Issue 24

T.V. Tretiakova et alii, Frattura ed Integrità Strutturale, 24 (2013) 1-6; DOI: 10.3221/IGF-ESIS.24.01 1 Special Issue: Russian Fracture Mechanics School Relay-race deformation mechanism during uniaxial tension of cylindrical samples of carbon steel: using digital image correlation technique T.V. Tretiakova, V.E. Vildeman Center of Experimental Mechanics, Perm National Research Polytechnic University, 614990, Komsomolsky av., 29, Perm, Russia A BSTRACT . The work deals with experimental study of macro localization of plastic yielding occurrences of structural carbon steel, research of singularity of deformation wave processes by complex use of contemporary test equipment and high effective digital image correlation method. Evolution of nonuniform axial strain fields on surface of cylindrical samples during uniaxial tension was registered, time dependences were drawn, and a ‘relay-race’ mechanism of material deformation was found out at the stage of yield plateau forming. Strain concentration ratio was estimated for several material deformation stages. K EYWORDS . Digital image correlation; Wave effects; Strain localization; Carbon steel. I NTRODUCTION great number of scientific literature deals with experimental study issues of plastic strain in solid bodies, specifically, authors repeatedly point out that plastic strain develops nonuniformly both in space (strain localization) and in time (time evolution of localization) [1, 2]. Striking examples of plastic strain localization on macroscopic level are Chernov-Lüders Lines, initiation and evolution of necking effect on postcritical deformation stage [3, 4], and also waves of localized plastic strain. The aim of this research was experimental investigation of regularities of plastic yielding macro localization for structural steel, study of singularities of wave deformation processes by complex use of contemporary testing equipment and non- contact strain measuring facilities. M ATERIAL AND TEST PROCEDURE tructural carbon steel 20 (GOST 1050-88) was chosen as the research subject. Mechanical tests on uniaxial tension of solid cylindrical samples (test portion length of 16 mm, sample’s diameter of 9.5 mm) were conducted on Instron 8850 universal biaxial servo-hydraulic testing system with constant kinematic loading speed of 2%/min. Non- contact registration and displacement and strain fields review were carried out by three-dimensional Vic-3D digital optical system (Fig. 1). Video-system’s software is based on digital image correlation technique (DIC). DIC is a highly effective non-contact, computer-vision-based method for measuring displacement and strain fields on specimen’s surface by correlating digital images captured during loading or exploitation process [5]. The digital optical system can be used for problem solving of deformable solid mechanics: experimental investigation of nonuniform strain fields and analysis of failure conditions in bodies with concentrators of different geometry [6, 7], research of inelastic material deformation processes in complex strain-stress conditions, study of displacement and strain fields evolution during crack initiation, damage accumulation and material failure [8–10], etc. The video-system contains A S

RkJQdWJsaXNoZXIy MjM0NDE=