#### General Papers

2D and 3D self-affine crack propagation on aluminium alloys | |

M. Hinojosa, E. I. Morales, X. Guerrero, U. Ortiz, J. Aldaco |

2D simulation of tensile behavior of fiber-reinforced brittle matrix composites with weak interface | |

S. Ochiai, S. Kimura, M. Tanaka, M. Hojo |

A boundary element based meso-analysis on the evolution of material damage | |

H. Okada, Y. Fukui, N. Kumazawa |

A complex variable formulation for the interactions between rigid inclusions and cracks | |

K. T. Chau, W. B. Wang |

A J estimation scheme and its application to low cycle fatigue crack growth | |

G. G. Chell, R. C. McClung, Y.-D. Lee |

A limit equilibrium of quasibrittle materials with thin inclusions | |

M. M. Stadnyk, I. Y. Horbachevskyy |

A mesoscopic theory of damage and fracture in heterogeneous materials | |

A. Carpinteri, B. Chiaia, P. Cornetti |

A method for acceleration of decreasing *K FCGR tests | |

S. Tarafder, S. Sivaprasad, M. Tarafder, K. K. Ray |

A method for variable amplitude lifetime calculation in the high cycle regime | |

H. Zenner, S. Poting |

A multiscale fracture mechanics model for predicting damage evolution in laminated composites subjected to impact loading | |

D. H. Allen |

A new approach for identifying the bending loads on beam using the discrete integral method | |

H. Kisu, G. Rong, Y. Kondo |

A new experimental technique for determining the fracture energy of wood under mode II loading conditions | |

K. Fruhmann, E.K. Tschegg, S.E. Stanzl-Tschegg |

A new material model and its application to fracture analysis in fiber pull-out tests | |

R. V. Goldstein, E. Lyamina, S. Alexandrov |

A new nonlocal fracture criterion | |

S. V. Suknyov |

A numerical study of constraint and rate effects on dynamic crack growth | |

X. Zhang, Y.-W. Mai |

A possible explanation of size effect in fatigue strength of metals | |

A. Carpinteri, A. Landini, A. Spagnoli |

A potential node release technique for estimating ductile crack growth in metallic materials | |

J. X. Zhang, H. Murakawa |

A simple method for topology optimization using orthotropic material properties | |

Z. Wu, Y. Sogabe, Y. Arimitsu |

A stiffness release (finite element) model for high speed crack propagation analysis | |

N. N. Kishore, M. Siva Reddy, G. V. Deskmukh |

A strain based approach to assessing creep crack initiation and crack growth | |

D. J. Smith, A. J. Fookes, D. W. Dean |

A study of crack depth effect and scattering of fracture toughness in three point bend COD specimens | |

M. Toyosada, K. Gotoh, S. Nakayama |

A study of fatigue cracking behaviour dependent on the distance between two hole defects | |

S.-H. Song, J.-S. Bae, A. Kim |

A study of fracture from the viewpoint of dilatation | |

Y. Arimitsu, Y. Sogabe, Z. Wu |

A study of hydrogen embrittlement in automotive fastener steels | |

B. Lonyuk, R. op, D. N. Hanlon, S. van der Zwaag, J. Zuidema, A. Bakker |

A study of mode II fracture toughness test standardisation of metals | |

T. Tamilselvan, K. W. Lo, Y. B. Gong, M. O. Lai |

A theremodynamically consistent damage formulation based on a nonlocal damage activation threshold | |

G. Borino, E. Benvenuti, A. Tralli |

A toughness study of the weld heat affected zone of a modified 9Cr-1Mo steel | |

A. Moitra, K. Laha, R. P. Sreenivasan, S. L. Mannan |

A variable-amplitude fatigue life prediction taking into account crack retardation | |

Z. Perovic |

A variational principle for finite transformation gradient plasticity to model ductile fracture | |

E. Lorentz, V. Cano |

Ab initio study of generalized stacking fault energies in magnesium | |

T. Uesugi, M. Kohyama, M. Kohzu, K. Higashi |

About the connection between the characteristics of the LCF and FCG | |

G. Nagy, J. Lukacs |

Account of plasticity in macro-microcrack interaction | |

V. Tamuzs, V. Petrova, S. Tarasovs |

Accuracy of measurement in instrumented impact test | |

T. Kobayashi, S. Morita |

Advanced cohesive zone models for fracture simulation | |

T. Siegmund |

Aircraft structural integrity: the impact of corrosion | |

G. Clark, P. K. Sharp, T. Mills |

Alternative methods for deriving and fitting J-R curves: How they affect structural integrity assessment | |

J. R. Tarpani, A. A. Colafemea, W. W Bose Filho, D. Spinelli |

An analytical technique for studying interacting branched cracks in a plate | |

S. C. TerMaath |

An elasto-plastic damage model for cementitious materials | |

D. Addessi, S. Marfia, E. Sacco |

An element-free Galerkin method for dynamic fracture in functional graded material | |

H. Peixiang, L. Ziran, W. Changchun |

An example of the influence of residual stress on fracture | |

I. Finnie |

An experimental investigation of dynamic inelastcity and fracture of nanostructured coatings | |

H. Espinosa, Z. Wu |

An experimental model of void growth and coalescence during ductile fracture | |

C. R. Colapietro, P. A. Kirkham, D. A. Koss |

An extended void growth model for ductile failure - assessment for non radial loadings and application to fracture toughness prediction | |

T. Pardoen, J. W. Hutchinson, L. Cousin-Cornet |

An impact damage model for cementitious composites | |

P. Verleysen, J. Degriek |

An integrated EFGM-FEM for linear-elastic fracture mechanics | |

B. N. Rao, S. Rahman |

An integrated multiscale computation model to link atomic and continuum approaches | |

Y. Liu |

An interface element for the numerical analysis of fibre reinforced concrete | |

M. Cuomo |

An overview of failure mechanisms in high temperature components in power plants | |

R. Viswnathan |

Analyses of size effects in the charpy v-notch test | |

A. A. Benzerga, R. Batisse, A. Needleman, V. Tvergaa |

Analysis and testing of rupture of steam generator tubing with flaws | |

S. Majumdar, K. S. Kasza, J. Y. Park, J. Abou Hanna |

Analysis of a penny-shaped crack in a transversely isotropic piezoelectric medium | |

M.-H. Zhao, P. Tong, T.-Y. Zhang |

Analysis of ballistic properties of multilayered shields using approximate models | |

T. Elperin, G. Ben-Dor, A. Dubinsky |

Analysis of environmental effects using the unified approach for fatigue crack growth | |

