General Papers
| 000 Review of fatigue crack growth under non-proportional loading | |
| M. Vormwald, P. Zerres |
| 001 Propagation of small cracks under RCF: a challenge to Multiaxial Fatigue Criteria | |
| S. Beretta, S. Foletti |
| 002 Crazing, Crack Paths and Plastic Shielding in Fatigue of Polycarbonate | |
| M. N. James, Y Lu, C. J. Christopher, E. A. Patterson |
| 003 Under cyclic loading, plastic dissipation in heat at the crack tip modifies the stress intensity factor | |
| N. Ranc, T. Palin-Luc, P. C. Paris, N. Saintier |
| 004 Near-threshold behavior of mode II and III fatigue cracks in ferritic and austenitic steel | |
| Jaroslav Pokluda |
| 005 Small Crack Propagation in Multiaxial Notch Fatigue | |
| K. Tanaka |
| 006 Fatigue Fractal Crack Propagating in a Self-Balanced Microstress Field | |
| Andrea Carpinteri, Lorenzo Montanari, Andrea Spagnoli |
| 007 High-Cycle Fatigue in a Hydraulic Turbine Runner | |
| Andrea Carpinteri, Cristian Bagni, Daniela Scorza, Sabrina Vantadori |
| 008 Short crack and long crack propagation in metals based on damage mechanics concepts | |
| Roberto Brighenti, Andrea Carpinteri, Nicholas Corbari |
| 009 Crack Paths in Unidirectional Fibre-Reinforced Brittle-Matrix Materials through Two Computational Models | |
| Roberto Brighenti, Andrea Carpinteri, Andrea Spagnoli and Daniela Scorza |
| Local/global eyes into the crack path behavior in metal/hydrogen interactive system | |
| Y. Katz |
| 014 Microstructural influences on crack initiation and growth in an equiatomic NiTi PE alloy | |
| F. Iacoviello, V. Di Cocco, S. Natali |
| 015 Sn and Ti influence in bending cracks path in hot dip galvanizing coatings | |
| V. Di Cocco, F. Iacoviello, S. Natali, L. Zortea |
| 016 Analysis of fatigue damaging micromechanisms in a ferritic ductile iron | |
| V. Di Cocco, F. Iacoviello, A. Rossi |
| 019 Crack Path for In-service Subsurface Fatigued Turbine Blades | |
| A. A. Shanyavskiy |
| 023 XFEM for fretting fatigue: straight VS mixed mode crack propagation | |
| R. Hojjati-Talemi, M. Abdel Wahab |
| 024 A three-dimensional analysis of fatigue crack paths in thin metallic sheets | |
| J.B. Esnault, V. Doquet, P. Massin |
| 025 Crack paths in a borosilicate glass under triaxial loading | |
| V. Doquet, N. Ben Ali, A. Constantinescu |
| 026 Crack path prediction in layered ceramics designed with residual stresses | |
| O. Ševecek, R. Bermejo, M. Kotoul |
| 027 Fatigue cracking in bifurcation area of titanium alloy at 20 kHz | |
| A. Nikitin, A. Shanyavskiy, T. Palin-Luc, C. Bathias |
| 028 A novel approach for estimation of crack paths in Fibre Metal Laminates | |
| M. Gupta, R.C. Alderliesten, R. Benedictus, Amedeo Manuello Bertetto |
| 029 Threshold Fatigue Crack Growth and Crack Paths in Heat-treated Nodular Cast Iron | |
| R. Konecná, G. Nicoletto, S. Fintová, L. Bubenko |
| 032 Micro cracking of Ceramic and Carbon and Fibres Acoustic Emission in Channel-Die Compressed Mg-Li and Mg-Al Alloys Matrix Composites | |
| A. Pawelek, S. Kúdela, Z. Ranachowski, A Piatkowski, S. Kúdela |
| 033 Crack initiation and path prediction of float glass with various constrain conditions under thermal loading | |
| Q. S. Wang, Y. Wang, J. H. Sun, L. H. He |
| 034 Fatigue Crack Paths in the VHCF-regime of 100Cr6 | |
| P. Grad, E. Kerscher |
| 035 Observation of Fatigue Crack Propagation Mode Transition under Cyclic Torsion Using Micro-CT Imaging with Ultra-Bright Synchrotron Radiation | |
