General Papers
| Fracture mechanics in retrospect in contrast to multiscaling in prospect | |
| G. C. Sih |
| Fracture mechanics in retrospect in contrast to multiscaling in prospect | |
| E. E. Gdoutos |
Session I
| A short crack model for fatigue limit of press-fittings in railway axles | |
| S. Beretta, A. Cerrini, V. Faustin |
| A weakest – link analysis for fatigue strength of Components containing defects | |
| S. Beretta, G. Chai, E. Soffiati |
| Local compliance experiments and crack closure models | |
| M. Carboni |
| Application of new methods to evaluate crack closure in the near-threshold fatigue crack growth regime | |
| David Fersini, Alessandro Pirondi |
Session II
| Thermo-mechanical analysis of elastic cracks In heterogeneous materials by FEM and VCFEM | |
| L. Bruno, F. M. Furgiuele, C. Maletta |
| Microstructural investigation and thermal shock behaviour of mullite-cordierite refractory materials | |
| C. Leonelli, P. Veronesi, D. N. Boccaccini, M. Romagnoli, I. Dlouhy, A. R. Beccaccini |
| High reliability ceramic laminates by design | |
| Vincenzo M. Sglavo, Massimo Bertoldi |
| Reliability assessment of a SiC based component for high temperature application | |
| E. Trentini, A. Finelli, M. Labanti, S. Sangiorgi |
Session III
| Time-scale effects on acoustic emission due to elastic waves propagation in monitored cracking structures | |
| Alberto Carpinteri, G. Lacidogna, N. Pugno |
| Hysteretic flexural behaviour of a reinforced concrete beam with a T cross-section | |
| Andrea Carpinteri, A. Spagnoli, S. Vantatori |
| Nanoscale strain localization: the instability of strainions | |
| B. Chiaia, G. Ferro |
| Structural monitoring and life-time assessment of medieval towers | |
| Alberto Carpinteri, G. Lacidogna |
| Size effect in grained materials: extreme value theory approach | |
| Alberto Carpinteri, P. Cornetti, S. Puzzi |
| Theoretical and numerical investigation on internal instability phenomena in composite materials | |
| Alberto Carpinteri, M. Paggi, G. Zavarise |
Session IV
| Numerical approach and experimental validation of composite soundproofing panels for aeronautical applications | |
| G. Leofanti, M. Marchetti, G. C. Pulvirenti, D. Vocca, F. Turris |
| Surveillance system airborne composite radome design | |
| G. Pulvirenti, P. D. Tromboni, M. Marchetti, A. Delogu, A. Maccapani, R. Aricò |
| Multiple delamination of laminated structures | |
| R. Massabò, M. G. Andrews, B. N. Cox |
| Strain rate dependence of the anisotropic fracture Toughness of rubber modified polypropylene films | |
| S. Pandini, A. Pegoretti |
| Mixed-mode crack growth in toughened PMMA | |
| L. Andena, A. Corigliano, R. Frassine, S. Mariani |
| Applicability of the load separation criterion and the normalization method to high-rate testing of ductile polymers | |
| F. Baldi, T. Riccò |
Session V
| A nonlinear FE method for the prediction of slabs on grade behaviour | |
| B. Belletti, P. Bernardi, A. Meda |
| Quantized fracture mechanics and related applications for predicting the strength of defective nanotubes | |
| N. Pugno, R. Ruoff |
| Comparative theoretical-experimental evaluation of conrod little-eye stress analysis | |
| M. T. Cascella, N. Rossi, S. Cassani, A. Costa |
| A modified relaxation-model for the prediction of residual stresses in two-dimensional rolling/sliding contact | |
| S. Foletti, H. J. Desimone |
| The Nondimensional Plasticity Rotational Parameter used in DWT Tests: Evaluation by means of Finite Element | |
| A. Fonzo, P. Salvini, M. Di Biagio |
Session VI
| Cracking mechanisms in a Hot-dip zinc coated steel | |
| V. Di Cocco, Francesco Iacoviello, S. Natali |
| Ferritic and austenitic sintered stainless steels Fatigue crack propagation resistance: hydrogen embrittlement influence | |
| Francesco Iacoviello, Vittorio Di Cocco |
| Fracture toughness KIvM measurement of non-brittle metallic materials by “Chevron Notched” specimens | |
| V. Dal Re, A. Zucchelli |
| Fatigue crack growth behavior of nitrided and shot peened specimens | |
| M. Guagliano, L. Vegani |
| Fracture toughness of plastic-mold steels:dependence upon heat treatment and microstructure | |
| D. Firrao, P. Matteis, M. Vassallo |
| Study of Advanced Composite Structures for High Temperature Applications | |
| M. Marchetti, G. Cavallo, L. Amantini, S. Corradi, M. Bellachioma |
Session VII
| Scale-independent constitutive law for concrete in compression | |
| Alberto Carpinteri, G. Ferro, G. Ventura |
| Influence of the intermediate material on the singular stress field in tri-material junctions | |
| Alberto Carpinteri, M. Paggi |
| Fracture response of cracked orthotropic plates | |
| C. Carloni, L. Nobile |
| Effect of interaction between collinear cracks on the strength distribution of brittle materials | |
| M. Ciavarella, L. Afferrante, E. Valenza |
Session VIII
| Stress intensity factors for a subsurface crack in a two dimensional half-space | |
| M. Beghini, L. Bertini, V. Fontanari |
| An implicit gradient stress failure condition | |
| R. Tovo, P. Livieri, E. Benvenuti |
| Analytical evaluation of J-integral for an elliptical notch | |
| P. Livieri, P. Livieri |
| Preliminary investigation by synchrotron radiation of small cracks and defects in AA FSW samples | |
| F. Cosmi, L. Rigon, L. Mancini, R. Tovo, M. Volpone |
| FRP – Concrete delamination results adopting different experimental pure shear setups | |
| C. Mazzotti, M. Savoia, B. Ferracuti |