K. Sadananda, R. L. Holtz, A. K. Vasudevan |

Analysis of fracture mechanics and fatigue behaviour for EC(T) specimen | |

J. Z. Liu, X. R. Wu, B. R. Hu, L. F. Wang |

Analysis of micromechanical tensile damage process for brittle ceramic materials using FEM | |

T. Niezgoda, J. Malachowski, Z. Smalko |

Analysis of subsonic interfacial fracture using strain gages in an isotropic-orthotropic biomaterial | |

V. Ricci, K. H. Lee, A. Shukla, V. Chalivendra |

Analysis of the physico-chemical mechanisms responsible for hydrogen attack | |

S. M. Schlogl, E. Van der Giessen |

Analysis of the process zone ahead of a crack tip | |

J. Lemaitre |

Analysis of three dimentional interface cracking in electronic packages | |

A. O. Ayhan, H. F. Nied |

Anistropic microcrack-based frictional damage model for brittle materials | |

L. Gambarotta |

Anti-plane shear crack growth in piezoceramics: change of electric field and displacement direction | |

B. Liu, S. Y. Cheng, Z. F. Song, W. F. Ren |

Application of risk-based maintenance with life and financial assessment on fossil-fired power plants | |

A. Fuji, H. Eguchi, J. Takahashi, C. Fukuoka, T. Tanoue, Y. Okatsuka |

Application of ultrasonic peening to improving fatigue properties of welded joints | |

H. Lixing, W. Dongpo, S. Yufeng, C. Jungmei |

Assessment of fatigue strength of low alloy steels for ships' crankshaft | |

S. Omata, H. Matsushita |

Assessment of fracturing tunnel linings with smeared crack model | |

Z. S. Wu, J. Yin, T. Asakura, Y. Kojima |

Asymptotic fields at a crack-tip in flat paltes | |

J. Li |

Asymptotic fields near a crack tip located at interfaces of several anisotropic materials | |

L. Jia, X.-B. Zhang, N. Recho |

Asymtotic Mode III and Mode E Crack Tip Solutions in Ferroelectric Materials | |

C. Landis |

Atomic scale investigation of metal/ceramic interface fracture by super high-resolution electron microscopy | |

H. Ichinose, H. Saito |

Atomic-force microscopy on corrosion pits and crack initiation in fatigue metals | |

Y. Nakai, Y. Shimizu, S. Fujiwara, T. Ogawa |

Atomistic approaches to fracture | |

M. Marder |

Atomistic simulations of the mechanical response and modes of failure in metals at finite strain | |

J. Zhao, S. Chantasiriwan, D. Maroudas, F. Milstein |

Automatic control of secondary flexure in uniaxial tensile test of concrete | |

H. Akita, S. Donggy, H. Koide, M. Tomon |

Beam theory and weight function methods for mode I delamination with large scale bridging | |

R. Massabo, B. N. Cox |

Betonite pellets mechanical properties variation caused by oily waste inclusion | |

E. A. de Carvalho, G. P. Sousa, J. N. F. Holanda |

Bifurcation assessment of mixed mode crack in elastic-plastic materials | |

X. B. Zhang, J. Li, N. Recho |

Brittle fracture of hard soil - soft rock materials | |

K. W. Lo, T. Tamilselvan, L. Yu |

Calculation model for corrosion calendar life of metal parts | |

Z. Fuze |

Can stretch zone measurements provide a good estimate of fracture toughness | |

S. Sivaprasad, S. Tarafder, V. R. Ranganath, S. K. Das, K. K Ray |

Challenges in characterizing the crack-tip environment as a basis for prediction of crack growth kinetics | |

A. Turnbull |

Characterisation of crack toughness behaviour of unfilled and filled elastomers | |

W. Grellmann, K. Reincke, R. Lach, G. Heinrich |

Characterisation of fatigue crack formation in mechanically surface treated austenitic stainless steel | |

I. Altenberger, B. Scholtes, U. Noster, R. O. Ritchie |

Characterization, analysis and prediction of delamination in composites using fracture mechanics | |

T. K. O'Brien |

Co-planar crack interaction in cleaved MICA | |

J.C. Hill, S.J. Bennison, P.A. Klein, A. Jagota, S. Saigal |

Cohesive and adhesive fracture under nanoscale contacts: Environmental and microstructural effects | |

N. I. Tymiak, A. Daugela, M. Li, T. J. Wyrobek, W. W. Gerberich |

Cohesive model for thin film/substrate interfacial cleavage fracture | |

Y. Shouwen, L. Ran |

Cohesive-zone modeling of debond growth at adhesively bonded interfaces in aggressive environments | |

S. Roy, K. M. Liechti |

Coincindence doppler broadening positron annihilation spectroscopy in defects in iron and silicon | |

M. Fujinami, T. Sawada, T. Akahane |

Comparison of experiment and theory for crack tip fields in ductile single crystals | |

W. C. Crone, W. J. Drugan |

Comparison of measured fracture toughness and size-independent fracture toughness for concrete | |

J. H. Hanson, A. R. Ingraffea |

Complex component failure with large ductile crack growth - high quality prediction by damage mechanical simulation and experimental verification | |

W. Baer, D. Klingbeil |

Composite laminates least prone to cracking under combined mechanical and thermal loads | |

B. L. Karihaloo, J. Wang |

Compressive fracture of orthotropic laminates containing open holes due to fibre micro-instability | |

C. Soutis |

Computational modelling of cracks in viscoplastic media | |

G. N. Wells, L. J. Sluys, R. de Borst |

Computational modelling of residual stress effects on crack initiation and growth in ductile materials | |

N. P. O'Dowd, Y. Lei, P. S. May, G. A. Webster |

Constituent effects on the stress-strain behavior of woven melt-infiltrated SiC composites | |

G. N. Morscher, J. I. Eldridge |

Constraint correction of fracture toughness CTOD for fracture performance evaluation of structural components | |

F. Minami, K. Arimochi |

Constraint loss in ductile solids under dynamic loading | |

R. Narasimhan |

Construction of strain-life diagram based on variable amplitude fatigue data | |

M. Endo, H. Miyata |

Continum and atomistric studies of intersonic and supersonic crack propogation | |

H. Gao, Y. Huang, F. F. Abraham |

Continuum models with ruptured/restored microstructure | |

A. I. Leonov |

Continuum-atomistic modeling for crack initiation and propagation in polycrystals | |

E. Iesulauro, K. Dodhia, T. Cretegny, C.-S. Chen, C. Myers, A. R. Ingraffea |

Corrosion cracking of stainless steel under stress: the problem and its solution | |

