Cover

1 
TOC

3 
Z. Marciniak, D. Rozumek  Models of initiation fatigue crack paths proposed by Macha

13 
F. Berto  Local approaches for the fracture assessment of notched components: the research work developed by Professor Paolo Lazzarin

23 
N. R. Gates, A. Fatemi  Crack paths in smooth and precracked specimens subjected to multiaxial cyclic stressing

39 
Y. Sumi  Fracture morphology and its evolution. A review on crack path stability and brittle fracture along buttweld

54 
R. Brighenti, A. Carpinteri, D. Scorza  Effect of fibre arrangement on the multiaxial fatigue of fibrous composites: a micromechanical computational model

71 
D. Scorza, A. Carpinteri, G. Fortese, S. Vantadori, D. Ferretti, R. Brighenti  Investigation of Mode I fracture toughness of red Verona marble after thermal treatment

81 
C. Ronchei, A. Carpinteri, G. Fortese, A. Spagnoli, S. Vantadori, M. Kurek, T. Łagoda  Life estimation by varying the critical plane orientation in the modified CarpinteriSpagnoli criterion

86 
R. Brighenti, A. Carpinteri, N. Corbari  A unified approach for static and dynamic fracture failure in solids and granular materials by a particle method

92 
I. Ivanova, J. Assih  Static and dynamic experimental study of strengthened reinforced short concrete corbel by using carbon fabrics, crack path in shear zone

102 
C. Fischer, W. Fricke  Influence of local stress concentrations on the crack propagation in complex welded components

111 
G. Meneghetti, B. Atzori, A. Campagnolo, F. Berto  A link between the peak stresses and the averaged strain energy density for cracks under mixedmode (I+II) loading

121 
L. Náhlík, K. Štegnerová, P. Hutař  Estimation of stepwise crack propagation in ceramic laminates with strong interfaces

128 
R. D. Caligiuri  Critical crack path assessments in failure investigations

137 
Y. Hos, M. Vormwaldl Measurement and simulation of crack growth rate and direction under nonproportional loadings

145 
J. Pokluda, T. Voijtek, A. Hohenwarter, R. Pippan Effects of microstructure and crystallography on crack path and intrinsic resistance to shearmode fatigue crack growth

154 
L. P. Pook  Crack paths and the linear elastic analysis of cracked bodies

162 
B. Žužek, M. Sedlaček, B. Podgornik  Effect of segregations on mechanical properties and crack propagation in spring steel

172 
F. Berto  Crack initiation at Vnotch tip subjected to inplane mixed mode loading: An application of the fictitious notch rounding concept

181 
P. Gallo, F. Berto  High temperature fatigue tests and crack growth in 40CrMoV13.9 notched components

192 
A. Campagnolo, F. Berto, L. P. Pook  Threedimensional effects on cracked discs and plates under nominal Mode III loading

202 
A. Shanyavskiy  Crack path for runout specimens in fatigue tests: is it belonging to high or veryhighcycle fatigue regime?

211 
P.O. Judt, A. Ricoeur  Crack path predictions and experiments in plane structures considering anisotropic properties and material interfaces

220 
M. Ševčík, P. Hutař, A. P. Vassilopoulos, M. Shahverdi  Analytical model of asymmetrical MixedMode Bending test of adhesively bonded GFRP joint

228 
L. E. Kosteski, F. S. Soares, I. Iturrioz  Applications of lattice method in the simulation of crack path in heterogeneous materials

238 
T.T.G. Vo, P. Martinuzzi, V.X. Tran, N. McLachlan, A. Steer  Modelling 3D crack propagation in ageing graphite bricks of Advanced Gascooled Reactor power plant

249 
Y. Nakai, D. Shiozawa, S. Kikuchi, K. Sato, T. Obama, T. Makino, Y. Neishi  In situ observation of rolling contact fatigue cracks by laminography using ultrabright synchrotron radiation

258 
Yu.G. Matvienko, M.M. Semenova  The concept of the average stress in the fracture process zone for the search of the crack path

267 
S. Kikuchi, T. Imai, H. Kubozono, Y. Nakai, A. Ueno, K. Ameyama  Evaluation of nearthreshold fatigue crack propagation in Ti6Al4V Alloy with harmonic structure created by Mechanical Milling and Spark Plasma Sintering

273 
K. Nambu, N. Egami  Influence of vacuum carburizing treatment on fatigue crack growth characteristic in DSG2

283 
B. Schramm, H.A. Richard  Crack propagation in fracture mechanical graded structures

292 
G. Lesiuk, M. Szata  Kinetics of fatigue crack growth and crack paths in the old puddled steel after 100years operating time

302 
J. Saliba, A. Loukili, J.P. Regoin, D. Grégoire, L. Verdon, G. PijaudierCabot  Experimental analysis of crack evolution in concrete by the acoustic emission technique

312 
K. Tanaka, K. Oharada, D. Yamada, K. Shimizu  Fatigue crack propagation in shortfiber reinforced plastics

321 
M. Kikuchi, Y. Wada, Y. Li  Crack growth simulation in heterogeneous material by SFEM and comparison with experiments

330 
S. Henschel, L. Krüger  Effect of inhomogeneous distribution of nonmetallic inclusions on crack path deflection in G42CrMo4 steel at different loading rate

