General Papers
| A 'sigma D' approach for the assessment of creep crack initiation in 316L stainless steel CT test specimens | |
| D.G. HOOTON, D. GREEN |
| A comparative numerical study of the ductile tearing in welded joints using a global and a local approach | |
| A. Imad, M. Nait Abdelaziz, A. Amrouche, A. Al Rassis, G. Mesmacque, C. Eripret |
| A comparison of classical continuum mechanics with a dislocation model to describe cyclic crack tip plasticity | |
| F. O. RIEMELMOSER, R. PIPPAN |
| A fatigue analysis of the effect of local geometry in toe ground welded joints | |
| E. C. GOMES, C. MOURA BRANCO |
| A fracture mechanics methodology for preventing rapid crack propagation in polyethylene pipes | |
| F. MASS A. A. LAURENT, R. PIQUES |
| A fracture mechanics model for interacting cracks in thermal fatigue | |
| T. Johansson, E. Kullig, A. Bruckner-Foit, H. Riesch-Oppermann |
| A laser microprojector non-destructive control method for surface cracks | |
| P. TODOROVIC, J. MILJK. VIC, M. D. I. POROVIC |
| A methodology to determine the SCC behaviour of steels in EPFM regime. Application & validation | |
| J.A. ALVAREZ, F. GUTIERREZ-SOLANA, J. J. GONZALEZ |
| A model of damage and fracture based on fuzzy sets theory | |
| L.L. Mishnaevsky Jr., S. Schmauder |
| A new simplified method for calculating J integral - the elastic plastic stress state method | |
| J. Heliot, A. Pellissier-Tanon, M. Benoit |
| A numerical analysis of the crack-tip plastic zone in glassy polymers | |
| J. LAI, E. VAN DER GIESSEN |
| A numerical model for crack growth in brittle materials based on the element free Galerkin method | |
| D. HEGEN |
| A simple method for the determination of geometric correction factors in linear elastic fracture mechanics | |
| D.L. Chen, B. Weiss, R. Stickler |
| A simplified method for evaluating residual stresses by means of CTOD measurements | |
| M. PEREIRA, H. WOHLFAHRT, F. DARWISH |
| A thermodynamic background of empirical dependence of material's strength and fracture on time | |
| A.J. KRASOWSKY, L. TOTH |
| A weight function for stress intensity factor evaluation in steel bridges orthotropic decks | |
| M. Beghini, L. Bertini, V. Fontanari |
| An analysis of the brittle fracture mechanism in cast steel | |
| M. B. GOLASKA |
| An assessment of the fracture resistance of mismatched weld joints in precracked Charpy V notch impact test | |
| E. RANATOWSKI, J. SADOWSKI |
| An experimental study of mixed-mode failure criteria for glass/epoxy composites | |
| F. DUCEPT, D. GAMBY, P. DA VIES |
| An interface crack with bonding in its end regions and the adhesion fracture energy | |
| R. V. Goldstein, M. N. Perelmuter |
| Analysis of fracture behaviour of surface cracked wide-plates containing overmatching weld metal | |
| E. JUNGHANS. M. KOCAK, K.H. SCHWALBE |
| Analysis of J-integral dependence on stress hardening exponent for finite non-linear elastic cracked body | |
| R. RISNYTCHUCK |
| Analysis of orthogonally cracked laminates under shear loading | |
| C. HENAFF-GARDIN, M.C. LAFARIE-FRENOT |
| Analysis of propagation of fatigue crack on gears on the base of experiment | |
| B. ABERSEK, J. FLASKER |
| Analysis of the PISC results in view of improved NDE codes, industrial practice and technology transfer | |
| M. BIETH, S. CRUTZEN. P. LEMAITRE, A. MILLER, R. NICHOLS |
| Analytical solution of three-dimensional problem for elliptical crack subjected to arbitrary time-harmonic loads | |
| E.I. SHIFRIN |
| Applicability of magnetic and electric emission techniques for detecting crack initiation in impact tests | |
| G.B. LENKEY, S. WINKLER, Z. MAJOR, I. LEVAY |
| Application of engineering methods on reactor pressure vessel integrity assessment | |
| H. TALJA, H. KEINANEN |
| Application of fracture mechanics in the design and operation of nuclear PWR in France | |
| A. PELLISSIER TANON, S. BHANDARI |
| Application of T*-integral to the ductile crack propagation analysis in the media with voids | |
| V.l. KOSTYLEV, B.Z. MARGOLIN |
| Application of the gash model for analysis of dynamic behavior of a rotor with a crack | |
| R.R. NIKOLIC, V.A. MARJANOVIC |
| Assessing the effectiveness of toughening agents | |
| J.C. GRAHAM, J.P. DEAR |
| Assessment of fatigue precracking methods for fracture toughness testing of Q+T weldments | |
| N. GUBELJAK, M. KOCAK, I. RAK |
| Asymptotic fields of a mode III crack meeting an inclined interface between two elastic-plastic materials | |
| J. Li, X.B. Zhang |
| Asymptotic method in the plane theory problem for the orthotropic strip with cuts | |
| I. Adrianov, M. Matyash, S. Koblik |
| Atmospheric influence on fatigue crack propagation in Ti 6246 alloys at elevated temperature | |
| C. SARRAZIN-BAUDOUX, S. LESTERLIN, J. PETIT |
| Behaviour and fracture of polyethylene at high temperature under high pressure of methane | |
| E. GAILLARD-DEVAUX, B. DEWIMILLE, J. JARRIN, R. PIQUES |
| Behaviour of cracked cylinders under combined thermal and mechanical loading | |
| S. Ignaccolo, B. Drubay, B. Michel, P. Gilles |
| Both short and long fatigue crack growth in an austenitic stainless steel at 650°C | |
| J.P. POLVORA, B. DRUBAY. R. PIQUES, B. MARTELET |
