General Papers
| On the Use of the Modified Wöhler Curve Method to perform the Fatigue Assessment of Welded Joints subjected to Constant and Variable Amplitude Multiaxial Fatigue Loading | |
| Susmel Luca |
| Evaluation of Multiaxial Low Cycle Fatigue Life under Nonproportional Loading | |
| Takamoto ITOH, Masao SAKANE |
| Effect of combined static loadings on torsional fatigue of carbon steel specimens with circumferential notches | |
| Daichi Yamashita, Isao Ohkawa |
| High Cycle Fatigue Strength of Severely Notched Cast Iron Specimens under Tension and Torsion Loading Conditions | |
| Filippo Berto, Paolo Lazzarin, Roberto Tovo |
| On the shrink-fit induced multiaxial stress state in adjacent notched shaft geometries | |
| E. Leidich, S. Hofmann, B. Broužek |
| Micromechanical investigation of the influence of defects on the high cycle fatigue strength | |
| R. Guerchais, F. Morel, C. Robert, N. Saintier |
| A New Multi-Axial Creep-Damage Model and Its Application in Creep Crack Growth Predictions | |
| Jian-Feng Wen, Shan-Tung Tu |
| Multiaxial ratcheting-fatigue behaviors of Sn-3Ag-0.5Cu solder | |
| Ting LIANG, Yongfeng LIANG, Gang CHEN, Xu CHEN |
| Fatigue damage in cast aluminium alloy under multiaxial loading conditions | |
| I. Koutiri, D. Bellett, F. Morel, L. Augustins |
| A Cyclic Plasticity Model for Multiaxial Behavior of Magnesium | |
| M. Noban, H. Jahed |
| Mechanosorptive behaviour of wood: a pseudo-elastic formulation | |
| O. Saifouni, R. Moutou Pitti, J. F. Destrebecq |
| Relaxation of Welding Residual Stresses in Tubular Joints under Multiaxial Loading | |
| Majid Farajian, Thomas Nitschke-Pagel, Mirko Boin, Robert C. Wimpory |
| Experimental investigations on the fatigue strength of welded joints on full-scale crane runway girders | |
| Philipp Rettenmeier, Mathias Euler, Eberhard Roos, Ulrike Kuhlmann |
| A Rapid Estimation Method of the Fatigue Cyclic Behavior in a Confined Plasticity zone : application to a double-notched specimen | |
| S. Plessis, C. Doudard, D. Thevenet, S. Calloch, M. Cazuguel |
| Comparative study between butt and overlap welded of dissimilar steels (Structural - Stainless) under monotonic and cycled load | |
| José A. Sira, Alberto Velásquez del Rosario, Andrés L. García Fuentes |
| Influence of static loadings on load- and deformation- controlled torsional fatigue in steels | |
| Koichiro Tomita, Isao Ohkawa |
| A multiaxial model for fatigue life estimation based on a combined deviatoric strain amplitude | |
| E. N. Mamiya, F. C. Castro, L. Malcher, J. A. Araújo |
| Incremental approach for the fatigue design under complex loading of metallic materials | |
| D. Halm, Y. Nadot, Q. H. Vu |
| A New Formulation of the C-S Multiaxial Fatigue Criterion in the Frequency Domain | |
| Andrea Carpinteri, Cristian Bagni, Andrea Spagnoli, Sabrina Vantadori |
| Effects of Biaxial Mean Stress on Critical Plane Orientations under Biaxial Fatigue Loading Conditions | |
| Baimao LEI, Van-Xuan TRAN, Saïd TAHERI, Li WAN, Yu ZHOU |
| Fatigue Life, Fractographic and Thermographic Analysis of Steel X2CrNiMo17-12-2 for Proportional and Non-Proportional Loads | |
| D. Skibicki, J. Sempruch, A. Lipski, Ł. Pejkowski |
| Modification of Zenner and Liu Criterion Due to Non-Proportionality of Fatigue Load by Means of MCE Approach | |
| D. Skibicki, Ł. Pejkowski |
| Application of Stress-Based Multiaxial Fatigue Criteria for Proportional and Non-proportional Variable Amplitude Loadings for Laserbeam-Welded Thin Aluminium Joints | |
| A. Bolchoun, J. Wiebesiek, H. Kaufmann, C. M. Sonsino |
| Out of phase multiaxial fatigue strength of cast iron | |
| M.E. Cristea, S. Foletti, C. Cagdas |
| On the Fatigue Crack Growth Analysis of Spliced Plates under Sequential Tensile and Shear Loads | |
| Xiaobo Yu |
| Non-Proportional Behaviour of a Nickel-Based Superalloy & Characterisation of the Additional Hardening Response by a Modified Cyclic Hardening Curve | |
