Issue 45

L.M. Viespoli et alii, Frattura ed Integrità Strutturale, 45 (2018) 121-134; DOI: 10.3221/IGF-ESIS.45.10 134 R EFERENCES [1] Eurocode 3: Design of steel structures - Part 1-9: Fatigue, EUROPEAN COMMITTEE FOR STANDARDIZATION Ref, No, EN 1993-1-92005: E [2] Hobbacher, A. (2007). Recommendations for fatigue design of welded joints and components IIW document IIW- 1823-07 [3] Peterson, R. E. (1953). Stress Concentration Design Factors. John Wiley & Sons ISBN 978-0471683766. [4] Lazzarin, P. and Tovo, R. (1998). A notch intensity factor approach to the stress analysis of welds. Fatigue & Fracture of Engineering Materials & Structures 21, pp. 1089-1103. [5] Lazzarin, P. and Zambardi, R. (2001). A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches. International Journal of Fracture 112, pp. 275–298. [6] Williams, M.L. (1952). Stress singularities resulting from various boundary conditions in angular corners of plates in tension. J Appl Mech 19, pp. 526–528. [7] Henshell, R.D. and Shaw, K.G. (1975). Crack tip finite elements are unnecessary. Int J Numer Methods Eng 9, pp. 495–507. [8] Berto, F. and Lazzarin, P. (2009). The volume-based Strain Energy Density approach applied to static and fatigue strength assessments of notched and welded structures, Procedia Engineering 01, pp. 155–158 [9] Lazzarin, P., Berto, F., Gomez, F. J. and Zappalorto, M. (2008). Some advantages derived from the use of the strain energy densityover a control volume in fatigue strength assessments of welded joints. International Journal of Fatigue 30, pp. 1345–1357. [10] Lazzarin, P., Berto, F. and Zappalorto, M. (2010). Rapid calculations of notch stress intensity factors based on averaged strain energy density from coarse meshes: Theoretical bases and applications. International Journal of Fatigue 32, pp. 1559–1567. [11] Gillemot, L. F. (1976). Criterion of crack initiation and spreading. Eng Fract Mech 8, pp. 239-253. [12] Sih, G. C. (1974). Strain-energy-density factor applied to mixed mode crack problems. Int J Fract 10, pp. 305-321. [13] Sih, G. C. (1991) Mechanics of Fracture Initiation and Propagation: Surface and volume energy density applied as failure criterion, Kluwer Academic Publisher, Dordrecht. [14] Sih, G. C. (1974). Surface layer energy and strain energy density for a blunted crack or notch, In: Prospect of Fracture Mechanics, edited by GC Sih, HC van Elst and D Broek, Noordhoff International Publishing, Leyden, 85-102. [15] Glinka, G. and Molski, K. (1981). A method of elastic-plastic stress and strain calculation at a notch root. Mat Science Eng 50, pp. 93-100. [16] Lazzarin, P. and Zambardi, R. (2002). The equivalent strain energy density approach re-formulated and applied to sharp V-shaped notches under localised and generalised plasticity, Fatigue Fract Engng Mater Struct 25, pp. 917-928. [17] Lazzarin, P., Lassen, T. and Livieri, P. (2003). A Notch Stress Intensity approach applied to fatigue life predictions of welded joints with different local toe geometry, Fatigue Fract Engng Mater Struct 26, pp. 39-48. [18] Livieri, P. and Lazzarin, P. (2005). Fatigue strength of steel and aluminium welded joints based on generalised stress intensity factors and local strain energy values. Int J Fract 133, pp. 247-278. [19] Lazzarin, P., Berto, F. and Radaj, D. (2006). Uniform fatigue strength of butt welded joints in terms of the local strain energy density, Proc. Int. Conference Fatigue 2006, Atlanta, USA. [20] Lazzarin, P., Livieri, P., Berto, F. and Zappalorto, M. (2008). Local strain energy density and fatigue strength of welded joints under uniaxial and multiaxial loading. Engng Fract Mech 75, pp. 1875-1889. [21] Zienkiewicz, O.C., Taylor, R.L. and Zhu, J.Z. (2005). The Finite Element Method: Its Basis and Fundamentals, Elsevier Butterworth-Heinemann, 6 th edition. [22] Radaj, D. (2013). Advanced Methods of Fatigue Assessment, Springer-Verlag Berlin Heidelberg. [23] Anderson, T.L. (1995). Fracture Mechanics - Fundamentals and Applications CRC Press. [24] Poutiainen, I., Tanskanen, P. and Marquis, G. (2004). Finite element methods for structural hot spot stress determination - a comparison of procedures, International Journal of Fatigue 26, pp. 1147–1157. [25] Jae-Myung Lee et al., (2010). Comparison of hot spot stress evaluation methods for welded structures, Inter J Nav Archit Oc Engng 2, pp. 200-210.