Cover
|
1 |
ToC
|
3 |
Editorial Team
|
6 |
Sister Associations
|
9 |
Y. Xu, Y. Cai, D. Li, T. Zhang - Building crack monitoring based on digital image processing
|
13 |
H. Ghahramanzadeh Asl, S. Çam, O. Orhan, A. Özel - Experimental and numerical analysis of epoxy based adhesive failure on mono- and bi-material single lap joints under different displacement rates
|
21 |
W. Xiangming, G. Erfu - Numerical analysis and verification of residual stress in T joint of S355 steel
|
37 |
O. Kryvyi, Y. Morozov - Thermally active interphase inclusion in a smooth contact conditions with transversely isotropic half-spaces
|
45 |
B. E. Sobrinho, G. Gomes, W. V. da Silva, R. S. Y. R. C. Silva, L. M. Bezerra, E. U. L. Palechor - Differential evolution algorithm for identification of structural damage in steel beams
|
63 |
A. Ahmadi, G.H. Farrahi, K. Reza Kashyzadeh, Sh. Azadi, K. Jahani - A comparative study on the fatigue life of the vehicle body spot welds using different numerical techniques: Inertia relief and Modal dynamic analyses
|
79 |
M. F. Bouali, A. Hima - Alternative estimation of effective Young’s Modulus for Lightweight Aggregate Concrete LWAC
|
94 |
M. Saadatmand, R. Talemi - Study on the thermal cycle of Wire Arc Additive Manufactured (WAAM) carbon steel wall using numerical simulation
|
110 |
B. Paermentier, D. Debruyne, R. Talemi - Numerical modelling of dynamic ductile fracture propagation in different lab-scale experiments using GTN damage model
|
117 |
A. Laureys, M. Pinson, L. Claeys, T. De Seranno, T. Depover, K. Verbeken - Initiation of hydrogen induced cracks at secondary phase particles
|
125 |
R. Hadj Boulenouar, B. Boutabout, N. Djebbar - Three-dimensional numerical analysis of a joint bonded reinforced with silica nanoparticles (SiO2)
|
140 |
S. Budhe, M.D. Banea, S. de Barros - Prediction of the burst pressure for defective pipelines using different semi-empirical models
|
149 |
A. Ayadi, K. Meftah, S. Sedira - Elastoplastic analysis of plane structures using improved membrane finite element with rotational DOFs
|
160 |
J. Kasivitamnuay, P. Singhatanadgid - Object-Oriented Software for Fitness-For-Service Assessment of Cracked Cylinder Based on API RP 579
|
175 |
A. Drai, B. Aour, N. Belayachi, A. Talha, N. Benseddiq - Finite element modeling of the behavior of polymethyl-methacrylate (PMMA) during high pressure torsion process
|
193 |
H. EL-Emam, A. El-Sisi, R. Reda, M. Seleem, M. Bneni - Effect of concrete cover thickness and main reinforcement ratio on flexural behavior of RC beams strengthened by NSM-GFRP bars
|
209 |
H. Latifi, N. Amini - Effect of aggregate type on moisture susceptibility of modified cold recycled mix asphalt: evaluation by mechanical tests and Surface Free Energy method
|
223 |
N. Hebbar, I. Hebbar, D. Ouinas, M. Bourada - Numerical modeling of bending, buckling, and vibration of functionally graded beams by using a higher-order shear deformation theory
|
242 |
C. Caselle, S. Bonetto, D. Costanzo - Crack coalescence and strain accommodation in gypsum rock
|
259 |
W. N. Bouzitouna, W. Oudad, M. Belhamiani, D. E. Belhadri, L. Zouambi - Elastoplastic analysis of cracked Aluminum plates with a hybrid repair technique using the bonded composite patch and drilling hole in opening mode I
|
268 |
J. Akbari, M. Ahmadifarid, A. Kazemi Amiri - Multiple crack detection using wavelet transforms and energy signal techniques
|
281 |
M. Fouzia, L. Abdelkader, M. Abdelkader, S. Abderahmane - Optimization design based approach for the determination and minimization of the displacement under tensile load in hybrid composite joint
|
293 |
A.V. Tumanov, V.N. Shlyannikov, A.P. Zakharov - Crack growth rate prediction based on damage accumulation functions for creep-fatigue interaction
|
311 |