A. A. Myatie-v, G. V. Khil'chenko |

Corrosion fatigue behavior of ship structural steels | |

R. Ebara |

Corrosion fatigue fracture behavior of high-strength Cu trolley wire for high-speed railroad services | |

K. Minoshima, K. Miyazawa, K. Komai |

Corrosion fatigue mechanisms in metallic materials | |

T. Magnin, D. Delafosse |

Corrosion-fatigue performance of die cast magnesium alloys | |

W. G. Ferguson, W. Liu, J. MacCulloch |

Corrosion-pit-growth behaviour during corrosion fatigue process in aluminium | |

S. Ishihara |

Coupling of asymptotic solutions with finite elements at interface configurations in piezoelectric composites | |

M. Scherzer, M. Kuna |

Coupling of damage mechanics and probabilistic approach for life-time prediction of composite material structures | |

Y. Bruner, D. Jeulin, J. Renard, A. Thionnet |

Crack deflection in layered, graded composites | |

J. Chapa-Cabrera, I. E. Reimanis |

Crack front waves in dynamic fracture | |

J. Fineberg, E. Sharon |

Crack growth behaviour of Ni-Base High Temperature Alloys at 500 to 1000°C | |

F. Schubert, H. J. Penkalla, P. J. Ennis, L. Singheiser |

Crack growth characteristics under high temperature fatigue-creep multiplication division | |

M. Yoda, O. Yokota, M. Kanou, T. Yokobori |

Crack growth in a Ti6A14V alloy under multiaxial fatigue | |

F. S. Silva, A. C. M. Pinho |

Crack growth in solid propellants | |

E. E. Gdoutos, G. Papakaliatakis |

Crack growth resistance of metal foams | |

I. Schmidt, N. A. Fleck |

Crack initiation and growth in graded materials due to sliding contact | |

F. Erdogan |

Crack initiation behavior of piezoelectric ceramic: electro-mechanical interaction | |

B. Liu, Z. F. Song, G. C. Sih |

Crack path development in materials with nonlinear process zone and composites | |

A. A. Rubinstein |

Crack Plane Influence on Time-Dependent Fracture of Bimaterials | |

A. Gordon, D. McDowell |

Crack propagation in cementitious materials by acoustic emission based on fracture mechanics | |

M. Ohtsu |

Crack propagation in concrete elements strengthened by GFRP | |

B. Bonfiglioli, G. Pascale, E. Viola |

Crack propagation in mixed mode fracture of concrete | |

P. C. Olsen |

Crack stability in uniaxial tensile tests | |

C. Shi, J. G. M. van Mier |

Crack Tip Deformation and Toughness in Polypropylenes | |

S. Seidler, T. Koch, I. Kotter, W. Grellmann |

Crack velocity dependent toughness in rate dependent materials | |

C. M. Landis, T. Pardoen, J. W. Hutchinson |

Creep crack growth analysis based on microscopic fracture mechanism | |

M. Tabuchi, K. Kubo, K. Yagi, A. T. Yokobori |

Creep crack growth parameters in directionally solidified superalloys | |

A. Saxena, B. Gardner, J. Qu |

Creep damage analysis of short cracks using a narrow notch specimen made from a Ni-base superaloy at 700°C | |

T. H. Hyde, A. A. Becker, W. Sun |

Creep effects on tensile failure of concrete at an early age | |

K. Iriya, H. Umehara |

Creep fracture of ceramic-matrix composites | |

B. Wilshire, H. Burt |

Critical energy release rate of a bimaterial asymmetric double cantilever beam (ADCB) with an adhesive layer | |

N. B Kuipers, A. Bakker, G. E. Schoolenberg, M. Janssen |

Critical length of short fatigue cracks | |

A. Plumtree, N. Untermann |

Cross-sectional nanoindentation: a new technique to measure thin film interfacial adhesion | |

B. Sun, T. Scherban, D. Pantuso, J. M. Sanchez, R. Elizalde, J. M. Martinez-Esnaola |

Crystallographic analysis of surfaces after brittle fracture in ferritic steels | |

V. Randle, P. Davies, O. Williams |

Curved crack path prediction by the MVCCI-method and experimental verification for a specimen under lateral force bending | |

H. Theilig, F. –G. Buchholz |

Cyclic compression of jacketed reinforced concrete columns | |

D. Krajcinovic |

Cyclic crack tip deformation - the influence of environment | |

E. Gach, R. Pippan |

Cyclic plastic deformation of pipeline steel | |

C. H. L. J. ten Horn, A. Bakker, R. W. J. Koers, J. T. Martin, J. Zuidema |

Cyclic thermal loading of ceramic matrix composites: constitutive models and design strategies | |

A. C. F. Cocks, M. E. Booker, F. A. Leckie |

Damage and fracture in creep of magnesium alloy-based composites | |

V. Sklenicka, M. Pahutova, M. Svoboda, K. Kucharova, I. Podstranska |

Damage assessment for concrete-structures using AE/UT technique | |

K. Iwaki, T. Shiotani, M. Ohtsu |

Damage concept on fatigue crack growth characteristics under mixed-mode loading condition | |

T. Isogai, A. T. Yokobori |

Damage evolution and damage tolerance in ceramic matrix composites: empirical measurements and analytical modeling | |

M. Jenkins |

Damage evolution and fracture of viscoelastic composites under time-varying loads | |

J. Varna, A. Krasnikovs, R. Talreja |

Damage formation in transformations in HTSC during compaction and sintering | |

I. A. Parinov |

Damage fracture and fatigue for the piezoelectric and ferroelectric medium | |

Y. Shouwen, W. Yang |

Damage in high temperature components and the life assessment technologies | |

K. Fujiyama, T. Fujiwara |

Damage initiation and evolution in a heterogeneous material | |

C. Liu, M. G. Stout, B. W. Asay |

Damage of nickel base superalloy subjected to low cycle fatigue with hold periods | |

J. Zrník, J. Semenak, V. Vrchovinsky |

Damage progression behaviour under high temperature creep and fatigue conditions | |

A. T. Yokobori Jr., Y. Kaji, T. Kuriyama |

Deformation Characteristics on Creasing of Paperboard Under Shallow Indentation | |

S. Nagasawa, Y. Fukuzawa, D. Yamaguchi, S. Nagae, I. Katayama, A. Yoshizawa |

Deformation of [001] NiTi single crystals | |

H. Sehitoglu, X. Zhang, J. Jun, I. Karaman, K. Gall, Y. Chumlyakov |

Description of multiple cracking in uv-degraded stressed polyethylene using percolation approach | |

