Issue 37

V. Anes et alii, Frattura ed Integrità Strutturale, 37 (2016) 124-130; DOI: 10.3221/IGF-ESIS.37.17 130 A CKNOWLEDGEMENTS his work was supported by FCT, through IDMEC, under LAETA project UID/EMS/50022/2013. R EFERENCES [1] Anes, V., Reis, L., de Freitas, M., A new criterion for evaluating multiaxial fatigue damage under multiaxial random loading conditions, Advanced Materials Research, 181 (2014) 1360–1365. doi:10.4028/ www.scientific.net/AMR.891- 892.1360. [2] Wang, Y., Susmel, L., The Modified Manson–Coffin Curve Method to estimate fatigue lifetime under complex constant and variable amplitude multiaxial fatigue loading, International Journal of Fatigue, 83 (2016) 135–49. doi:10.1016/j.ijfatigue.2015.10.005. [3] Chaves, V., Navarro, A., Madrigal, C., Stage I crack directions under in-phase axial–torsion fatigue loading for AISI 304L stainless steel, International Journal of Fatigue, 80 (2015) 10–21. doi:10.1016/j.ijfatigue.2015.05.004. [4] Chaves, V., Madrigal, C., Navarro, A., Biaxial fatigue tests and crack paths for AISI 304L stainless steel, Frattura ed Integritá Strutturale, 30 (2014) 273. doi: 10.3221/IGF-ESIS.30.34. [5] Carpinteri, A., Ronchei, C., Spagnoli, A., Vantadori, S., Lifetime estimation in the low/medium-cycle regime using the Carpinteri–Spagnoli multiaxial fatigue criterion, Theoretical and Applied Fracture Mechanics, 73 (2014) 120–127. doi:10.1016/j.tafmec.2014.06.002. [6] Carpinteri, A., Ronchei, C., Scorza, D., Vantadori, S., Critical Plane Orientation Influence on Multiaxial High-Cycle Fatigue Assessment, Physical Mesomechanics. 18 (2015) 348–54. doi:10.1134/S1029959915040074. [7] Campagnolo, A., Berto, F., Marangon, C., Cyclic plasticity in three-dimensional notched components under in-phase multiaxial loading at R=- 1, Theoretical and Applied Fracture Mechanics, 81 (2016) 76–88. doi:10.1016/j.tafmec.2015.10.004. [8] Anes, V., Reis, L., Li, B., Fonte, M., De Freitas, M., New approach for analysis of complex multiaxial loading paths, International Journal of Fatigue, 62 (2014) 21–33. doi:10.1016/j.ijfatigue.2013.05.004. [9] Anes, V., Reis, L., Li, B., Freitas, M., Sonsino, C.M., Minimum Circumscribed Ellipse (MCE) and Stress Scale Factor (SSF) criteria for multiaxial fatigue life assessment, Theoretical and Applied Fracture Mechanics, 73 (2014) 109–19. doi:10.1016/j.tafmec.2014.08.008. [10] Anes, V., Reis, L., Li, B., de Freitas, M., New cycle counting method for multiaxial fatigue, International Journal of Fatigue, 67 (2014) 78–94. doi:10.1016/j.ijfatigue.2014.02.010. [11] Shamsaei, N., (2010). PhD Thesis, Univ. of Illinois at Urbana-Champaign, USA. [12] Shamsaei, N., Fatemi, A., Socie, D.F., Multiaxial fatigue evaluation using discriminating strain paths, International Journal of Fatigue, 33 (2011) 597–609. doi:10.1016/j.ijfatigue.2010.11.002. T