Issue 30

J. Vázquez et alii, Frattura ed Integrità Strutturale, 30 (2014) 109-117; DOI: 10.3221/IGF-ESIS.30.15 117 [3]Navarro, C., Muñoz, S., Domínguez, J., Propagation in fretting fatigue from a surface defect, Tribol. Int., 39 (2006) 1149–1157. [4]Hattori, T., Kien, V.T., Yamashita, M., Fretting fatigue life estimations based on fretting mechanisms, Tribol. Int., 44 (2011) 1389–1393. [5]Hills, D.A. et al., Correlation of fretting fatigue experimental results using an asymptotic approach, Int. J. Fat., 43 (2012) 62–75. [6]Szolwinski M., Farris T., Observation, analysis and prediction of fretting fatigue in 2024-T351 aluminum alloy, Wear, 221 (1998) 24–36. [7]Navarro, C., García, M., Domínguez, J., A procedure for estimating the total life in fretting fatigue, Fat. Fract. Engng. Mater. Struct., 26 (2003) 459-468. [8]Socie D.F., Morrow, J., Chen, W.C., A procedure for estimating the total fatigue life of notched and cracked members, Engng. Fract. Mech., 11 (1979) 851-859. [9]Muñoz, S., Navarro, C., Domínguez, J., Application of fracture mechanics to estimate fretting fatigue endurance curves, Engng. Fract. Mech., 74 (2007) 2168-2186. [10]Vallellano, C., Domínguez, J., Navarro, A., On the estimation of fatigue failure under fretting conditions using notch methodologies, Fat. Fract. Engng. Mater. Struct., 26 (2003) 469-478. [11]Tam, R. et al., Caracterización de una máquina para realizar ensayos de fretting fatiga con contacto cilíndrico, Anales de la mecánica de la fractura, (2011) 323-328. [12]Orynyak, I.V., Borodii, M.V., Torop, V.M., Approximate Construction of a Weight Function for Quarter-Elliptical, Semi-Elliptical and Elliptical Cracks Subjected to Normal Stresses. Eng. Fract. Mech., 49 (1994) 143-151. [13]Bueckner, H.J., Sih, G.C. (Ed.), Methods of analysis and solutions of crack problems, Noordhoff Int. Publishing, (1973). [14]McClung, RC, Francis, WL, Hudak, Jr. SJ, A new approach to fatigue life prediction based on nucleation and growth. In: 9th International fatigue congress, Atlanta, 2006. [15]Fatemi, A. Socie, D. A., Critical plane approach to multiaxial fatigue damage including out-of-phase loading, Fatigue. Fract. Eng. Mater. Struct., 11 (1998) 145–65. [16]Navarro, C., Muñoz, S., Domínguez, J., Influence of the initiation length in predictions of life in fretting fatigue, Strain, 47 (2011) 283–91. [17]Navarro, C., Vázquez, J., Domínguez, J., 3D vs. 2D fatigue crack initiation and propagation in notched plates, Int. J. Fat, 58 (2014) 40-46.