| Y. Nakai, D. Shiozawa, T. Murakami, H. Nosho |
| 036 Effect of Pre-stressing on the Growth Direction of Surface Cracks in Ultrafine Grained Copper | |
| K. Kamil, M. Goto, S. Z. Han, K. Euh, T. Yakushiji, Y. Tatsukawa |
| 037 Fatigue Endurance and Crack Propagation on Polymeric Material Under Ultrasonic Fatigue Testing | |
| G.M. Dominguez Almaraz, Dmitriy Konovalov, Vladimir Peleshko |
| 038 On Coupled Fracture Modes and Three-Dimensional Fracture Mechanics | |
| A. Kotousov, P. Lazzarin |
| 039 Structural Health Monitoring of Wind Towers: Residual Life Estimation | |
| M. Benedetti, V. Fontanari, A. Bulatova |
| 040 Fibre optic sensor grids in structural testing | |
| Karl-Heinz Haase, Antonio Martin-Meizoso |
| 042 Brittle Failure of Inclined Key-hole Notches in Isostatic Graphite under in-Plane Mixed Mode Loading | |
| P. Lazzarin, F. Berto, M.R. Ayatollahi, Petr Belov, L. Kobetz |
| 044 Crack paths propagation under Mode II fracture in concrete composites containing fly-ash additive | |
| G. L. Golewski, P. Golewski, T. Sadowski |
| 045 Strength Degradation Analysis of an Aging RC Girder Bridge Due to Existing Cracks | |
| Jianhong Wang, Zihai Shi, Masaaki Nakano |
| 046 Fatigue crack nucleation at a stress concentration point | |
| D. Leguillon, S. Murer, Yeau-Ren Jeng |
| 047 A statistical evaluation of micro-crack initiation and growth in thermally cut structural elements | |
| M. Šori, S. Glodež, U. Fevžer |
| 048 LEFM-based simulation of fatigue crack growth under nonproportional mixed-mode loading | |
| Ying Yang, Michael Vormwald, Andrea Spagnoli |
| 050 Direction of the Maximum Variance of the Resolved Shear Stress and Orientation of Stage I Crack Paths | |
| L. Susmel, R. Tovo, Yuebibg Li, Zengliang Gao |
| 051 A procedure for evaluating the crack propagation taking into account the material plastic behaviour | |
| A. Rossetti, P. Zerres, M. Vormwald |
| 053 The effect of residual stresses on crack shape in polymer pipes | |
| P. Hutar, M. Ševcík, M. Zouhar, L. Náhlík, J. Kucera |
| 054 Correlation between road public usage and experimental fatigue curves on brazed heat exchanger | |
| Anne-Gaëlle Villemiane, Josselin Paturaud, David Delaux, Aurélien Buteri |
| 055 Relationship between Charpy Impact Energy and Notch Tip Position in Functionally Graded Steels | |
| H. Samareh Salavati Pour, Y. Alizadeh, F. Berto, M. Abolghasemzadeh |
| 056 Modelling of Crack Path Evolution in Round Bars under Cyclic Tension and Bending | |
| J. Toribio, J. C. Matos, B. González, J. Escuadra |
| 057 Role of Pearlitic and Spheroiditic Microstructure in FatigueCrack Paths | |
| J. Toribio, B. González, J. C. Matos, Alfonso Fernández-Canteli |
| 058 Analysis of Failure Paths in Steel Bolted Connections | |
| J. Toribio, B. González, J. C. Matos, F. J. Ayaso |
| 060 New Box-Counting Method as Interpretation of Crack Paths and Mechanical Properties of Concrete with Interface Layer | |
| A. Satoh, K. Yamada, T. Homma, S. Ishiyama |
| 062 Experimental and Numerical Sub-Interface Crack Paths | |
| L. Marsavina, T. Sadowski, M. Knec |
| 063 On the calculation of crack paths in 3-dimensional anisotropic solids | |
| M. Steigemann, B. Schramm, M. Specovius-Neugebauer, H.A. Richard |
| 064 Crack Propagation Calculations in Aircraft Engines by Coupled FEM-DBEM Approach | |
| R. Citarella, M. Lepore, C. Caliani, M. Perrella, J.M. Prado |
