Issue 49

M. Tashkinov et alii, Frattura ed Integrità Strutturale, 49 (2019) 396-411; DOI: 10.3221/IGF-ESIS.49.39 410 DOI: 10.1016/j.compstruct.2013.06.008. [2] van der Meer, F.P. (2012). Mesolevel Modeling of Failure in Composite Laminates: Constitutive, Kinematic and Algorithmic Aspects, Arch. Comput. Methods Eng., 19(3), pp. 381–425, DOI: 10.1007/s11831-012-9076-y. [3] Alderliesten, R.C. (2013). Critical review on the assessment of fatigue and fracture in composite materials and structures, Eng. Fail. Anal., 35, pp. 370–9, DOI: 10.1016/j.engfailanal.2013.03.022. [4] Paris, F., Jackson, K.E. (2001). A Study of Failure Criteria of Fibrous Composite Materials, Office, (March), pp. 76. DOI: NASA/CR- 2001-210661. [5] Chen, J.F., Morozov, E. V., Shankar, K. (2014). Simulating progressive failure of composite laminates including in-ply and delamination damage effects, Compos. Part A Appl. Sci. Manuf., 61(June), pp. 185–200. DOI: 10.1016/j.compositesa.2014.02.013. [6] Liu, P.F., Zheng, J.Y. (2010). Recent developments on damage modeling and finite element analysis for composite laminates: A review, Mater. Des., 31(8), pp. 3825–3834, DOI: 10.1016/j.matdes.2010.03.031. [7] Orifici, A.C., Herszberg, I., Thomson, R.S. (2008). Review of methodologies for composite material modelling incorporating failure, Compos. Struct., 86(1–3), pp. 194–210, DOI: 10.1016/j.compstruct.2008.03.007. [8] Christensen, R.M. (2007). A Comprehensive Theory of Yielding and Failure for Isotropic Materials, J. Eng. Mater. Technol., 129(2), pp. 173, DOI: 10.1115/1.2712847. [9] Hill, R. (1963). Elastic properties of reinforced solids: Some theoretical principles, J. Mech. Phys. Solids, 11(5), pp. 357–372, DOI: 10.1016/0022-5096(63)90036-X. [10] Tsai, S.W., wu, E.M. (1971). A General Theory of Strength for Anisotropic Materials, J. Compos. Mater. DOI: 10.1177/002199837100500106. [11] Hashin, Z., Rotem, A. (1973). A Fatigue Failure Criterion for Fiber Reinforced Materials, J. Compos. Mater. DOI: 10.1177/002199837300700404. [12] Hashin, Z. (1980). Failure criteria for unidirectional fibre composites, ASME J. Appl. Mech. [13] Puck, A., Schürmann, H. (2004).Failure analysis of FRP laminates by means of physically based phenomenological models. Failure Criteria in Fibre-Reinforced-Polymer Composites. [14] Chang, F.K., Chang, K.Y. (1987). A Progressive Damage Model for Laminated Composites Containing Stress Concentrations, J. Compos. Mater., DOI: 10.1177/002199838702100904. [15] Gorbatikh, L., Ivanov, D., Lomov, S., Verpoest, I. (2007). On modelling of damage evolution in textile composites on meso-level via property degradation approach, Compos. Part A Appl. Sci. Manuf., 38(12), pp. 2433–2442. DOI: 10.1016/j.compositesa.2007.08.017. [16] Krueger, R. (2004). Virtual crack closure technique: History, approach, and applications, Appl. Mech. Rev., 57(2), pp. 109, DOI: 10.1115/1.1595677. [17] Rybicki, E.F., Kanninen, M.F. (1977). A finite element calculation of stress intensity factors by a modified crack closure integral, Eng. Fract. Mech., DOI: 10.1016/0013-7944(77)90013-3. [18] Raju, I.S. (1987). Calculation of strain-energy release rates with higher order and singular finite elements, Eng. Fract. Mech., DOI: 10.1016/0013-7944(87)90220-7. [19] Buchholz, F.G., Grebner, H., Dreyer, K.H., Krome, H. (2013).2D- and 3D-Applications of the Improved and Generalized Modified Crack Closure Integral Method. Computational Mechanics ’88. [20] Liu, P.F., Hou, S.J., Chu, J.K., Hu, X.Y., Zhou, C.L., Liu, Y.L., Zheng, J.Y., Zhao, A., Yan, L. (2011). Finite element analysis of postbuckling and delamination of composite laminates using virtual crack closure technique, Compos. Struct., DOI: 10.1016/j.compstruct.2010.12.006. [21] Kenane, M., Benzeggagh, M.L. (1997). Mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites under fatigue loading, Compos. Sci. Technol., 57(5), pp. 597–605, DOI: 10.1016/S0266-3538(97)00021-3. [22] Tay, T.E., Liu, G., Tan, V.B.C., Sun, X.S., Pham, D.C. (2008). Progressive failure analysis of composites, J. Compos. Mater., DOI: 10.1177 /0021998308093912. [23] Lapczyk, I., Hurtado, J.A. (2007). Progressive damage modeling in fiber-reinforced materials, Compos. Part A Appl. Sci. Manuf., DOI: 10.1016/j.compositesa.2007.01.017. [24] Liu, P.F., Zheng, J.Y. (2010). Recent developments on damage modeling and finite element analysis for composite laminates: A review, Mater. Des., DOI: 10.1016/j.matdes.2010.03.031. [25] Ernst, G., Vogler, M., Hühne, C., Rolfes, R. (2010). Multiscale progressive failure analysis of textile composites, Compos. Sci. Technol., DOI: 10.1016/j.compscitech.2009.09.006. [26] Exercise, T.W.F. (2004). Failure Criteria in Fibre Reinforced Polymer Composites: TheWorld-Wide Failure Exercise. [27] Bank, L.C. (2012). Progressive Failure and Ductility of FRP Composites for Construction: Review, J. Compos. Constr., DOI: 10.1061/(asce)cc.1943-5614.0000355.