Issue 50

S. R. Pereira et alii, Frattura ed Integrità Strutturale, 50 (2019) 242-250; DOI: 10.3221/IGF-ESIS.50.20 250 [2] Associação Brasileira de Normas Técnicas. (2017). NBR 9062 - Projeto e execução de estruturas de concreto pré- moldado, Rio de Janeiro. [3] Associação Brasileira de Normas Técnicas. (2014). NBR 6118 - Projeto de Estruturas de Concreto - Procedimento, Rio de Janeiro. [4] Feng, D., Wang, Z., Wu, G. (2019). Progressive collapse performance analysis of precast reinforced concrete structures, Struct. Des. Tall Spec. Build., 28(5), pp. e1588, DOI: 10.1002/tal.1588. [5] Li, J., Hao, H., Wu, C. (2017). Numerical study of precast segmental column under blast loads, Eng. Struct., 134, pp. 125–137, DOI: 10.1016/j.engstruct.2016.12.028. [6] Ghayeb, H.H., Razak, H.A., Sulong, N.H.R. (2017). Development and testing of hybrid precast concrete beam-to- column connections under cyclic loading, Constr. Build. Mater., 151, pp. 258–278, DOI: 10.1016/j.conbuildmat.2017.06.073. [7] Wibowo, A., Wilson, J., Lam, N., Gad, E. (2009). Modelling Precast Reinforced Concrete Columns and Comparison with Results from Field Testings. The First International Conference on computational Technologies in Concrete Structures, Korea, 24-27 May. [8] Chen, A.C.T., Chen, W.F.(1973). Constitutive relations of concrete and punch-indentation problems. Fritz Engineering Laboratory Report No. 370.11. Lehigh University Bethlehem, Pennsylvania. [9] Chen, A.C.T., Chen, W.F. (1975). Constitutive relations for concrete. Journal of the Engineering Mechanics Division, ASCE, 101(4), pp.465-481. [10] Willam, K.J., Warnke, E.P. (1975). Constitutive models for the triaxial behavior of concrete, Proceedings of the International Association of Bridge Structures, 19, pp.1-30. [11] Ottosen, N. S. (1977). A failure criterion for concrete. Journal of Engineering Mechanics Division, ASCE, v. 103, n.4, p.527-535. [12] Hsieh, S. S., Ting, E. C., Chen, W.F. (1982) A Plastic-Fracture Model for Concrete. International Journal of Solids and Structures, 18(3), pp.181-197. [13] Boswell, L. F., Chen, Z. (1987). General Failure Criterion for Plain Concrete. International Journal of Solids and Structures, 23(5), pp.621-630. [14] ANSYS version 18.2, Program Documentation: Theory Manual. [15] Barbosa, A.F., Ribeiro, G.O. (1998). Analysis of reinforced concrete structures using ANSYS nonlinear concrete model. Computational Mechanics. CIMNE. Spain, Barcelona. [16] Wolanski, A.J.B.S. (2004). Flexural Behavior of Reinforced and Prestressed Concrete Beams Using Finite Element Analysis, M.S. Dissertation, Marquette University, Milwaukee, Wisconsin, USA. [17] Queiroz, G., Carvalho, H., Rodrigues, F., Pfeil, M. (2014). Estimation of friction contribution in the behavior of steel- concrete composite beams with flexible shear connectors. REM: Esc. Minas, Ouro Preto, 67(3), pp.253-258. [18] Lazzari, P. M., Filho, A.C., Lazzari, B.M., Pacheco, A.R. (2017). Structural analysis of a prestressed segmented girder using contact elements in ANSYS. Computers & Concrete, 20(3). [19] Lazzari, B. M., Filho, A. C., Lazzari, P.M., Pacheco, A.R. (2017). Using element-embedded rebar model in ANSYS for the study of reinforced and prestressed concrete structures. Computers & Concrete, 19(4). [20] Pereira, S.R., Calixto, J. M, Bortone, T.P. (2013). Análise numérica de lajes alveolares protendidas submetidas a carregamentos de longa duração. Revista Ibracon de Estruturas e Materiais. 6(4), pp.613-622. [21] Contamine, R., Si-Larbi, A., Than, N.Q., Hamelin, P. (2011). Numerical modeling of reinforced concrete beams under shear stress with and without external textile-reinforced concrete reinforcement, J. Reinf. Plast. Compos., 30(15), pp. 1293–303, DOI: 10.1177/0731684411420189. [22] Comité Européen de Normalisation. (2004) EN 1992-1-1:2004. Design of Concrete Structures – Part 1-1: General rules and rules for buildings. Brussels, Comité Européen de Normalisation.