General Papers
| 3D Cellular Automata Finite Element Simulations of Cleavage Fracture Initiation in the Transition Region | |
| R. Cuamatzi-Melendez, J. R. Yates |
| 3-D Local Hybrid Method Based on Surface Displacement Measurement for Structural Health Monitoring | |
| Kenji Machida |
| 3D Cellular Automata Finite Element Simulations of Cleavage Fracture Initiation in the Transition Region | |
| Ruben Cuamatzi-Melendez, John Yates |
| 3-D Local Hybrid Method Based on Surface Displacement Measurement for Structural Health Monitoring | |
| Kenji Machida |
| 3D-Simulation of Ductile Cracking in Two-Phase Structural Steel with Heterogeneous Microstructure | |
| Mitsuru Ohata, Midori Suzuki, Anna Ui, Fumiyoshi Minami |
| 3D-Simulation of Ductile Cracking in Two-Phase Structural Steel with Heterogeneous Microstructure | |
| Mitsuru Ohata, Midori Suzuki, Anna Ui, Fumiyoshi Minami |
| A Consistent Anisotropic Brittle Damage Model Based on Growing Elliptical Microcracks | |
| Kianoush Molla-Abbasi, Henning Schütte |
| A Crack Growth Modelling in Materials with Heterogeneous Microstructure | |
| Vladislav Kozák, Ivo Dlouhý |
| A Discussion on Fracture Energy of Vertical Joint in Concrete | |
| Ayumi Satoh, Kanji Yamada, Satoru Ishiyama |
| A Mechanical Model of the Four-point End Notched Flexure (4ENF) Test Based on an Elastic-brittle Interface | |
| Stefano Bennati, Luca Taglialegne, Paolo S. Valvo |
| A Mechanistic Understanding of Stress Corrosion Cracking of Mg-Al Alloys | |
| Nicholas A. Winzer, A. Atrens, Wolfgang Dietzel, V. S. Raja, G. Song, K. U. Kainer |
| A Mode I Fracture Behaviour Analysis of Adhesively Bonded Joints | |
| Vincent Cooper, Alojz Ivankovic, Aleksandar Karac |
| A Modified Three Point Bend Specimen | |
| Kjell Eriksson |
| A New Look at Cleavage Crack Formation in Semi Brittle Materials | |
| Stephen Antolovich, Kip Findley |
| A New Method for Diagramming Fatigue Strength of Metals Based on the Equivalent Stress Ratio Parameter and Characterization of Fatigue Strength Diagrams | |
| Hiroshi Matsuno |
| A Numerical Analyse of Plane Crack in Strain Gradient for Fracture Prediction in Brittle Material | |
| Thi Thanh Thao Pham, Jia Li, Radhi Abdelmoula |
| A Plasticity-like Framework for Fracture Mechanics | |
| Alberto Salvadori |
| A Probabilistic Model to Simulate Slender Reinforced Concrete Columns using Quasi-Monte Carlo Methods within SSJ Technology | |
| Ronald Schwuchow |
| A Regression Model for Statistical Assessment of Fatigue Strain- and Stress Lifetimes | |
| Alfonso Fernández-Canteli, Enrique Castillo, Manuel López-Aenlle, Hernán Pinto |
| A Simple Prediction of the Theoretical Tensile Strength of Cubic Crystals based on the Shear Strength Calculations | |
| Miroslav ?erný, Jaroslav Pokluda |
| A Stedily Propagating Crack in Planar Quasicrystal with Fivefold Symmetry | |
| Enrico Radi, Paolo Maria Mariano |
| A Study of the Fracture Toughness on Hybrid Syntactic Foams | |
| José Ferreira, Carlos Capela, José Costa |
| A Study of the Mode I and Mode II Interlaminar Fracture of Carbon/epoxy Bi-directional Composites | |
| Paulo Reis, José Ferreira, Fernando Antunes, José Costa, Carlos Capela |
| About the Dependence between Exponent and Constant in the Paris Law for Fatigue Crack Growth Rate | |
| Jan Kohout |
| About Unambiguity and Reliability of the Solution for Plastic Zone Magnitude around Crack Tip in Isotropic Strain-Hardening Material | |
| Dragan Pustaic, Martina Lovrenic-Jugovic |
| An Analysis of Cutting and Machining using Fracture Mechanics Concepts | |
| Gordon Williams, Yatish Patel, Bamber R. K. Blackman |
| Analyses of Fatigue Behaviour of a Low-Carbon Steel In-Air and Corrosion Medium | |
| Aleksander Davidkov, Donka Angelova |
| Analysis of Fatigue Crack Propagation and Crack Shielding in Super Duplex Stainless Steel and its Welds | |
| Karel Sláme?ka, Guocai Chai, Jaroslav Pokluda |
| Analysis of Multiple Cracks in Thin Coating on Orthotropic Substrate | |
| Michal Kotoul, Tomáš Profant, Old?ich Ševe?ek |
| Analysis of the Behaviour of Crack Emanating From Microvoid in Cement of Reconstructed Acetabulum | |
| Bel Abbes Bachir Bouiadjra, Smail Benbarek, Mohamed Belhouari, Tarik Achour, Boualem Serier |
| Analysis of the Cyclic Stress Ahead of Short Cracks | |
| Mauro Madia |
| Analytical-numerical Hybrid Method to Determine the Stress Field in Front of the Crack in 3D Elastic-plastic Structural Element | |
| Andrzej Neimitz, Marcin Graba |
| Applicability of the Cohesive Model to Engineering Problems: on Parameter Identification for Ductile Materials | |
| Ingo Scheider, Norbert Huber, Karl-Heinz Schwalbe, Rajkumar Gurunathan |
| Assessment of Sub-Clad Flaw based on Finite Element Analyses | |
| Szabolcs Szávai, Róbert Beleznai, Tibor Köves |
| Automatic Diagnostic System for Fatigue Damage with Statistical F test | |
| Masataka Yatomi, Atushi Iwasaki, Tadashi Kimura |
| Behavior of Cracks in Cladded Components under Consideration of Residual Stresses | |
| Jörg Hohe, Marcus Brand, Dieter Siegele |
| Bending Strength and Failure Behaviour of Welded Borosilicate Glass | |
| Fred Veer, Cecile Giezen, Freek Bos, Christian Louter, Ton Riemslag |
| Bending Strength of Annealed, Heat Strengthened and Fully Tempered Float Glass | |
