Issue34

L.P. Pook, Frattura ed Integrità Strutturale, 34 (2015) 150-159; DOI: 10.3221/IGF-ESIS.34.16 159 [27] Pook, L. P., The significance of Mode I branch cracks for mixed mode fatigue crack growth threshold behaviour. In Brown M W and Miller K J (Ed). Biaxial and multiaxial fatigue. EGF 3. London: Mechanical Engineering Publications Ltd. (1989) 247-263. [28] Pook, L. P., Crack paths . WIT Press, Southampton, UK, (2002). [29] Pook, L. P., The effect of crack angle on fracture toughness. Eng. fract. Mech., 3 (1971) 205-218. [30] Lam, Y. C., Mixed mode fatigue crack growth with a sudden change in loading direction. Theoretical and Appl. Fract. Mech., 19 (1993) 69-74. [31] ton, UK, F., Sih, G. C., On the crack extension in plates under plane loading and transverse shear. J. bas. Engng. , 85D (1963) 519-527. [32] Schöllmann, M., Kullmer, G., Fulland, M., Richard, H. A., A new criterion for 3D crack growth under mixed-mode (I+II+III) loading. In de Freitas M (Ed). Proc. Sixth Int. Conf. On Biaxial/Multiaxial Fatigue & Fracture. Instituto Superior Técnico, Lisbon, Portugal, II (2001) 589-596. [33] Pook, L. P., The fatigue crack direction and threshold behaviour of mild steel under mixed Mode I and III loading. Int. J. Fatigue , 7 (1985) 21-30. [34] Lawn, B. R., Wilshaw, T. R., Fracture of solids. Cambridge University Press, Cambridge, UK (1975). [35] Cotterell, B., On brittle fracture paths. Int. J. Fract. Mech., 1 (1965) 96-103. [36] Pook, L. P., An alternative crack path stability parameter. In Brown M W, de los Rios E R and Miller K J (Eds.). Fracture from defects. ECF 12. Cradley Heath, West Midlands: EMAS Publishing, I (1998) 187-192. [37] Pook, L. P., Geometric constraints on fatigue crack paths in tubular welded joints. The Archive of Mechanical Engineering, 45 (1998) 143-156. [38] Kreyszig, E., Differential geometry. University of Toronto Press, Toronto, Canada, (1963). [39] Mahmoud, M. A., Surface fatigue crack growth under combined tension and bending. Eng. Fract. Mech., 36 (1990) 389-395. [40] Barenblatt, G. I., Botvina, L. R., Self-oscillatory modes of fatigue fracture and the formation of self-similar structures at the fracture surface. Proc. Roy. Soc. Lond. A., 442 (1993) 489-494. [41] Pook, L. P., Metal Fatigue: what it is, why it matters. Springer, Dordrecht, The Netherlands, (2007). [42] Portela, A., Dual boundary element analysis of crack paths. Southampton: Computational Mechanics Publications (1993). [43] Dhondt, G., Cyclic crack propagation at corners and holes. Fatigue Fract. Engng. Mater. Struct., 28 (2005) 25-30. [44] Fulland, M., Sander, M., Kullmer, G., Richard, H. A., Analysis of fatigue crack propagation in the frame of a hydraulic press. Eng. Fract. Mech., 75 (2008) 892-900. [45] Dhondt, G., Application of the finite element method to mixed-mode cyclic crack propagation calculations in specimens. Eng. Fract. Mech., 58 (2014) 2-11. [46] Brown, W. F., Srawley, J. E., Plane strain crack toughness testing of high strength metallic materials. ASTM STP 410. American Society for Testing and Materials, Philadelphia, USA, (1967). [47] ASTM E399-12e3. Standard test method for linear-elastic plane-strain fracture toughness K Ic of metallic materials. American Society for Testing and Materials, West Conshohocken, USA, (2012). [48] Tentative method of test for plane strain fracture toughness testing of metallic materials. E399-70 T. American Society for Testing and Materials, Philadelphia, USA, (1970). [49] Schijve, J., Some comments on the paper: Review of fracture toughness and standards (EFM, 2012, vol. 85, 1-46). Eng. Fract. Mech., 96 (2012) 760-761. [50] Kotousov, A., Lazzarin, P., Berto, F., Pook, L. P. Coupled fracture modes at sharp notches and cracks. In. Carpinteri A, Pook L P, Iacoviello F and Susmel L. (Ed). Proc. Fourth International Conference on Crack Paths. University of Parma, Parma, Italy, (2012) 135-146.