| Boundary integro-differential equations for anisotropic crack problems | |
| A. Le Van, J. Royer |
| Calculation of multiaxial fatigue for aeronautical applications | |
| D. DUPRAT, A. DAVY, D. CAMPASSENS |
| Calculation of notch root stress-strain of a steering arm; | |
| A. YAZDANPANAH, G. COCKERHAM, D.E. EATON |
| Calculation of process of damage accumulation in filled elastomer composites | |
| A.L. SVISTKOV, L.A. KOMAR |
| Ceramique inclusion effects on ultrasonic fatigue at high temperature on a powder Nickel base superalloy : the N18 | |
| J. BONIS, C. BATHIAS, F. SONIAK |
| Characterising fracture in polymers and composites | |
| J.G. WILLIAMS |
| Characteristics of fracture behaviour of duplex steels in transition region | |
| I. DLOIJHY. A. PROCHAZKOVA. V. KOZAK, M. HOLZMANN |
| Characterization of interfacial fracture of diffusion bonded bi-material joints of Ti alloys | |
| G. Cam, Y.-J. Kim, M. Kocak |
| Circumferential surface cracks in pipes | |
| A. Carpinteri, R. Brighenti, A. Spagnoli |
| Cohesive zone model for ductile fracture. Comparison of prediction with experiment | |
| I.. GUOYU, A. CORNEC, K.H. SCHWALBE |
| Comparison of constraint measuring parameters in fracture theories for ductile materials | |
| B. S. HENRY, A. LUXMOORE |
| Computer code for calculating the factor of safety against fracture and the fatigue crack propagation | |
| P. TRIPA, L. MARSAVINA |
| Conception of cohesive forces in nonlinear fracture mechanics | |
| I.M. LAVIT |
| Correlation between cavitation erosion and random fatigue properties of selected steels | |
| W. BEDKOWSKI, G. GASIAK, A. LICHTAROWICZ, E. MACHA |
| Corrosion and temperature effects on crack kinetics in steels | |
| O.M. ROMANIV |
| Corrosion fatigue of structural steel in artificial seawater | |
| P.C.H. AMENT, M. JANSSEN, C.J. VAN DER WEKKEN |
| Crack behaviour in a three dimensional contact modelling of a knee joint replacement under running conditions | |
| S. PLUMET, M.-C. DUBOURG |
| Crack closure effect on crack growth rate in N18 nickel base superalloy | |
| S. POMMIER. C. PRIOUL, F. SONIAK, P. BOMPARD |
| Crack extension testing of 3161, stainless steel under slow strain rate and hydrogen charging | |
| A. VALIENTE, L. CABALLERO, J. RUIZ, J. FERNANDEZ |
| Crack growth in pressure sensitive, elastic-plastic materials | |
| K.P. HERRMANN, B. POTTHAST |
| Crack initiation on 316L(N) CT specimens under creep-fatigue conditions | |
| L. LAIARINANDRASANA, R. PIQUES, B. DRUBAY |
| Crack kinking in anisotropic materials | |
| C. Blanco, J. M. Martinez Esnaola, J.M. Nastero, M. Fuentes |
| Crack size dependence of the ductile fracture behaviour of a high strength steel | |
| C. BETEGON. C. RODRIGUEZ, F.J. BELZUNCE |
| Crack tip fields for rapidly growing cracks in viscoplastic materials | |
| S. Heimer, D. Gross |
| Crack tip opening angle related to the Paris tearing modulus in A533B steel | |
| J.T. BARNBY, A.S. NADKARNI |
| Crack tip plasticity investigation using Dugdale strip yield model approach | |
| D. Pustaic, B. Stok |
| Crack-tip strain distribution measurement in ductile material from optical grating recording on a whole-field | |
| M. COTTRON, S B. WANG, A. LAGARDE |
| Creep behaviour and structural changes of Cr 2.25 Mo Steel after long-term service in hydrogen | |
| V. BINA, O. BIELAK, F. HNILICA |
| Cyclic fatigue - crack growth in toughened ceramics and intermetallics at ambient to elevated temperatures | |
| R. O. RITCHIE, K. T. VENKATESWARA RAO |
| Damage accumulation criterion for multiaxial high and low cycle fatigue | |
| Z. Mroz, A. Seweryn |
| Damage and crack growth modelling by fracture process zone | |
| V.N. Shlyannikov |
| Damage and failure modelling in fiber-reinforced composites at combined loading | |
| A.A. TASHKINOV, A.N. ANOSHKIN |
| Damage and fracture process in concrete - a combined approach | |
| M. PAVISIC, N T. KORDIC DIKOVIC |
| Damage evolution in ceramic matrix composites | |
| M R. ELIZALDE, J.M. SANCHEZ. A.M. DANIEL, I. PUENTE, A. MARTIN. J.M. MARTINEZ-ESNAOLA, M. FUENTES |
| Damage mechanisms in fibre reinforced concrete composites | |
| P. STROEVEN |
| Damage modelling under impact response of a dynamic loading | |
| J. CACKO |
| Damage of the particulate composite due to thermal internal stresses | |
| D. SUMARAC |
| Damage tolerance analyses of bolt/nut assemblies | |
| A.U. de Koning, T.K. Henriksen |
| Deformation and friction during scratching of polymeric surfaces | |
| B.J. BRISCOE, E. PELILLO, S.K. SINHA |
| Determination of crack initiation toughness by impact and dynamic testing | |
| H. RICHTER, J. BOHMERT, H.W. VIEHRIG |
| Determining of mechanisms of local electrochemical processes in crack-like defects under corrosion fracture of carbon steel | |
| V.V. PANASYUK, I.M. DMYTRAKH, O.A. YEZERSKA |
| Development of lifing methodologies for high resistance super-alloys in aeronautical turboengines | |
| J. Y. GUEDOU, J.C. LAUTRIDOU |
| Direct measurement of J integral - Experience and prospective | |
| S. SEDMAK. B. PETROVSKI, T. ADZIEV, A. SEDMAK, J. GOCEV |
| Ductile-brittle transition for reinforced concrete beams : experimental and numerical investigation | |
| C. BOSCO, A. CARP1NTERI. M. EL-KHATIEB, G. FERRO |
