Issue 46

H. Mekri et alii, Frattura ed Integrità Strutturale, 46 (2018) 62-72; DOI: 10.3221/IGF-ESIS.46.07 72 [13] Yin, Y.H., Ikuta, A. and North, T.H. (2010). Microstructural Features and Mechanical Properties of AM60 and AZ31 Friction Stir Spot Welds., 61, pp. 1018-1028. [14] Iwashita, T. (2003). Method and apparatus for joining, US patent, 6, pp. 601-751. [15] Badarinarayan, H. F. and Okamoto K. (2007). In: Friction stir welding and processing, R. S. Mishra and M. W. Mahoney (Eds.), Materials Park, OH, ASM International, pp. 235–272. [16] Torkamany, M. J., Tahamtan, S. and Sabbaghzadeh, J. (2010). Dissimilar welding of carbon steel to 5754 aluminum alloy by Nd: YAG pulsed laser, Mater. Des., 31, pp.458–465. [17] Lin, S.-B., J.-L.Song, G.-C.Ma and C.-L. Yang, (2009). Dissimilar metals TIG welding–brazing of aluminum alloy to galvanized steel, Front. Mater. Sci. Chin., 3, pp. 78–83. [18] Roulin, M., Luster, J. W., Karadeniz, G. and Mortensen, A.: (1999). Strength and fracture of furnace-brazed joints between aluminum and stainless steel, Weld. J., 78, pp. 151–155. [19] Yilmaz, M. and Acet, M.: (2003). Interface properties of aluminum/steel friction-welded components, Mater. Charact., 49, pp. 421–429. [20] Ikeuchi, K., Takahashi, M., Watanabe, H. and Aritoshi, M.. (2009). Effect of C content on intermetallic compound layer and joint strength in friction welding of Al alloy to steel, Welding in the World, 53, pp.135-139. [21] Elliot, S. and Walllach, E. R. (1981). Joining aluminium to steel., 3, pp. 167–171. [22] Aizawa, T., Kashani, M. and Okagawa, K. (2007). Application of magnetic pulse welding for aluminum alloys and SPCC steel sheet joints, Weld. J., 86, pp. 129–124. [23] Watanabe, T., Sakuyama, H. and Yanagisawa, A. (2009). Ultrasonic welding between mild steel sheet and Al–Mg alloy sheet, J. Mater. Process. Technol., 209, pp. 5475–5480. [24] Abe, Y., Kato, T. and Mori, K. (2006). Joinability of aluminium alloy and mild steel sheets by self piercing rivet, J. Mater. Process. Technol., 177, pp. 417– 421. [25] Pfestorf, M. (2005). Manufacturing of high strength steel and aluminum for a mixed material body in white, Adv. Mater. Res., 8, pp. 109–124. [26] Umetrics AB, MODDE 5.0. User Guide and Tutorial, Umetrics, Umea, Sweden., (1999). [27] Susmel, L., Hattingh, D. G., James, M. N., Maggiolini, E. and Tovo, R. (2015). Designing aluminium friction stir welded joints against multiaxial fatigue, Frattura ed Integrità Strutturale, 37, pp. 207-214. [28] Patil, C., Patil, H. and Patil, H. (2016). Experimental investigation of hardness of FSW and TIG joints of Aluminium alloys of AA7075 and AA6061, Frattura ed Integrità Strutturale, 37, pp. 325-332. [29] Abe, T., Akebono, H., Kato, M. and Sugeta, A. (2016). Fatigue properties and fracture mechanism of load carrying type fillet joints with one-sided welding, Frattura ed Integrità Strutturale, 35, pp.196-205 [30] van Lieshout, P.S., den Besten, J.H. and Kaminski, M.L. (2016) Comparative study of multiaxial fatigue methods applied to welded joints in marine structures, Frattura ed Integrità Strutturale., 37, pp. 173-192.