338 
T. Makino, Y. Neishi, D. Shiozawa, S. Kikuchi, S. Okada, K. Kajiwara, Y. Nakai  Effect of defect length on rolling contact fatigue crack propagation in high strength steel

346 
P. Hess  Graphene as a model system for 2D fracture behavior of perfect and defective solids

353 
A. Tajiri, Y. Uematsu, T. Kakiuchi, Y. Suzuki  Fatigue crack paths and properties in A356T6 aluminum alloy microstructurally modified by friction stir processing under different conditions

359 
S. Takaya, Y. Uematsu, T. Kakiuchi  EBSDassisted fractographic analysis of crack paths in magnesium alloy

367 
O. Ševeček, M. Kotoul, D. Leguillon, E. Martin, R. Bermejo  Understanding the edge crack phenomenon in ceramic laminates

374 
S. Keck, M. Fulland  Investigation of crack paths in natural fibrereinforced composites

383 
E. Marcisz, D. Rozumek, Z. Marciniak  Influence of control parameters on the crack paths in the aluminum alloy 2024 under bending

391 
L. Marsavina, E. Linul, T. Voiconi, D. M. Constantinescu, D. A. Apostol  On the crack path under mixed mode loadings on PUR foams

399 
A. Satoh, M. Satoh, K. Yamada  Improvement of adhesion performance of mortarrepair interface with inducing crack path into repair

409 
F. Iacoviello, V. Di Cocco  Degenerated graphite nodules influence on fatigue crack paths in a ferritic ductile cast iron

418 
V. Di Cocco, F. Iacoviello, S. Natali, A. Brotzu  Fatigue crack micromechanisms in a CuZnAl shape memory alloy with pseudoelastic behavio

427 
V. Oborin, M. Bannikov, O. Naimark, M. Sokovikov, D. Bilalov  Multiscale study of fracture in aluminummagnesium alloy under fatigue and dynamic loading

434 
M. Goto, K. Morita, J. Kitamura, T. Yamamoto, M. Baba, S.z. Han, S. Kim  Growth behavior of fatigue cracks in ultrafine grained Cu smooth specimens with a small hole

439 
A. Riemer, H. A. Richard, J.P. Brüggemann, J.N. Wesendahl  Fatigue crack growth in additive manufactured products

449 
F. Curà, A. Mura, C. Rosso  Effect of centrifugal load on crack path in thinrimmed and webbed gears

459 
J. Bär, A. Vshivkov, O. Plekhov  Combined lockin thermography and heat flow measurements for analysing heat dissipation during fatigue crack propagation

468 
S. Henkel, E. Liebelt, H. Biermann, S. Ackermann, L. Zybell  Crack growth behavior of aluminum alloy 6061 T651 under uniaxial and biaxial planar testing condition

478 
K.L. Yuan, Y.Sumi  Modelling of ultrasonic impact treatment (UIT) of welded joints and its effect on fatigue strength

488 
T. Itoh, M. Sakane, T. Morishita, H.Nakamura, M. Takanashi  Crack mode and life of Ti6Al4V under multiaxial low cycle fatigue

499 
G. M. Domínguez Almaraz, E. Correa Gómez, J.C. Verduzco Juárez, J.L. Avila Ambriz  Crack initiation and propagation on the polymeric material ABS (Acrylonitrile Butadiene Styrene), under ultrasonic fatigue testing

510 
K. Nowak  Paths of interactive cracks in creep conditions

519 
R. Citarella, V. Giannella, M. Lepore  DBEM crack propagation for nonlinear fracture problems

526 
S. Ahmad, J. M. Tulliani, G. A. Ferro, R. A. Khushnood, L. Restuccia, P. Jagdale  Crack path and fracture surface modifications in cement composites

536 
R. A. Khushnood, S, Ahmad, G, A, Ferro, L, Restuccia, J. M. Tulliani, P. Jagdale  Modified fracture properties of cement composites with nano/micro carbonized bagasse fibers

546 
Q. Like, D. Jun, Y. Liqun Mesomechanics simulation analysis of microwaveassisted mineral liberation

555 
R. Citarella, M. Perrella  Robust design of a polygonal shafthub coupling

566 
J. He, P. Zhang, Q. Yin, K., H. Liu  Study of drilling muds on the antierosion property of a fluidic amplifier in directional drilling

576 
X. Zhengbing, Z. Kefeng, D. Yanfeng, G. Fuwen  A comparative study on dynamic mechanical performance of concrete and rock

586 
S. Ackermann, T. Lippmann, D. Kulawinski, S. Henkel, H. Biermann  Biaxial fatigue behavior of a powder metallurgical TRIP steel

592 
Z. Jijun, M. Xiangqing Defect detection of wire rope for oil well based on adaptive angle

602 
Y. Li, K. Zhang, B. Liu, Z. Pan  On the decay of strength in Guilin red clay with cracks

611 
C. Baron Saiz, T. Ingrassia, V. Nigrelli, V. Ricotta  Thermal stress analysis of different full and ventilated disc brakes

620 
M. Scafidi, D. Cerniglia, T. Ingrassia  2D size, position and shape definition of defects by Bscan image analysis

634 