Issue 30

F. Burgio et alii, Frattura ed Integrità Strutturale, 30 (2014) 68-74; DOI: 10.3221/IGF-ESIS.30.10 74 [5] Naslain R., Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview, Composites Science and Technology, 64 (2004) 155-170. [6] Reznik, B., Huttinger, K.J., On the terminology for pyrolytic carbon, Carbon, 40 (2002) 617 –636. [7] Bortchagovsky, E.G., Reznik, B., Gerthsen, D., Pfrang, A., Schimmel, Th., Optical properties of pyrolytic carbon deposits deduced from measurements of the extinction angle by polarized light microscopy, Carbon, 41 (2003) 2427 – 2451. [8] Bourrat, X., Langlais, F., Chollon, G., Vignoles, G., Low Temperature Pyrocarbons: A Review, J. Braz. Chem. Soc., 17, (2006) 1090-1095. [9] Oberlin, A., Review Pyrocarbons, Carbon, 40 (2002) 7–24. [10] Burgio, F., Pilloni, L., Labanti, M., Scafè, M., Brentari, A., Falconieri, M., Sangiorgi, S., Validation of Py-C chemical vapour deposition and infiltration process codes, In: Proceeding of 15th European Conference on Composite Materials and Oral Presentation, Venice, Italy (2012). [11] Bourrat, X., Trouvat, B., Limousin, G., Vignoles, G., Pyrocarbon anisotropy as measured by electron diffraction and polarized light, J. Mater. Res., 15 (2000). [12] Vallerot, J.M., Bourrat, X., Pyrocarbon optical properties in reflected light, Carbon, 44 (2006) 1565–1571. [13] Dupel, P., Bourbat, X., Pailler, R., Structure of pyrocarbon infiltrated by pulse-CVI, Carbon, 33 (1995) 1193-1204. [14] Morgan, P., Carbon fibers and their composites, Taylor & Francis Group, (2005). [15] Vallerot, J.M., Bourrat, X., Mouchon, A., Chollon, G., Quantitative structural and textural assessment of laminar pyrocarbons through Raman spectroscopy, electron diffraction and few other techniques, Carbon 44 (2006) 1833– 1844. [16] Bourrat, X., Structure of pyrocarbons, in Delhaès P. (Eds.), Fibers and composites, Taylor & Francis, 8 (2003). [17] Zhang, D., Li, K., Li, H., Guo L., Lu, J., The influence of deposition temperature on the microstructure of isotropic pyrocarbon obtained by hot-wall chemical vapor deposition, J Mater Sci, 46 (2011) 3632–3638. [18] Bourrat, X., Pyrocarbon performances and characterization, In: Proceed. Carbon’09, World Conf on Carbon, Biarritz (2009) T11-ID 792.