| Durability and fracture calculational model of solids under their contact interaction | |
| O.P. DATSYSHYN, V.V. PANASYUK |
| Durability design of welded structural systems with developing damages | |
| V.V. MOSKVICHEV, S.V. DORONIN |
| Dynamic compression and fracture of plain carbon steel | |
| A. DOIG, H. TAYLOR |
| Dynamic crack propagation and crack arrest behaviour of two low alloy steels | |
| E. BOIJYNE, T. IUNG, A. PINEAU |
| Dynamic fracture of armor steel | |
| B. GAILLY, A. PINEAU |
| Dynamic loading on engineering materials and components | |
| C. WILSON, P. KERRY, O. CRICHTON |
| Edge toughness of brittle materials | |
| M. HANGL, R. DANZER, R. PAAR |
| Effect of high-strength low-alloy (HSLA) steels microstructure on susceptibility to cold cracking | |
| J. CWIEK |
| Effect of local weld metal mis-matching on fracture toughness of QT steel weld joints | |
| I. RAK. V. GLIHA, N. GUBELJAK, M. KOCAK. |
| Effect of matrix morphology on fatigue behaviour of carbon/peek composite | |
| M.C. LAFARIE-FRENOT, J. DENAULT, I. GOUPILLAUD, H. EL KADI |
| Effect of oiling up on acoustic emission determined failure of concrete | |
| J. HOLA, Z. MATROWSKI |
| Effect of selected factors on stress corrosion cracking of the AIZn5Mgl alloy | |
| J. LABANOWSKI. A. ZIELINSKI, H.A. JAWAN |
| Effect of strain ageing on the fracture toughness and tensile properties of Si-killed C-Mn steels | |
| R. MOSKOVIC, B.D. LEIGH, R.H. PRIEST |
| Effect of strain rate on ductile failure behaviour of FeE 460 TM steel | |
| U. ACHENBACH, N. SCHLÜTER, F. GRIMPE, W. BLECK, W. DAHL |
| Effect of temperature on fatigue threshold (DKeffth) : prediction | |
| Y.I. RAGOZIN, l.A. OBORINA |
| Effect of temperature on the tensile behaviour of a CAS/SiC ceramic matrix composite | |
| I. PUENTE, J.M. SANCHEZ, M. R. ELIZALDE, J. M. MARTINEZ, M. FUENTES, A. ARTIN |
| Effect of test specimen geometry on ductile fracture toughness of a C-Mn steel | |
| L. BAUVINEAU, M. BETHMONT, H. BURLET, A. PINEAU |
| Effects of (initial) fracture mode on fracture toughness and/or stress intensity | |
| J. ZUIDEMA, A. KROM |
| Effects of dynamically ion mixed thin coatings on fatigue damage processes in Titanium alloys | |
| S. PERAUD, P. VILLECHAISE, J. MENDEZ |
| Effects of fibre failure and initial notch size on the fatigue crack growth behaviour in a Ti beta 21s/SCS-6 composite | |
| J. IU, P. BOWEN |
| Effects of fibre volume fraction on fatigue crack growth in titanium metal matrix composites | |
| A.L. DORE, T.J.A. DOEL, P. BOWEN |
| Effects of internal hydrogen on fracture behaviour of A508.3 steel at low temperatures | |
| J. SOJKA, J. GALLAND L. HYSPECKA, M. TVRDY |
| Effects of residual stresses induced by shot peeing on cracks propagation | |
| O. Jung, Y. Ousset |
| Effects of small defects and inhomogeneities on fatigue strength : experiments, model and applications to industry | |
| Y. MURAKAMI |
| Effects of temperature, strain rate and geometry on the fracture toughness of polyurethane | |
| A. GHOUL, A. BOUABDALLAH, M. BENGUEDIAB, N. RANGANATHAN, J. PETIT |
| Elasticity solution for laminated orthotropic cylindrical shells under dynamic patch load | |
| M. SHAKERI, M.R. ESLAMI, M. H. YAS |
| Elevated temperature crack growth in a low alloy steel due to major and minor stress cycles | |
| M. HAWKYARD, B.E. POWELL |
| Engineering criteria for evaluation of residual life of structural elements | |
| V.V. PANASYUK, O.Ye. ANDREYKIV, O.I. DARCHUK |
| Environmental fatigue in gaseous atmospheres in an aluminium alloy | |
| J. RUIZ, M. ELICES |
| ESIS TC6 round robin on fracture toughness of ceramics | |
| R.J. PRIMAS, R. GSTREIN |
| Estimation of the dynamic J-R-curve from a single impact bending test | |
| H.J. SCHINDLER |
| Estimation of the R-curve by in situ measurements | |
| E. Schick, J. Ude, F. Michel, H. Blumenauer |
| Evaluation of damage in different concretes : fractal analysis and relation to toughness characteristics | |
| B. CHIAIA, J.G.M. VAN MIER |
| Evaluation of mixed mode crack resistance curves using biaxially loaded specimens | |
| C. DALLE DONNE, H. DOKER |
| Experimental and numerical evaluation of fatigue crack initiation and propagation for IN738LC at 850°C | |
| B. FEDELICH, H. FRENZ. W. OSTERLE, K. STARK |
| Experimental and numerical investigations on cleavage fracture | |
| F. GRIMPE, I. HAHN, C. JUDE-ESSER |
| Experimental and theoretical approach to fretting crack nucleation on pre-stressed aluminium alloy | |
| P. REYBET-DEGAT. V LAMACQ, M.-C. DUBOURG, Z.R. ZHOU, L. VINCENT |
| Experimental approach of damage cumulation in high cycle fatigue with random loadings in blocks | |
| T. PALIN-LUC, S. LASSERRE. C. FROUSTEY, J.Y. BERARD |
| Experimental background for the fatigue crack kinetics simulation | |
| N.V. TUMANOV, S.A. CHERKASOVA |
| Experimental determination & micromechanical modelling of damage in nodular cast iron | |
| W. BAER, D. STEGLICH, W. BROCKS, G. PUSCH |
| Experimental investigation of the fracture behaviour of reinforced ultra high strength concrete | |
| J.P. ULFKJAER, M.S. HENRIKSEN, B. AARUP |
| Experimental stress analysis in the cracked stage of the reinforced beam | |
| M. JARONIEK |
