General Papers
2D and 3D Simulation of Ductile Crack Propagation by Plastic Collapse of Micro-ligaments | |
Geralf Hütter, Lutz Zybell, Uwe Mühlich, Meinhard Kuna |
Acoustic and Magnetoacoustic Emission during Deformation of Steel | |
Bohdan Klym, Valentin Skalsky, Roman Basarab, Sviatoslav Hirnyj |
An experimental study of the disc-jaw relative displacement along the contact length in a standardized Brazilian disc test using 3D DIC | |
Stavros Kourkoulis, Evangelia Ganniari-Papageorgiou, Panagiotis Chatzistergos, Christos Markides |
An Experimentally Based Characterization of Solar Cell Structure Defects by Means of Noise and Optical Activities Analysis | |
Robert Macku, Pavel Koktavy |
Analysis of some calculation factors effect on the fracture resistance assessment for NPP main equipment elements | |
Valeriy Kharchenko, A.Yu. Chirkov, S.V. Kobelsky, Viktor Kravchenko |
Analytical Solution of the Crack Problem for the Inhomogeneous Materials Taking into Account the Independent Changes, as the Elastic modulus and Poisson's ratio | |
Irina Trubchik, Sergey Aizikovich, Leonid Krenev |
Assessment of Fracture Mechanical Characteristics Including Welding Residual Stress at the Weld of Ni base Super Alloy 617 | |
Young Su Park, Tae Kyun Kim, Dong Ho Bae |
Characterization of the Different Stages of Damage Evolution and Crack Growth in Pure Nickel during Ultrasonic Fatigue | |
Martina Zimmermann, Anton Kolyshkin, Hans-Jürgen Christ |
Characterization of the microstructure, strain rate dependent material and fracture toughness behavior of a high strength Fe85Cr4Mo4.9V2.1W2.7C1.4 steel | |
Markus Ruessel, Stefan Martin, Lutz Krüger, Wolfgang Kreuzer |
Chessboard-like buckling modes of plates on elastic foundation | |
Stanislava Kashtanova, Nikita Fedorovich Morozov, Petr Evgen'evich Tovstik |
Consideration on the mechanisms causing reduction in fretting fatigue strength by hydrogen | |
Masanobu Kubota, Ryosuke Komoda, Jader Furtado |
Construction of Diagrams for Quasi-brittle and Quasi-ductile Fracture of Materials Based on Necessary and Sufficient Criteria | |
Vladimir Kurguzov, Vladimir Kornev |
Crack propagation peculiarities in steels at Charpy and disc-shaped specimens tests | |
Valeriy Kharchenko, Evgeniy Kondryakov, A. Panasenko |
Damage and fracture under dynamic loading on the example of a model space nuclear powerplant | |
Evgeny Kraus, Ivan Shabalin |
Defect tolerance of brazed steel components under quasi-static and cyclic loading | |
Michael Koster, Adrian Lis, Hans-Jakob Schindler, Christian Leinenbach |
Deformation and Fracture of Crosslinked Polystyrene particles | |
Jianying He, Zhiliang Zhang, H. Kristiansen |
Delamination of the Soft Coatings of Complicated Structure from the Hard Substrate Caused by Torsion or Indentation | |
Sergey Aizikovich, Leonid Krenev, Andrey Vasiliev, Sergey Volkov |
Development of fatigue damage in ultrafine-grained copper | |
Lucie Navrátilová, Ludvík Kunz |
Development of ideas about graded nature of material deformation affected by network of thermal fatigue cracks | |
Sergey Panin, Pavlo Maruschak, Pavel Lyubutin, Igor Konovalenko |
Diffusive Hydrogen Distribution Simulation on Microstructure Scale in High Strength Weld Metal Containing Retained Austenite | |
Yoshiki Mikami, Noriyoshi Kubota, Masahito Mochizuki |
Discrete simulation of defect flows and fragmentation of 2D interfaces under contact interaction | |
Dmitry Moiseenko, Sergey Panin, Elena Iriskina, Pavel Maksimov, Stanislav Kupriyanov, Irina Goryacheva |
Effect of corrosion exposure on the tensile mechanical properties of aluminum alloy 2024 electron beam welds | |
Nikolaos Alexopoulos, Panagiotis Skarvelis, Stavros Kalogeropoulos, Alexandra Karanika, Vasilis Stergiou |
Effect of triaxial stress state produced by notches on the directionality of hydrogen diffusion | |
Jesus Toribio, D. Vergara, M. Lorenzo, V. Kharin |
Effects of Notch Root Radius and Stress Ratio on the Fatigue Crack Propagation Threshold for the Short Crack at Notch Root | |
Akimitsu Seo, Masanobu Kubota, Yoshiyuki Kondo |
Electromagnetic effects in loaded marble | |
Alexander Zakupin, Virginia Mubassarova, Boris Borovsky, G.S. Kachesova |
Evaluation of joint defects on FSW of Mg alloy using statistical method | |
