Issue34

D. Scorza et alii, Frattura ed Integrità Strutturale, 34 (2015) 70-73; DOI: 10.3221/IGF-ESIS.34.06 72 1E-005 2E-005 3E-005 4E-005 Initial Compliance, C i [mm/N] 0 200 400 600 800 Peak Load, P max [N] 567.77 N 310.63 N As-received (a) A-type B-type 1E-005 4E-005 7E-005 Initial Compliance, C i [mm/N] 323.25 N 303.35 N Ther. treatment (b) A-type B-type Figure 3 : Peak load against initial compliance for: (a) the as-received and (b) the thermal pre-treated specimens. 0 10 20 30 40 Relative Crack Length Increment, % 0.0 0.5 1.0 1.5 2.0 Critical SIF, K S IC [MPam 1/2 ] 1.45MPam 1/2 0.99MPam 1/2 As-received (a) 0 15 30 45 60 Relative Crack Length Increment, % 1.22MPam 1/2 0.85MPam 1/2 Ther. treatment (b) Figure 4 : Critical SIF against relative crack length increment for: (a) the as-received and (b) the thermal pre-treated specimens. The different mechanical behaviour of the two specimen types can also be observed in terms of critical Stress Intensity Factor (SIF) values. For the as-received specimens, Fig. 4a shows that: (i) In the case of B-type, the critical SIF, S Ic K , reaches higher values with a small scatter of data. The critical SIF mean value is equal to 1.454 MPa m , and its variation is about 7.02%; (ii) In the case of A-type, the critical SIF, S Ic K , reaches values significantly smaller than the previous ones, and the scatter of data is greater. The critical SIF mean value is equal to 0.990 MPa m , and its variation is about 22.27%. The reduction of the critical SIF with respect to the first specimen type is about 32%. In Fig. 4b, analogous results are plotted for thermally pre-treated specimens, and we can observe that: (i) For B-type, the critical SIF, S Ic K , reaches again higher values, but with a larger variation of the corresponding relative crack extension. The critical SIF mean value is equal to 1.223 MPa m , and its variation is about 2.58%; (ii) For A-type, the critical SIF, S Ic K , reaches values significantly smaller than the previous ones. The critical SIF mean value is equal to 0.848 MPa m , and its variation is about 21.52%. The reduction of the critical SIF with respect to the first specimen type is about 38.8%. (a) (a) (b) (b)