Cover
|
1 |
TOC
|
3 |
Editorial Team
|
6 |
Sister Associations
|
8 |
Editorial
|
10 |
B. T. Bounini, B. Bouchouicha, A. Ghazi - Simulation of the behavior of aluminum alloys welded in Friction Stir Welding FSW (Case of AA5083 and AA 6082)
|
11 |
G. B. Manjunatha, K. N. Bharath - Investigating the contribution of geometrical parameters and immersion time on fracture toughness of jute fabric composites using statistical techniques
|
24 |
N. Hiyoshi, M. Yamashita, H. Hokazono - Effect of additive elements Bi/Ni/Ge on crack initiation and propagation for low-Ag solders
|
35 |
M. El Habiri, M. Benachour, N. Benachour - Effect of cold expansion on improving of fatigue initiation life in Aluminium alloy
|
44 |
G. Deng, T. Nakanishi - Bending fatigue strength design method for machine components with complex geometries
|
55 |
M. Hack, D. Carrella-Payan, B. Magneville, T. Naito, Y. Urushiyama, W. Yamazaki, T. Yokozeki, W. Van Paepegem - A progressive damage fatigue model for unidirectional laminated composites based on finite element analysis: theory and practice
|
64 |
H. Mekri, B. Bouchouicha, A. Miloudi, H. Christophe, A. Imad - Influence of the coupling between the mechanical characteristics and the welding conditions by the FSSW process: case of the bi-material aluminum-steel
|
72 |
K.I. Tserpes, A. Chanteli, Sp. Pantelakis, E.P. Koumoulos, C.A. Charitidis - Mechanical and nanomechanical properties of MWCNT/PP nanocomposite
|
83 |
M. F. M. Yunoh, S. Abdullah, M. H. M. Saad, Z. M. Nopiah, M. Z. Nuawi, S. S. K. Singh - Probabilistic-based analysis for damaging features of fatigue strain loadings
|
94 |
W. Song, X. Liu - High cycle fatigue assessment of steel load-carrying cruciform welded joints: an overview of recent results
|
104 |
S. M. Medjdoub, B. Bachir Bouiadjra, M. Abdelkader - Optimization of the geometrical parameters of bonded composite wrap for repairing cracked pipelines
|
112 |
S. Mokadem, B. Mohamed, M. Belaïd, B. B. Bouadjra - Effect of the angles of the cracks of corroded plate in bonded composite repair
|
123 |
S. Motsa, G. Drosopoulos - Failure behaviour of a fire protected steel
|
134 |
N. C. M. Ibrahim, S. Boualem, M. Belaïd - Analysis of the crack-crack interaction effect initiated in aeronautical structures and repaired by composite patch
|
150 |
Z. Lu, B. Feng, C. Loh - Fatigue behaviour and mean stress effect of thermoplastic polymers and composites
|
160 |
V. Rizov - Analysis of cylindrical delamination cracks in multilayered functionally graded non-linear elastic circular shafts under combined loads
|
168 |
L. Giresini, M. Sassu - An on-site teaching laboratory in a village damaged by the 2009 Abruzzo earthquake
|
188 |
M. L. Puppio, S. Novelli, M. Sassu - Failure evidences of reduced span bridges in case of extreme rainfalls - The case of Livorno
|
200 |
S. Ivorra, D. Foti, M. Diafero, V. Vacca, D. Bru - Resonances detected on a historical tower under bells’ forced vibrations
|
213 |
F. Stochino, M. L. Fadda, F. Mistretta - Assessment of RC Bridges integrity by means of low-cost investigations
|
226 |
L.U. Argiento, A. Maione, C. Casapulla - Formulating the in-plane frictional resistances and collapse mechanisms for multi-storey masonry block walls
|
236 |
A. Maione, L.U. Argiento, C. Casapulla, A. Prota - Management of multi-source information to identify the typology of the horizontal structures in historical masonry buildings: the case study of the Museum of Capodimonte in Naples (Italy)
|
250 |
A. Baltach, A. Djebli, M. Bendouba, E.H. Besseghier, A. Aid - Numerical analysis and optimization of the residual stresses distribution induced by cold expansion technique
|
262 |
A. Akhavan-Safar, A. Queirós Barbosa, L. F. Martins da Silva, M. R. Ayatollahi - Micro failure analysis of adhesively bonded joints enhanced with natural cork particles: Impact of overlap length and particles volume fraction
|
276 |
S. Jiang, T. Cai, S. Wu, W. Yao - Experimental research on the instantaneous and long-term deflections of pre-cracked concrete beams enhanced by carbon fibre reinforced polymer
|
285 |
L. Sorrentino, C. Bellini, W. Polini, S. Turchetta - Performance Index of Natural Stones-GFRP Hybrid Structures
|
295 |
V. E. Wildemann, T. V. Tretyakova, E. M. Strungar, M. P. Tretyakov - Deformation and failure of carbon fiber composite specimens with embedded defects during tension-torsion test
|
305 |
A. Deliou, B. Bouchouicha - Fatigue crack propagation in welded joints X70
|
316 |
C. Bellini, L. Sorrentino - Characterization of Isogrid Structure in GFRP
|
329 |
A. Kostina, O. Plekhov, S. Aizikovich Numerical simulation of a heat generation in a layered material during ultrasonic wave propagation
|
342 |
Y. Yanya - Blending ratio of recycled aggregate on the performance of pervious concrete
|
353 |
J. Liu, J. Xie, Y. Liu, P. Shi - Experimental study on concrete damage location by Computerized tomography technology
|
362 |
H. Zhu - Stress performance of embedded carbon fiber reinforced plastics plate consolidated reinforced concrete
|
371 |
I. Čamagić, S. A. Sedmak, A. Sedmak, Z. Burzić, M. Aranđelović - The impact of the temperature and exploitation time on the tensile properties and plain strain fracture toughness, KIc in characteristic areas of welded joint
|
381 |
I. Shardakov, A. Shestakov, R. Tsvetkov, I. Glot - Investigation of the effect of cracks on the vibration processes in reinforced concrete structures
|
393 |
W. Hao, X. Xu, Z. Niu - Experimental study on the mechanical behavior of RPC filled square steel tube columns subjected to eccentric compression
|
401 |
F. Bazzucchi, L. Restuccia, G. A. Ferro - Considerations over the Italian road bridge infrastructure safety after the Polcevera viaduct collapse: past errors and future perspectives
|
410 |