numero26

S. Bulatovic et alii, Frattura ed Integrità Strutturale, 26 (2013) 41-48; DOI: 10.3221/IGF-ESIS.26.05 47 A NALYSIS OF DAMAGE he damaged parts of steam line were analyzed, to determine the cause of the problem, which is a process that requires a systematic approach. Test results of NDT methods contribute to the knowledge of damage formation and allow us to determine the cause of steam line failure. Based on the research of failure and causes of failure of certain components of steam line using method FMEA and reliability parameters obtained from the analysis of the data collected in real operating conditions, a system of continuous diagnosis could be established. Stress analysis [12,13,14], damage and fractures [15,16] of welded joints of steam line elements provide important directives for the development of design methods and construction elements of the steam line to improve the properties of existing materials and their processing technologies. Also, by analyzing fractures, the development of new technical solutions and methods of testing is enabled [17] in the prototype stage. It is necessary to take into account the risk analysis and structural integrity [18,19], as a new approach to the assessment of structural integrity. T HE DATABASE INFORMATION oad data, the characteristics of the base material and its welded joints, technology development, technical and physical characteristics reported fractures data and preventive measures provided for damage and destruction are obtained from the databases. Database of implemented testing [2] and research [20] on the appropriate structures allows us to analyze the behavior of supporting elements of steam line in order to determine changes in mechanical properties of materials. Load data, as well as the characteristics of the base material and its welded joints, technology development, technical and physical characteristics of the recorded fracture and destruction are inserted into the appropriate database. Reliable assessment of the integrity of the observed elements, could be made only after creation of adequate database and the basis for the development of computer programs [21]. Supporting software packages would allow more efficient use of the database, the analysis of some influencing factors, and the search of alternative solutions in all phases of design and development of construction. C ONCLUSION nly by examining the construction of steam line operating conditions it is possible to assess their condition completely. During examination period the necessary data are obtained to determine the quality and structural integrity assessment and evaluation of the impact of the elements on the capacity and is given the necessary data to establish the joint work of devices and structure of steam line. The results presented in this paper and conducted research projects allow us to analyze the behavior of supporting elements of steam line in order to determine changes in mechanical properties of materials. A CKNOWLEDGEMENTS he paper was done within the project TR 35011, "The integrity of the pressure equipment with the simultaneous action of fatigue load and temperature," founded by the Ministry of Education, Science and Technological Development of the Republic of Serbia. R EFERENCES [1] KLBA-M9-013: The test program of the technological metal machine part, TEK A, Jun, 2001. [2] Reports on NDT testing methods of steam line at the Kolubara A, Institute IMS, 2000-2012. [3] Regulation on the technical requirements for the design, development and conformity assessment of pressure equipment (Sluzbeni glasnik RS no. 87/2011). [4] Regulation on pressure equipment inspections during the operation (Sluzbeni glasnik RS no. 87/2011). [5] Pressure Equipment Directive (PED 97/23/EC). T L O T