| Factors influencing creep-fatigue crack propagation in P/M astroloy at 650°C and 750°C | |
| C. CARBOU, J. MENDEZ, P. VIOLAN |
| Failure analysis of a generator rotor with a deep crack: | |
| V. BICEGO, E. LUCON, C. RINALDI, R. CRUDELI |
| Failure of a bundle of ceramic fibres in a CMC | |
| R. PAAR, J.L. VALLES |
| Failure resistance in titanium alloy joints under biaxial loading with tension | |
| V S. ZHERNAKOV, I.N. BUDILOV, R.M. SABIROV |
| Fatigue behaviour of a glass fibre reinforced polypropylene composite | |
| J A.M. FERREIRA. J.D M. COSTA, M.O.W. RICHARDSON |
| Fatigue behaviour of two cast aluminium-silicon alloys | |
| F.J. ESTENSORO, A. PELAYO, A.M. IRISARRI |
| Fatigue crack growth in a pressurized pipe | |
| T. BOUKHAROUBA, J. GILGERT, G. PLUVINAGE |
| Fatigue crack growth of Al-SiCp metal-matrix composites | |
| D. JAKOVIC, S. MARKOVIC, D. MOMCILOVIC, Z. BURZIC, D. STANKOVIC |
| Fatigue crack initiation and early growth in a multi-layered fibre-metal composite laminate glare 2 | |
| A. VASEK, J. POLAK, L.B. OGELESANG |
| Fatigue crack propagation behaviour of a lamellar Ti-Al Alloy | |
| C. MABRU, G. HENAFF, J. PETIT |
| Fatigue crack propagation in railway axles | |
| V. GROS, C. PRIOUL, Ph. BOMPARD, P. LALLET |
| Fatigue crack-initiation from notches in ferritic-pearlitic steels | |
| Y. MEZIERE |
| Fatigue damage behavior of a coated Ni-base single crystal superalloy | |
| F. GALLERNEAU, D. NOUAILHAS, J.L. CHABOCHE |
| Fatigue damage in light alloys under block loading, with stress concentration and fretting corrosion | |
| V.T. TROSHCHENKO, V.I. DRAGAN, S.M. SEMENYUK |
| Fatigue damage in spheroidal graphite cast iron (SGI) | |
| Y. NADOT. J. MENDEZ, N. RANGANATHAN, A.S. BERANGER |
| Fatigue fracture behavior of Single-Edged-Notched specimens prepared from polyethylene pipes | |
| H. JAAFAR, G. FERNANDO |
| Fatigue life of hardfaced elements | |
| J. OKRAJNI, J. DZIUBINSKI, P. ADAMIEC |
| Fatigue of welded and adhesively bonded aluminium alloys for use in automotive applications | |
| D. HEJCMAN, J.F. KNOTT, P. BOWEN, C.L. DAVIS |
| FE modelling of delamination growth in DCB specimens with material variability or geometric imperfections | |
| T. Besant, P. Robinson, D. Hitchings |
| Finite element analyses of toe ground welded cruciform -joints subjected to low-cycle fatigue conditions | |
| T.L. DICKERSON |
| Finite element simulation of the fracture behaviour of elastomers within a large transformation framework | |
| S. THUILLIER, G. RIO |
| Fitting the Gurson parameters by using a physical void coalescence mechanism | |
| Z.L. ZHANG, M. HAUGE |
| Fractal aspects of damage in concrete | |
| P. STROEVEN |
| Fractographic analysis of aircraft engines compressors disks from Ti-alloys fatigued in service | |
| A. A. SHANYAVSKY, A.I. LOSEV |
| Fracture and delayed fracture of notched beams | |
| C. JOURDAIN, G. VALENTIN |
| Fracture and wear processes simulating under cyclic contact of solid bodies | |
| O.P. DATSYSHYN |
| Fracture behaviour of injection moulded rubber toughened poly(butylene terephthalate) composites | |
| Z.A. MOHD ISHAK, J. KARGER-KOCSIS |
| Fracture behaviour of ultra-low carbon bainitic steels for heavy section applications | |
| S.M. PYTEL, C.I. GARCIA, A.J. DeARDO |
| Fracture due to solid structural transformation | |
| I.V. Nikitin |
| Fracture electronics - Fracture analysis of microelectronic components and chips | |
| B. MICHEL, T. WINKLER, A. SCHUBERT |
| Fracture energy and mechanical behaviour of clay elements | |
| C. BOSCO |
| Fracture evolution and snap-back instability in multi-cracked finite plates | |
| A. Carpinteri, I. Monetto |
| Fracture instabilities and scale effects in brittle solids and brittle matrix fibrous composites | |
| A. CARPINTERI, R. MASSABO |
| Fracture of a semi-infinite medium containing a macrocrack and microcracks | |
| V. Petrova, V. Tamuzs, T. Mescheryakova |
| Fracture of epoxy bonded dynamic peel specimens containing interfacial layers | |
| H. TAYLOR. W.C. LAW, D L. CHADWICK |
| Fracture of PMMA due to V-Notches | |
| F.J. GOMEZ, A. VALIENTE, M. ELICES |
| Fracture of rubbers : experimental and numerical determination of the J integral | |
| N. AIT HOCINE, M. NAIT ABDELAZIZ, G. MESMACQUE |
| Fracture of single crystal superalloys under cyclic loading at high temperatures | |
| H. FRENZ, J. KINDER, H. KLINGELHOFER, P.D. PORTELLA |
| Fracture propagation in cast irons | |
| V. VASAUSKAS |
| Fracture toughness of an isothermally forged y -Titanium Aluminide | |
| N.B. JENKINS, P. BOWEN |
| Fracture toughness of gamma-based titanium aluminides | |
| B. BITTAR, P. BOWEN |
| Fracture toughness of rolling bearing steels | |
| R. DOGLIONE, R. GARIGLIO. M. PUGLIA, D. FIRRAO |
| Fracture toughness of tool steels using chevron notched specimens | |
| A. VILLELLAS, R. RIOS, A. MARTINEZ, G. AMPOS |
| Fracture-induced scale effect on the modulus of rupture in quasi-brittle materials | |
| J. PLANAS, M. ELICES, G V. GUINEA |
| Fretting fatigue crack growth analysis: experimental photoelastic method combined with numerical model | |
| V. LAM ACQ, M.C. DUBOURG, B. VILLECHAISE |
| From the european group on fracture to the European structural integrity society | |
| D. FRANCOIS |
