Issue 30

G. Pitarresi et alii, Frattura ed Integrità Strutturale, 30 (2014) 127-137; DOI: 10.3221/IGF-ESIS.30.17 127 Focussed on: Fracture and Structural Integrity related Issues Photoelastic stress analysis assisted evaluation of fracture toughness in hydrothermally aged epoxies G. Pitarresi, A. Toscano, M. Scafidi, M. Di Filippo, S. Alessi, G. Spadaro University of Palermo, Dipartimento di Ingegneria Chimica, Gestionale, Informatica, Meccanica (DICGIM) – Viale delle Scienze, 90128 Palermo (Italy) giuseppe.pitarresi@unipa.it , andrea.toscano@unipa.it, michele.scafidi@unipa.it, maria.difilippo@unipa.it, sabina.alessi@unipa.it , giuseppe.spadaro@unipa.it A BSTRACT . The present work has investigated the fracture toughness of a model DGEBA epoxy system subject to Hidro-Thermal aging. A Photoelastic Stress Analysis technique has been implemented, showing the evolution of stresses arising throughout the water uptake process due to the non-uniform swelling of the material. Gravimetric and Dynamic Mechanical Thermal Analyses have further complemented the characterization, showing the onset of plasticization effects with aging. The correlation of all previous characterizations has allowed to conclude that an increase of K IC fracture toughness is obtained at the fully saturated condition. In particular Photoelasticity has also revealed the onset of relevant swelling induced stresses during the first stages of water absorption, leading to an increase of fracture toughness due to compressive stresses settling near the crack tip. A stress free condition is instead reestablished at the later stages of absorption, suggesting that the increased toughness of the saturated material is an effect of the modifications induced by aging on the polymer structure. K EYWORDS . Fracture Toughness; Hydrothermal Aging; Thermosetting Resin; Swelling Stresses; Photoelastic Stress Analysis. I NTRODUCTION lossy polymer structures, such as thermoset matrices used in Fiber Reinforced Plastic (FRP) composites, are in general prone to solvents absorption. A more or less severe solvent exposure depends on the working conditions, and in general both civil or transport applications may present very aggressive environments, which can activate various aging phenomena in the material. Water uptake by exposure to wet environments is in particular a most studied aging condition for thermoset resins [1-3]. In fact a vast literature is now available which has investigated the kinetics of water diffusion, and the physical and chemical transformations occurring in the material [4]. The nature of such transformations is rather variegate. The absorbed water is for instance differentiated into free and bonded water [1,4-7], with the bonded water chemically reacting with sites of the polymer chain, e.g. by means of hydrolysis. Such chemical interactions can modify the network structure, increasing the molecular chain mobility (plasticization), and also modifying the free volume, which in turns can interfere with the amount of absorbed free water. Another consequence of such diffusion-reaction changing scenario is the swelling deformation of the network [7,8], which can have important mechanical consequences, especially when the polymer is somewhat constrained to other more inert materials [7]. G

RkJQdWJsaXNoZXIy MjM0NDE=