I. Skrypnyk, N. Bilyk, J. Spoormaker |

Design of experiments for reliability assessment of active mechanical structures | |

R. Kouta, H. Fall, W. Charon |

Deterioration properties of damaged concrete due to freezing and thawing | |

H. Mihashi, M. Saichi |

Determination of different fracture mode stress intensity factor with virtual crack extension method | |

B. Zafosnik, M. Ubin, Z. Ren, J. Flasker |

Determination of fracture properties of high-chromium white cast iron | |

M. Janssen, M.B. van Leeuwen, M.F. Mendes de Leon |

Determination of fracture toughness of rock under in-situ conditions using semi-circular specimen | |

M. D. Kuruppu, M. Seto |

Determination of microstructural parameters for modeling of fatigue behavior in ceramics | |

K. White |

Determining load history effects on HCF crack growth thresholds | |

M. A. Moshier, T. Nicholas, B. M. Hillbery |

Detrimental effect of hydrogen on the fracture strength of single-walled carbon nanotubes | |

S. Q. Shi, L. G. Zhou |

Development and validation of a robust fracture mechanics methodology for damage tolerance of rotorcraft | |

S.N. Atluri, G. Nikishkov, D. Le, C. Harrsion, M. F. Kanninen |

Development of cohesive models from the study of atomic scale fracture processes | |

P. A. Klein, J. A. Zimmerman, E. P. Chen |

Digital speckle correlation test for fracture of thin film | |

H. Wang, Y. Kang |

Direct comparison of elastic-perfectly-plastic interfacial free-edge and crack-tip singular fields | |

L. Marsavina, A. D. Nurse |

Direct evaluation of accurate stress intensity factors with a partition of unity method | |

B. L. Karihaloo, Q. Z Xiao |

Discontinous crack growth of polymide resin, effect of molecular weight | |

M. Notomi, K. Kishimoto, T. Shibuya, H. Inaba, A. Morita |

Discrete dislocation analyses of crack growth | |

V. S. Deshpande, A. Needleman, E. Van der Giessen |

Double cohesive zone model and prediction of micro-scratch testing along solid surface | |

M. Zhao, Y. Wei, J. W. Hutchinson |

Ductile damage accumulation under cyclic deformations and multiaxial state of stress conditions | |

N. Bonora, A. Pirondi |

Ductile damage and crack growth analysis in 3D structures | |

D. Gross, H. Baaser |

Ductile fracture analysis of structural steel by application of micromechanical modelling | |

M. Rakin, Z. Cvijovic, A. Sedmak, M. Zrillic, Z. Putic |

Ductile fracture in high strength steel weldments | |

V. Olden, Z. Zhang, C. Thaulow |

Ductile rupture of aluminium sheets | |

J. Brocks, J. Besson, O. Chabanet, D. Steglich |

Ductile tearing of interacting surface breaking defects | |

B. Bezensek, J. Hancock |

Dynamic compressive behavior of closed-cell aluminum foams | |

J. Lankford, A. Nicholls, K. Dannemann |

Dynamic delaminatin in through-thickness reinforced DCB specimens | |

N. Sridhar, B. N. Cox, I. J. Beyerlein, R. Masa |

Dynamic embrittlement: time dependent intergranular decohesion | |

C. McMahon |

Dynamic fracture and fragmentation brittle spheres subject to double impact test | |

K. T. Chau, S. Z. Wu, X. X. Wei |

Dynamic fracture behaviour of composites | |

S. Ravi, N. G. R. Iyengar, N. N. Kishore, A. Shu |

Dynamic fracture surface energy values and frustrated micro-branches during RCP in an impact modified polymer | |

C. Fond, R. Schirrer |

Dynamic fracture testing using charpy instrumented pendulum | |

Z. Radakovic, D. Radakovic, G. B. Lenkey, V. Grabulov, A. Sedmak |

Dynamic JR curves from instrumented impact test of unprecracked charpy V-notch specimens of austenitic stainless steel | |

P. R. Sreenivasan, S. K. Ray, S. L. Mannan |

Dynamic stress intensity factor for unsteady rapid crack propagation | |

K. Arakawa, T. Mada, K. Takahashi |

Dynamic tensile strength of PMMA/AL plate butt adhesive joints | |

H. Wada, S. Kubo, K. Murase, T. C. Kennedy |

Dynamics of inter-facial crack front propagation | |

K. J. Maloy, J. Schmittbuhl, A. Delaplace, J. J. Ramasco |

Effect of aqueous environment and viscid droplet on deformation of spider thread | |

M. Kitagwa |

Effect of bridging ligaments upon crack kinking in graded interfaces | |

M. Hoffman, L. Kidson, C. Deneke |

Effect of crack orientation and welding process on J-integral values | |

Q. Li, L. Li, S.-S. Yang, S.-L. Yang, S.-T. Yin |

Effect of cracking on serviceability of fibrous concrete | |

T. Ayano, M. A. afa, K. Sakata |

Effect of electrical field reversal on crack growth behaviour in poled piezoelectric ceramics | |

G. C. Sih |

Effect of fiber coatings on detection of transverse cracks in CFRP composites using FBG sensors | |

Y. Okabe, N. Tanaka, T. Mitzutani, S. Yashiro, N. Takeda |

Effect of film plasticizing under multistage ultimate strain | |

A. A. Myatie-v, G. V. Khil'chenko |

Effect of foreign object damage on the high cycle fatigue strength of Ti-6Al-4V | |

S. R. Thompson, J. J. Ruschau, T. Nicholas |

Effect of halogen freeing on fatigue properties of electronics printed plastic board | |

M. Nakamura, H. Suzuki, T. Matsumoto, T. Ohtsuki |

Effect of humidity on fatigue crack propagation of aluminum alloys | |

Y. Koboyashi, Y. Ito, K. Kido, K. Ishikawa |

Effect of impact loading on tensile strength of concretes | |

M. Daimaruya, H. Kobayashi, H. Shizawa, R. A. Siriegar, Y. Ishihata |

Effect of microstructural change on the R-curve behavior of an alumina matrix composite reinforced with SiC-whiskers | |

T. Akatsu, Y. Tanabe, E. Yasuda |

Effect of microstructural degradation on crack tip stress fields in two-phase single crystals | |