| Matthew R. Bees, Stephen J. Pattison, Neil Fox, Mark T. Whittaker |
| Analysis of the mesoscopic high cycle multiaxial fatigue strength of fcc metals with crystal plasticity and generalized extreme values probability | |
| Anis HOR, Nicolas SAINTIER, Camille ROBERT, Thierry PALIN-LUC, Franck MOREL |
| Estimation of the fatigue life of the alloy steel 35NCD16 under random loading | |
| M. Kurek, T. Łagoda, F. Morel |
| Multiaxial Fatigue Behaviour (HCF and LCF) of AZ31 Magnesium Alloy | |
| V. Anes, L. Reis, B. Li Li, M. Freitas |
| The critical aspect of cycle´s definition in multiaxial fatigue conditions | |
| V. Anes, L. Reis, B. Li, M. Freitas |
| Low cycle fatigue of an austenitic TRIP steel under various biaxial-planar stress states | |
| S. Ackermann, D. Kulawinski, S. Henkel, H. Biermann |
| LCF behavior and microstructure of alpha-brass CuZn30 under uniaxial, planar-biaxial and tension-torsion loading conditions | |
| S. Henkel, A. Weidner, H. Biermann, H.-J. Kühn, B. Rehmer, N. Sonntag |
| Estimation of Fatigue Crack Orientation using Critical Plane Parameters: An Experimental Investigation | |
| J. Albinmousa, H. Jahed, S. Lambert |
| High cycle multiaxial fatigue strength of cast iron: experimental investigation under uniaxial and biaxial loading | |
| R. Tovo, P. Lazzarin, F. Berto, M. Cova |
| Deviatoric Formulation of the SWT Parameter | |
| D. Kujawski |
| Very-High-Cycle-Fatigue Regime of In-service Titanium Blades Subjected to Multiaxial Loading During Aircraft Accessory Power Plant Operations | |
| A. A. Shanyavskiy, A. D. Nikitin, G. G. Belousov |
| A fatigue equivalence method applied to railway wheels submitted to in-service multi-input loads | |
| C. Roux, X. Lorang, B. Delattre, H.M. Maitournam, M.L. Nguyen-Tajan |
| Localization rules for the extension of a HCF two-scale damage model to a Lemaitre LCF damage model | |
| P. Gaborit, R. Desmorat, A. du Tertre, A. Pyre |
| Multi-axial High-cycle Fatigue Failure Behavior of 2A12-T4 Aluminum Alloy under Torsion Loading | |
| Shi Xinhong, Zhang Jianyu, Xiao Qingshan, Fei Binjun |
| Comparison of Frequency-Domain Methods for a Vibration-Fatigue-Life Estimation | |
| J. Slavic, M. Mrsnik, M. Boltezar |
| A Stress-based Method to Predict Multiaxial Fatigue Limits | |
| Go MATSUBARA, Kenji NISHIO |
| Calibrated Modeling and Simulation of Cyclic Thermal Stress Induced Fatigue in AISI 316L Stainless Steel | |
| G. Facheris, K. G. F. Janssens |
| Creep Damage Assessment Considering Stress Multiaxiality for Notched Specimens of a CrMoV Steel | |
| Nobuhiro ISOBE, Kenji YASHIRODAI, Ken’ichi MURATA |
| Thermomechanical Creep Fatigue Life Time Comparison in Three Heat-Resistant Steels | |
| P. Wang, L. Cui, A. Scholz, S. Linn, M. Oechsner |
| Low Cycle Fatigue of Mod.9Cr-1Mo Steel under Multiaxial Loading at High Temperature | |
| Dan Jin, Wei Wang, Masao Sakane |
| Investigation of the high temperature fatigue behavior of the nickel-base superalloy Waspaloy™ under biaxial-planar loading | |
| D. Kulawinski, S. Henkel, H. Biermann, D. Holländer, M. Thiele, U. Gampe |
| Combined Experimental and Theoretical Analysis of the Mixed Mode Bending Test | |
| N. Ben Salem, J. Jumel, M.K. Budzik, M.E.R. Shanahan |
| Thermal measurements used to characterize the fatigue properties of elastomeric materials at micro scales | |
| I. Masquelier, Y. Marco, V. Le Saux, C. Doudard, S. Calloch, P. Charrier |
| Multiaxial Fatigue Behaviour of 1050 H14 Aluminium Alloy by a Biaxial Cruciform Specimen Testing Method | |
| R.A. Cláudio, M. Freitas, L. Reis, B. Li, I. Guelho |
| Optimization of Cruciform Specimen for Low Capacity Biaxial Testing Machine | |
| I. Guelho, L. Reis, M. Freitas, B. Li, J. F. A. Madeira, R. A. Cláudio |
| Electric Current Density and Temperature Field around Corner Crack at a Hole under Joule Heating | |
| Thomas Jin-Chee LIU |
| Load path effect in mixed mode I+II+III fatigue crack growth | |