| Fred Veer, Christian Louter, Ton Romein, H. van Ginkel, Ton Riemslag |
| Bridged and Cohesive Crack Models for Fracture in Composite Material Systems | |
| Roberta Massabò |
| Cement-carbon Nanotubes Based Composite | |
| Giuseppe Ferro, Simone Musso, Alberto Tagliaferro, Jean-Marc Tulliani |
| Characterisation of Reactor Vessel Steels in the Brittle-Ductile Transition Region | |
| Thomas Linse, Meinhard Kuna |
| Characteristics of Internal Fatigue Fracture of Shot-Peened Spring Steels | |
| Maya Sugimoto, Kenji Kanazawa |
| Characterization of Mechanical Properties and Residual Stresses for Ni-Co Thin Films | |
| Joong-Hyuk Ahn, Hong-Ryul Bae, Yun-Jae Kim, Jun-Hyub Park |
| Characterization of the Cold Ductility Degradation after Aging of a Centrifugally Cast 20Cr32Ni+Nb Alloy | |
| Luis Monobe, Cláudio Schön |
| Characterization of the Fracture Behaviour of NBR and FKM Grade Elastomers for Oilfield Applications | |
| Zoltan Major, Reinhold W. Lang |
| Compression Precracking Methods to Generate Near-Threshold Fatigue-Crack-Growth-Rate Data | |
| James Newman, Y. Yamada |
| Computational Model for Load Capacity of Large Slewing Bearings | |
| Rok Poto?nik, Jože Flašker, Sre?ko Glodež |
| Computer Aided Optical Method For Aircraft's Components Fatigue Life Estimation | |
| Sergey Ignatovich, Michail Karuskevich, Tatijana Maslak |
| Cone Crack Development during Ball on the Three Balls Test | |
| Zden?k Chlup, Walter Harrer, Vladislav Kozák, Lukáš ?eho?ek |
| Constraint Effect in Tensile to Shear Type Transition | |
| Mahmoud Mostafavi, David Smith, Martyn Pavier |
| Constraint Effects in Creeping Solids under Biaxial Loading | |
| Valery Shlyannikov, Nataly Boychenko |
| Constraint Evaluation and Effects on J-R Resistance Curves for Pipes under Combined Load Conditions | |
| Sebastian Cravero, Richard Bravo, Hugo Ernst |
| Contact Materials for Structural Glass | |
| Bernhard Weller, Stefan Reich, Jan Ebert |
| Corrosion and Fracture of Ti Bioalloys | |
| Andrzej Zielinski, Sylwia Sobieszczyk |
| Corrosion, Fatigue and Corrosion Fatigue Behaviour of Metal Implant Materials, Especially Titanium Alloys | |
| Claudia Fleck |
| Corrosion-enhanced Fracture of the Cr-Ni-Mn Steel in Liquid Hydrocarbons | |
| Andrzej Zielinski, Beata Swieczko-Zurek |
| Crack Analysis in Magneto-electro-elastic Solids | |
| Jan Sládek, Vladimír Sládek, Peter Šolek |
| Crack Closure Phenomenon in a Carbon Cast Steel with Practical Engineering Impacts | |
| Ivo ?erný, Václav Linhart |
| Crack Induced Stress and Generation of Twins and Dislocations in bcc Iron | |
| Alena Spielmannová, Anna Machová |
| Crack Initiation at the Inclusions under Static Loading | |
| Victor Sylovanyuk, Roman Yukhym |
| Crack Initiation at Thin-film Edges with Weak Singularity | |
| Lingyun Shang, Zhiliang Zhang, Bjorn Skallerud |
| Crack Initiation Life of Notched Specimens | |
| Janina Menke, Manuela Sander, Hans A. Richard |
| Crack Kinking out of an Interface, Influence of the T-stress | |
| Sébastien Murer, Dominique Leguillon |
| Crack Opening and Crack Flank Displacements in the Prefracture Zone when Branching and Kinking | |
| Vladimir Kurguzov, Vladimir Kornev |
| Crack Propagation in Anisotropic Inhomogeneous 2-D-Structures | |
| Martin Steigemann, Markus Fulland, Maria Specovius-Neugebauer, Hans A. Richard |
| Creep Fracture Mechanisms in Selected Discontinuously Reinforced Magnesium Metal Matrix Composites | |
| Václav Skleni?ka, Kv?ta Kucha?ová, Milan Svoboda |
| Damage Analysis of Fibre-matrix System | |
| Jan Klusák, Zden?k Knésl |
| Damage Evolution on Different Scales | |
| Ludmila Botvina |
| Damaging Micromechanisms in a Ferritic Ductile Cast Iron | |
| Francesco Iacoviello, Ornella Di Bartolomeo, Vittorio Di Cocco, Valentino Piacente |
| DCB- and TENF-Specimens - Made of Textile Reinforced Wood | |
| Robert Putzger |
| Delayed Cracking in a Metastable Austenitic Stainless Steel | |
| Petr Haušild, Philippe Pilvin, Michal Landa |
| Determination of a Limit State of Elastic Solids with Thin-Walled Elastic Inclusions Using the J-integral | |
| Viktor Bozhydarnyk, Iaroslav Pasternak, Heorhiy Sulym |
| Determination of Low-Cycle Fatigue Parameters with Rotating Bending Test | |
| Marko Knez, Sre?ko Glodež, Janez Kramberger |
| Discrete Numerical Simulation of Fracture Propagation in Disordered Materials: Mesh Dependency | |
| Jan Eliáš, Miroslav Vo?echovský |
| Disturbance of Long-range Order and Single Crystal State under Plastic Deformation in Ni3Fe | |
| Svetlana Starenchenko, Vladimir Starenchenko, Irina Radchenko |
| Does Shear Deformability Influence the mode II Delamination of Laminated Beams? | |
| Paolo S. Valvo |
| Ductile Tearing Resistance of Metal Sheets | |
| Wolfgang Brocks, Paul Anuschewski, Ingo Scheider |
| Ductile-to-brittle Transition in Tensile Deformation of Particle Reinforced Metals | |
| Aude Hauert, Andreas Rossoll, Andreas Mortensen |
| Dwell-Fatigue Behavior of a Near Alpha-Ti 6242 Alloy | |
| Pierre Lefranc, Christine Sarrazin-Baudoux, M. Gerland, Véronique Doquet, Jean Petit |
| Dynamic and Static Characterization of Recent Crack Arrest Tests of Navy and Nuclear Steels | |
| James A. Joyce, R.E. Link, C. Roe, J. C. Sobotka |
| Dynamic Crack Propagation: an Experimental-Numerical Approach | |
