerator coil retaining rings and rotors | PDF () |
| G. Olmi, A. Freddi |
| Mechanical and microstructural properties of linear friction welded Al-based metal matrix composites | PDF () |
| F. Rotundo, L. Ceschini, A. Morri, G.L. Garagnani, M. Merlin |
| Acoustic emission based damage analysis of pultruded glass fiber reinforced materials | PDF () |
| D. Crivell |
| Loading force reconstruction and impact location identification for unidirectional carbon/epoxy wide beam | PDF () |
| T. Kroupa, J. Bartosek, R. Zemcik |
| Applied methodology to design a machine to test the strength of offshore synthetic mooring ropes | PDF () |
| A. Goncalves, F. E. G. Chimisso |
| How to harmonize design and production process in modern boatbulding | PDF () |
| Marco Biot, Renato Fioretti |
| The mechanical properties of fibres and yarns in different group of animals | PDF () |
| Magorzata Zak, Magdalena Kobielarz |
| Mechanical and structural properties of porcine coronary arteries | PDF () |
| M. Bartkowiak-Jowsa, R. Be?dzin?ski, P. Kuropka, M. Pfanhauser |
| Analysis of spine’s transpedicular stabilizer | PDF () |
| M. Kiel, J. Marciniak |
| Influence of the carbon dioxide emissions on selected mechanical properties of wood | PDF () |
| Jozsef Garab, Zsolt Karacsonyi, Antal Kannar |
| Injuries of previously stent stabilized left ventricular pacemaker lead during simulated lead extraction | PDF () |
| Romola Laczko?, Tibor Bala?zs, Eszter Bogna?r, Ja?nos Ginsztler |
| Strain-stress analysis of the new type composite hip joint endoprostheses | PDF () |
| A. Morawska-Chocho, B. Szaraniec, K. Migacz, J. Chopek, M. Bartkowiak-Jowsa |
| Numerical and experimental investigation on the behavior of wood-composite T joints | PDF () |
| M. Arnesano, V. Dattoma, R. Nobile, W. Panella |
| Knot strenght in fishing nets: testing a new device developed at POLICAB | PDF () |
| Vini?cius Wrubel, Cla?udio A. Kucharski, F. E. G. Chimisso |
| Analysis of short glass fibre orientation in samples from a PA6.6 GF35 car clutch pedal | PDF () |
| S. Scozzese, F. Cosmi, A. Bernasconi |
This work is licensed under a Creative Commons Attribution 3.0 License.