| Generalized path independent integral in linear fracture mechanics | |
| Ph. Bressolette, Ch. Petit, A. Vergne |
| Grain boundary fracture in the cleavage regime of polycrystalline metals | |
| A. Crocker, G. Smith, P. Flewitt, R. Moskovic |
| Growth of naturally initiated fatigue cracks in alloy 800 under symmetrical Push-Pull Loading | |
| R. ADOLFS. H.J. CHRIST, K. DETERT |
| High temperature corrosion fatigue of platinum coated MAR-M 002 Nickel-base superalloy | |
| G. GOVENDER, E. AGHION, N. COMINS |
| High temperature fatigue damage evaluation of steam turbine rotor steel | |
| G. JAYARAMAN, C. PRASAD, K. RAJANNA |
| High temperature fracture mechanisms of a coated nickel- base superalloy : influence of the testing mode | |
| A. SANZ, L. LLANES, J.P. BERNADOU, M. ANGLADA, M.B. RAPACCINI |
| High-cycle and low-cycle fatigue interaction under 2-step strain control | |
| Y. GONG, M.P. NORTON |
| Hybrid fracture/damage approach | |
| J.C.W. VAN VROONHOVEN, J.B.A.M. HORSTEN |
| Hydrogen effect on high-temperature degradation of a Cr-Mo-V steel | |
| H.M. NYKYFORCHYN, M. SCHAPER, O. Z. STUDENT, B. P. LONIUK |
| Hydrogen-assisted micro-damage in pearlitic steel : experimental evaluation and mechanical modelling | |
| J. TORIBIO |
| Impact fracture testing of poly(oxy methylene) | |
| Z. MAJOR, R.W. LANG |
| Impact of coupling to carbon steel on hydrogen uptake and cracking of duplex stainless steel in oilfield environments | |
| A.J. GRIFFITHS, A. TURNBULL |
| In situ characterization of low frequency corrosion fatigue at mesoscopic and microscopic scales | |
| J.M. OLIVE, C. SUDRY, D. DESJARD1NS |
| Indentation and impact behaviour of FRP composites | |
| M.S. FOUND |
| Influence of a coating on the fatigue damage of the <001> AMI single crystal superalloy at 950°C | |
| P. PERRUCHAUT, P. VILLECHAISE, J. MENDEZ |
| Influence of ageing on creep crack growth behaviour of rotor forging and casing casting steels | |
| K. SINGH, S.C. BOSE, G.J. REDDY, K M. CHOWDARY, V.M. RADHAKRISHNAN |
| Influence of cross-correlation between normal stresses on biaxial fatigue | |
| T. LAGODA, E. MACHA |
| Influence of geometry and load case on the local stress state in wide plates with semi elliptical surface cracks | |
| F. Grimpe, W. Dahl |
| Influence of local stress and strain concentrators on the reliability and safety of structures ILSSCRSS | |
| G. PLUVINAGE |
| Influence of microstructural parameters on fatigue resistance of dual-phase steel | |
| J.P. MESSIAS, C.A.R.P. BAPTISTA, H.J.C. VOORWALD, V.A. PASTUKHOV |
| Influence of particle size and volume fraction on fracture and fatigue behaviour of Al 6061/SiC metal matrix composites | |
| R. CARVALHO, M. de FREITAS |
| Influence of small surface discontinuities at the weld toe on bending fatigue strength | |
| V. GLIHA |
| Influence of spinodal decomposition on the mechanical properties of duplex stainless steel | |
| M. NYSTROM, B. KARLSSON |
| Influence of strain history on ductile failure of steel | |
| J. ARNDT, F. GRIMPE, W. DAHL |
| Influence of strain rate and solidification rate on the mechanical behaviour of Al-Si-Mg alloys | |
| J.L. DOUZIECH. C. BERDIN. R. DOGLIONE, D. FRANÇOIS |
| Influence of stress ratio and time at maximum load on the fatigue crack growth behaviour of IN7I8 at 600°C | |
| C. MOURA BRANCO, F.V. ANTUNES, J. BYRNE |
| Influence of the configuration of reconstituted specimens on fracture toughness characterization of pressure vessel steels | |
| F. de BACKER, F. GUTIERREZ-SOLANA |
| Influence of the constraint effect on fracture resistance of mismatched weld joints | |
| E. RANATOWSKI |
| Influence of the crack tip three-dimensionality on the evaluation of sifs by caustics | |
| M. KONSTA-GDOUTOS |
| Influence of the heat treatment and notch orientation on the fracture toughness of a TI-6AI-4V plate | |
| L.M. PLAZA. F. ZAPIRAIN, A. VEGA DE SEOANE, A.M. IRISARRI |
| Influence of the strain rate on damage and failure mechanisms of composite bonded joints and substrates | |
| A. ROY, JL. GACOUGNOLLE, B. BLACKMAN, A. KINLOCK, P. DAVIES |
| Information-theoretic interpretation of multifractal formalism and analysis of fracture surfaces | |
| G. V. Vstovsky, I.J. Bunin, A. G. Kolmakov |
| Inhibition effect on resistance of low-alloyed steel to corrosion fatigue in neutral environments | |
| Y.I. BABEI, Z. V. SLOBODIAN, H.M. NYKYFORCHYN |
| Initiation, propagation and arrest of cracks in dynamic of pipeline steels at low temperatures | |
| A. GHOUL, A. BOUABDALLAH. M. BENGUEDIAB, N. RANGANATHAN, J. PETIT |
| Instrumented impact test : determination of crack resistance curves of polymers | |
| S. SEIDLER, W. GRELLMANN |
| Instrumented impact testing as a method of cleavage fracture stress determination (tempered hainitic steels) | |
| M. HOLZMANN. I. DLOUHY, L. VALKA |
| Instrumented impact testing of sub-size charpy-V specimens : the activity of the ESIS TC5 working party | |
| E. LUCON |
| Investigation into the use of miniature specimens for the determination of KIc and KIscc values | |
| D. SARCHAMY, M.G. BURNS, A. NADKARNI |
| Investigation of fatigue fracture mechanism of Fibre reinforced injection moulded polyamide | |
| J.J. HORST |
