Issue 50

V. Kytopoulos et alii, Frattura ed Integrità Strutturale, 50 (2019) 414-422; DOI: 10.3221/IGF-ESIS.50.35 422 R EFERENCES [1] Stachowiak, G. and Batchelor, A.W. (2013). Engineering Tribology, 3 rd edition, Oxford, UK, Elsevier-Butterworth- Heinemann [2] Stachowiak, G. (Ed) )2005). Wear-Materials, Mechanisms and Practice. John Willy & Sons Ltd, England [3] Shizhu Wen, Ping Huang (2018). Principles of Tribology, 2 nd edition John Wiley & Sons, Singapore [4] Hutchings, I., Shipway, P. (2017). Tribology-Friction and wear of Engineering Materials, 2 nd edition. Elsevier, Butter- worth-Heinemann, United States [5] Krajcinovic, D. (1985). Continuous damage mechanics revisited: Basic concepts and definitions, Journal of Applied Mechanics, 52, pp. 829-834 [6] Yang, Q., Chen, X., Zhou, W. (2005). On microscopic thermodynamic mechanisms of damage evolution laws, International Journal of Damage Mechanics, 14, pp. 261-293 [7] Kytopoulos, V.N. (1991). Contribution of SEM-technique to investigation of elastic-plastic micro-failure processes in materials, PhD Thesis, Laboratory of strength of materials, National Technical University of Athens, Greece [8] Vickerman, J., Gilmore, I. (2009). Surface Analysis - The Principal Techniques, John Wiley & Sons [9] Yacobi, B.G. and Holt, D.B. (1994). An Introduction to Microanalysis of Solids. In: Yacobi B.G., Holt D.B., Kazmerski L.L. (eds.) Microanalysis of Solids. Springer, Boston, MA. [10] Flewitt, P.E. and Wild, R.K. (1994). Physical Methods for Materials Characterization, Institute of Physics Publishing, Bristol and Philadelphia [11] Wetzig, K. and Schulze, D. (eds.) (1995). In situ Scanning Electron Microscopy in mAterials Reseaech, Akademie Verlag, Berlin. [12] Papadopoulos, G. and Kytopoulos, V.N. (2001). Micro-failure behavior of Al 2 O 3 -Ceramics studied by X-ray EPMA. ICCE/8, Annual International Conference, Spain, 5-11/8/2001, pp. 715-716 [13] Riga, Ch. (2007). MSc-Thesis, School of Applied Mathematics and Physics, Section of Mechanics, National Technical University of Athens, Greece [14] Kytopoulos, V.N., Riga, Ch. and Kourkoulis, S.K. (2007). Notch Root Opening Displacement versus Damage for Particulate MMC. In: Gdoutos E.E. (ed.) Experimental Analysis of Nano and Engineering Materials and Structures, Springer, Dordrecht, pp. 133-135 [15] Andrianopoulos, N.P., Kourkoulis and S.K., Saragas, S. (1997). COD measurements and optimum exploitation of metal matrix composites for aerospace applications, Engineering Fracture Mechanics, 57, pp. 565-576 [16] Kourkoulis, S.K. and Andrianopoulos, N.P. (2000). Plastically induced anisotropy on metal matrix composites, Mechanics of Composites Materials and Structures, 7(1), pp. 1-18 [17] Kourkoulis, S.K. (2001). The influence of cracks on the mechanical behavior of particulate MMCs: An experimental study, Archives of Mechanics, 53(4-5), pp. 439-456 [18] Kourkoulis, S.K. (2002). Quantifying the plastic anisotropy for particulate metal matrix composites, Advanced Com- posites Letters, 11(4), pp. 153-163 [19] Kourkoulis, S.K. (2003). The process zone around the tip of cracks in metal matrix composites. Archives of Mechanics, 55(5-6), 407-430 [20] Kourkoulis, S.K., Prassianakis, I., Agioutantis, Z. and Exadaktylos, G.E. (2006). Reliability assessment of the NDT results for the internal damage of marble specimens, International Journal of Material and Product Technology, 26 (1/2), pp. 35-56 [21] Kourkoulis, S.K., Ganniari-Papageorgiou, E. and Mentzini, M. (2010). Dionysos marble beams under bending: A con- tribution towards understanding the fracture of the Parthenon architraves, Engineering Geology, 115(3-4), pp. 246-256 [22] Goldstein, J.I. (1992). Scanning Electron Microscopy and X-Ray Microanalysis: A Text for Biologists, Material Scientists and Geologists, 2 nd edition, Plenum Press-New York [23] Reimer, L. (1998). Scanning Electron Microscopy, Physics of Image Formation and Microanalysis, 2 nd edition, Springer- Verlag [24] McGonnagle, W.J. (1971). Nondestructive Testing, Gordon and Breach, Science Publ., New York, London, Paris [25] Hellan, K. (1984). Introduction to Fracture Mechanics, McGraw-Hill, New York [26] Polukhin, P., Gorelik, S., and Vorontsov, V. (1983). Physical principles of plastic Deformation, Mir Publishers, Moscow [27] Hertzberg, R.W. (1989). Deformation and Fracture of engineering materials, Willey, 1989 [28] Shackelford, J.F. (2001). Introduction to Materials Science for Engineers, 5 th edition, Prentice Hall Inc [29] Das, A.K. (1996). Metallurgy of Failure Analysis. Mc Graw-Hill [30] Parton, V.Z. and Morozov, E.M. (1978). Elastic-Plastic Fracture Mechanics, Mir Publishers, Moscow (in English)