Takuya Kinoshita, K. Hayashi, Shigeru Hamada, I. Shigematsu, Hiroshi Noguchi |
Evaluation of the Cumulative Fatigue Damage on the Spot Welded Joints using 590 MPa-class Steel under Random Loading Conditions | |
Ryota Tanegashima, Hiroyuki Akebono, Masahiko Kato, Atsushi Sugeta |
Experimental and numerical investigation of fracturing mechanism in concrete using deflagration agent | |
Kazuma Moriya, Daisuke Fukuda, Katsuhiko Kaneko, Katsuya Sasaki, Ryo Sakamoto |
Experimental Characterization of the Threshold- and Fatigue Crack Growth Behaviour Regarding Negative Stress Ratios | |
Viktor Kloster, Hans Albert Richard, Gunter Kullmer |
Experimental determination of the critical COD of rock-like materials using Digital Image Correlation | |
Stavros Kourkoulis, Ermioni Pasiou |
Experimental und numerical investigations of ductile failure behavior in the ferritic steel | |
Pawel Kucharczyk, Sebastian Münstermann |
Fatigue Improvement of Welded Joints by Ultrasonic Impact Treatment (#149) | |
Yuri Kudryavtsev |
Forming Limits of Metal Sheets and Tubes: Analysis Method and Experimental Validation | |
Toshihiko Kuwabara, Kengo Yoshida |
Fracture mechanisms and structural integrity assessment of equipments for NPP with different types of reactors | |
George Karzov, Boris Margolin |
Fracture Toughness of Sharply Notched Specimens in the Ductile-to-Brittle Transition Regime of Ferritic Steel | |
Hans-Jakob Schindler, Dietmar Kalkhof, Hans-Werner Viehrig |
High-rate deformation and fracture under extreme conditions | |
Vladimir E. Fortov, Gennady I. Kanel |
Hydrogen induced stress cracking in heterogeneous materials | |
Guocai Chai, R. Lin Peng, Sten Johansson, U. Kivisäkk |
Identification of Micro-scale Defects in Crystalline Solar Cell Structure | |
Jiri Sicner, Pavel Koktavy |
Impact and nonlinear analysis for highly loaded airframes | |
Sergey Kravchenko, Kirill Zhidyaev, Sergo Dadunashvili |
Impact Toughness and Fracture Mechanisms Nanostructured Materials with BCC, HCP and FCC Lattice Structure in a Wide Temperature Range | |
Natal'ya Klevtsova, R.Z. Valiev, G.V. Klevtsov, I.P. Semenova, R.L. Islamgaliev, M.R. Kashapov |
Increase of fatigue strength of 12Cr1MoV steel by surface nanostructuring with Zr+ ion beam | |
Sergey Panin, Ilya Vlasov, Victor Sergeev, Alfred Sungatulin, Mark Kalashnikov, Victor Panin |
Influence of Al-Cr diffusion coating on low cycle fatigue behavior of cast nickel-base superalloy at 800 °C | |
Karel Obrtlík, Simona Pospíšilová, Martin Juliš, Tomáš Podrábský, Tomáš Kruml |
Influence of Graphite Morphology on the Fatigue Behaviour of Nodular Cast Iron | |
Predrag Canzar, Zdenko Tonkovic, Ante Baki?, Janos Kodvanj |
Influence of the inlet die angle on the hydrogen embrittlement of cold drawn prestressing wires | |
Jesus Toribio, M. Lorenzo, D. Vergara, V. Kharin |
Investigation of the conditions of strong compact fracture | |
Andrey Buzyurkin, Evgeny Kraus, Yaroslav Lukyanov |
Mechanical comparison of two types of fixation for Ludloff Oblique First Metatarsal Osteotomy under cyclic loading | |
Athanasios Mitousoudis, Panagiotis Chatzistergos, Emmanouil Stamatis, Stavros Kourkoulis |
Mechanics of Small Cracks in Estimation of Endurance Limits | |
Gregory Khazhinsky |
Mechanisms of Degradation and Brittle Fracture of Reactor Pressure Vessel Steels Under Longterm Operation | |
Ya. I. Shtrombach, Boris Gurovich, Evgenia Kuleshova, D.A. Maltsev, S.V. Fedotova, A.S. Frolov |
Modelling of Penny-Shaped Crack growth in Axisymmetric FGM with Residual Stresses | |
Alexander Galybin, Leonid Krenev, Sergey Aizikovich |
Molecular Mechanics Simulation of Buckling of Single-Walled Carbon Nanotubes | |
Sergey Korobeynikov, Vladimir Alyokhin, Alexey Babichev |
Multilevel approach to description of deformation and fracture of brittle media with hierarchical porous structure on the basis of movable cellular automaton method | |
Igor Konovalenko, Alexey Smolin, Sergey Psakhie |
New ideas for the development of damage resistant materials and structures | |
Otmar Kolednik |
New micromechanism of fracture in polymeric composites materials | |
E. Kablov, V. Litvinov, Ivan Deev, Petr Belov, L. Kobetz |
On fracture toughness of polyurethane foams | |
