Issue 53

E. M. Strungar et alii, Frattura ed Integrità Strutturale, 53 (2020) 406-416; DOI: 10.3221/IGF-ESIS.53.31 416 [11] Tashkinov, M. A. (2017). Modelling of fracture processes in laminate composite plates with embedded delamination, 11 (39), pp. 248-262. DOI: 10.3221/IGF-ESIS.39.23. [12] Lobanov, D.S., Wildemann, V.E., Spaskova, E. M., Chikhachev, A.I. (2015). Experimental investigation of the defects influence on the composites sandwich panels strength with use digital image correlation and infrared thermography methods. PNRPU Mechanics Bulletin, No. 4, pp. 159-170. DOI: 10.15593/perm.mech/2015.4.10. [13] Wildemann, V. V., Tretyakova, T. V., Strungar, E. M., Tretyakov, M. P. (2018). Deformation and failure of carbon fiber composite specimens with embedded defects during tension-torsion test, Frattura ed Integrità Strutturale, 12(46), pp. 295-305. DOI: 10.3221/IGF-ESIS.46.27. [14] Lobanov, D.S., Strungar, E.M., Zubova, E.M., Wildemann, V.E. (2019). Studying the Development of a Technological Defect in Complex Stressed Construction CFRP Using Digital Image Correlation and Acoustic Emission Methods, Russian Journal of Nondestructive Testing, 55, pp. 631-638. DOI: 10.1134/S1061830919090031. [15] Sutton, M.A., Orteu, J.-J., Schreier, H. (2009). Image Correlation for Shape, Motion and Deformation Measurements. – University of South Carolina, Columbia, SC, USA, 364 p. [16] Huh, Y.-H., Kim, J., Hong, S., Park, J. H. (2015). Measurement of hole damage characteristics in the glass fibre reinforced plastic composite using digital image correlation technique, Material wissenschaft und Werkstofftech, 46(4–5), pp. 446-453. DOI: 10.1002/mawe.201500420. [17] Khechai, A., Tati, A., Guerira, B., Guettal,a A., Mohite, P.M. (2018). Strength degradation and stress analysis of composite plates with circular, square and rectangular notches using digital image correlation, Composite Structures, 185, pp. 699-715. DOI: 10.1016/j.compstruct.2017.11.060. [18] Mehdikhani, M., Aravand, V., Sabuncuoglu, B., Callens, M. G., Lomov, S.V., Gorbatikh, L. (2016). Full-field strain measurements at the micro-scale in fiber-reinforced composites using digital image correlation, Composite Structures 140, pp. 192-201. DOI: 10.1016/j.compstruct.2015.12.020. [19] Tretyakova, T. V., Spaskova, Е . М . (2013). Experimental study of limit stress-strain state quasi-brittle material using correlation techniques digital images. PNRPU Mechanics Bulletin, 2, pp. 186-198. [20] Wildemann, V.E., Spaskova, E.V., Shilova, A.I. (2016). Research of the damage and failure processes of composite materials based on acoustic emission monitoring and method of digital image correlation problems of deformation and fracture in materials and structures, Solid State Phenomena, 243, pp. 163-170. DOI: 10.4028 /www.scientific.net/SSP.243.163. [21] Tretyakova, T.V., Dushko, A.N., Strungar, E.M., Zubova, E.M., Lobanov, D.S. (2019). Comprehensive analysis of mechanical behavior and fracture processes of specimens of three-dimensional reinforced carbon fiber in tensile tests, PNRPU Mechanics Bulletin, 1, pp. 173-183. DOI: 10.15593/perm.mech/2019.1.15. [22] Camanho, P.P., Maim ı , P., Dávila, C.G. (2007). Prediction of size effects in notched laminates using continuum damage mechanics, Compos Sci Technol, 67, pp. 2715-2727. DOI: 10.1016/j.compscitech.2007.02.005. [23] Frantziskonis, G., Deymier, P. (2006). Surface effects at the nanoscale significantly reduce the effects of stress concentrators, Probabilistic engineering mechanics. 21(3), pp. 277-286. DOI: 10.1016/j.probengmech.2005.10.004. [24] Green, B.G., Wisnom, M.R., Hallet, S.R. (2007). An experimental investigation into the tensile strength scaling of notched composites, Composites—Part A, 38, pp. 867-878. DOI: 10.1016/j.compositesa.2006.07.008. [25] Babushkin, A.V., Babushkina, A.V., Strungar, E. M., Staroverov, O. A., Lobanov, D. S., Temerova, M.S., Feklistova E.V. (2019). Phenomenological characteristics structural features research obtained at fibrous plastics standard tests, Procedia Structural Integrity, 17, pp. 658–665. DOI: 10.1016/j.prostr.2019.08.088. [26] Strungar, E. M., Feklistova, E.V., Babushkin, A.V., Lobanov, D. S. (2019). Experimental studies of 3D woven composites interweaving types effect on the mechanical properties of a polymer composite material, Procedia Structural Integrity, 17, pp. 965–970. DOI: 10.1016/j.prostr.2019.08.128. [27] Anoshkin, A. N., Voronkov, A. A., Kosheleva, N. A., Matveenko, V. P., Serovaev, G. S., Spaskova, E. M., Shardakov, I. N., Shipunov, G. S. (2016). Measurement of inhomogeneous strain fields by fiber optic sensors embedded in a polymer composite material, Mechanics of Solids, 51(5), pp. 542-549. DOI: 10.3103/S0025654416050058. [28] Strungar, E.M., Yankin, A.S., Zubova, E.M., Babushkin, A. V., Dushko, A. N. (2020). Experimental study of shear properties of 3D woven composite using digital image correlation and acoustic emission. Acta Mech. Sin, 36(2). DOI: 10.1007/s10409-019-00921-7.