| 065 Small Crack Growth Path and Rate under Combined Stresses | |
| N. Shamsaei, A. Fatemi, Leonid Krenev |
| 066 Validation of the numerical stress intensity factor calculation of surface cracks using crack propagation experiments | |
| J. Lebahn, H. Heyer, M. Sander |
| 068 Fatigue-Fractured Surfaces and Crack Paths of Textured Polycrystalline Magnesium Alloys | |
| S. Morita, K. Matsushita, T. Mayama, T. Hirai, T. Enjoji, N. Hattori |
| 071 Evaluation of rolling contact fatigue crack path of high strength steel with artificial defects | |
| T. Makino, Y. Neishi, D. Shiozawa, Y. Fukuda, Y. Nakai |
| 072 Strength Analysis of Attachment Lugs under Cyclic Loading | |
| Slobodanka Boljanovi1, Stevan Maksimovic |
| Cracking of Nanofilm-based Devices for Electrochemical Energetics | |
| B. Bozzini, M. Boniardi, A. Gianoncelli, B. Kaulich, C. Mele, M. Prasciolu, G. Scarselli, M. Kiskinova |
| 074 Crack repairing in AA2099 by Cu electrodeposition (ECD) | |
| Benedetto Bozzini, Pasquale Cavaliere, Claudio Mele, Ivonne Sgura |
| Experimental investigation of fatigue crack propagation in 2xxx aluminum alloy with local yield strength gradient at the crack path | |
| A. Tzamtzis, A.T. Kermanidis |
| 077 Mixed mode I/II fracture path simulation in a typical jointed rock slope | |
| M. R. M. Aliha, M. Mousavi, M. R. Ayatollahi |
| 078 Influence Of Hydrogen Environment On Crack Growth Rate | |
| L. Vergani, C. Colombo, A. Sciuccati |
| 079 Variable T-stress and its implication for crack path | |
| V. N. Shlyannikov, Ioannis Dernikas |
| 080 Prediction of Post-Cracking Behaviour in SFRC Elements Under in-Plane Stresses | |
| P. Bernardi, R. Cerioni, E. Michelini |
| 081 Mode-II and Mode-III Effects of Cyclic Crack Propagation in Specimens | |
| G. Dhondt, M. Schrade, Xin-Hai Li, Lars Östergren, Sten Johansson, Sören Sjöström |
| Mixed mode cohesive crack growth at the bi-material interface between a dam and the foundation rock | |
| A. Alberto, S. Valente |
| 086 Fatigue Crack Growth Path of 2324-T39 Aluminium Alloy under Constant-Amplitude and Spectrum Tension Loading | |
| BAO Rui, ZHANG Ting, FEI Binjun |
| 087 Some Problems of Fatigue Crack Propagation in Marine Structures under Seaway Loading | |
| Y. Sumi |
| 090 Infrared Study of Heat Dissipation under Fatigue Crack Propagation | |
| O. Plekhov, M. Bannikov, A. Terekhina, A. Fedorova |
| 094 Stress analysis around a through crack in a thin copper film using molecular dynamics | |
| D. Johansson, P. Hansson S. Melin |
| 097 Crack paths in steel-titanium explosive cladding | |
| D. Rozumek, Z. Marciniak, E. Macha |
| 099 Fatigue crack initiation and early crack propagation in ultrafine-grained copper in high-cycle fatigue region | |
| L. Kunz1, P. Lukáš, L. Navrátilová |
| 100 Paths of Shear-mode Cracks in Ferritic and Austenitic Steel | |
| T. Vojtek, J. Pokluda |
| 101 Lynx: New Tool to Model Mode-I Fatigue Crack Propagation | |
| R. Branco, F.V. Antunes, J.D.M. Costa, Rudi Denys |
| 102 Mixed Mode Crack Growth for Titanium Alloy in Specimen Various Geometries | |
| V.N. Shlyannikov |
| 103 Second-Order Deformation of the Front of a Mode I Crack Propagating in a Heterogeneous Material | |
| J.B. Leblond, L. Ponson, M. Vasoya, Thierry Palin-Luc, Franck Morel |
| 104 Determination of the cast structure parameter on the basis of micro-segregation analysis | |
| J. Dobrovská, F. Kavicka, K. Stránský, V. Dobrovská |
| 105 Crack paths near the interface between anisotropic solids | |
