General Papers
| A Numerical Analyse of Plane Crack in Strain Gradient for Fracture Prediction in Brittle Material | |
| Thi Thanh Thao Pham, Jia Li, Radhi Abdelmoula |
| A Regression Model for Statistical Assessment of Fatigue Strain- and Stress Lifetimes | |
| Alfonso Fernández-Canteli, Enrique Castillo, Manuel López-Aenlle, Hernán Pinto |
| About Unambiguity and Reliability of the Solution for Plastic Zone Magnitude around Crack Tip in Isotropic Strain-Hardening Material | |
| Dragan Pustaic, Martina Lovrenic-Jugovic |
| Bending Strength and Failure Behaviour of Welded Borosilicate Glass | |
| Fred Veer, Cecile Giezen, Freek Bos, Christian Louter, Ton Riemslag |
| Bending Strength of Annealed, Heat Strengthened and Fully Tempered Float Glass | |
| Fred Veer, Christian Louter, Ton Romein, H. van Ginkel, Ton Riemslag |
| Characterisation of Reactor Vessel Steels in the Brittle-Ductile Transition Region | |
| Thomas Linse, Meinhard Kuna |
| Characterization of the Fracture Behaviour of NBR and FKM Grade Elastomers for Oilfield Applications | |
| Zoltan Major, Reinhold W. Lang |
| Crack Closure Phenomenon in a Carbon Cast Steel with Practical Engineering Impacts | |
| Ivo ?erný, Václav Linhart |
| Crack Kinking out of an Interface, Influence of the T-stress | |
| Sébastien Murer, Dominique Leguillon |
| Delayed Cracking in a Metastable Austenitic Stainless Steel | |
| Petr Haušild, Philippe Pilvin, Michal Landa |
| Dwell-Fatigue Behavior of a Near Alpha-Ti 6242 Alloy | |
| Pierre Lefranc, Christine Sarrazin-Baudoux, M. Gerland, Véronique Doquet, Jean Petit |
| Dynamic and Static Characterization of Recent Crack Arrest Tests of Navy and Nuclear Steels | |
| James A. Joyce, R.E. Link, C. Roe, J. C. Sobotka |
| Environmentally Assisted “in-bulk” Steel Degradation of Long Term Service Gas Trunkline | |
| Hryhoriy Nykyforchyn, Ellina Lunarska, Maria Elena Gennaro, Giovanna Gabetta |
| Evaluation of Experiments on Semi-large Scale Specimens with Underclad Cracks with Focus on Constraint and RPV Integrity Evaluation | |
| Dana Lauerová, Vladislav Pištora |
| Evaluation of the Influence of Processing Conditions on the Peel Properties of PE-LD/iPB-1 Peel Systems | |
| Michael Nase, Beate Langer, Hans Joachim Baumann, Wolfgang Grellmann |
| Experimental and Numerical Study of Behaviour, Damage and Crack Propagation of PA6 | |
| Cedric Regrain, Lucien Laiarinandrasana, Sophie Toillon |
| Failure Analysis of Brittle Elastic Notched Structures Utilising Finite Fracture Mechanics Procedures | |
| Jochen Hebel, Wilfried Becker, Dominique Leguillon, Zohar Yosibash |
| Failure of Polyamide 11 using a Damage Finite Elements Model | |
| Guillaume Boisot, Christophe Fond, Gilles Hochstetter, Lucien Laiarinandrasana |
| Finite Element RCC-MR Creep Analysis of Circumferentially Cracked Cylinders under Combined Residual Stress and Mechanical Load | |
| Yuebao Lei, David Dean |
| Fracture Analysis of NiTi Alloys by Finite Element Method | |
| Andrea Falvo, Franco Furgiuele, Alessandro Leonardi, Carmine Maletta |
| Fracture Behaviour and Defect Assessment of Brazed Steel Joints | |
| Christian Leinenbach, Hans-Jakob Schindler, Tanya Baser, Niklaus Rüttimann, Konrad Wegener |
| Fracture Behaviour of Phosphorus-doped Polycrystalline Fe-2.3%V Alloy | |
| Pavel Lej?ek, Jaroslav Pokluda, Pavel Šandera, Jana Horníková, Bohumil Vlach, Monika Jenko |
| Fracture Mechanics Assessment of Railway Axles Based on Experimental and Computational Investigations | |
| Michael Luke, Igor Varfolomeyev, Kai Lütkepohl, Alfons Esderts |
| Fracture Mechanics Concepts Applied on PVDF Polymeric Material Exhibiting Porosity, Time and Temperature Dependence | |