| Jesus Mediavilla, Jaap Weerheijm, Ronald van der Meulen, F. Soetens, C. Wentze, J. van Deursen |
| Effect of Aging Treatment on Fatigue Behaviour in Extruded AZ61 and AZ80 Magnesium Alloys | |
| Yoshihiko Uematsu, Keiro Tokaji, Masahiro Matsumoto |
| Effect of an Atmospheric Pressure Plasma Surface Treatment and Humidity Levels on the Interfacial Fracture Toughness of Co-Cured Composite Joints | |
| Joseph Mohan, Darragh Carroll, Neal Murphy, Alojz Ivankovic, Denis Dowling |
| Effect of Hydrogen on Fatigue Crack Growth of Metals | |
| Yukitaka Murakami |
| Effect of Hydrogen on Mode II Fatigue Behavior of Bearing Steel under Cyclic Torsion with Compressive Mean Stress | |
| Shinji Fujita, Saburo Matsuoka, Yukitaka Murakami |
| Effect of Intercritical Annealing on Fracture Behaviour of 10GN2MFA Grade Steel | |
| Ladislav Kander, Karel Matocha, Aleš Kor?ák |
| Effect of Irradiation on Mechanical Properties of 15Ch2MFA Reactor Pressure Vessel Steel | |
| Št?pán Válek, Petr Haušild, Miloš Kytka |
| Effect of Notch Shape and Absorbed Hydrogen on the Fatigue Fracture below Fatigue Limit | |
| Yoshiyuki Kondo, Hikaru Eda, Masanobu Kubota |
| Effect of Particles Size and Density on Fracture Toughness of Polypropylene Particulate Composite | |
| Eva Nezbedová, Zden?k Knésl, Pavel Huta?, Zden?k Majer, Petr Veselý |
| Effect of Pressure on the Temperature of Brittle–Ductile Transition in bcc Crystals | |
| Arkadiy Dobromyslov, Ravil Churbaev |
| Effect of Prestrain on Ductility of a X100 Pipeline Steel | |
| Jacques Besson, Yasuhiro Shinohara, Thilo Morgeneyer, Yazid Madi |
| Effect of Specimen Thickness on Plastic Zone | |
| Shashidhar Kudari, Krishnaraja Kodancha |
| Effect of Temperature on the Cyclic Stress Components of Inconel 738LC Superalloy | |
| Martin Petrenec, Miroslav Šmíd, Karel Obrtlík, Jaroslav Polák |
| Effect of Variuos Drilling Procedures on Fatigue Life of Rivet Holes | |
| Mohamed Elajrami, Mohamed Benguediab, Ronald Guillen |
| Effects of Internal Hydrogen on Fatigue Strength of Commercially Pure Titanium | |
| Hideaki Nishikawa, Yasuji Oda, Hiroshi Noguchi |
| Effects of Tangential Strains and Shielding in Large Scale Yielding in Multi-Layered Architectures for Bearings | |
| Allan Burke-Veliz, Stavros Syngellakis, Philippa Reed |
| Elastic-Plastic Analysis of Cracks on Metal/Ceramic Joints | |
| Mohamed Belhouari, Bel Abbes Bachir Bouiadjra, Kacem Kaddouri, Kouider Madani |
| Electromagnetic Radiation Method for Identification of Multi-scale Fracture and Dynamic Parameters of thin Fibers | |
| Igor Simonov |
| Engineering Methods for Stress Intensity Factor Calculation and their Practical Application | |
| Igor Orynyak |
| Enhancing Stress Corrosion Cracking Resistance in Al-Zn-Mg-Cu Alloy through Inhibiting Recrystallization | |
| M. Bobby Kannan, V. S. Raja |
| Environmental Effects upon Fatigue and Fracture Propagation of A1N Grade Railway Steel | |
| Stefano Beretta, Michele Carboni, A. Lo Conte |
| Environmentally Assisted “in-bulk” Steel Degradation of Long Term Service Gas Trunkline | |
| Hryhoriy Nykyforchyn, Ellina Lunarska, Maria Elena Gennaro, Giovanna Gabetta |
| ESIS TC5 European Round Robin on Dynamic Compression Testing | |
| Jan Džugan, Hugh MacGillivray, Uwe Mayer, Václav Mentl, Celia Watson |
| Estimation of Apparent Fracture Toughness of Ceramic Laminates Based on Generalized Strain Energy Density Factor | |
| Luboš Náhlík, Lucie Šestáková, Pavel Huta? |
| Evaluation of Experiments on Semi-large Scale Specimens with Underclad Cracks with Focus on Constraint and RPV Integrity Evaluation | |
| Dana Lauerová, Vladislav Pištora |
| Evaluation of Hydrogen Resistance of 18Mn-18Cr Stainless Steels and its Welding Joining by Fracture Mechanics Approaches | |
| Alexander Balitskii |
| Evaluation of Mechanical Properties of Composite Ni Base Coatings using Small Punch Test Method | |
| Ladislav Kander, David Mikuláš, František Kristofory |
| Evaluation of the Influence of Processing Conditions on the Peel Properties of PE-LD/iPB-1 Peel Systems | |
| Michael Nase, Beate Langer, Hans Joachim Baumann, Wolfgang Grellmann |
| Evaluation of Toughness Anisotropy on Doped PZT Ceramics as a Function of Load and Temperature | |
| Raúl Bermejo, Hannes Grünbichler, Josef Kreith, Robert Danzer |
| Experimental and Numerical Study of Behaviour, Damage and Crack Propagation of PA6 | |
| Cedric Regrain, Lucien Laiarinandrasana, Sophie Toillon |
| Experimental Determination of J-integral at Elevated Temperatures | |
| Ljubica Milovic, Milorad Zrilic, Stojan Sedmak, Aleksandar Sedmak, Meri Burzic |
| Experimental Study of Mechanically Stressed Composite Materials | |
| Pavel Koktavý, Bohumil Koktavý |
| Fabrication and Fatigue Behavior Study of Metal Matrix Composite AA6063 /MgO | |
| Mohamed Abdel-Aziz, T. S. Mahmoud, A. M. Gaafer |
| Fabrication of Vertically Aligned Arrays of Metal Nanorods and Nanotubes by Template-Based Electrodeposition Method | |
| Marina Vorozhtsova, Kate?ina Klosová, Jaromír Hubálek |
| Failure Analysis of Brittle Elastic Notched Structures Utilising Finite Fracture Mechanics Procedures | |
| Jochen Hebel, Wilfried Becker, Dominique Leguillon, Zohar Yosibash |
| Failure Analysis of Two Sets of Aircraft Blades | |
| Elena Silveira, Garbi?e Atxaga, Angel M. Irisarri |
