Cover
|
1 |
TOC
|
3 |
Editorial Team
|
8 |
Sister Associations
|
11 |
Editorials
|
13 |
O. Plekhov, A. Vshivkov - The effect of fatigue crack rate on the heat dissipation in metals under mixed-mode loading
|
17 |
M.F. Borges, F.V. Antunes, P. Prates, R. Branco, M.C. Oliveira - Effect of yield stress on fatigue crack growth
|
25 |
Z.-y. Han, X.-g. Huang - Stress corrosion behavior of X80 pipeline steel in the natural seawater with different dissolved oxygen contents
|
36 |
G. Khandouzi, M. Mollashahi, M. Moosakhani - Numerical simulation of crack propagation behavior of a semi-cylindrical specimen under dynamic loading
|
45 |
M. Eremin, A. Kulkov, I. Smolin, V. Mikushina - Investigation of Failure Mechanism of Al2O3 Specimens Subjected to Three-Point Bending Test
|
54 |
I. G. F. da Silva, A. H. P. de Andrade, W. A. Monteiro - Leak-Before-Break methodology applied to different piping materials: a performance evaluation
|
62 |
N. Boychenko, I. Ishtyryakov - Characterization of the stress-strain state in a gas turbine engine compressor disc taking into account damage accumulation
|
70 |
M. Baghdadi, B. Serier, M. Salem, B. Zaoui, K. Kaddouri - Modeling of a cracked and repaired Al 2024T3 aircraft plate: effect of the composite patch shape on the repair performance.
|
84 |
A. Sarkar, A. Nagesha, R. Sandhya, M. Okazaki - Crack growth based life prediction approach under LCF-HCF interaction
|
102 |
R. Boutelidja, A. Guedri, M. A. Belyamna, B. Merzoug - Environmental effects on the reliability of an AISI 304 structure
|
114 |
B. Benamar, M. Mokhtari, K. Madani, H. Banzaama - Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint
|
128 |
O. Mouhat, A. Bybi, A. El Bouhmidi, M. Rougui - Effects of ply orientation on nonlinear buckling of aircraft composite stiffened panel
|
142 |
A. Tijani, M. Meknassi, H., Chaffoui, M. Elghorba - Corrosion’s impact on wire rope strand response - Comparison with a theoretical predictive model
|
157 |
M. Ameri, M. Nemati, H. Shaker, F. Jafari - Experimental and numerical investigation of the properties of the Hot Mix Asphalt Concrete with basalt and glass fiber
|
165 |
J. Papuga, M. Nesládek, J. Kuželka, J. Jurenka - Differences in the response to in-phase and out-of-phase multiaxial high-cycle fatigue loading
|
179 |
A. Benzaama, M. Mokhtari, H. Benzaama, E. Abdelouahed, T. Tamine, K. Madani, A. Slamen, M. Ilies - Using XFEM Techniques to Predict the Damage of aluminum 2024T3 notched under tensile load
|
200 |
M. Godio, K. Beyer - Quantifying the out-of-plane response of unreinforced masonry walls subjected to relative support motion
|
210 |
B. Badarloo, F. Jafari - Finite Element Analysis and ANFIS investigation of seismic behavior of sandwich panels with different concrete material in two story steel building
|
225 |
A. Salmi, M. Elajrami, M. E. A. Slimani - Crack growth study under thermo-mechanical loads: parametric analysis for 2024 T3 aluminum alloy
|
247 |
P. Livieri, F. Segala- Stress intensity factor for small embedded cracks in weldments
|
258 |
L. Romanin, P. Ferro, A. Fabrizi, F. Berto - A metallurgical and thermal analysis of Inconel 625 electron-beam welded joints
|
267 |
C. C. Silva, R. B. Caldas, R. H. Fakury, H. Carvalho, J. V. F. Dias - Web rotational stiffness of continuous steel-concrete composite castellated beams
|
280 |
K. Meftah, L. Sedira - A nonlinear elasto-plastic analysis of Reissner-Mindlin plates by finite element method
|
292 |
H. Saidi, M. Sahla - Vibration analysis of functionally graded plates with porosity composed of a mixture of Aluminum (Al) and Alumina (Al2O3) embedded in an elastic medium
|
302 |
P. Qiu - Experimental research on fracture behavior of concrete after high temperature
|
316 |
V. Iasnii, P. Yasniy, D. Baran, A. Rudawska - The effect of temperature on low-cycle fatigue of shape memory alloy
|
326 |
K. Singh, C. Robertson, A.K. Bhaduri - Brittle fracture model parameter estimation for irradiated BCC material through dislocation based crystal plasticity model
|
335 |
F. Larbi Chaht, M. Mokhtari, H. Benzaama - Using a Hashin Criteria to predict the Damage of composite notched plate under traction and torsion behavior
|
347 |
N. D. Alexopoulos, N. Siskou, C.-M. Charalampidou, S. K. Kourkoulis - Simulation of the corrosion-induced damage on aluminum alloy 2024 specimens with equivalent surface notches
|
358 |
G. Belokas - Probabilistic geotechnical engineering analysis based on first order reliability method
|
370 |
