Issue 46

G. Deng et alii, Frattura ed Integrità Strutturale, 46 (2018) 45-53; DOI: 10.3221/IGF-ESIS.46.05 53 specimen, Transactions of the JSME A (in Japanese), 49-444, pp. 901-910. [5] Deng, G., Sakanashi, Y. and Nakanishi, T., (2009). A practical method for fatigue crack initiation detection using an ion- sputtered film, Transaction of the ASME, Journal of Engineering Materials and Technology, 131-1 pp. 011007-1- 011007-6. [6] Hammouda, M. M. and Miller, K. J., (1980). Prediction of fatigue lifetime of notched members, Fatigue of Engineering Materials and Structures, pp. 377-386. [7] Nisitani H., (1977). Non-propagating crack (notched surface), Materials (in Japanese), 26-282, pp. 296-306. [8] Tanaka, K. and Akiniwa, Y., (1987). A method for the prediction of fatigue limits of notched members, Transactions of the JSME A (in Japanese), 53-488, pp. 709-717. [9] Kato, M., Deng, G., Inoue, K. and Takatsu, N., (1993). Evaluation of the strength of carburized spur gear teeth based on fracture mechanics, JSME International Journal, Series C, 36-2, pp. 233-240. [10] Siebel, E. and Stieler, M., (1955). Ungleichformige Spannungsverteilung bei schwingender Beanspruchung, Verein Deutscher Ingenieure, Dusseldorf (in German), VDI-Z, 97-5, pp. 121-126. [11] Inoue, K., Deng, G. and Kato, M., (1989). Evaluation of the strength of carburized spur gear teeth based on fracture mechanics (1st report, stress intensity factor considering the effect of residual stress distribution in the case), Transactions of the JSME C (in Japanese), 55-514, pp. 1488-1493. [12] Akiniwa, Y., Tanaka, K. and Kinefuchi, M., (1989). Effect of microstructure on propagation and non-propagation of short fatigue cracks at notches, Materials (in Japanese), 38-434, pp. 1275-1281. [13] Little, R. E., (1972). ASTM Spec. Tech. Publ., 5-11, p. 29. [14] Jeong, B., Kato, M., Inoue, K. and Takatsu, N., (1992). The Bending Strength of Carburized Fine Module Gear Teeth: Carburizing Conditions and Their Effects on the Fatigue Strength, JSME International Journal, 35-1, pp. 136-141.