Issue 50

K. Singh et alii, Frattura ed Integrità Strutturale, 50 (2019) 319-330; DOI: 10.3221/IGF-ESIS.50.27 329 [18] Estrin, Y., Mecking, H. (1984). A unified phenomenological description of work hardening and creep based on one- parameter model, Acta Metallurgica, vol 32, pp. 57-70. DOI: 10.1016/0001-6160(84)90202-5. [19] Gururaj, K., Robertson, C., Fivel, M. (2015). Post-irradiation plastic deformation in bcc fe grains investigated by means of 3d dislocation simulations, Journal of Nuclear Materials, 459, pp. 194-204. DOI: 10.1016/j.jnucmat.2015.01.031. [20] Thomas, H., Bruno, M., Jean-Michel, P., Maxime, S., Jerome, S., Michel, C. (2015). Introducing the open-source mfront code generator: Application to mechanical behaviours and material knowledge management within the PLEIADES fuel element modelling platform, Computers & Mathematics with Applications, 70, pp. 994–1023. DOI: 10.1016/j.camwa.2015.06.027 [21] Spitzig, W. (1973). The effect of orientation, temperature and strain rate on deformation of Fe-0.16 wt.% Ti single crystals, Material Science and Engineering, 12, pp. 191–202. DOI: 10.1016/0025-5416(73)90010-4. [22] Quesnel, D., Sato, A., Meshii, M. (1975). Solution softening and hardening in the iron-carbon system, Material Science and Engineering, 18, pp. 199–208. DOI: 10.1016/0025-5416(75)90170-6. [23] Kuramoto, E., Aono, Y., Kitajima, K. (1979). Thermally activated slip deformation of high purity iron single crystals between 4.2 k and 300 k, Scripta Metallurgica, 13, pp. 1039–1042. DOI: 10.1016 /0036-9748(79)90199-6 . [24] Vincent, L., Libert, M., Marini, B., Rey, C. (2010). Towards a modelling of RPV steel brittle fracture using crystal plasticity computations on polycrystalline aggregates, Journal of Nuclear Materials, 406, pp. 91-96. DOI: 10.1016/j.jnucmat.2010.07.022. [25] Vincent, L., Gelebart, L., Dakhlaoui, R., Marini, B. (2011). Stress localization in BCC polycrystals and its implications on the probability of brittle fracture, Materials Science and Engineering A, 528, pp. 5861-5870. DOI: 10.1016/j.msea.2011.04.003. [26] Libert, M., Rey, C., Vincent, L., Marini, B. (2011). Temperature dependant polycrystal model application to bainitic steel behavior under tri-axial loading in the ductile–brittle transition, International Journal of Solids and Structures, 48, pp. 2196-2208. DOI: 10.1016/j.ijsolstr.2011.03.026. [27] N’Guyen, C.N., Barbe, F., Osipov, N., Cailletaud, G., Marini, B., Petry, C. (2012). Micromechanical local approach to brittle failure in bainite high resolution polycrystals: A short presentation, Computational Materials Science, 64, pp. 62- 65. DOI: 10.1016/j.commatsci.2012.03.034. N OMENCLATURE T Absolute temperature m  Mobile dislocation density (m-2) obs  Total obstacles (forest dislocation and irradiation loops) self  Dislocation density on same slip system F  Forest dislocation density irr  Irradiation defect density  Strain rate on slip system AF  Interaction coefficient of system A with obstacle system F  Average obstacle strength based on a quadratic average rule self  Obstacle strength between same slip system b Magnitude of Burger’s vector h Distance between Peierls valleys B Phonon/viscous drag coefficient  Average obstacle spacing 0  Peirels shear stress at 0 K eff  Effective resolved shear stress on the slip plane RSS  Resolved shear stress on the slip plane c  Critical resolved shear stress self  Same slip system’s dislocations induced stress LT  Line tension resistance  Shear modulus 0 H  Pair activation enthalpy at 0 K B k Boltzmann constant irr N Irradiation defects (interstitial loop) number density irr d Irradiation defects (interstitial loop) diameter X  Distance swept by kink pair before its annihilation y Dynamic recovery parameter