I. Dakanali, A. Marinelli - Tension - torsion fatigue tests on the proton exchange membrane Nafion 115 (Perfluorosulfonic acid)
|
386 |
S. Gavela, N. Nikoloutsopoulos, G. Papadakos, D. Passa, A. Sotiropoulou - Experimental uncertainty budget for concrete compressive strength test based on a multifactorial analysis
|
399 |
K. Kaklis, Z. Agioutantis, S. Mavrigiannakis, P. Maravelaki-Kalaitzaki - A simplified damage evolution relationship and deformation characteristics of a pozzolanic lime mortar when subjected to unloading-reloading cycles in the pre-peak region
|
411 |
N. Chatzidai, D. Karalekas - Experimental and numerical study on the influence of critical 3D printing processing parameters
|
423 |
V. N. Kytopoulos, E. Sideridis, J. Venetis, C. Riga, A. Altzoumailis - A SEM-X-Ray assisted experimental approach for the determination of mechanical and thermal load – induced damage in MMCs
|
430 |
A. G. Lekatou, S. Tsouli, C. Nikolaidis, S. Kleftakis, I. K. Tragazikis, T. E. Matikas - Effect of fly ash on the corrosion performance and structural integrity of stainless steel concrete rebars in acid rain and saline environments
|
439 |
A. Marinelli, M. R. Stewart - Comparative experimental study of the mechanical and fracture properties of Portland limestone and Corsehill sandstone
|
454 |
C. F. Markides - Double initial and caustic curves in diametrically compressed transparent discs - Application to the contact length
|
467 |
N. Martini, V. Koukou, G. Fountos, I. Valais, I. Kandarakis, C. Michail, A. Bakas, E. Lavdas, K. Ninos, G. Oikonomou, L. Gogou, G. Panayiotakis - Imaging performance of a CaWO4/CMOS sensor
|
487 |
A. Kakaliagos, N. Ninis - Damage and failure of Orban’s gun during the bombardment of Constantinople walls in 1453
|
497 |
I. Papantoniou , H. P. Kyriakopoulou, D. I. Pantelis, D. E. Manolakos - Metal foaming by powder metallurgy process: investigation of different parameters on the foaming efficiency
|
513 |
V. Saltas, D. Peraki , F. Vallianatos - The use of acoustic emissions technique in the monitoring of fracturing in concrete using soundless chemical demolition agent
|
521 |
G. V. Seretis, A. K. Polyzou, D. E. Manolakos, C. G. Provatidis - Multi-parameter analysis of curing cycle for GNPs/glass fabric/ epoxy laminated nanocomposites
|
533 |
M. Papachristoforou, V. Mitsopoulos, M. Stefanidou - Use of by-products for partial replacement of 3D printed concrete constituents; rheology, strength and shrinkage performance
|
542 |
D. Triantis, S. K. Kourkoulis - Fracture precursor phenomena in marble specimens under uniaxial compression by means of Acoustic Emission data
|
553 |
C. Apostolopoulos, A. Drakakaki, A. Apostolopoulos, K. Koulouris - Comparison of the mechanical response of B400c and B450c dual phase steel bar categories, in long terms
|
564 |
E. D. Pasiou - Restoring stone monuments: Enlightening critical details by the combined use of innovative sensing techniques
|
576 |
I. Stavrakas, S. K. Kourkoulis, D. Triantis - Damage evolution in marble under uniaxial compression monitored by Pressure Stimulated Currents and Acoustic Emissions
|
589 |
N. Fountas, A. Koutsomichalis, J. D. Kechagias, N.M. Vaxevanidis - Multi-response optimization of CuZn39Pb3 brass alloy turning by implementing Grey Wolf algorithm
|
600 |
S. M. A. Khiat, R. Zenasni, M. Hamdi - Effect of environmental conditions on the resistance of damaged composite materials
|
611 |
M.R.M. Aliha, H. Ghazi, F. Ataei - Experimental fracture resistance study for cracked bovine femur bone samples
|
618 |
P. Livieri, F. Segala - Stress intensity factor for small embedded cracks in weldments
|
629 |
M. Belhamiani, D. E. Belhadri, W. Oudad, O. Mansouri, W. N. Bouzitouna - J integral computation and limit load analysis of bonded composite repair in cracked pipes under pressure
|
639 |
Q. Hu, Z. Shou, J. Zeng, L. He , H. Tang, B. Li, S. Chen, X. Lu - Comparative study on the deterioration of granite under microwave irradiation and resistance-heating treatment
|
654 |
L. He, Y. Gu, Q. Hu, Y. Chen, J. Zeng - Structural failure process of schistosity rock under microwave radiation at high temperatures
|
665 |
J.M. Vasco-Olmo, F.A. Díaz, F.V. Antunes, M.N. James - Experimental characterisation of fatigue crack growth based on the CTOD measured from crack tip displacement fields using DIC
|
674 |
A. Kostina, O. Plekhov, S. Aizikovich -Numerical simulation of subsurface defect identification by pulsed thermography and improvement of this technique for noisy data
|
683 |