| Fremy Flavien, Sylvie Pommier, Erwan Galenne, Stephan Courtin |
| Fatigue Crack Propagation in Short-Fiber Reinforced Plastics | |
| Keisuke TANAKA, Takuya KITANO, Noboru EGAMI |
| A Critical Plane Theory For Multiaxial Fatigue of Elastomers | |
| E. Verron, A. Andriyana, M. Aït-Bachir |
| A novel approach to predict the growth rate of short cracks under multiaxial loadings | |
| F. Brugier, S. Pommier, R. de Moura Pinho, C. Mary, D. Soria |
| Crystallinity and multiaxiality around a crack tip in natural rubber investigated by synchrotron wide-angle x-ray diffraction during fatigue tests | |
| P. Rublon, B. Huneau, E. Verron |
| Mode I Fatigue Crack Growth with Occasional Mode II Loading in 7075 Aluminum Alloy | |
| H. Matsunaga, M. Makizaki, D.F. Socie, K. Yanase, M. Endo |
| Effects of Small Defects and Cracks in Multiaxial Fatigue | |
| K. Yanase, M. Endo |
| A Macro- and Micro-Approach to the Anisotropic Fatigue Performance of Progressively Drawn Pearlitic Steel | |
| J. Toribio, J. C. Matos, B. González |
| Benchmark Problems in Multiaxial Fatigue | |
| D.F. Socie, S.D. Downing, S. Utagawa |
| Crack growth rate under variable T-stress V.N. | |
| V.N. Shlyannikov, A.P. Zakharov |
| Fatigue Crack Growth Behavior of Aluminum 7075-T6 Tubes with a Transverse Hole under Axial and Torsion Loadings | |
| T. Zarrin-Ghalami, A. Fatemi, D. F. Socie |
| Contact Fatigue Crack Initiation Prediction of Spur Gears Based on Finite Element Dynamics Analysis | |
| W. J. Qin, C. Y. Guan |
| Theoretical and Experimental approach to Rolling Contact Fatigue in high-speed railways | |
| J. Kuszczak, L. Reis, B. Li, M. Freitas |
| Application of the Cracking Energy Density (CED) multiaxial fatigue criteria for fretting fatigue life prediction: case of mono-contact steel/Al | |
| A. Belloula, A. Amrouche, M. Nait-Abdelaziz, N. Benseddiq |
| X-FEM 2D crack propagation under rolling contact fatigue taking into account realistic residual stresses | |
| Benoit Trollé, Marie-Christine Baietto, Anthony Gravouil |
| Fatigue design methodology for automotive welded structures under complex loading | |
| F. DAL CERO COELHO, Q. H. VU, D. HALM |
| Combined Torsion and Bending Moments at Collapse for Pipes with Circumferentially Through-Wall Crack | |
| Kunio Hasegawa, Yinsheng Li, Kazuya Osakabe |
| Effect of Wall Thinning Shape on Combined Torsion and Bending Moments at Plastic Collapse for Pipes | |
| Yinsheng Li, Kunio Hasegawa |
| Role of Bond on Crack Width in Reinforced Concrete Members in Tension | |
| P. Bernardi, R. Cerioni, D. Ferretti, E. Michelini |
| Fatigue Performance and Microstructure of Pt-20Ir Wire and Its Coil For Medical Device Application | |
| Bernard Li, Haitao Zhang, Kailynn Cho |
| Experimental and Numerical Study of the Fatigue of GFRP Composites under Complex Loadings | |
| H. Sawadogo, S. Panier, S. Hariri |
| Fatigue in Dental Implants | |
| J. M. Ayllón, C. Navarro, J. Vázquez, J. Domínguez |
| Heat build-up measurements on SFRP: fast determination of fatigue properties and validation of a fatigue criterion on automotive parts | |
| Y. Marco, L. Jégou, V. Le Saux |
| Shape memory alloys fatigue and self-heating of NiTi | |
| V. Legrand, S. Arbab Chirani, S. Calloch |
| MULTIAXIAL FATIGUE DESIGN OF CAST PARTS : DEFECT STRESS GRADIENT (DSG) APPROACH | |
| Y Nadot, P Mu, C Nadot-Martin |
| Lifetime of semi-ductile materials on the critical plane | |
| K. Walat, T. Łagoda |
| Multiaxial Fatigue Behaviour of Selected Aluminium Alloys under Bending with Torsion Loading Condition | |
| Adam NIESŁONY, Tadeusz ŁAGODA, Karolina WALAT, Marta KUREK |
| Residual Fatigue Life Estimation under Mixed Mode Loading | |
| Slobodanka Boljanović, Stevan Maksimović |
| Locally Multiaxial Fracture Behaviour of High-Strength Cold-Drawn Prestressing Steel Wires | |
| J. Toribio, B. González, J. C. Matos |
| Multiaxial Life Estimations Based on Tensile Properties | |
| N. Shamsaei, S. A. McKelvey |