numero25

P. Lazzarin et alii, Frattura ed Integrità Strutturale, 25 (2013) 61-68; DOI: 10.3221/IGF-ESIS.25.10 68 [15] Nakamura, T., Parks, D.M., Antisymmetrical 3-D stress field near the crack front of a thin elastic plate, Int. J. Solids Struct, 25 (1989)1411–26. [16] Pook, L.P., Some implications of corner point singularities, Eng. Fract. Mech., 48 (1994) 367-78. [17] Pook, L.P., Finite element analysis of corner point displacements and stress intensity factors for narrow notches in square sheets and plates, Fatigue Fract. Engng. Mater. Struct., 23 (2000) 979–92. [18] Kotousov, A., Lew, Y.T., Stress singularities resulting from various boundary conditions in angular corners of plates of arbitrary thickness in extension. Int. J. Solids. Struct., 43 (2006) 5100–09. [19] Berto, F., Lazzarin, P., Harding, S., Kotousov, A., Out-of-plane singular stress fields in V-notched plates and welded lap joints induced by in-plane shear load conditions, Fatigue Fract. Engng. Mater. Struct., 34 (2011) 291-304. [20] Berto, F, Lazzarin, P, Kotousov, A, Pook, L., On mode O existence at the tip of blunt cracks and U-notches under in- plane shear loading, Fatigue Fract. Engng. Mater. Struct., 35 (2012) 538–555. [21] Berto, F., Lazzarin, P., Kotousov, A., On higher order terms and out-of-plane singular mode, Mech. Mater., 43 (2011) 332-342. [22] Lazzarin, P., Zappalorto, M., A three-dimensional stress field solution for pointed and sharply radiused V-notches in plates of finite thickness, Fatigue Fract. Engng Mater. Struct. 35 (2012) 1105–19. [23] Zappalorto, M., Lazzarin, P., Three-dimensional elastic stress fields ahead of notches in thick plates under various loading conditions, Eng. Fract. Mech., accepted for publication. [24] Zappalorto, M., Lazzarin, P., Filippi, S., Stress field equations for U and blunt V-shaped notches in axisymmetric shafts under torsion, Int. J. Fract. 164 (2010) 253-69. [25] Zappalorto, M., Lazzarin, P., Stress fields due to inclined notches and shoulder fillets in shafts under torsion, J. Strain. Anal. Eng. Des., 46 (2011) 187-99. [26] Chen, D., Nisitani, H., Singular stress field near a corner of jointed dissimilar materials under antiplane loads. Bull Japan Soc. Mech. Eng., 35 (1992) 399-403. [27] Benthem, J.P., State of stress at the vertex of a quarter-infinite crack in half space. Int. J. Solids Struct. 13 (1977) 479– 92. [28] Savin, G.N., Stress concentration around holes. New York; Pergamon Press, (1961). [29] Gross, R., Mendelson A., Plane Elastostatic Analysis of V-Notched Plates. Int. J. Fract. Mech., 8 (1972) 267–276.