| M. Specovius-Neugebauer, M. Steigemann, S. A. Nazarov, H.A. Richard |
| 106 Enriched fracture mechanics from discrete elements method | |
| E. Morice, S. Pommier, A. Delaplace |
| 107 In-situ observation of initiation and propagation of (short) microstructural crack growth using a rotating bending machine | |
| P. Huter, M. Wohlfahrt, C. Oberwinkler, Vladimir Pisarev |
| 109 Fatigue Crack Path Evaluation on Two Different Micro-Structures HC and BCC Under Multiaxial Loading | |
| L. Reis, V. Anes, B. Li, M. Freitas |
| 110 Some numerical assessments on intergranular crack propagation in polycrystals. Application to ?-TiAl | |
| D. Geoffroy, J. Crépin, E. Héripré, A. Roos |
| 111 Recent developments in textural fractography of fatigue fractures | |
| H. Lauschmann, Z. Sekerešová, F. Šiška, Yury Matvienko, Taoufik Boukharouba |
| 112 Effect of notch depth and notch root radius on the J-integral in the plates made of functionally graded steel | |
| H. Monajjem, H. Samareh Salavati Pour, Y. Alizadeh |
| 113 Experimental and Numerical Study on Mixed Mode I/II Fatigue Crack Growth in Planar Specimens | |
| I. Varfolomeev, M. Burdack, S. Moroz, D. Siegele, K. Kadau |
| 114 Modelling Crack Propagation in AGR Graphite Bricks in Code_Aster Using the eXtended Finite Element Method | |
| P. Martinuzzi, L. Pellet |
| 115 Growth and interaction of high temperature fatigue cracks nucleated from multiple holes under small or large scale yielding | |
| Flora Salgado, Alain Köster, Vincent Maurel, Luc Rémy |
| Optical and Infrared Vision Non-Destructive Techniques: Integration as a means for the Defects Detection on Impacted Composite Materials | |
| A. Bendada, S. Sfarra, M. Genest, D. Paoletti, S. Rott, E. Talmy, C. Ibarra-Castanedo, X. Maldague |
| 117 Experimental investigations on mixed-mode-loaded cracks | |
| H. A. Richard, N.-H. Schirmeisen, A. Eberlein |
| 119 Microstructure and Loading Effects on Fatigue Crack Growth Paths in Engineering Alloys | |
| Anastasios G. Gavras, Diana A. Lados, A.V. Mukhortova |
| 121 Comparative study of crack path evolution under bending fatigue strain of two corrosion resistant materials | |
| Hamid Sedjal, Fatah Hellal |
| 122 Approximate modelling approaches for estimating the parameters of fatigue | |
| T. Ait Saadi, D. Fournier, A. Berred, B. Sadeg, B. Ait Saadi |
| 123 Crack initiation direction for in-phase biaxial fatigue loading | |
| V. Chaves, C. Madrigal, C. Vallellano, A. Navarro |
| 124 NURBS-based geometric fracture growth representation | |
| A. Paluszny, R. W. Zimmerman, H. Unal, M. Elmas |
| 126 Evaluation of the Mode I Plastic Zone Size at the Crack Tip Using RKPM and FEM | |
| Masood Hajali, Caesar Abishdid, Sten Johansson, Johan Moverare |
| 127 Determination of the Stress Intensity Factor at the Single Edge Crack Tip Using RKPM | |
| Masood Hajali, Caesar Abishdid |
| 128 Characteristics of Crack Interior Initiation and Early Growth Originated from Inclusion for Very-High-Cycle Fatigue of High Strength Steels | |
| Youshi Hong, Zhengqiang Lei, Chengqi Sun, Aiguo Zhao |
| 135 Numerical Simulation of Fatigue Crack Growth in Heterogeneous Material | |
| Masanori Kikuchi, Yoshitaka Wada, Kazuhiro Suga, Yulong Li, Elena Lyapunova, Oleg Naimark |
| 140 Determination of the Fatigue Life of Welded Various Steels by Using Finite Element Method | |
| T.E. Ozdemir, H. Cetinel |
