Issue 46

I. Čamagić et alii, Frattura ed Integrità Strutturale, 46 (2018) 371-382; DOI: 10.3221/IGF-ESIS.46.34 382 A CKNOWLEDGEMENT arts of this research were supported by the Ministry of Sciences and Technology of Republic of Serbia through Mathematical Institute SANU Belgrade Grant OI 174001 Dynamics of hybrid systems with complex structures. Mechanics of materials and Faculty of Technical Sciences University of Pristina residing in Kosovska Mitrovica. R EFERENCES [1] Čamagić, I. (2013). Investigation of the effects of exploitation conditions on the structural life and integrity assessment of pressure vessels for high temperatures (in Serbian), doctoral thesis, Faculty of Technical Sciences, Kosovska Mitrovica. [2] SRPS EN ISO 15614-1:2017, Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017, Corrected version 2017-10-01), 2017. [3] Burzić, M., (2008). Analiza parametara prsline toplo–otpornog čelika, Integritet i vek konstrukcija, 6(1), pp. 45-56. [4] Čamagić, I., Sedmak, S., Sedmak, A., Burzić, Z. and Todić, A. (2017). Impact of Temperature and Exploitation Time on Plane Strain Fracture Toughness, K Ic , in a Welded Joint, Structural Integrity And Life, 17(3), pp. 239–244. [5] SRPS EN 895:2008, Destructive tests on welds in metallic materials - Transverse tensile test, (2008). [6] SRPS EN 10002-1, Metallic materials - Tensile testing - Part 1: Method of test (at ambient temperature), (1996). [7] SRPS EN 10002-5, Metallic materials - Tensile testing - Part 5: Method of testing at elevated temperature, (1997). [8] ASTM E399-89, Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials, Annual Book of ASTM Standards, 03.01, pp. 522, (1986). [9] ASTM E 1820-99a, Standard Test Method for Measurement of Fracture Toughness, Annual Book of ASTM Standards, 03.01, (1999). [10] BS 7448-Part 1, Fracture mechanics toughness tests-Method for determination of KIc critical CTOD and critical J values of metallic materials, BSI, (1991). [11] ASTM E813-89, Standard Test Method for J Ic , A Measure of Fracture Toughness, Annual Book of ASTM Standards, 03.01, pp. 651, (1993). [12] ASTM E 1737-96, Standard Test Method for J Integral Characterization of Fracture Toughness, Annual Book of ASTM Standards, 03.01, (1996). [13] BS 7448-Part 2, Fracture mechanics toughness tests - Methods for determination of KIc, critical CTOD and critical J values of welds in metallic materials, BBI, (1997). [14] ESIS Procedure for Determining the Fracture Behavior of Materials, European Structural Integrity Society ESIS P2- 92, (1992). [15] BS 5762-DD 19, Standard Test Method for Crack Opening Displacement, London, (1976). [16] ASTM E1152-91, Standard Test Method for Determining J-R Curve, Annual Book of ASTM Standards, 03.01, pp. 724, (1995). [17] ASTM E 1290-89, Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement, Annual Book of ASTM Standards, 03.01, (1993). [18] Camagic, I., Burzic, Z., Sedmak, A., Dascau, H. and Milovic, L. (2015). Temperature effect on a low-alloyed steel welded joints tensile properties, The 3rd IIW South – East European Welding Congress, Welding & Joining Technologies for a Sustainable Development & Environment, Timisoara, Romania, (77-81). [19] Burzić, Z. (2002). Savremene metode provere mehaničko-tehnoloških osobina zavarenih spojeva-Deo 2, Zavarivanje i zavarene konstrukcije, 47(3), pp. 151-158. P