| Lucien Laiarinandrasana, Mélanie Lafarge, Gilles Hochstetter |
| Fracture of Ultrafine Grained Magnesium Alloy AZ31 under Superplastic Deformation Conditions | |
| Rimma Lapovok, Tim Williams, Yuri Estrin |
| Geometric Dependence of Fracture Criteria in AL2024 | |
| Simon Lewis, Mahmoud Mostafavi, Martyn Pavier, David Smith, Christopher Truman |
| High Cycle Fatigue of IN 713 LC | |
| Ludvík Kunz, Petr Lukáš, Rastislav Mintách, Radomila Kone?ná |
| Hydrogen Induced Cracking in Duplex 00H18N5M3S Stainless Steel | |
| Krystyna Lubli?ska, Andrzej Szummer, Krzysztof Jan Kurzyd?owski |
| Influence of the Geometry on the Essential Work of Fracture of Polypropylene Materials | |
| Ralf Lach, Thomas Koch, Sabine Seidler |
| Instability Analysis for a C(T) Specimen Undergoing Stable Crack Extension and the Crack Growth Law Concept | |
| Juan Donoso, John Landes |
| Investigation of Elastic and Strength Properties of Nanoobjects | |
| Olga Loboda, Galina Krohaleva |
| Investigation of Energy Balance in Metals under Cyclic Loading | |
| Oleg Plekhov, Ivan Panteleev, Vladimir Leontiev, Oleg Naimark |
| Localised Effects in Sandwich Structures – Load Response, Failure and Fatigue | |
| Ole T. Thomsen, Elena Bozhevolnaya, Anders Lyckegaard |
| Micromechanical Modelling of Multiple Fracture in Engineered Cementitious Composites | |
| Andrea Spagnoli, En-Hua Yang, Victor C. Li |
| Microstructure Based Upper Shelf Charpy Toughness Prediction of HSLA Steels | |
| Florian Thönnessen, Sebastian Münstermann, Wolfgang Bleck, Philippe Thibaux, Martin Liebeherr, Thomas Schramm |
| Modeling of S/N Curves for Flawed Materials in the VHCF Regime | |
| Andreas Leitgeb, Hans-Peter Gaenser, Wilfried Eichlseder |
| Performance Comparison of Railway Wheel in Terms of Fracture Mechanics and Flat Generation | |
| Seok Jin Kwon, Dong Hyung Lee, Jung Won Seo, Won Hee You |
| Periodic Set of the Interface Cracks with Contact Zones in an Anisotropic Bimaterial | |
| Sergei Kozinov, Volodymyr Loboda |
| Plastic Limit Loads for Idealized Branch Junctions under Combined Pressure and Bending | |
| Kuk-Hee Lee, Kang-Mook Ryu, Yun-Jae Kim, Kee Bong Yoon |
| Problems of Crystallization of B2-FeAl Based Alloys | |
| Jaromír Kope?ek, Karel Jurek, Vladimír Šíma, Pavel Lej?ek |
| Redundancy of Composite Glass Beams at Extreme Conditions | |
| Christian Louter, Fred Veer |
| Reliability Estimation for Structure under Fatigue Load Using Probability Theory and Fatigue Crack Growth Model | |
| Ouk Sub Lee, Dong Hyeok Kim, Hong Min Kim, Hye Bin Choi |
| Silicon Nitride Materials for Hot Working of High Strength Metal Wires | |
| Robert Danzer, Markus Lengauer |
| Size Effect on Strength and Lifetime Distributions of Quasibrittle Structures Implied by Interatomic Bond Break Activation | |
| Zdenek P. Bazant, Jia-Liang Le, Martin Z. Bazant |
| Temperature Dependence of Beremin-Model Parameters for RPV Steel | |
| Gyöngyvér B. Lenkey, Róbert Beleznai |
| The Role of Process Models, Flow Charts and Material Databases on the Structural Integrity of Transporting Steel Pipeline Systems | |
| János Lukács, Gyula Nagy, Imre Török |
| The Small Punch Test as a Tool for Basic Structural Integrity Assessments | |
| Roberto Lacalle, Javier García, José Alberto Álvarez, Federico Gutiérrez-Solana |
| Theoretical and Experimental Study of Nonequilibrium Structural-Scaling Transitions in Metals | |
| Vladimir Oborin, Yuriy Bayandin, Sergey Permyakov, Vladimir Leontiev, Oleg Naimark |
| Two Methods for Determination of Fatigue Crack Propagation Limit Curves and their Applicability for High Strength Steels | |
| János Lukács |