Issue34

S. Kikuchi et alii, Frattura ed Integrità Strutturale, 34 (2015) 261 - 270; DOI: 10.3221/IGF-ESIS.34.28 270 [11] Sawangrat, C., Yamaguchi, O., Vajpai, S.K., Ameyama, K., Application of harmonic structure design to biomedical Co–Cr–Mo alloy for improved mechanical properties, Mater. Trans., 55 (2014) 99–105. DOI: 10.2320/matertrans.MA201303 [12] Sekiguchi, T., Ono, K., Fujiwara, H., Ameyama, K., New microstructure design for commercially pure titanium with outstanding mechanical properties by mechanical milling and hot roll sintering, Mater. Trans., 51 (2010) 39–45. DOI: 10.2320/matertrans.MB200913 [13] Vajpai, S.K., Ota, M., Watanabe, T., Maeda, R., Sekiguchi, T., Kusaka, T., Ameyama, K., The development of high performance Ti-6Al-4V alloy by via a unique microstructure design with bimodal grain size distribution, Metall. Mater. Trans. A, 46 (2015) 903–914. DOI: 10.1007/s11661-014-2649-7 [14] Kikuchi, S., Takemura, K., Hayami, Y, Ueno, A., Ameyama, K., Evaluation of the fatigue properties of Ti-6Al-4V alloy with harmonic structure in 4-points bending, J. Soc. Mater. Sci., Jpn., 64 (2015) in press. [15] Nalla, R.K., Boyce, B.L., Campbell, J.P., Peters, J.O., Ritchie, R.O., Influence of microstructure on high-cycle fatigue of Ti-6Al-4V: bimodal vs. lamellar structures, Metall. Mater. Trans. A, 33 (2002) 899–918. DOI: 10.1007/s11661- 002-1023-3. [16] Boyce, B.L., Ritchie, R.O., Effect of load ratio and maximum stress intensity on the fatigue threshold in Ti-6Al-4V, Eng. Fract. Mech., 68 (2001) 129–147. DOI: 10.1016/S0013-7944(00)00099-0. [17] Nakai, Y., Tanaka, K., The effects of stress ratio and grain size on near-threshold fatigue crack propagation in low- carbon steel, Eng. Fract. Mech., 15 (1981) 291–302. 10.1016/0013-7944(81)90062-X. [18] Kikukawa, M., Jono, M., Tanaka, K., Takatani, Measurement of fatigue crack propagation and crack closure at low stress intensity level by unloading elastic compliance method, M., J. Soc. Mater. Sci., Jpn., 25 (1976) 899–903. [19] Nakamura, Y., Yoshida, S., Kikuchi, S., Ueno, A., Evaluation of the effects of low temperature nitriding on 4-points bending fatigue properties of Ti-6Al-4V alloy, Proc. Asian-Pacific Conf. Fract. Strength 2014 and the Int. Conf. Struct. Integrity and Failure, (2014) 93–98. [20] Ogawa, T., Tokaji, K., Ohya, K., The effect of microstructure and fracture surface roughness on fatigue crack propagation in a Ti-6Al-4V alloy, Fatigue Fract. Eng. Mater. Struct., 16 (1993) 973–982. DOI: 10.1111/j.1460- 2695.1993.tb00132.x

RkJQdWJsaXNoZXIy MjM0NDE=