| Failure of Hydrided Zircaloy-4 Fuel Cladding Tubes under RIA Loading Conditions | |
| Matthieu Le Saux, Jacques Besson, Sébastien Carassou, Christophe Poussard, Xavier Averty |
| Failure of Polyamide 11 using a Damage Finite Elements Model | |
| Guillaume Boisot, Christophe Fond, Gilles Hochstetter, Lucien Laiarinandrasana |
| Failure of Sandwich Beams | |
| Emmanuel Gdoutos, I. M. Daniel |
| Fatigue and Fracture Behaviour of a Thin Aluminium Alloy Sheet | |
| Miraj M. Jan, Hans-Peter Gaenser, Wilfried Eichlseder |
| Fatigue Behavior and Fracture Mechanism of Al Alloy 7075-T6 under Ultrasonic Cycling Deformation | |
| Qiang Chen, Norio Kawagoishi, Gen Hashiguchi, M. Oki, Kazuhiro Kusukawa |
| Fatigue Behavior of High-chromium Alloyed Cold Work Tool Steel in the Gigacycle Regime | |
| Christian Sohar, Agnieszka Betzwar-Kotas, Christian Gierl, Brigitte Weiss, Herbert Danninger |
| Fatigue Behavior of Nodular Cast Iron after Gas Nitriding | |
| Radomila Kone?ná, Gianni Nicoletto, Viera Konstantová, Peter Jan?ovi? |
| Fatigue Behaviour of DLC Coated Magnesium Alloy in Laboratory Air and Demineralized Water | |
| Yoshihiko Uematsu, Keiro Tokaji, Hideaki Takekawa |
| Fatigue Behaviour of Ultrafine Grained Light Alloys | |
| Yuri Estrin, Alexei Vinogradov |
| Fatigue Characteristics of Bolted Joints under Transverse Vibration | |
| Shinji Hashimura |
| Fatigue Crack Growth - As a Macroscopic Damage Process | |
| László Tóth |
| Fatigue Crack Growth in the Vicinity of a Grain Boundary Modelled using a Discrete Dislocation Technique | |
| Per Hansson, Solveig Melin |
| Fatigue Crack Growth of Different Aluminum Alloy 2024 | |
| Mustapha Benachour, Mohamed Benguediab, Abdelhamid Hadjoui, Nadjia Benachour, Féthi Hadjoui |
| Fatigue Crack Growth Rate in Non-proportional Bending with Torsion Loading | |
| Dariusz Rozumek, Zbigniew Marciniak, Ewald Macha |
| Fatigue Crack Growth Rate in the Cruciform Specimens under Proportional Tension-Compression | |
| Dariusz Rozumek |
| Fatigue Crack Propagation Micromechanisms in a Ferritic and in a Ferritic-pearlitic Ductile Cast Iron | |
| Francesco Iacoviello, Vittorio Di Cocco, Francesca Franzese |
| Fatigue Crack Propagation Micromechanisms in High Temperature Embrittled Duplex Stainless Steels | |
| Francesco Iacoviello, Vittorio Di Cocco, Ester Franzese, Stefano Natali |
| Fatigue Damage in Copper Polycrystals Subjected to Ultrahigh-cycle Fatigue below the PSB Threshold | |
| Anja Weidner, Dorothea Amberger, Florian Pyczak, Bernd Schönbauer, Stefanie Stanzl-Tschegg, Haël Mughrabi |
| Fatigue Fracture and Damage of Engineering Polymers | |
| Keisuke Ishikawa, Yasuo Kobayashi |
| Fatigue Fracture of Materials in the Region of Solids Cyclic Contact | |
| Volodymyr Panasyuk, Olexandra Datsyshyn |
| Fatigue in PMMA: the Effect of Notches and Pores Predicted using the TCD | |
| David Hoey, Peter O'Reilly, David Taylor |
| Fatigue Life Analysis of Damaged Structural Component using Strain Energy Density Method | |
| Stevan Maksimovic, Slobodanka Boljanovic, Vladimir Orovic, Milorad Komnenovic |
| Fatigue Life Assessment of Structural Component with a Non-uniform Stress Distribution Based on a Probabilistic Approach | |
| Aleksander Karolczuk, Thierry Palin-Luc |
| Fatigue Reinforcement in Natural Rubber Containing Carbon Black Fillers | |
| Jean-Yves Rouvière, Jacques Besson, Sabine Cantournet |
| Fatigue Strength for Shallow Defects under Torsion | |
| Stefano Beretta, Khaydar Valiullin |
| Fatigue Strength of Small-Defect-Containing Specimens under Combined Loading Involving Phase Difference and Mean Stress | |
| Masahiro Endo, Isao Ishimoto, Ken-ichi Iseda, Yuki Sakamoto |
| Fatigue Strength Reduction of Notched Component in Hydrogen Gas after Multiple Overloading | |
| Masanobu Kubota, Junichiro Yamaguchi, Yoshiyuki Kondo |
| Fatique Properties of AISI 316 Grade Steel after ECAP Technology | |
| Ladislav Kander, Miroslav Gréger |
| FEM Model of the Low-Cycle Damage at the Fatigue Crack Tip | |
| Aleš Materna, Vladislav Oliva |
| Finite Element Modeling of Plain Weave Composites for Flexural Failure | |
| Omer Soykasap |
| Finite Element RCC-MR Creep Analysis of Circumferentially Cracked Cylinders under Combined Residual Stress and Mechanical Load | |
| Yuebao Lei, David Dean |
| Fractographical Analysis of Fish-eye Formation under Multiaxial Fatigue | |
| Št?pán Major, Karel Sláme?ka, Marta Kianicová, Jaroslav Pokluda |
| Fracture Analysis of NiTi Alloys by Finite Element Method | |
| Andrea Falvo, Franco Furgiuele, Alessandro Leonardi, Carmine Maletta |
| Fracture Behavior of EUROFER´97 Steel After Thermal Ageing | |
| Hynek Hadraba, Ivo Dlouhý |
| Fracture Behaviour and Defect Assessment of Brazed Steel Joints | |
| Christian Leinenbach, Hans-Jakob Schindler, Tanya Baser, Niklaus Rüttimann, Konrad Wegener |
| Fracture Behaviour of Phosphorus-doped Polycrystalline Fe-2.3%V Alloy | |
| Pavel Lej?ek, Jaroslav Pokluda, Pavel Šandera, Jana Horníková, Bohumil Vlach, Monika Jenko |
| Fracture Evolution in Small Punch Tests under Constant Deflection Rate Conditions | |
| Petr Dymá?ek, Karel Mili?ka, Vojt?ch Hrubý |
| Fracture Mechanical Investigations of Polymeric Nanocomposites | |
| Andrea Monami, Katrin Reincke, Wolfgang Grellmann, Bernd Kretzschmar |