E. P. Busso, N. P. O'Dowd, S. Dumoulin, D. Allen |

Effect of nanotexturing on interfacial adhesion in MEMS | |

M. P. de Boer |

Effect of notch sharpness and cold expansion on the fatigue crack arrest | |

R. Ghfiri, A. Amrouche, A. Imad |

Effect of predeformation on fatigue life - experimental characterisation and description by means of a new parameter | |

H.-J. Christ, K. Schoeler |

Effect of reinforcing particle morphology on the tensile response of 6061/SiC/25p discontinuously-reinforced aluminum | |

J. E. Spowart, D. B. Miracle |

Effect of residual stress on fatigue strength of steel modified by WPC process | |

D. Yonekura, H. Akebono, J. Komotori, M. Shimizu, H. Shimizu |

Effect of surface crack geometry on the fatigue life of a high strength low alloy steel | |

A. Giassone, F. A. Darwish, M. V. Pereira, .A C. Vidal, A. R. Martins |

Effect of surface roughness on corrosion response of stainless steel polished by ELID grinding method | |

J. Nagata, J. Komotori, K. Katahira, H. Ohmori |

Effect of test rate on tensile strength of various continuous fiber-reinforced ceramic composites at elevated temperatures | |

S. R. Choi, J. P. Gyekenyesi |

Effect of the notch shape and the presence of a circular void in front of a circular notch on the failure mode transition speed in an impact loaded plate | |

R. C. Batra, N. A. Jaber, M. E. Malsbury |

Effect of the size of surface defects on the fatigue strength of shot peened springs | |

B. Vargas-Arista, J. L. Gonzalez, J. M. Hallen, A. J. McEvily |

Effect of thermal exposure of the fracture toughness of several high temperature adhesive systems | |

D. Rhymer, S. Johnson |

Effective mode-II stress intesity factor for partially opened natural cracks under mixed-mode loading | |

T. Fett |

Effects of constraint and grain size on ductility and toughness in Ti Alloys | |

S. Kanamori, E. Abe, T. Tagawa, T. Miyata |

Effects of dynamic strain ageing in J-R fracture resistance of SA516-Gr.70 piping steels | |

J. H. Yoon, B. S. Lee, J. H. Hong |

Effects of heterogeneity on the strength of 3D composites | |

S. Mahesh, S. Leigh Phoenix, I. J. Beyerlien |

Effects of noble gas environments on fatigue crack growth in titanium alloys | |

M. Shimojo, R. Kusama, M. Otsubo, Y. Higo |

Effects of plastic strain on cleavage fracture predictions in steel | |

S. R. Bordet, A. D. Karstensen, C. S. Wiesner, D. M. Knowles |

Effects of static stress on anodic polarization behavior of Ti-4.5Al-3V-2Mo-2Fe alloy | |

N. Hyakutake, M. Takagaki, J. Komotori, A. Ogawa, K. Minakawa |

Effects of stress ratio on striation formation under cyclic loading conditions in polymethyl methacrylate (PMMA) | |

C. Ishiyama, K. Kobayashi, T. Asai, Y. Higo |

Effects of T-stress and void nucleation on cohesive zone model predictions for ductile fracture | |

V. Tvergaard |

Elastic instability of alloys by hydrogenation: Molecular dynamics study of hydrogen-induced amorphization | |

M. Katagiri, H. Onodera |

Electromechanical modeling of unidirectional CFRP composites | |

Y. Okabe, N. Tanaka, T. Mitzutani, S. Yashiro, N. Takeda |

Electromechanical modeling of unidirectional CFRP composites | |

T. Okabe, J. B. Park, N. Takeda |

Elevated temperature fracture and crack growth in TiAl base intermetallics | |

B. Dogan |

Embrittlement of high strength B-Ti alloys | |

R. P. Gangloff |

Energy balance method for predicting cracking in cross-ply laminates during bend deformation | |

N. McCartney |

Environmental effects on crack growth in continuous fiber SiC-composites | |

C. H. Henager |

Environmental effects on fracture and sub-critical crack growth evaluation for life time prediction | |

T. Shoji |

Environmentally assisted fracture behavior of silicon microelements | |

K. Komai, K. Minoshima, T. Terada |

Equilibrium length of a Zener-Barenblatt nanocrack wedged open by a disclination dipole | |

M. S. Wu |

Error estimation of shape changes during fatigue crack growth | |

T. D. Righiniotis |

Estimation of creep crack growth from circular notched specimen | |

T. Adachi |

Estimation of dynamic stress intensity factors for beams and cylindrical specimens | |

S. Y. Kovchyk, V. M. Boyko, I. V. Khodan, I. D. Skrypnyk |

Estimation of high cycle fatigue limit of hard shot peened austenitic stainless steel | |

K. Masaki, Y. Ochi, T. Matsumura |

Evaluation of a brittle fracture accidents that occurred at the Hyogo-Ken Nanbu earthquake | |

M. Toyosada, K. Gotoh, Y. Watanabe, S. Nakayama |

Evaluation of bond properties of crack injection repair for concrete structures | |

K. Rokugo, M. Kunieda, T. Kamada |

Evaluation of fracture toughness of ceramics/metal functionally graded material by three-point bending test | |

K. Tohgo, T. Suzuki, H. Araki, H. Ishii |

Evaluation of high-cycle fatigue life of aluminum cast alloy from meso-level consideration | |

H. Noguchi, T. Miyazaki |

Evaluation of stress intensity factors of spot welded joints using meshless method | |

K. Shimizu, N. Tomioka, A. Okabe |

Evaluation of thermal and elastic properties for solid surfaces using transient reflecting grating method | |

K. Katayama, Q. Shen, A. Harata, T. Sawada |

Evolution of fracture of steels at a temperature of 4.2 k under the action of electric current pulses | |

V. A. Strizhalo, L. S. Novogrudsky |

Experimental and analytical studies on peeling behaviour and spalling resistance effect of externally bonded continuous fiber sheets | |

Z. Wu, T. Asakura, H. Yoshizawa, H. Yuan, A. Kobayashi, T. Takahashi |

Experimental and finite element analysis of fracture criterion of extra deep drawn steel sheets | |

D. M. Kulkarni, R. Prakash |

Experimental failure modes and finite element analysis of lightweight ceramic ablator materials under iosipescu shear testing | |

S. Nagasawa, K. E. Parmenter, K. Shuman, F. Milstein |

Experimental investigation of the inertial effects occurring in impact tests on plastics with varying mass distribution | |

A. Pavan, G. Barbaglia |

Experimental investigation on the influence of surface engineering on thermal fatigue of a hot work tool steel | |

A. Persson, J. Bergstrom, C. Burman, S. Hogmark |

Experimental research on fracture and fatigue of SCT specimen simulating high-strain region of pressure vessel nozzels | |