| Investigations into the'Pellini' drop-weight test for characterising structural crack arrest behaviour | |
| C.S. WIESNER, S.D. SMITH |
| Investigations on the fatigue crack growth rate in 10HNAP steel after single overloading by the amplitude while tension | |
| G. GASIAK, J. GRZELAK |
| Involution of JR-TR curves with low temperature aging of duplex stainless steels | |
| L. SANCHEZ, F. GUTIERREZ-SOLANA, J. GONZALEZ |
| J estimation scheme for surface cracked piping under complex loading: part I. Theoretical basis | |
| Ph. Gilles |
| J estimation scheme for surface cracked piping under complex loading: part II. Complex shaped Elbow solutions | |
| Ph. Gilles, C. Bois |
| Joining elastic plates into package along curves | |
| V.V. Silvestrov, A. V. Shumilov |
| K-dominance condition in hydrogen assisted cracking : the effect of far field on hydrogen transportation to fracture sites | |
| J. TORIBIO, V. KHARIN |
| Limit load of an axially cracked pipe under combined pressure, bending and tension | |
| J. DESQUINES, C. POETTE, B. MICHEL. C. WIELGOSZ, B. MARTELET |
| Local criterion for cleavage fracture and fracture toughness prediction | |
| B.Z. MARGOLIN. V.A. SHVETSOVA |
| Longitudinal splitting of notched FRP composites | |
| M.S. FOUND |
| Macro-super-penetration | |
| G.P. CHEREPANOV |
| Mechanical aspects of the Charpy impact test | |
| A. ROSSOLL, C. BERDIN, P. FORGET, C. PRIOUL, B. MARINI |
| Mechanical evaluation of a reversion heat treatment for a duplex stainless steel thermally embrittled | |
| A. MATEO. J.L. PALOMINO. N. SALAN. L. LLANES, M. ANGLADA |
| Mechanisms and characteristics of damage and failure in terms of the theory of phase transition | |
| L.R. Botvina |
| Microcrack toughening : mutual interactions and energy dissipative mechanisms | |
| A. BRENCICH, A. CARPINTERI |
| Microcrack-model of creep under non-proportional loading | |
| G. GORAZHI, S. SKLEPUS, A. ZOLOCHEVSKY |
| Micro-fractography of cleavage fracture by EBSP technology and computer assisted stereophotogrammetry | |
| C.O.A. SEMPRIMOSCHNIG, R. PIPPAN. O. KOLEDNIK, D.J. DINGLEY |
| Micromechanical modelling of damaged SMC composite behaviour by introducing a local statistical interface failure criterion | |
| J. FITOUSSI, G. GUO, D. BAPTISTE |
| Microstructural modeling of the fracture toughness of 7000 Al alloys | |
| P. ACHON, J.C. EHRSTROM, A. PINEAU |
| Microstructure and mechanical properties of multilayer submerged arc C-Mn weld metal | |
| T. ADZIEV, J. GOCEV, S. CVETKOVSKI |
| Minimum specimen size requirements and validity criteria for KIIC - tests | |
| W. HIESE, J.F. KALTHOFF |
| Mixed mode (I+II) model of fatigue crack growth | |
| K. GOLOS, Z. OSINSKI, D. KRACIUK, B. WASILUK |
| Mixed-mode fracture of asymmetric interfaces | |
| J.-B. FERRER |
| Mode II delamination cracks in laminate composites with through-thickness reinforcement | |
| R. MASSABO, B.N. COX |
| Modeling of the localized UV-degradation damage in polymers | |
| I. D. SKRYPNYK, H.D. HOEKSTRA, J.L. SPOORMAKER |
| Modelling hydrogen diffusion near crack tip in metals : implications in slow strain rate testing | |
| J. TORIBIO, V. KHARIN |
| Modelling hydrogen induced cracking using a coupled diffusion-elasto-plastic stress analysis | |
| A.H.M. KROM. R.W.J. KOERS, A. BAKKER |
| Modelling intergranular crack growth in 2D and 3D voronoia cells | |
| P. SANDERA, P. PONIZIL, J. POKLUDA |
| Modelling of creep-fatigue interaction of Zirconium alfa under cyclic loading at 200°C | |
| C. VOGEL. B DRUBAY. M. MOTTOT, G. CAILLETAUD |
| Modelling of surface damage and fracture of polycrystalline copper under plastic fatigue | |
| A. BALTOV, J. MENDEZ, P. VIOLAN, A. DRAGON |
| Modelling of the Charpy V-notch test at low temperature for structural steels | |
| M. TAHAR, R. PIQUES, P. FORGET |
| Multifractality of transverse cracking and cracks length distribution in a cross-ply laminate under fatigue | |
| V.V. SILBERSCHMIDT, C. HENAFF-GARDIN |
| Multiscale micromechanical approach to carbon-carbon structure engineering | |
| A.A. CHEKALKIN, A G. KOTOV, Yu.V. SOKOLKIN |
| New criterion of fatigue fracture initiation and crack growth model in pearlitic steels | |
| G.P. KARZOV, B.Z. MARGOLIN, V.A. SHVETSOVA |
| New fundamental fracture criteria | |
| Yu. I. Ragozin |
| Non singular terms in crack tip stress distribution for plane problems | |
| M. Beghini, L. Bertini, F. Di Puccio |
| Nonlocal stress field in a orthotropic plate with a slanted crack | |
| P.J. Berbinau |
| Notch sensitivity of CFRP plates under compression | |
| C. SOUTIS |
| Numerical analysis of micro-fracture maps in notched specimens | |
| J. TORIBIO, E. VASSEUR |
| Numerical and experimental analysis of the stable crack growth | |
| A. NEIMITZ, B. D. DROBENKO. I. R. DZIOBA, Z. LIS, R. MOLASY |
| Numerical approach in viscoelastic fracture mechanics | |
| F. DUBOIS. C. PETIT, G. GHAZLAN |
| Numerical evaluation of the anvil force for precise processing of the impact fracture test data | |
| I. V. ROKACH |
| Numerical method for predicting the growth of a crack in elastic-plastic material under fatigue loading | |
| N. RECHO, X.B. ZHANG, T. MORO |
| Numerical methods in elasto-plastic fracture mechanics | |
