Issue 46

H. Zhu et alii, Frattura ed Integrità Strutturale, 46 (2018) 361-370; DOI: 10.3221/IGF-ESIS.46.33 366 Figure 3 : The load-deflection curve of L2. Figure 4 : The load-deflection curve of L3. No. of test specimen L1 L2 L3 The test value of the ultimate load (KN) 334.68 289.54 279.61 The simulated value of the ultimate load (KN) 339.02 308.52 286.37 Error (%) 1.30 6.56 2.42 Table 3 : The comparison of the test values and simulated values of the beams. Tab. 3 suggests that the test values were close to the simulated values, and the errors were all lower than 10%. The strains of the rebars and CFRP plates were analyzed using universal methods, and there were also small errors between the tested values and simulated values. The results suggested that the finite element model had a high accuracy.