X. Chen, T. Yang, W. Jin, J. Jiang, C. Cheng |

Experimental study on effect which mechanical properties of beam materials on deformation capacity of beam/column connections | |

T. Nakagomi, K. Matoba, Y. Ichikawa |

Experimental study on the effect of plastic constraint on ductile tearing | |

Q.-F. Li, L. Li, S.-l. Yang, P. Long, X.-T. Han, H.-G. Cao |

Experimental validation of T* Integral | |

A. S. Kobayashi, S. N. Atluri |

Experimental validation of T* Integral | |

A. S. Kobayashi, S. N. Atluri |

Experimental-numerical analysis of mechanisms of damage initiation in tool steels | |

L. Mishnaevsky Jr, N. Lippmann, S. Schmauder |

Explicit modeling of damage initiation and evolution in open hole composites | |

E. Iarve |

Failure analysis of a particulate composite cutoff wheel with fiber reinforcing | |

T. J. Mackin, H. Inglis |

Failure analysis of the girth gear of an industrial ball mill | |

M. Mirzaei, A. Razmjoo, A. Pourkamali |

Fatigue and fracture behaviour of a laser heat treated martensitic high-nitrogen steel | |

M. Heitkemper, C. Bohne, A. Pyzalla, A. Fischer |

Fatigue and fracture of Cu-SiO2 alloys at elevated temperatures | |

H. Miura, T. Sakai |

Fatigue and fracture properties of CO-FE at 150°C | |

E. Guglielmino, V. Filardi, S. Harris, T. Hyde |

Fatigue and hydrogen cracking in cannons with mechanical and thermal residual stresses | |

J. H. Underwood, A. P. Parker, E. Troiano, G. N. Vigilante, M. D. Witherell |

Fatigue behaviour of a laser beam welded Ni-base superalloy during high temperature cyclic deformation | |

T. Spirowski, A. Fischer, R. Saggau, H. Pries, H. Wohlfahrt |

Fatigue behaviour of a micro-sized austenitic stainless steel with fine grains | |

G. P. Zhang, K. Takashima, M. Shimojo, Y. Higo |

Fatigue behaviour of a pultruded glass-reinforced polymer-matrix composite material | |

L. B. Godefroid, W. A. Morais, G. P. Silva, J. A. Martins |

Fatigue behaviour of a single crystal nickel superalloy used in heavy-duty gas turbine blade with thin film cooling | |

Y. Pan, R. Zimmer, B. Bischoff-Beiermann, D. Goldschmidt |

Fatigue behaviour of multiphase steels for automotive applications | |

L. Tosal-Martinez, J. Keichel, N. Akdut |

Fatigue behaviours of a martensitic compressor valve stainless steel with small amount of retained austenite | |

G. Chai, S. Olsson, P. Liu, T. Larsson |

Fatigue crack growth acceleration effects under helicopter loading spectra | |

V. Zitounis, P. E. Irving, D. Matthew, R. Cook, S. Jenkins |

Fatigue crack growth behaviour of micro-sized specimens prepared from amorphous alloy thin films | |

K. Takashima, Y. Higo, M. V. Swain |

Fatigue crack growth in ferroelectrics driven by cyclic electronic loading | |

D. Fang, B. Liu, Z. hang, K. C. Hwang |

Fatigue crack growth predictions in AA 5083 and AA 2024 using a simple geometric model | |

T. Riemslag, K. van Kranenburg, S. Benedictus-de Vries, F. Veer, J. Zuidema |

Fatigue crack growth under simple variable amplitude load sequences | |

L. P. Borrego, J. M. Ferreira, J. M. Costa |

Fatigue crack growth with tensile residual stresses | |

Y. Prawoto, R. A. Winholtz |

Fatigue crack initiation (FCI) life prediction for a flat plate with a central hole | |

T.-L. Teng, C.-C. Liang, P.-H. Chang |

Fatigue crack initiation and propagation from reinforcement fiber ends for Ti-alloy matrix composites | |

K. Hirano, S. Miyake, H. Yoshida |

Fatigue crack propagation limit curves for metallic and non-metallic materials | |

J. Lukacs |

Fatigue crack propagation of dissimilar metal welds | |

C. S. Kusko, J. N. DuPont, A. R. Marder, S. Spooner |

Fatigue damage and compressive residual strength of a woven PMC subjected to cyclic hygrothermal conditioning | |

M. G. Castelli, J. C. Thesken |

Fatigue damage and repair of 250 kN portal crane in shipyard | |

Z. Domazet, Z. ozina, T. Pirsic |

Fatigue damage in advanced polymer matrix composites | |

H. E. Carroll, T. J. Mathams, D. M. Knowles, A. J. Davies |

Fatigue damage in unidirectional laminate composites under constant stress and constant strain loading conditions: a comparative study | |

N. Bonora, M. Newaz |

Fatigue fracture plane direction assessment through the weight function method | |

A. Carpinteri, A. Karolczuk, E. Macha |

Fatigue life calculation of fillet-rolled components at axial cyclic loading | |

M. Richter, T. Seeger |

Fatigue life extension of austenitic stainless steel using nano-sized-martensites formed at intersections of dislocations | |

T. Inamura, M. Shimojo, K. Takashima, Y. Higo |

Fatigue of steel structures | |

P. Broz |

Fatigue Prediction of the Life time of screw on a large range of mean stresses | |

A. Duval, P. Robinet, F. Trivaudey, P. Delobelle |

Fatigue reliability evaluation and fracture analysis at elevated temperature related to safety guarantee of industrial use Pt alloy | |

S. Hitomi, H. Suzuki, M. Nakamura |

Fatigue strength and fracture mechanism of silicon nitrides studied by AE waveform simulation | |

A. Yonezu, T. Ogawa, M. Takemoto |

Fatigue-creep interactions in solder alloys | |

J. E. Moffatt, W. J. Plumbridge |

FEM simulation of mixed mode crack propagation induced by hydraulic fracturing | |

K. Sato, M. Itaoka, T. Hashida |

Fiducial marks as a measure of thin film crack arrest toughness | |

A. Volinsky, M. L. Kottke, I. S. Adhihetty, W. Gerberich |

Finite deformation energy release rate computations in a steady rolling tire | |

S. Govindjee |

First principles molecular dynamics calculation on the tensile strength of Ai grain boundary | |

G. H. Lu, M. Kohyama, R. Yamamoto |

First-principle and classical molecular dynamics study on tensile and shear strength of silicon nitride | |

