#### General Papers

3D model for the evaluation of multiaxial fracture behavior of reinforced concrete members | |

R. Cerioni, P. Bernardi, E. Michelini, A. Mordini |

3D shear-mode fatigue crack growth in maraging steel | |

V. Doquet, Q.H. Bui, L. Alves, G. Bertolino |

A biaxial endurance criterion developed within the linear elastic fracture mechanic frameworks | |

R. de Moura Pinho, S. Pommier, C. Mary, A. Longuet, F. Vogel |

A brief introduction to coiled springs as a power source | |

Les P. Pook |

A comparison of fatigue characteristics of structural steels measured by means of classical and miniature test samples | |

J. Volak, V. Mentl |

A damage mechanics approach to multiaxial fatigue | |

Andrea Carpinteri, R. Brighenti, A. Spagnoli, S. Vantadori |

A general multiaxial method to estimate the local elastic-plastic behavior from a purely elastic solution | |

R.J. McDonald, D.F. Socie |

A model for biaxial fatigue limits | |

A. Navarro, C. Vallellano, V. Chaves, C. Madrigal |

A multiaxial fatigue approach to estimate crack initiation and stress gradient effect in fretting | |

R. Amargier, S. Fouvry, L. Chambon, C. Schwob, C. Poupon |

A new solution for D crack extension based on linear elastic stress fields | |

Y.H. Tai, M.W. Brown, J.R. Yates |

A new test method for obtaining stable mode III crack growth under RCF condition | |

S. Beretta, S. Foletti, M.G. Tarantino, K. Valiullin |

A strain energy based criterion for multiaxial fatigue failure | |

F. Ellyin |

A strategy for the estimation of the fatigue life of notched components under random multiaxial fatigue | |

G. Cailletaud, T. Herbland, B. Melnikov, A. Musienko, S. Quilici |

A study of the stability of sharp notches in the orthotropic heterogeneous media | |

T. Profant, J. Klusak, M. Kotoul |

A study on notch fatigue based on multiaxial gradient dependent fatigue limit criterion | |

M.G. Tarantino, S. Foletti, I.V. Papadopoulos |

An alternative measure for the shear stress amplitude in critical plane based multiaxial fatigue models | |

A.P. Dantas, J.A. Araujo, E.N. Mamiya, F.C. Comes, J.L.A. Ferreria |

An energy-based fatigue model for wrought magnesium alloy under multiaxial load | |

J. Albinmousa, H. Jahed, S. Lambert |

An extrapolation method applied to a constitutive material model to recalculate creep fatigue experiments | |

P. Wang, M. Lyschik, A. Scholz, C. Berger |

Analytical and numerical modelling of the Swift effect in elastoplastic torsion | |

L. Gambirasio, P. Chiodi, E. Rizzi |

Assessment of critical defects in a PSA pressure vessel subjected to cyclical loading using BS- procedures | |

H.M. Sant’Anna, M.F. Leal |

BEM simulation and experimental test of a FML full scale aeronautic panel undergoing biaxial static and fatigue load | |

E. Armentani, V. Ascione, R. Citarella, R. Sepe |

Benefit of taking account of the yield-point phenomenon in a multiaxial constitutive model of cyclic plasticity | |

A. Zerovnik, R. Kunc, I. Prebil |

Biaxial fatigue of aluminum alloy 1100 | |

E.U. Lee, R. Taylor |

Cohesive zone model for the simulation of fatigue crack growth in adhesive joints under mixed mode I/II loading conditions | |

F. Moroni, A. Pirondi |

Current Trends in Multiaxial Fatigue Research and Assessment | |

G. Marquis |

Cyclic calculations and life estimation in thermomechanical fatigue | |

F. Azzouz, G. Cailletaud, J.L. Chaboche, E. Ostoja-Kuczynski, S. Quilici |

Damage nucleation in nuclear graphite under biaxial flexural loading | |

M. Mostafavi, J. Duff, R. Delorme, T.J. Marrow |

Effect of interference of crack faces on shear-mode threshold for small fatigue cracks in a bearing steel | |

H. Matsunaga |

Effect of non-proportional multiaxial fatigue loading on micro crack initiation and propagation of Ti-6Al-4V | |

H. Nakamura, M. Takanashi, T. Itoh, Y. Shimizu, M. Wu |

Effects of biaxial loading on inclined surface cracks behavior | |

V.N. Shlyannikov, A.V. Tumanov, S.Yu. Kislova |

Estimating the notch and mean stress effect in fatigue through the degree of multiaxiality of the local elasto-plastic stress/strain fields | |

L. Susmel, B. Atzori, G. Meneghetti, D. Taylor |

Experimental investigation of stress-strain curves in a cast TRIP steel under biaxial planar loading | |

K. Nagel, D. Kulawinski, S. Henkel, H. Biermann, P. Huebner |

Fatigue assessment of crane rail welds by local concepts | |

M. Euler, U. Kuhlmann |

Fatigue assessment of smooth metallic specimens using a simplified multiaxial criterion based on the critical plane approach | |

