Issue 49

A. Kostina et alii, Frattura ed Integrità Strutturale, 49 (2019) 302-313; DOI: 10.3221/IGF-ESIS.49.30 313 [14] Wang Y., Lu B. A. (2001). Coupled reservoir-geomechanics model and applications to wellbore stability and sand prediction, SPE International Thermal Operations and Heavy Oil Symposium, 12 - 14 March, Porlamar, Venezuela, SPE-69718-MS. DOI: 10.2118/69718-MS. [15] Minkoff, S. E., Stoneb, C. M., Bryantc, S., Peszynskac, M., Wheeler, M. F. (2003). Coupled fluid flow and geomechanical deformation modeling, J. Pet. Sci. Eng., 38(1-2), pp. 37-56. DOI: 10.1016/S0920-4105(03)00021-4. [16] Du J., Wong R. C. K. (2009). Coupled geomechanics reservoir simulation of UTF phase a project using a full permeability tensor, J. Can. Pet. Tech., 48 (7), pp. 66-73. DOI: 10.2118/09-07-66. [17] Lin B., Chen S., Jin Y. (2017). Evaluation of reservoir deformation induced by water injection in SAGD wells considering formation anisotropy, heterogeneity and thermal effect, J. Pet. Sci. Eng., 157, pp. 767-779. DOI: 10.1016/j.petrol.2017.07.067. [18] Li, P., Chalaturnyk, R.J., Tan, T.B. (2006). Coupled reservoir geomechanical simulations for the SAGD process, J. Can. Pet. Tech., 45(1), pp. 33-40. DOI: 10.2118/2003-08.3 [19] Azad, A., Chalaturnyk, R. J. (2009). Geomechanical coupling simulation in SAGD process; a linear geometry model, 3rd CANUS Rock Mechanics Symposium. Toronto, paper 4153. [20] Rahmati, E., Nouri, A., Fattahpour, V. (2017). Numerical assessment of the maximum operating pressure for SAGD projects considering the effects of anisotropy and natural fractures, J. Pet. Sci. Eng., 157, pp. 196-206. DOI: 10.1016/j.petrol.2017.07.005. [21] McLellan, P., Read, R., Gillen, K. (2000). Assessing caprock integrity for steam-assisted gravity-drainage projects in heavy-oil reservoirs, SPE/Petroleum Society of CIM International Conference on Horizontal Well Technology, 6-8 November, Calgary, Canada, SPE 65521. [22] Khan, S., Han, H., Ansari, S., Vishteh, M., Khosravi, N. (2011). Caprock integrity analysis in thermal operations: an integrated geomechanics approach, World Heavy Oil Congress, 14-17 March, Edmonton, Canada, paper 11-609. [23] Walters, D. A., Wang, J., Settari, A. (2012). A geomechanical methodology for determining maximum operating pressure in SAGD reservoirs, SPE Heavy Oil Conference Canada, 12-14 June, Calgary, Canada, SPE-157855-MS. DOI: 10.2118/157855-MS. [24] Uwiera-Gartner, M.M.E., Carlson, M. R. (2011). Evaluation of the clearwater formation caprock for a proposed, low pressure, steam-assisted gravity-drainage pilot project in northeast Alberta, SPE Annual Technical Conference and Exhibition, 30 October – 2 November, Denver, USA, SPE 147302-PP. DOI: 10.2118/147302-MS. [25] Lee, H., Kharangte, C. R., Mascarenhas, N. (2015). Experimental and computational investigation of vertical downflow condensation, Int. J. Heat Mass Transfer, 85, pp. 865-879. DOI:10.1016/j.ijheatmasstransfer.2015.02.037. [26] Debernardi, D., Barla, G. (2009). New viscoplastic model for design analysis of tunnels in squeezing conditions, Rock Mech. Rock Engng, 42(2). – pp. 259-288. DOI: 10.1007/s00603-009-0174-6. [27] Grujicic, M., He, T., Pandurangan, B., Bell, W.C., Cheeseman, B.A., Roy, W. N., Skaggs R. R. (2009). Development, parameterization, and validation of a visco-plastic material model for sand with different levels of water saturation, Proc. IMechE Part L: J. Materials: Design and Applications, 223, pp. 63-81. DOI:10.1243/14644207JMDA237. [28] Lake, L.W. (1989). Enhanced Oil Recovery, Englewood Cliffs, Prentice-Hall Inc. [29] Kostina, A. A., Zhelnin, M. S., Plekhov, O. A. (2018). Study of oil filtration during steam-assisted gravity drainage process, Bulletin of Perm Scientific Center, 3, pp. 6-16. DOI: 10.7242/1998-2097/2018.3.1. [30] Konoplev, Yu. P. (2004). Scientific and methodological foundations of design and analysis of thermomine oil field development, PhD thesis, VNIIneft, Moscow. (In Russian). [31] Du, J., Wong, C.K. (2007). Coupled geomechanics-reservoir simulation of UTF phase A project using a full permeability tensor, Canadian International Petroleum Conference, 12-14 June, Calgary, Canada, paper 2007-152. DOI: 10.2118/09-07-66.