S. Ogata, H. Kitagawa, N. Hirosaki |

First-principles calculations of the tensile strength and fracture of coincidence tilt boundaries in SiC | |

M. Kohyama |

Flow and fracture of free-standing metallic thin films and multilayers | |

F. Spaepen, H. Huang |

Flowstress of steel at large strains and high strain rates | |

G. Pape, M. Janssen, A. Bakker |

Fluid-structure interaction related aspects during the grouting of cracks in concrete | |

H. N. Linsbauer |

Foreign object damage and high-cycle fatigue thresholds in Ti-6-6Al-4V | |

J. O. Peters, B. L. Boyce, J. M. McNaney, R. O. Ritchie |

Formal considerations about fracture: nucleation and growth | |

J. P. Sethna |

Formation and evaluation of HAp films by electrochemical method | |

S. Ozone, Y. Kimura |

Formation of hierarchial ordered crack systems at fracture | |

R. V. Goldstein, N. M. Osipenko |

Formation of hierarchical ordered crack systems at fracture | |

H. Kisu, Y. Kondo, G. Rong |

Formation of TiO2* thin film by ion-beam-mixing method and its application as the corrosion protecting film | |

Y. Kimura, H. Saito |

Fractal and fracture mechanics analyses on fatigue fracture surfaces of metallic materials | |

T. Sakai, T. Sakai, A. Ueno |

Fractal fracture surfaces and fluid displacement process in fractured rocks | |

T. Babadagli, K. Develi |

Fractographic analysis of fish-eye type fatigue crack in two high strength steels | |

K. Mori, A. Uchiyama, Y. Yamada |

Fractography of S.E.N. soft soldered composite laminates made from 0.8% carbon manganese steel under plane strain conditions | |

M. R. Sabayo |

Fracture and creep rupture behavior of notched oxide/oxide and SiC/SiC composites | |

R. John, D. J. Buchanan, L. P. Zawada |

Fracture and fatigue behaviour of toughened DRA, AI-Be, and bulk metallic glass composites | |

J. J. Lewandowski, J. Larose, S. Solv'yev |

Fracture and multi-scale simulations of thin films structures | |

R. H. Dauskardt |

Fracture at compression | |

R. V. Goldstein |

Fracture behavior of conductive cracks in PZT-4 piezoelectric ceramics | |

T. H. Wang, R. Fu, T. Y. Zhang |

Fracture behaviour of a corroded annular plate under a multi-axial stress state | |

M. Ohashi |

Fracture behaviour of a fibre-bridged crack | |

X. Zhang, H.-Y. Liu, Y.-W. Mai |

Fracture behaviour of a SiCw/6061Al alloy composite under cyclic loading | |

L. Wang, T. Kobayashi, Z. M. Sun, H. Toda |

Fracture behaviour of blends consisting of asymmetric styrene/butadiene block copolymers | |

R. Adhikari, R. Lach, G. H. Michler, R. Weidisch, W. Grellmann |

Fracture behaviour of injection moldings with weld line | |

H. Hamada, K. Yamada, K. Tomari |

Fracture control in glass through lamination | |

F. A. Veer, S. Benedictus-de Vries, C. van Kranenburg |

Fracture criterion for piezoelectric materials with defects based on energy density theory | |

A. K. Soh, D. Fang, K. L. Lee |

Fracture evaluation of in-situ sensors for high temperature applications | |

S. C. Forth, A. Stroselsky |

Fracture in chromium: an attempt to improve ductility | |

R. Wadsack, R. Pippan, B. Schedler |

Fracture in metakaolin concrete under different loading conditions | |

B. B. Sabir, S. Wild |

Fracture initiation and crack growth - cohesive zone modeling and stereoscopic measurements | |

C. R. Chen, O. Kolednik, F. D. Fischer, I. Scheider, T. Siegmund, A. Tatschl |

Fracture mechanical characterization of semicrystalline thermoplastics | |

H. H. Kausch, Ph. Beguelin, Ch. Grein, C. J. G. Plummer |

Fracture mechanics and durability of high performance concrete | |

F. H. Wittmann |

Fracture mechanics characterisation of epoxy resins by means of mini-compact-tension-specimens | |

C. Bierogel, H. Walter, W. Grellmann, H. Henning, B. Michel |

Fracture mechanics evaluation of post yield fatigue crack initiation and propagation | |

G. S. Wang, A. F. Blom |

Fracture mechanics models for the analysis of composite materials with a nonlinear matrix | |

A. Carpinteri, G. Ferro, G. Ventura |

Fracture mechanism of a bainite steel in pre-cracked and notched specimens at low temperature | |

C. Yan, O. H. Qin, J. H. Chen |

Fracture mechanisms for SiC fibers and SiC/SiC composites under stress-rupture conditions at high temperatures | |

J. A. Di Carlo, H. M. Yun, J. B. Hurst |

Fracture mechanisms in B2 NiTi shape memory alloys | |

N. Yang |

Fracture of concrete cylinders subjected to torsion | |

G. Lilliu, J. G. M. van Mier |

Fracture of Ferritic Steels; the effects of the Ductile Brittle Transition on Carbides within the Plastic Zone | |

M. D. Coates, S. G. Roberts |

Fracture of nanostructured FCC materials | |

F. Ebrahimi |

Fracture of piezoelectric materials | |

T. Y. Zhang, M. H. Zhao |

Fracture of thermal sprayed nanostructured coatings | |

M. Gell, L. Shaw, E. Jordan, H. Luo, D. Goberman |

Fracture of verbetral bone gotten surgical screw insertion | |

T. Tamaki, S. Nguyen, K. Takahashi, M. Yamagata |

Fracture predictions for ductile steel | |

G. Pape, M. Janssen, A. Bakker |

Fracture process of PM Ti6A14V at 20K in presence of impurities | |

L. Briottet, N. Scheer, D. Guichard |

Fracture strength degradation of Si-based ceramics by molten salt corrosion | |

N. Masuda, Y. Kimura |

Fracture strength of ceramic nozzle blades under thermal shock conditions | |

T. Mikami, K. Tagashira, M. Obata |

Fracture toughness and failure mechanism of polymer-introduced porous Hap composites | |

H. Suemasu, T. Wada, M. Aizawa, K. Gozu, A. Nozue, K. Itatani |

Fracture toughness and fracture processes in ductile metallic foams | |

C. Motz, R. Pippan |

Fracture toughness characterization of hydrogen embrittled Cr-Mo steel | |

Y. Wada, Y. Tanaka |

Fracture Toughness Envelope of a Limestone Rock at High Confining Pressure and Temperature | |