| Fracture Mechanics Assessment of Railway Axles Based on Experimental and Computational Investigations | |
| Michael Luke, Igor Varfolomeyev, Kai Lütkepohl, Alfons Esderts |
| Fracture Mechanics Concepts Applied on PVDF Polymeric Material Exhibiting Porosity, Time and Temperature Dependence | |
| Lucien Laiarinandrasana, Mélanie Lafarge, Gilles Hochstetter |
| Fracture of Conductive Ceramic Thin Film on Polymer Substrate in Opto-electric Devices | |
| Masaki Omiya |
| Fracture of Ultrafine Grained Magnesium Alloy AZ31 under Superplastic Deformation Conditions | |
| Rimma Lapovok, Tim Williams, Yuri Estrin |
| Fracture Process Zone Size and Energy Dissipated during Crack Propagation in Quasi-brittle Materials | |
| Ladislav ?outil, Václav Veselý, Zbyn?k Keršner, Stanislav Seitl, Zden?k Knésl |
| Fracture Surface Analysis of Elastomers | |
| Thomas Horst, Katrin Reincke, Gert Heinrich, Wolfgang Grellmann |
| Fracture Toughness and Fracture Surface Morphology of Cold Forging Die Steels | |
| Ryuichiro Ebara, Keisuke Takeda, Yasuo Ishibashi, Atsushi Ogura, Yasuyuki Kondo, Shinichi Hamaya |
| Fracturing of Brittle Materials in a Mixing Process with Water Jet | |
| Libor Hlavá?, Jaroslav Vašek, Irena Hlavá?ová, Petr Janda?ka, Vilém Mádr |
| From Nonlocal Damage to Fracture | |
| Milan Jirásek |
| Geometric Dependence of Fracture Criteria in AL2024 | |
| Simon Lewis, Mahmoud Mostafavi, Martyn Pavier, David Smith, Christopher Truman |
| Gigacycle Fatigue of Metallic Aircraft Components | |
| Claude Bathias, Paul C. Paris |
| Growth of Short Fatigue Cracks Emanating from Notches in a Two-phase Austenitic-Ferritic Stainless Steel | |
| Ond?ej Kotecký, Suzanne Degallaix, Jaroslav Polák |
| High Cycle Fatigue of IN 713 LC | |
| Ludvík Kunz, Petr Lukáš, Rastislav Mintách, Radomila Kone?ná |
| High Cycle Fatigue Property and Micro Crack Behaviors in Non-combustible Magnesium Alloy | |
| Yasuo Ochi, Kiyotaka Masaki, Toshifumi Kakiuchi, Takashi Matsumura, Yoshinobu Takigawa, Kenji Higashi |
| Hydrogen Effect on the Mechanical Properties and Fracture Mechanism of the Degraded Welded Joints from Steam Pipeline | |
| Oleksandra Student, Andriy Markov |
| Hydrogen Induced Cracking in Duplex 00H18N5M3S Stainless Steel | |
| Krystyna Lubli?ska, Andrzej Szummer, Krzysztof Jan Kurzyd?owski |
| Ideal Cleavage Process in Weakly Stable Systems | |
| Vaclav Paidar |
| Identifying Cracks in Gears Using Wavelet Analysis | |
| Aleš Belšak, Jože Flašker |
| Implementation of Damage Tolerance Concepts into Stress-Based Fatigue Dimensioning Guidelines | |
| Hans-Peter Gaenser, Juergen Froeschl, Wilfried Eichlseder |
| In Situ SEM/EBSD Analysis of Fatigue Crack Propagation Behavior of a Super Duplex Stainless Steel | |
| Guocai Chai, Ru Lin Peng, Karel Sláme?ka, Sten Johansson |
| Incubation Time Criteria for Fracture and Structural Transformations | |
| Yuri Petrov, Vladimir Bratov |
| Influence of Low-angle Grain Boundaries on Short Fatigue Crack Growth Studied by a Discrete Dislocation Method | |
| Christina Bjerkén, Solveig Melin |
| Influence of Microstructure and Stress on Short Intergranular Stress Corrosion Crack Growth in Austenitic Stainless Steel Type 304 | |
| Salaheddin Rahimi, Thomas J. Marrow |
| Influence of Pre-FPP (Fine Particle Peening) on Fatigue Fracture Mechanism of Nitrided AISI 4135 Steel | |
| Shoichi Kikuchi, Keita Ishii, Jun Komotori |
| Influence of the Geometry on the Essential Work of Fracture of Polypropylene Materials | |
| Ralf Lach, Thomas Koch, Sabine Seidler |
| Instability Analysis for a C(T) Specimen Undergoing Stable Crack Extension and the Crack Growth Law Concept | |
| Juan Donoso, John Landes |
| Investigation of Branching in Polycarbonate Due to Stress Corrosion | |
| Ulf Hejman, Christina Bjerkén |
| Investigation of Elastic and Strength Properties of Nanoobjects | |
| Olga Loboda, Galina Krohaleva |
| Investigation of Energy Balance in Metals under Cyclic Loading | |
| Oleg Plekhov, Ivan Panteleev, Vladimir Leontiev, Oleg Naimark |
| Investigations on Initiation and Growth of Fatigue Cracks | |
| Manuela Sander, Hans A. Richard, Janina Menke |
| Jump-like Crack Growth Models or Theory of Critical Distances. Are They Correct? | |
| Andrzej Neimitz |
| Kinetic Description of Dynamic Crack Propagation | |
| Arseny Kashtanov, Yuri Petrov, Leonid Isakov |
| Loading Rate Dependence of the Fracture Toughness of Polycrystalline Tungsten: Experiments and Modeling | |
| Daniel Rupp, Xiaohui Zeng, Sabine Weygand, Alexander Hartmaier |
| Localised Effects in Sandwich Structures – Load Response, Failure and Fatigue | |
| Ole T. Thomsen, Elena Bozhevolnaya, Anders Lyckegaard |
| Measurement of the Interfacial Shear Strength of a PEO Coated Aluminium Alloy | |
| Dave Asquith, Yee-Han Tai, C. X. Wong, John Yates, Allan Matthews, Aleksey Yerokhin |
| Mechanical Properties of the Cell Wall Material of Closed-cell Al Foam | |
| Insu Jeon, Kiyotaka Katou, Tsutomu Sonoda, Tadashi Asahina |
| Mechanical Strength of Nano-Elements | |
| Takayuki Kitamura, Hiroyuki Hirakata, Takashi Sumigawa, Takahiro Shimada |
| Mechanisms of Fatigue Crack Initiation and Propagation in Hydro Pumps NP-89D of Aircraft Tu-154M of Cast Aluminum Alloy AL5 | |
| Andrey Shanyavskiy, Alexandre Toushentsov |