Andrea Carpinteri, R. Brighenti, A. Spagnoli, S. Vantadori |

Fatigue behaviour of laserbeam welded thin steel and aluminium sheets under multiaxial loading | |

J. Wiebesiek, K. Stoerzel, T. Bruder, H. Kaufmann |

Fatigue crack growth analysis of structural components – the UniGrow two-parameter driving force model | |

S. Mikheevskiy, G. Glinka, D. Algera |

Fatigue crack growth analysis under mixed mode loading | |

S. Boljanovic, S. Maksimovic |

Fatigue crack growth under flight spectrum loading with superposed fuselage cabin pressure II | |

R. Sunder |

Fatigue crack growth under flight spectrum loading with superposed fuselage cabin pressure | |

R. Sunder |

Fatigue crack propagation under torsional spectrum load of a helicopter tail rotor shaft after ballistic damage | |

A. Manes, L. Giudici, M. Giglio |

Fatigue damage accumulation in a structural steel (42CrMo4) subjected to axial/torsional bi-axial loadings | |

M. de Freitas, L. Reis, B. Li |

Fatigue damage on steel space truss systems | |

M. Dogan |

Fatigue life assessment of laserbeam welded steel tube-tube joints under constant amplitude out-of-phase combined axial loading and torsion by integration of damage differentials (IDD) | |

S.H. Stefanov, J. Wiebesiek, K. Stoerzel, T. Bruder |

Fatigue life of specimens with round and rectangular cross-sections under out-of-phase bending and torsional loading | |

D. Rozumek, Z. Marciniak, E. Macha |

Fatigue lifetime assessment of notched components under multiaxial variable amplitude loading based on a short crack growth concept | |

O. Hertel, M. Vormwald |

Fatigue strength of welded joints under multiaxial loading in terms of local strain energy density | |

F. Berto, P. Lazzarin |

Fracture of aluminium alloy 2024 under triaxial loading | |

M. Mostafavi, D.J. Smith, M.J. Pavier |

History effects in fatigue under variable amplitude laoding mode I conditions in a 316L stainless steel | |

F. Fremy, S. Pommier, E. Galenne |

IDD (integration of damage differentials): general representation | |

S.H. Stefanov |

Improvements in the algorithms for the determination of the shear stress components in critical plane class fatigue criteria | |

G. Petrucci |

Inelastic analysis of power plant components under transient thermal environment | |

K. Naumenko, A. Kutschke, Y. Kostenko, Th. Rudolf |

In-plane and out-of-plane crack-tip constraint effects under biaxial loading in plastic and creeping materials | |

V.N. Shlyannikov, N.V. Boichenko, A.M. Tartygasheva |

Interface and bulk fracture modes and strengths determined by laser-induced stress pulses | |

P. Hess, A.M. Lomonosov |

Investigation of multiaxial fatigue in the prospect of turbine disc applications: Part I – Experimental setups and results | |

V. Bonnand, J.L. Chaboche, P. Gomez, P. Kanouté, D. Pacou, P. Paulmier |

Investigation of multiaxial fatigue in the prospect of turbine disc applications: Part II – Fatigue criteria analysis and formulation of a new combined one | |

V. Bonnand, J.L. Chaboche, H. Cherouali, P. Kanouté, E. Ostoja-Kuczynski, F. Vogel |

Investigation on the shrink-fitted assemblies with a circumferential groove | |

E. Leidich, B. Bruzek, J. Vidner |

Is Miner’s law valid for asphalt mixes? | |

C. Weise, A. Blasl |

Life estimation in specimens with stress gradient: notches and fretting fatigue | |

C. Navarro, J. Vazquez, J. Dominguez |

Life estimation of a composite structural component in a multi-axial stress state | |

C. Colombo, L. Vergani |

Loading phase angle effect on multiaxial behaviour of 30CrNiMo8HH | |

M. Noban, H. Jahed, A. Ince |

Low cycle lifetime assessment of Al alloy | |

O. Kintzel, S. Khan, J. Mosler |

Low-cycle fatigue behaviour and microstructure development of copper and alpha-brass under planar biaxial loading | |

S. Henkel, J. Fischer, L. Balogh, T. Ungar, M. Hermsdorf, H. Biermann |

Material dependence of multiaxial low cycle fatigue damage under non-proportional loading | |

T. Itoh, T. Yang |

Material Influence on Multiaxial Fatigue Response | |

C.M. Sonsino |

Mean strain effect on multiaxial fatigue behavior of Ti-6Al-4V under non-proportional loading | |

M. Wu, T. Itoh, Y. Shimizu, H. Nakamura, M. Takanashi |

Mean stress effect during cyclic stress/straining of 42CrMo4 structural steel | |

L. Reis, B. Li, M. de Freitas |

Methodology for lifing turbine disk bores under multiaxial states of stress | |

M.N. Menon, P.T. Kantzos, D.J. Greving |

Mixed mode deformation in a cracked asphalt pavement subjected to traffic loading | |

M. Ameri, A. Mansourian, M.R.M. Aliha, M. Heidary Khavas, M.R. Ayatollahi |

Multiaxial deformation and fatigue behaviors under descriminating strain paths | |