| 141 Numerical Stability of Plane Crack Paths under Mode I Loading Conditions | |
| Rayk Thumser |
| 142 An experimental investigation on crack paths and fatigue behaviour of riveted lap joints in aircraft fuselage | |
| A. Skorupa, M. Skorupa, T. Machniewicz, A. Korbel |
| 143 Three-dimensional stress distributions ahead of sharply radiused V-notches in finite thick plates | |
| Michele Zappalorto, Paolo Lazzarin, Helen Tuch, Sergey Kobenko |
| 145 Effect of Initial Geometric Misalignments of the Circular Notched Bar Specimen on the Fatigue Crack Growth Behavior | |
| I. Kim, Y.J. Zhao, B.-H. Choi, J. M. Lee |
| 146 Determination of the cyclic plastic zone using ECCI-Technique | |
| Jürgen Bär, Volodymyr Hutsaylyuk, Elena Zasymchuk, Andriy Pylypenko |
| 147 Size Effect in the Damage Behaviour of Short Fibre Reinforced Composites | |
| I. Scheider, T. Xiao, N. Huber, J. Mosler |
| 148 Crack orientation in a complete contact fretting-fatigue problem | |
| E. Giner*, M. Sabsabi, P. Dasí, F. J. Fuenmayor, N Herzig |
| 149 Where is the stretch zone? – 3D SEM – a powerful tool to analyze fracture | |
| S. Henkel, A. Weidner, T. Mottitschka, C. Segel, H. Biermann |
| 151 Crack propagation in railway wheel rim in a case of rectilinear ride | |
| P. Navratil, P. Skalka, P. Damborsky, M. Kotoul |
| 153 X-FEM based modelling of complex mixed mode fatigue crack propagation | |
| Hans Minnebo, Simon André, Marc Duflot, Thomas Pardoen, Eric Wyart |
| 154 An understanding of crack growth in VHCF from an internal inclusion in high strength steel | |
| Chong Wang, Alexander Nikitin, Andrey Shanyavskiy, Claude Bathias, Petr Frantík, Zbyn?k Keršner |
| 155 Effect of Ultrasonic Peening on Initiation and Propagation of Fatigue Cracks in Welded Elements | |
| Y. Kudryavtsev, J. Kleiman, V. Knysh, S. Solovei |
| 156 On the crack path in a structure of non uniform stiffness | |
| M. Grasso, A. De Iorio, F. Penta, G.P. Pucillo |
| 158 Crack Growth Evolution from a Notch | |
| C. Navarro, J. Vázquez and J. Domínguez, O.V. Tkachyov, A.K. Yakunin |
| 160 Towards a probabilistic concept of the Kitagawa-Takahashi diagram | |
| Alfonso Fernández-Canteli, Roberto Brighenti, Enrique Castillo, D.G. Pankratov, G. Gray, M. Zocher |
| 164 Crack paths in a superalloy in aged condition | |
| F. Kuhn, F. Zeismann, A. Brückner-Foit, K. Kadau, P. Gravett |
| 166 Determination of crack propagation direction using approach based on generalized linear elastic fracture | |
| L. Náhlík, P. Hutar, M. Ševcík, L. Šestáková |
| 167 Low cycle fatigue of pseudoelastic NiTi alloys | |
| C. Maletta, E. Sgambitterra, F. Furgiuele, R. Casati, A. Tuissi |
| 171 On the crack path of rolling contact fatigue cracks in a railway wheel steel | |
| R. Roberti |
| 172 Fretting Fatigue Strength/Life Estimation Considering Wear Process and Critical Distance Stress Theory | |
| Muhammad Amiruddin Bin Ab Wahab, Toshio Hattori, Minoru Yamashita |
| u012 Growth of a Doubly Periodic Array of Fatigue Cracks in Anisotropic Elastic Medium | |
| V. Bozhydarnyk, H. Sulym, Ia. Pasternak |
| u013 Crack Propagation in a Composite Laminated Plate under Bending | |
| Viktor Bozhydarnyk, Vasyl Shvabyuk, Iaroslav Pasternak, Volodymyr Shvabyuk |
| u152 Effect of Temperature and Microstructure on Hot Ductility Properties of a Boron Steel | |
| A. Dimatteo, G. Lovicu, M. DeSanctis, R. Valentini |
| u169 Crack Formation and Crack Path in CFRP Machining | |
| R. Rentsch, Sergii Mamedov |