| Mechanisms of Fatigue Crack Initiation Subsurface and Growth of the Surface Hardened Titanium Alloy Ti-6Al-3Mo-0.4Si | |
| Andrey Shanyavskiy, Tatiana Zaharova, Yuriy Potapenko, Maxim Artamonov |
| Mechanisms of Strain Localization, Crack Initiation and Fracture of Polycrystalline Copper in the VHCF-Regime | |
| Stefanie Stanzl-Tschegg, Bernd Schönbauer |
| Mesomechanics of Multiple Cracking of Nanostructured Gradient Coatings under Loading | |
| Sergey Panin, Victor Panin, Alexey Panin, Victor Sergeev, Evgenii Evtushenko, Dmitrii Moiseenko |
| Methods for Introducing Pre-Cracks in Fracture Mechanics Testing of Polymers | |
| Joelmir Souza, Fabiano Peres, Cláudio Schön |
| Micromechanical Modelling of Multiple Fracture in Engineered Cementitious Composites | |
| Andrea Spagnoli, En-Hua Yang, Victor C. Li |
| Microradiographic Observation of the Strain Field in Vicinity of the Crack Tip | |
| Daniel Vav?ík, Ivan Jandejsek, Jan Jak?bek, Martin Jak?bek, Tomáš Holý |
| Microscopic Deformation Behavior of Lamellar Pearlite Steel | |
| Yuu Sakoda, Suguru Kashiwagi, Shigeru Hamada, Hiroshi Noguchi |
| Microstructural Interpretation of Effective Fatigue Threshold of Structural Steel | |
| Jaroslav Pokluda, Yoshiyuki Kondo, Karel Sláme?ka, Vladislav Kozák, Jana Horníková, Pavel Šandera |
| Microstructure Based Upper Shelf Charpy Toughness Prediction of HSLA Steels | |
| Florian Thönnessen, Sebastian Münstermann, Wolfgang Bleck, Philippe Thibaux, Martin Liebeherr, Thomas Schramm |
| Microstructure Evolution in base Metal and Welded Joint of Grade 91 Martensitic Steels after Creep at 500-600°C | |
| Florian Vivier, Clara Panait, Anne-Françoise Gourgues-Lorenzon, Jacques Besson |
| Migration-Driven Hierarchical Crystal Defect Aggregation - Symmetry and Scaling Analysis | |
| Yuri Gordienko |
| Mode Mixity and Constraint Parameters Accounting for Crack Tip Curvature | |
| Valery Shlyannikov, Svetlana Kislova |
| Modeling an Interaction between a Phase Transforming Inclusion and a Crack | |
| Alexander Freidin, Igor Korolev, Elena Vilchevskaya |
| Modeling of Brittle Fracture of Porous Materials (media) under Multi-axial Compression | |
| Robert Goldstein, Nikolai Osipenko |
| Modeling of Interface Crack Growth using Discontinuous Galerkin Method | |
| Felicia Stan |
| Modeling of S/N Curves for Flawed Materials in the VHCF Regime | |
| Andreas Leitgeb, Hans-Peter Gaenser, Wilfried Eichlseder |
| Modelling of Ductile Crack Growth in Welded Joints using Micromechanical Failure Criterion | |
| Marko Rakin, Nenad Gubeljak, Milos Dobrojevic, Bojan Medjo, Aleksandar Sedmak |
| Modelling of Fatigue in Some Steels and Non-Ferrous Alloys | |
| Donka Angelova, Rozina Yordanova |
| Models of Nanofibrous Composite Fracture Toughness | |
| Mikhail Perelmuter |
| Multiscale Damage Evolution as Structural-Scaling Transitions in Mesodefects Ensembles | |
| Oleg Naimark |
| Nanoscopic Multimode Fracture Mechanisms in Anisotropic Silicon | |
| Victor Kozhushko, Peter Hess |
| New Correlations for the Cyclic Properties of Engineering Materials | |
| Alberto Carpinteri, Marco Paggi |
| New Techniques for In-situ Observations of Crack Growth Behaviour | |
| Thomas J. Marrow |
| Nonlocal Damage Modelling Using the Element-free Galerkin Method in the Frame of Finite Strains | |
| Xiaofei Pan, Huang Yuan |
| Numerical Determination of Fatigue Crack Growth in 3D Structures Consisting of Non-homogeneous and/or Non-isotropic Materials | |
| Markus Fulland, Martin Steigemann, Hans A. Richard, Maria Specovius-Neugebauer |
| Numerical Optimization of Properties of Solidifying Ceramic Material EUCOR | |
| František Kavi?ka, Karel Stránský, Josef Št?tina, Jana Dobrovská, Bohumil Sekanina |
| Numerical Simulation of Interfacial Failure between Copper and Porous Low-k Dielectrics | |
| Shunsuke Miyagawa, Masaki Omiya |
| On a Numerical Scheme for Curved Crack Propagation Based on Configurational Forces and Maximum Dissipation | |
| Henning Schütte |
| On Constraint-modified Failure Assessment Diagrams for Solids with a Crack /Notch | |
| Yury Matvienko |
| On Localization Properties of Damage Models | |
| Milan Jirásek, Martin Horák |
| On the Development of Key Curve Methods for the Determination of Dynamic Crack Resistance Curves of Ductile Cast Iron (DCI) | |
| Wolfram Baer, Dieter Bösel, Arno Eberle, Dietmar Klingbeil |
| On the Differences Observed in the Fracture Behaviour of Centre Cracked and Centre Notched Specimens and Their Effect on Structural Integrity Assessments | |
| Sergio Cicero, Federico Gutiérrez-Solana, Anthony Horn |
| On the Fatigue Stress Range Calculations with On-line Monitoring Systems in Nuclear Power Plants | |
| Román Cicero, I?aki Gorrochategui, Sergio Cicero, José Alberto Álvarez |
| On the Micromechanisms of Fatigue Long Crack Growth under Remote Shear Loading Modes | |
| Libor Holá?, Anton Hohenwarter, Karel Sláme?ka, Reinhard Pippan, Jaroslav Pokluda |
| On the Role of Microcrack Initiation during Fatigue of a Duplex Steel in the Very-High-Cycle-Fatigue (VHCF) Regime | |
| Ulrich Krupp, Helge Knobbe, Hans-Jürgen Christ, Philipp Köster, Claus-Peter Fritzen |
| Optical Based Characterisation of an Aluminium Alloy | |
| Yee-Han Tai, Dave Asquith, Christophe Pinna, John Yates |
| Orientation Dependence of the Temperature of Brittle–Ductile Transition of Molybdenum Single Crystals | |