N. Shamsaei, A. Fatemi, D.F. Socie |

Multiaxial fatigue assessment for notched bars under non-proportional loading using integral stress approach | |

E. Leidich, J. Vidner |

Multiaxial fatigue behavior of short-fiber reinforced thermoplastic roof bars | |

B. Klimkeit, S. Bergamo, Y. Nadot, S. Castagnet, C. Dumas |

Multiaxial fatigue criteria applied to medium speed diesel engines | |

R. Rabb, C. Loennqvist, J. Kaas |

Multiaxial fatigue damage modeling of Ti6Al4V alloy | |

A.K. Marmi, A.M. Habraken, L. Duchene |

Multiaxial fatigue life assessment of components of forged steel Ck 45 (SAE 1045) and of sintered steel Fe-1.5Cu by integration of damage differentials (IDD) | |

S.H. Stefanov, C.M. Sonsino |

Multiaxial Fatigue Modeling and Some Simple Approximations | |

A. Fatemi, N. Shamsaei |

Multiaxial fatigue resistance in thermoplastics and correlation to cyclic behavior | |

S. Castagnet, Y. Nadot, A. Berrehili, J.C. Grandidier |

Multiaxial fatigue strength assessment of components treated by surface induction hardening | |

T. Palin-Luc, D. Coupard, C. Dumas, P. Bristiel |

Multiaxial fracture model for weak fiber\matrix interface composite within the three bending fatigue test | |

K.A. Khvostunkov, A.G. Shpenev |

Multiaxial HCF and LCF constraints in topology optimization | |

M. Mrzyglod |

Multiaxial study of notched component of Sn-3.5Ag solder in creep-fatigue | |

M. Nozaki, S. Zhang, M. Sakane, K. Kobayashi |

Notch Effect on Multiaxial Low Cycle Fatigue | |

M. Sakane, S. Zhang, K. TaeJoon |

Notch effect on torsional fatigue of austenitic stainless steel | |

C. Ohkawa, I. Ohkawa |

Notch optimization under multiaxial loading | |

M. Guagliano, A. Bernasconi, R. Ghelichi |

Numerical modelling of fatigue damage in gears tooth root | |

M. Franulovic, R. Basan, R. Kunc, I. Prebil |

On determination of bifurcation angle in V-notched Brazilian disc specimen under mixed mode loading | |

A.R. Torabi, M.R. Ayatollahi |

On the formulation of non-local multiaxial high-cycle fatigue models based on the theory of critical distances | |

F.C. Castro, J.A. Araujo, E.N. Mamiya |

On the generation of a loading history with zero mean for structures subjected to multiaxial variable stresses | |

B. Kocer, Y. Yazicioglu, S. Dag |

On the use of the Modified Wöhler Curve Method applied along with the Reference Radius Concept to perform the multiaxial fatigue assessment of welded joints | |

L. Susmel, C.M. Sonsino, R. Tovo |

Phenomenological lifetime assessment for turbine housings of turbochargers | |

F. Laengler, T. Mao, H. Aleksanoglu, A. Scholz |

Rotating bending with constant torsion and rotated bending with constant or variable torsion | |

B.I. Stoychev, S.H. Stefanov |

Scale Levels of Crack Closure Effects and Simulation of Fatigue Cracking of Al-based. Sheet Materials Subjected to Biaxial Cyclic Loads | |

A.A. hanyavskiy |

Sequential biaxial low-cycle fatigue of titanium alloys | |

S. Shukayev, M. Gladskyi, K. Panasovskyi |

Specimen for fracture characterization of material under biaxial stress fields | |

G.P. Pucillo, M. Grasso, F. Penta, P. Pinto |

Strain-life behavior of different groups of metallic materials | |

R. Basan, M. Franulovic, I. Prebil, R. Kunc |

Strength degradation analysis of notched concrete beam based on numerical simulation of bending test under sequential loads | |

Z. Shi, Y. Nakamura, M. Nakano |

Study and D analysis of the drilling process influence on notched single crystal superalloy specimens | |

R. Degeilh, V. Bonnand, D. Pacou |

System for automated fatigue crack growth testing under biaxial loading | |

B.V. Ilchenko, K. Ramesh, V.N. Shlyannikov, R.A. Sitdikov, R. Sunder, G. Vivek |

The effect of mean stress on tension-torsion high-cycle fatigue failure of 2A23-T4 aluminum alloy | |

X. Shi, J. Zhang, R. Bao, B. Fei |

The influence of combined loading on fatigue crack growth from small defects | |

M. Endo, A.J. McEvily |

The influence of static normal stress on shear capacity of bonded high strength steel interfaces | |

S. Renvall, A. Oinonen, G. Marquis |

Three-dimensional analysis of dissipated energy in fatigue crack growth | |

C.M. Davis, J.S. Daily |

A study of biaxial fatigue behavior of a synthetic rubber | |

J.L. Poisson, F. Lacroix, S. Meo, G. Berton, N. Ranganathan |