| D. BAOUCH, A. VERGNE |
| Numerical modelling of crack growth in ductile damaging materials | |
| M. FEUCHT, H. BAASER, J. HOHE, D. GROSS |
| Numerical path independent integral in dynamics fracture mechanics | |
| M. ATTIGUI, C. PETIT |
| Numerical round robin on micromechanical models | |
| W. Brocks |
| Numerical simulation of damage in ceramic matrix composites based on the boundary element method | |
| H. MASCHKE, R. SCHÄUBLE, S. WAGNER |
| Numerical simulation of low cycle fatigue damage in multiphase materials | |
| T. MAGNIN. O. MADELAINE-DUPUICH, A. BATAILLE, J. STOLARZ |
| Observations on tearing instability in an aluminium alloy | |
| J.D.G. SUMPTER |
| On a functional description of non-local strength and fracture. Existance and uniqueness | |
| S.E. Mikhailov |
| On failure propagation in composite materials in compression, (three dimensional continual theory) | |
| A.N. GUZ |
| On stability loss of fibres in composite materials near the boundaries | |
| Y.N. LAPUSTA |
| On the effect of quasi-static loading rates upon the fracture toughness of ordinary structural steel | |
| M. Lorentzon, K. Eriksson |
| On the experimental realization of Mode II cracks | |
| D.N. Pazis |
| On the intrinsic character of the crack growth kinetics curve in environmentally-assisted cracking | |
| J. TORIBIO, V. KHARIN |
| On the simulation of ductile crack extension in Al/SiC metal matrix composites using damage models | |
| D. KLINGBEIL, F. REUSCH |
| On the temperature in dynamic crack surface ligaments | |
| P. NILSSON. P. STÂHLE, K.G. SUNDIN |
| On the thermo-visco-plastic instability for material failure under impact | |
| C.H. NGUYEN |
| On the use of dimensional analysis in fracture mechanics | |
| J. Setien, J. M. Varona |
| Optical microscopy and numerical simulations of interface fracture in cement-based materials | |
| A. VERVUURT, J.G.M. VAN MIER |
| Peculiarities of corrosion-erosion fracture of pipeline steel | |
| H.M. NYKYFORCHYN, O.T. TSYRULNYK, A.I. BASSARAB |
| Physical and mechanical modelling of time-dependent fracture | |
| B.Z. MARGOLIN, V.A. SHVETSOVA, A.G. GULENKO |
| Plastic strain distribution near a tip of a sharp V-notch in a power hardening material | |
| N.V. Kouzniak, H.P. Rossmanith, M.P. Scruk |
| Polycristalline plasticity and local approach of intergranular brittle fracture in A508 steel | |
| O.M.L. YAHYA, P. PILVIN, R. PIQUES |
| Postweld intergranular underclad cracking : formation mechanisms and fracture thoughness | |
| D. TIGGES, R. PIQUES |
| Prediction of the creep behaviour of a 21 Cr-llNi-0.17N steel based on constant stress creep tests | |
| E. GARIBOLDI, J. SCHWERTEL, H. STAMM |
| Probabilistic model of fatigue crack growth | |
| J. DREWNIAK, J. TOMASZEWSKI |
| Probabilistic modelling for the quantification of uncertainty in fracture data | |
| P L. WINDLE, R. MOSKOVIC |
| Quantitative fractographic analysis of ductile fracture of the low carbon steels | |
| W. DZIADUR |
| Relationship between grain size and strength for 3Y-TZP ceramics | |
| Y. ZHENG. D. YAN, L. GAO, Z. LU |
| Repeated fatigue failure of shaft of cableway | |
| R. KIESELBACH |
| Replacement of condensed silica fume by Rice husk ash for the production of high strength concrete | |
| D.H. DALHUISEN, P. STROEVEN. D.D. BUI, N.T. QUY |
| Rupther - An original experimental approach for plastic and creep failure study of RPV steel | |
| P. MONGABURE, C. SAINTE-CATHERINE, J. GOULVEN, J. DEVOS |
| Scaling characteristics of stochastic damage accumulation in brittle materials | |
| V. V. Silberschmidt |
| Scatter of a ferritic steel in the transition region analysed by Charpy tests and dynamic tensile tests | |
| W. BÔHME |
| SCC in hot water environment - comparison of SCC mechanisms of two bainitic steels | |
| A. BROZOVA, M. RUSCAK, D. LAUEROVA |
| Shielding effects and dislocation repositioning at cleavage crack growth | |
| P. Andersson, P. Stahle |
| Simple formula for stress near a crack tip in a hardening material | |
| R. I. Roche |
| Simulation of 3D ductile crack growth by the Gurson- Tvergaard-Needleman model | |
| S. HAO, W. BROCKS, J. HEERENS, D. HELLMANN |
| Simulation of the crack growth of 3D structures under fatigue in taking account of residual stresses | |
| H. Nguyen-Dand, M. Scibetta, B. Borlee |
| Single specimen methods to evaluate J-R-curves from instrumented Charpy tests : results of a round-robin | |
| W. BÖHME, H.J. SCHINDLER |
| Singularity fields of a crack meeting an inclined interface of two elastic materials and numerical results | |
| J. Li, X.B. Zhang, N. Recho |
| Small defects introduced by fabrication or service environment and the fatigue of aluminium alloys | |
| T.C. LINDLEY, K.J. NIX |
| Some effects of plasma treatment on wood fibers for composite production | |
| M. DJIPOROVIC, P. TODOROVIC, J. MILJKOV1C, M. ZLATANOVIC, R. BELOSEVAC |
| Some new aspects of fracture mechanics of polymers | |
| G.M. KERCH |
| Some observations of fracture surfaces of Fe-Si alloy single crystals | |
| R.R. NIKOLIC |
| Some observations on fatigue fracture of materials with surfaces hardened by laser and plasma nitridation | |
| P. MAZAL, I. DLOUHV |
| Spalling of aluminum alloy 7020-T6, experimental and theoretical analyses | |
