Issue 48

C.M.S. Vincente et alii, Frattura ed Integrità Strutturale, 48 (2019) 748-756; DOI: 10.3221/IGF-ESIS.48.68 756 [30] Anitha, R., Arunachalam, S., Radhakrishnan, P. (2001). Critical parameters influencing the quality of prototypes in fused deposition modelling, J. Mater. Process. Technol., 118(1–3), pp. 385–388, DOI: 10.1016/S0924-0136(01)00980-3. [31] Wenzel, R.N. (1936). Resistance of solid surfaces to wetting by water, Ind. Eng. Chem., 28(8), pp. 988–994, DOI: 10.1021/ie50320a024. [32] Jordá-Vilaplana, A., Fombuena, V., García-García, D., Samper, M.D., Sánchez-Nácher, L. (2014). Surface modification of polylactic acid (PLA) by air atmospheric plasma treatment, Eur. Polym. J., 58, pp. 23–33, DOI: 10.1016/J.EURPOLYMJ.2014.06.002. [33] Espert, A., Vilaplana, F., Karlsson, S. (2004). Comparison of water absorption in natural cellulosic fibres from wood and one-year crops in polypropylene composites and its influence on their mechanical properties, Compos. Part A Appl. Sci. Manuf., 35(11), pp. 1267–1276, DOI: 10.1016/J.COMPOSITESA.2004.04.004. [34] Dhakal, H.N., Zhang, Z.Y., Richardson, M.O.W. (2007). Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites, Compos. Sci. Technol., 67(7–8), pp. 1674–1683, DOI: 10.1016/j.compscitech.2006.06.019. [35] Galantucci, L.M., Lavecchia, F., Percoco, G. (2010). Quantitative analysis of a chemical treatment to reduce roughness of parts fabricated using fused deposition modeling, CIRP Ann., 59(1), pp. 247–50, DOI: 10.1016/J.CIRP.2010.03.074. [36] Neff, C., Trapuzzano, M., Crane, N. (2016).Impact of Vapor Polishing on Surface Roughness and Mechanical Properties for 3D Printed ABS. 2016 Solid Freeform Fabrication Symposium, Austin, pp. 2295–2304.