Liviu Marsavina, Emanoil Linul, Tomasz Sadowski, Dan Mihai Constantinescu, Marcin Knec, Dragos-Alexandru Apostol |
Phase transformations and spall fractures of high-purity cerium under explosive loading | |
Evgeny Kozlov, V. Tarzhanov, I. Telichko, D.G. Pankratov, G. Gray, M. Zocher |
Prediction of corrosion in reinforced concrete structures | |
Rachid Mehaddene, Mohamed Kadri |
Procedure of accelerated irradiation results usage for prediction of the material state corresponding to long-term operation of the reactor pressure vessel | |
Dmitry Erak, Boris Gurovich, Evgenia Kuleshova, Ya. Shtrombakh, O. Zabusov, Denis Zhurko |
Quasi-Brittle Fracture Diagrams under Low-Cycle Fatigue (Double-Frequency and Unsteady Loadings) | |
Vladimir Kornev |
Reactor pressure Vessel Steel Embrittlement Under the combined Action of Neutron Field and Hydrogen | |
Evgeny Krasikov, A.D. Amajev |
Relation between structural disorder and fracture mechanisms in an alkali borosilicate glass : a molecular dynamics study | |
Le-Hai Kieu, Jean-marc Delaye, Richard Caraballo, Mikael Gennisson, claude Stolz |
Simulation of crack propagation using hybrid Trefftz method based on a strip-yield crack-tip plasticity model for automotive crash applications | |
Karlheinz Kunter, Thomas Heubrandtner, Reinhard Pippan |
Small fatigue crack growth in the ODS Eurofer steel | |
Ivo Kubena, Tomáš Kruml |
Sound Velocities and Shear Strength of Shocked U within 10-250 GPa | |
Evgeny Kozlov, D.G. Pankratov, O.V. Tkachyov, A.K. Yakunin |
Space distribution of damage at early stage of spall fracture in copper | |
I.N. Kondrokhina, Olga Ignatova, A.M. Podurets, Andru Malyshev |
Strength analysis of structures made of high-filled polymer materials: constitutive equations, methods of boundary value problems solving, account for strain concentration | |
Dmitriy Bykov, Dmitriy Konovalov, Vladimir Peleshko |
Strength factors for glass foam | |
Olga Kazmina, Boris Semukhin, A.V. Mukhortova |
Structural-Continual Approach in Fracture Mechanics | |
Arseny Kashtanov |
System MAE-1L for Magnetoacoustic Emission Diagnostics of Structural Materials | |
Yevhen Pochapskyy, Sviatoslav Hirnyj, Bohdan Klym, Valentin Skalsky, Sergey Builo |
The Effect of Ferrite Embrittlement in Duplex Steel on Fatigue Crack Propagation from the Low (LCF) to the Very High Cycle Fatigue (VHCF) Regime | |
Maria Cecilia Marinelli, Alexander Giertler, Jitendra Sahu, Iris Alvarez, Ulrich Krupp |
The effect of multiple isothermal forging on the structure and mechanical properties of low carbon steel 12GBA and on the fracture process and its characteristics | |
Antonina Gordienko, Lyudmila Derevyagina, Alexander Korznikov, Lyudmila Zatochnaya, Ilfat Safarov |
The experimental and numerical study of elastic-plastic deformation processes, limit states and failure of the structure elements of under the monotonic static and dynamic loading | |
Valentin Bazhenov, Alexander Kibets, Sergey Osetrov, Elena Pavlyonkova, Anastasiya Artemyeva |
The modelling of splitting destruction of barriers from anisotropic materials in 3D | |
Marina Krivosheina, Maria Kozlova, Helen Tuch, Sergey Kobenko |
The Spall Strength and Hugoniot Elastic Limit of Tantalum with Various Grain Size. | |
Sergey Razorenov, Gennady Garkushin, Gennady I. Kanel, Olga Ignatova |
The standardized Brazilian disc test as a contact problem: Quantifying the friction at the disc-jaw interface | |
Stavros Kourkoulis, Christos Markides, John Hemsley |
Ultrasonic Measurement of Residual Stresses in Welded Elements and Structures | |
Yuri Kudryavtsev, Jacob Kleiman |
Uncertainties in T0 and Corresponding Safety Margins in Lower Bounds of K1c in the Ductile-to-Brittle Transition Regime of Ferritic Steels | |
Dietmar Kalkhof, Hans-Jakob Schindler |
Use of Electromagnetic and Acoustic Emission in Failure Monitoring of Cementitious Composites | |
Tomas Trcka, Bohumil Koktavy |
Useful Lifetime Evaluation and Prediction for Automotive Rubber Mount | |
Chang Su Woo, Hyunsung Park, Kyung Sik Kim, Ju Ho Choi |
Wrinkling-induced fracture of biological membranes under stress | |
Lev Panin, Alexey Panin, Pavel Mokrushnikov, Anna Khokhlova |
XRDD Observation of the Silicate Composite During Loading Experiment | |
Daniel Vavrik, Tomáš Fíla, Ivan Jandejsek, Václav Veselý, Petr Frantík, Zbyn?k Keršner |