| Arkadiy Dobromyslov, Galina Dolgikh, Nina Taluts |
| Percolation of Intergranular Fracture Dependent on Grain Boundary Microstructures during Superplastic Deformation in Al-Li-Cu-Mg-Zr Alloy | |
| Shigeaki Kobayashi, Sadahiro Tsurekawa, Tadao Watanabe |
| Performance Comparison of Railway Wheel in Terms of Fracture Mechanics and Flat Generation | |
| Seok Jin Kwon, Dong Hyung Lee, Jung Won Seo, Won Hee You |
| Periodic Set of the Interface Cracks with Contact Zones in an Anisotropic Bimaterial | |
| Sergei Kozinov, Volodymyr Loboda |
| Plastic Limit Loads for Idealized Branch Junctions under Combined Pressure and Bending | |
| Kuk-Hee Lee, Kang-Mook Ryu, Yun-Jae Kim, Kee Bong Yoon |
| Plastic Limit Pressures of Circumferential Cracked Pipe Bends | |
| Seok-Pyo Hong, Jong-Hyun Kim, Yun-Jae Kim |
| Plasticity, a Major Agent in Triggering a Brittle Fracture Mode | |
| Yosef Katz |
| Predicting Fatigue Crack Retardation in 7150 Aluminum Alloy | |
| Marcos Pereira, Fathi Darwish, Leonardo Godefroid, Arnaldo Camar?o |
| Prediction of Crack Growth in Higher Strength Steels Subjected to Constant Amplitude Loading with Overloads | |
| Krzysztof Werner, Maciej Motloch |
| Prediction of Fatigue Life in Composite Materials using Thermoelastic Stress Analysis | |
| Janice Dulieu-Barton, Trystan Emery |
| Pre-strain History Effect on Ductile Fracture | |
| Pål Are Eikrem, Zhiliang Zhang, Erling Østby, Bård Nyhus |
| Problems of Crystallization of B2-FeAl Based Alloys | |
| Jaromír Kope?ek, Karel Jurek, Vladimír Šíma, Pavel Lej?ek |
| Progressive Crack Propagation in Bi-material Adhesive Bonding | |
| Hamed Yazdani-Nejad, Saeid Hadidi-Moud |
| Prominent Features of Deformation and Destruction of Polycrystalline Aluminium | |
| Natalya Zarikovskaya, Lev Zuev |
| Proposal of Estimation Method for Notched Specimen Fatigue Limit of Commercially Pure Titanium | |
| Takumi Fujii, Shigeru Hamada, Hiroshi Noguchi |
| Pseudo-Shell Model for Crack Analysis of Tunnel Linings | |
| Zihai Shi, Masaaki Nakano |
| Ratcheting of High Temperature Materials at Thermal Cyclic Loading | |
| Leonid Getsov, Alexandr Rybnikov, Artem Semenov |
| Redundancy of Composite Glass Beams at Extreme Conditions | |
| Christian Louter, Fred Veer |
| Relationship between J-integral and CTOD for a C(T) Specimen: a 3D FE Analysis | |
| Krishnaraja Kodancha, Shashidhar Kudari |
| Reliability Estimation for Structure under Fatigue Load Using Probability Theory and Fatigue Crack Growth Model | |
| Ouk Sub Lee, Dong Hyeok Kim, Hong Min Kim, Hye Bin Choi |
| Residual Stress and Reduction of the Stress Concentration Factor in Rivet Holes of 2024–T3 Aluminium Alloy | |
| Mohamed Elajrami, Mohamed Benguediab, Ronald Guillen |
| Residual Stress Effect on Fatigue Life of a Cold-worked Rivet Hole | |
| Mohamed Elajrami, Mohamed Benguediab, Ronald Guillen |
| Residual Stress-induced Crack-tip Constraint: A Parametric Study | |
| Xiaobo Ren, Zhiliang Zhang, Bård Nyhus |
| Response of Inherently Brittle Materials on Higher Loading Rates | |
| Zden?k Chlup, Petr Flašar, Ivo Dlouhý |
| RMS SIF Weight Functions for Surface Cracks: an Illustration of Capabilities and Limitations | |
| Amirebrahim Chahardehi, Feargal Brennan |
| Shielding Effects in Multiple Fatigue Cracks: an Experimental Simulation of Thermal Fatigue Effects, in Stainless Steel 304 | |
| Alain Koster, Mustapha Dib, Luc Rémy, Claude Amzallag |
| Short Crack Growth Behavior and Its Relation to Notch Sensitivity and VHCF | |
| Yoshiyuki Kondo, Masahiro Endo, Arthur J. McEvily |
| Silicon Nitride Materials for Hot Working of High Strength Metal Wires | |
| Robert Danzer, Markus Lengauer |
| Simulation of Crack Growth due to Hydrogen-Induced Stress-Corrosion Cracking on a High-Strength Steel FeE690T | |
| Rainer Falkenberg |
| Simulation of Failure in Porous Elastic Solids Incorporating Size Effects | |
| Uwe Mühlich, Lutz Zybell, Meinhard Kuna |
| Simulation of Fatigue Fracture Propagation in Concrete using a Lattice Model | |
| Andrea Carpinteri, Andrea Spagnoli, Li-Ping Guo, Sabrina Vantadori |
| Single Overload Effect in Short Crack | |
| Tomoe Sudo, Masanobu Kubota, Yoshiyuki Kondo |
| Size Effect on Strength and Lifetime Distributions of Quasibrittle Structures Implied by Interatomic Bond Break Activation | |
| Zdenek P. Bazant, Jia-Liang Le, Martin Z. Bazant |
| Some Critical Aspects of Fatigue Crack Propagation in Metallic Materials | |
| Jean Petit |
| Some Feature of Fretting Fatigue Strength/Life and it's Mechanical Clarifications | |
| Toshio Hattori, Minoru Yamashita, Vu Trung Kien |
| Strain Induced Martensitic Transformation in two Austenitic Stainless Steels: Macro-Micro Behaviour | |
| Stéphanie Nanga, André Pineau, Benoît Tanguy, Pierre- Olivier Santacreu |
| Strain-induced Martensite Formation and its Influence on the Damage Behaviour under Monotonic and Cyclic Loading | |
| Carsten Müller-Bollenhagen, Martina Zimmermann, Hans-Jürgen Christ |
| Strength Mis-Match Effects on Limit Loads for Surface Cracked Tensile Plates | |
| Tae-Kwang Song, Yun-Jae Kim, Jong-Sung Kim, Tae-Eun Jin |
| Strength Reduction Produced by Shallow Notches: an Asymptotic Matching Approach | |
| Pietro Cornetti, David Taylor, Alberto Carpinteri |
