Issue 30

M. Da Fonte et alii, Frattura ed Integrità Strutturale, 30 (2014) 360-368; DOI: 10.3221/IGF-ESIS.30.43 368 [2] Newman, J. C., Philips, E. P., Swain, M. H., Everett, R. A., Fatigue mechanics: an assessment of a unified approach to life prediction. ASTP STP 1122 (1992), pp 5-27. [3] Akhurst, K. N., Lindley, T. C., Nix, K. J., The effect of mode III loading on fatigue crack growth in a rotating shaft. Fatigue Engn Struct, 6 (1983) 345-348. [4] Fonte, M., de Freitas, M., Marine main engine crankshaft failure analysis: a case study, Engineering Failure Analysis 16 (2009) 1940–1947. [5] Hourlier, F, McLean, D, Pineau, A., Fatigue crack growth behaviour of Ti-5Al-2.5Sn alloy under complex stress (modeI+steady mode III). Metals Tech, 1978:154-158. [6] Yates, J.R., Miller, K.J., Mixed Mode (I+III) fatigue thresholds in forging steel. Fatigue Engng Mat Struct, 12 (1989) 259-270. [7] Tschegg, E.K., Stanzl, S., Mayer, H., Czegley, M., Crack face interactions near threshold fatigue crack growth, Fatigue Fract Engng Mater Struct, 16 (1983) 71-83. [8] Tschegg, E.K., Mode III and mode I fatigue crack propagation behaviour under torsional loading, J Mat Science, 18 (1983) 1604-1614. [9] Fonte, M., Freitas, M., Semi-elliptical crack growth under rotating or reversed bending combined with steady torsion. Fat Fract Engng Mater Struct, 20 (1997) 895-906. [10] Raju, I.S., Newman, J.C., Stress intensity factors for circumferential surface cracks in pipes and rods under tension and bending loads, Fracture Mechanics, ASTM STP 905 (1986) 789-805 [11] Shiratori, M., Miyoshi, T., Sakay, Y., Zhang, G.R., Factors Analysis and application of influence coefficients for round bar with a semi-elliptical surface crack. Murakami Y. editor. Handbook of Stress Intensity Factors, II; Pergamon Press, Oxford, 1987:659-65. [12] Fonte, M., Freitas, M., Stress Intensity Factors for semi-elliptical surface cracks in round bars under bending and torsion. Int J of Fatigue, 21 (1999) 457-463. [13] de Freitas, M., Reis, L., da Fonte, M., Li, B., Effect of steady torsion on fatigue crack initiation a nd propagation under rotating bending: Multiaxial fatigue and mixed-mode cracking. Engineering Fracture Mechanics, 78 (2011), 826-835.