| P.F. CHEVRIER, J. KLEPACZKO |
| Stability of the warm prestressing effect under subsequent loading | |
| V.Y. PODKOLZIN, P.V. YASNIY |
| Statistical modelling of the ductile-brittle transition of ferritic steels | |
| S. RENEVEY, S. CARASSOU, B. MARINI, C. ERIPRET, A. PINEAU |
| Steady state analysis of an array of semi-infinite edge cracks in a transformation toughening ceramic | |
| J.H. Andreasen, B.L. Karihaloo |
| Stochastic modeling of fatigue damage processes in metals | |
| K. DOLINSKI |
| Stress corrosion cracking of copper single crystals : experiments and numerical modelling | |
| J.P. CHATEAU, B. BAYLE, T. MAGNIN |
| Stress intensity factor, compliance and inverse compliance formula for three-point bend specimens | |
| J.Y. Pasto, G. V. Guinea, J. Planas, M. Elices |
| Structural integrity assessment via the unified theory of fracture in tension and/or compression | |
| V P. NAUMENKO |
| Surface fatigue : a comparison between Zr-02 and CaF2 | |
| M.O. GUILLOU, C. MAERKY, J.L. HENSHALL, R.M. HOOPER |
| Sustained loading effects in austenitic 316 steel | |
| G. WARDLE, R.P. BIRKETT, P. J. BUDDEN |
| Temperature influence of fracture toughness Klv for two thermoresisting steels | |
| P. TRIPA, C. CRISTIJINEA |
| The solid particle impact erosion of brittle solids | |
| N.F. MOROZOV, Y.V. PETROV |
| The analysis of heat-affected-zone properties of micro alloyed steels | |
| K. GERIC, S. SEDMAK |
| The characterization of mixed-mode crack tip loading by near-field displacements on damage mechanics models | |
| H. AMSTUTZ, T. SEEGER |
| The damage mechanisms in rubber toughened PMMA | |
| R. SCHIRRER, C. FOND |
| The derivation of materials properties data from small scale punch tests | |
| D M. SHUTER. J. DUTTON, W. GEARY |
| The effect of cyclic thermal stress on crack propagation in cylindrical stainless steel components | |
| M. P. O'DONNELL, R.C. HURST, D. TAYLOR |
| The effect of non-spherical void shape on the evolution of ductile damage | |
| O P. SOVIK |
| The effect of strain rate and temperature on the impact behaviour of automobile coatings | |
| N.N. DIOH, F. MARTINATTI, J.G. WILLIAMS |
| The effect of strain rate on the J-R curve of Polyethylene | |
| A.J. den HERDER, A.C. RIEMSLAO, A. BAKKER |
| The European round-robin test on dynamic JIC and J-R curve determination | |
| H. MACGILLIVRAY, G.B. LENKEY |
| The evolution of damage at Cyclic Loading | |
| S. SAHN. V.B. PHAM, M. SCHAPER, A. BOHM, T. HAMERNIK |
| The influence of kinetic processes and medium degassing on crack growth | |
| R.V. GOLDSTEIN, A.V. BALUEVA |
| The influence of surface treatments on the hertzian impact damage of glass | |
| A. BALL |
| The information content of quantities that describe surface crack patterns | |
| H. RIESCH-OPPERMANN, T. WINKLER, E. K. LLIG, A. BRUCKNER-FOIT |
| The loss of stability and failure of pre-stressed constructions under temperature effect | |
| S.E. ALEXANDROV, N. CHIKANOVA |
| The metals degradation in hydrogen atmosphere at the plastic strain | |
| A.V. FISHGOIT |
| The nature of fracture in solids | |
| V.P. Kisel |
| The physical evaluation of the T* integral | |
| C.A. WALKER, P.M. MACKENZIE, F. GRIMAUD, F. HARDEL, T. ROLAND |
| The threshold of stress intensity range in aluminum alloys | |
| R. PIPPAN |
| The use circumferentially-cracked bars for the measurement of fracture toughness | |
| A H. SHERRY, B.K. NEALE, G. GAGE, D.J. SANDERSON |
| The use of the ring-crack-specimen | |
| M. KRUGER, R. KIENZLER |
| The VTT method for assessment of fracture resistance for structural steels from small material samples | |
| K. WALLIN, R. RINTAMAA, M. VALO, T. PLANMAN, M. NEVALA1NEN |
| Theoretical background for the fatigue cracks kinetics simulation | |
| N.V. TUMANOV |
| Thermal shock experiments on cracked cladded plates | |
| L. HODULAK, J.G. BLAUEL, I. SIEGELE, B. URICH |
| Thermodynamic analysis and modelling of grain-boundary void growth under high temperature | |
| I. D. SKRYPNYK, A H. NYKYFORCHYN |
| Thermomechanical approach of running discontinuities | |
| R.-M. Pradeilles Duval, C. Stolz |
| Three-dimensional axisymmetric vibrations of anisotropic laminated cylinders | |
| M. SHAKERI, S. FARIBORZ, M.H. YAS |
| Time dependence of microplastic deformation of molybdenum at low temperatures | |
| D.L. CHEN, B. WEISS, R. STICKLER |
| To the question of evaluation of crack growth resistance of structural materials under dynamic loading (DSJF) | |
| V.V. PANASYUK, O.E. ANDREYKIV, Z.T. NAZARCHUK, S.Ye. KOVCHYK, I.V. KHODAN |
| Toughness degradation of two sets of Cr-Mo steel high temperature turbine bolts | |
| J.H. BULLOCH |
| Treatment of mis-match weld data | |
| G. WARDLE, R.P. BIRKETT, B K. NEALE |
| Two-parameter fracture assessment of through-thickness cracks in an aluminium bridge structure | |
| B.S. HENRY, A.R. LUXMOORE |
| Uncoupled dynamic fracture approach | |
| J.C.W. VAN VROONHOVEN |
| Validation of simplified fracture mechanics methods by testing of real components | |
| G. BARTHOLOME, G. SENSKI, R. WELLEIN |
| Waveform and waiting time effects on the fatigue behaviour of reinforced polyamides and acetals | |
| J.A. CASADO, F. GUTIERREZ-SOLANA, J.A. POLANCO |