| Stress State and Limit Equilibrium of Thickness-Inhomogeneous Shell with a System of Arbitrary Located Surface Cracks | |
| Roman Kushnir, Myron Nykolyshyn, Taras Nykolyshyn, Mykola Rostun |
| Stronger and Weaker Singularity of an Inclined Crack Terminating at the Orthotropic Bimaterial Interface | |
| Tomáš Profant, Michal Kotoul, Old?ich Ševe?ek |
| Structural Integrity Assessment of Heat-and-Power-Engineering Pipelines with Corrosion Defects | |
| Ihor Dmytrakh, Volodymyr Panasyuk |
| Structure and Properties of Materials after Pressing by the ECAP | |
| Miroslav Gréger, Vlastimil Vodárek, Ladislav Kander |
| Study of Interface Delamination by a Newly Designed Miniature Mixed Mode Bending Setup | |
| Murthy Kolluri, M.H.L Thissen, J.P.M Hoefnagels, J.A.W.van Dommelen, M.G.D Geers |
| Study on Establishing Creep Testing Method using Miniature Specimen of Lead Free Solders | |
| Akira Ueno, Naohiro Takami, Reiji Sato |
| Study on Low Cycle Fatigue Crack Growth Property Based on Stress Triaxiality Factor | |
| Takehisa Yamada, Youichi Yamashita |
| Sufficient Criterion of Quasi-brittle Fracture for Complicated Stress State | |
| Vladimir Kornev, Vladimir Kurguzov |
| Surface Damage Evolution Of Graded Materials | |
| Michael Besel, Angelika Brueckner-Foit, Alexander Gruening, Jens Mannel |
| Temperature Dependence of Beremin-Model Parameters for RPV Steel | |
| Gyöngyvér B. Lenkey, Róbert Beleznai |
| Tensile and Fatigue Behavior of Poly-p-Phenylene Benzobisoxazole (PBO) Fibers | |
| Noriyo Horikawa, Yukihiro Nomura, Tooru Kitagawa, Yoshio Haruyama, Akiyoshi Sakaida, Takashi Imamichi |
| The Behavior of Statically-Indeterminate Structural Members and Frames with Cracks Present | |
| Paul C. Paris, Thierry Palin-Luc |
| The Damage Mechanics of Creep Thickness Effects of the Single Crystal Superalloys | |
| Alexander Staroselsky, Brice Cassenti |
| The Decrease of Tensile Strength for the Notched Specimens in the Hydrogen Gas | |
| Hisatake Itoga, Yuichi Suzuki, Hiroshi Noguchi |
| The Effect of Electromagnetic (i.e. Induction) Stirring of the Melt of Concast Billets on the Reduction of their Surface Defects | |
| Karel Stránský, František Kavi?ka, Josef Št?tina, Bohumil Sekanina, Lubomír Stránský |
| The Equivalent Stress on the Critical Plane Determined by the Maximum Covariance of Normal and Shear Stresses | |
| Karolina Walat, Tadeusz ?agoda |
| The Evaluation of the Service Life of Thermal Cut Components | |
| Niko Jezernik, Sre?ko Glodež, Janez Kramberger |
| The Finite Element Model to Simulate Dynamic Fracture of Initially Intact Media, Dynamic Crack Initiation, Propagation and Arrest | |
| Vladimir Bratov, Yuri Petrov, Alexander Utkin |
| The Influence of Bi-material Interface on Crack Propagation Paths | |
| Liviu Marsavina, Tomasz Sadowski |
| The Influence of Twinning in B19' Martensitic Structure of NiTi Alloy on Mechanical Properties from First Principles | |
| Petr Šesták, Miroslav ?erný, Jaroslav Pokluda |
| The Influence of Vertex Singularities on Fatigue Crack Shape | |
| Pavel Huta?, Luboš Náhlík, Zden?k Knésl, Stanislav Seitl |
| The Regularities of the Acoustic Emission at High-temperature Deformation and Fracture | |
| Mikhail Starostenkov, Vladimir Plotnikov, Sergey Makarov |
| The Role of Process Models, Flow Charts and Material Databases on the Structural Integrity of Transporting Steel Pipeline Systems | |
| János Lukács, Gyula Nagy, Imre Török |
| The Small Punch Test as a Tool for Basic Structural Integrity Assessments | |
| Roberto Lacalle, Javier García, José Alberto Álvarez, Federico Gutiérrez-Solana |
| The Specific of the Creep Process in Hydrogen of the Degraded in Service 2.25Cr-Mo Steel | |
| Andzej Zagórski, Oleksandra Student, Leontiy Babiy, Hryhoriy Nykyforchyn, Krzysztof Jan Kurzyd?owski |
| The Use of the Master Curve in Structural Integrity Assessment | |
| Kim Wallin |
| Theoretical and Experimental Study of Nonequilibrium Structural-Scaling Transitions in Metals | |
| Vladimir Oborin, Yuriy Bayandin, Sergey Permyakov, Vladimir Leontiev, Oleg Naimark |
| Thermal Fracture of a FGM/Homogeneous Bimaterial with Defects | |
| Vera Petrova, Siegfried Schmauder |
| Thermo-mechanical Fatigue Crack Propagation Experiments in IN718 | |
| Lars Jacobsson, Christer Persson, Solveig Melin |
| Threshold of Shear-mode Fatigue Crack Growth in Bearing Steel | |
| Hisao Matsunaga, Satoshi Muramoto, Masahiro Endo |
| Transition of Acceleration Behavior and Life Time Prediction of Mg-Al Solution Hardened Alloys at around 0.6Tm | |
| Hiroyuki Sato, Takaya Miyano |
| T-stress Determination using TSA and DIC | |
| Mohammad Zanganeh, Rachel Tomlinson, John Yates |
| Two Methods for Determination of Fatigue Crack Propagation Limit Curves and their Applicability for High Strength Steels | |
| János Lukács |
| Universality of Fluctuation Statistics under Plastic Deformation of Metals | |
| Ivan Panteleev, Oleg Naimark, Catherine Froustey |
| Weak Fiber\matrix Interface Degradation and the Crack Tip Energy Dissipation. | |
| Kirill Khvostunkov, Aleksey Shpenev |
| Wear Corrosion Characteristics of Various Biomedical Materials in Quasi-Human Body Environment | |
| Yuji Kimura |
| Yield Load Solutions of Heterogeneous Welded Joints | |
| Drazan Kozak, Nenad Gubeljak, Pejo Konjatic, Josip Sertic |