Issue 30

A. Spagnoli et alii, Frattura ed Integrità Strutturale, 30 (2014) 145-152; DOI: 10.3221/IGF-ESIS.30.19 145 Focussed on: Fracture and Structural Integrity related Issues Thermal degradation in Carrara marbles as the cause of deformation of cladding slabs A. Spagnoli Dipartimento di Ingegneria Civile, dell’Ambiente del Territorio e Architettura, Università di Parma spagnoli@unipr.it M. Migliazza, M. Zucali Dipartimento di Scienze della Terra “Ardito Desio”, Università di Milano A.M. Ferrero Dipartimento di Scienze della Terra, Università di Torino A BSTRACT . Marble slabs, typically used as façade panels to externally cover buildings, might permanently deform after a certain time of environmental exposure. This phenomenon, called bowing, is generally accompanied by a reduction of strength which increases with increasing degree of bowing. In the present paper, a theoretical model to calculate the progressive bowing of marble slabs submitted to temperature cycles is briefly recalled and applied to a specific Carrara marble sample. The marble is investigated by a microscopic analysis of thin sections cut along three orthogonal directions. The digital photographs are treated by an image analysis code which is capable of extracting grain size and shape distributions. In this way the anisotropic microstructure of the marble is quantified and taken into account in the numerical analyses. The influence of size distribution of grains as well as of their distribution of optic axis orientation on the slab bowing is discussed with the attempt of offering a quantitative tool for a better understanding of in situ bowing measurements. K EYWORDS . Bowing; Crack propagation; Fracture mechanics; Marble; Thermal cycles. I NTRODUCTION arble slabs are often used as façade panels to externally cover buildings. They are subjected to different actions that deteriorate the material, including: temperature (daily and seasonal excursions, through-thickness gradient), mechanical loads (wind, self-weight), chemical attacks (acid rain), humidity changes. Temperature may induce stresses due to thermal expansion (restraint effects of the anchorage system, nonlinear temperature fields, nonuniform thermal expansion). One visible phenomenon linked to deterioration of marble is bowing, which is characterised by permanent out-of-plane deflections. Bowing is generally accompanied by an overall reduction of strength which increases with increasing degree of bowing, while at the material microstructural level the bowing is characterized by a decohesion of calcite grains. In order to understand the phenomenon of bowing in marble slabs, several experimental and theoretical studies [1-8] have been carried out, starting with the pioneering work of Rayleigh [9]. The results of these studies show that the strength of M

RkJQdWJsaXNoZXIy MjM0NDE=