Issue 30

G. Ferro et alii, Frattura ed Integrità Strutturale, 30 (2014) 75-83; DOI: 10.3221/IGF-ESIS.30.11 75 Focussed on: Fracture and Structural Integrity related Issues Improvements in self-consolidating cementitious composites by using micro carbonized aggregates Giuseppe Andrea Ferro, Sajjad Ahmad, Rao Arsalan Khushnood, Luciana Restuccia Department of Structural, Geotechnical and Building Engineering, Politecnico di Torino, C.so Duca degli Abruzzi, 24-10129, Torino, Italy ferro@polito.it, sajjad.ahmad@polito.it , rao.khushnood@polito.com , luciana.restuccia@polito.it Jean Marc Tulliani Department of Applied Science and Technology, Politecnico di Torino, C.so Duca degli Abruzzi, 24-10129, Torino, Italy jeanmarc.tulliani@polito.it A BSTRACT . There is growing interest in the use of self-consolidating cementitious systems in construction industry. The present research was conducted to enhance the mechanical performance of cement composites by the utilization of micro-sized inert particles. This paper deals with the synthesis of micro-sized inert carbonized particles from hemp hurds. The synthesized carbonized particles were characterized by field emission scanning electron microscope (FESEM). These particles were further used as additive in self-consolidating cement composites. Total of four different wt% additions (i.e. 0.08, 0.20, 1.00 and 3.00 by wt% of cement) were investigated. The cement composites containing carbonized particles inclusions were characterized by three point bending and compression tests. The results indicate that the carbonized particles additions enhanced the flexural and compressive strengths of the cement composites. It was also observed that the fracture properties and the energy absorption capability of the cement composites were enhanced substantially. K EYWORDS . Self-consolidating cement composites; Pyrolysis; Hemp hurds; Fracture energy; Toughness indices. I NTRODUCTION oncrete is the most produced and utilized manmade composite in the world. It is majorly composed of cement, aggregate and sand [1]. In recent years, production of cement has reached to 4.0 billion metric ton [2]. The production of ordinary Portland cement (OPC) is an energy intensive process and a major cause of anthropogenic production of CO 2 in the atmosphere [3]. For the standpoint of eco-efficiency and sustainability, it is highly desirable to improve the mechanical performance of the cement composites. High performance of cement composites can be achieved by good proportioning of the mix quantities i.e. cement, sand, water and mineral or chemical additives. Various types of powders/fillers such as fly ash, silica fume, metakaolin, limestone, glass, ground granulated blast furnace slag, bentonite, rice husk ash, coconut shell ash have already been investigated by the researchers for the production of high performance cement composites [4–12]. The utilization of the nano/micro-sized fillers improves the mechanical performance due to the secondary hydration, heterogeneous nucleation and/or due to the filling effect of small particles C

RkJQdWJsaXNoZXIy MjM0NDE=