N. A. Al-shayea, K. Khan |

Fracture toughness measurement of small cracks in high strength steel wire | |

B. Bromage, T. J. Marrow |

Fracture toughness of niobium/sapphire interfaces: effect of interface doping and ion assisted deposition | |

G. S. Was, H. Ji |

Fracture toughness of polymer interfaces: From the molecular to the continuum scale | |

C. Creton, E. J. Kramer, H. R. Brown, C. Y. Hui |

Fracture toughness tests for micro-sized specimens | |

K. Takashima, Y. Ichikawa, Y. Higo, M. V. Swa |

Free edge and interaction effects on the strength of finite-sized interface bonds | |

H. M. Jensen |

Functionally graded materials: effect of elastic heterogeneity on the toughness | |

V. Cannillo, W. C. Carter |

Grain boundary resistance to cleavage fracture in Fe-3% si alloy and FE polycrystals: experiments and modeling | |

A. S. Argon, Y. Qiao |

Grain size effect on fatigue crack initiation condition observed by using atomic-force microscopy | |

Y. Nakai, K. Maeda |

Growth of cracks in steel under repeated thermal shock in a chemically controlled environment | |

J. W. H. Price, B. B. Kerezsi, R. Ibrahim |

Growth of fatigue cracks from cold expanded holes | |

M. J. Pavier, A.A. Garcia-Granada, V. D. Lacarac, D. J. Smith |

High resolution analytical characterization of stress corrosion crack tips | |

S. M. Bruemmer, L. E. Thomas |

High speed debonding and frictional sliding in composite systems: experimental observations and numerical simulation | |

J. Lambros, X. Bi, P. H. Geubelle |

High strain rate behaviour of high strength steels for automotive applications | |

O. Moriau, P. Verleysen, J. Degrieck, N. Akdut |

High strain rate deformation behavior of Al-Mg alloys | |

T. Masuda, T. Kobayashi, H. Toda |

High temperature creep damage of fabricated structures | |

F. W. Brust |

Hydrogen effects on the localization of plastic deformation at a crack tip: implications for fracture | |

P. Sofronis, Y. Liang |

Hydrogen induced crack growth rate in steel plates under uniaxial stress | |

J. L. Gonzalez, R. Ramirez, J. M. Hallen |

Hydrogen/length scale interactions during small volume yielding and fracture | |

W. Gerberich, N. I. Tymiak |

Hydrogen, Hydrides, and Crack Tip Deformation in Titanium | |

C. L. Briant, Z. F. Wang, K. S. Kumar |

Hydrogen, hydrides and crack tip deformation | |

C. L. Briant |

Image analysis of hydrogen-assisted micro-damage in progressively drawn pearlitic steel | |

J. Toribio, F. J. Ayaso, E. Ovejero |

Impact strength of cracked structural member | |

I. Maekawa, K. Uda |

Impact welding of aluminium tube to a stainless steel target - effect of deformation of tube on bonding condition | |

H. Date |

Importance of crack tunneling during fracture: experiments and CTOA analyses | |

M. A. James, J. C. Newman |

Improvement of mechanical properties of alumina particulate composites using polycrystalline alumina powder | |

K. Kageyama, K. Ohi, H. Kato |

Improving the adhesion strength of PET/PMMA composite by radio frequency plasma treatment | |

M. O. H. Cioffi, H. J. C. Vorwald |

In search of a parameter for fretting fatigue | |

T. Nicholas, A. Hutson, S. Olson, N. Ashbaugh |

In vitro bioactive functional and fracture strength of biomaterial in a simulated body fluid | |

N. Hisamori, A. Nozue, M. Aizawa, H. Suemasu |

In-situ characterization of matrix response to fiber fractures | |

J.C. Hanan, I.J. Beyerlein, E. Ustundag, G.A. Swift, B. Clausen, D.W. Brown |

In-situ ultrasonic characterization of fatigue crack initiation and evolution from surface damage | |

S.I. Rokhlin, J.-Y. Kim |

Indentation-induced damage of thin-films supported on substrates | |

A. H. W. Ngan |

Inducing 'pure' mode II shear failures in laminated composites | |

S. R. Short, C. P. Sastry |

Inelastic cyclic stress-strain response in silicon-nitride ceramics at elevated temperatures | |

K. Hatanaka, K. Oshita, Y. Ishiga, H. Toyama |

Inelastic cyclic stress-strain response in silicon-nitride ceramics at elevated temperatures | |

K. Hatanaka, K. Oshita, Y. Ishiga, H. Toyama |

Influence coefficients to calculate stress intensity factors for an elliptical crack in a plate | |

P. Le Delliou, B. Barthelet |

Influence of annealing process on ultrafast carrier dynamics for an ion-implanted silicon surface | |

H. Donen, Y. Inagaki, K. Katayama, M. Fujinami, T. Sawada |

Influence of hydrostatic pressure on multiaxial fatigue of notched components | |

G. Quilafku, G. Pluvinage |

Influence of loading changes on the fatigue crack growth | |

M. Sander, H. A. Richard |

Influence of loading rate on shear fracture toughness for failure mode transition | |

J. F. Kalthoff, A. Burgel |

Influence of phase transformation on subcritical crack growth in numerical modelling of a ceramic composite | |

T. Niezgoda, W. Szymczyk, J. Zurek |

Influence of residual stress on ductile crack initiation and growth in dissimilar metal weld joints | |

A. Sherry, D. Lidbury, D. Beardsmore |

Influence of residual stress on super-long life fatigue properties of high strength steel SNCM439 | |

T. Matsumura, Y. Ochi, S. Yoshida, K. Masaki |

Influence on low cycle fatigue properties of bond coat oxidation for a thermal barrier coating | |

H. Brodin, S. Johansson |

Inhomogeneity effects on crack growth | |

N. K. Simha, F. D. Fischer, O. Kolednik |

Initial cracks in saturated swelling soils | |

V. Y. Chertkov |

Interface crack in a periodically layered bimaterial composite | |

M. Ryvkin, L. Kucherov |

Interfacial adhesion and crack initiation at metal/ceramic interface | |

S. X. Mao, M. Z. Li |

Interfacial force microscopy studies of y-APS on glass and SI02 | |

K. M. Liechti, K. C. Vajapeyajula, M. Wang, H. Cabibil, H. Celio, J. M. White |

Internal damage to wire ropes on crane: Case studies of fracture accidents and countermeasures for prevention | |

M. Tanaka |

Introduction of the hamiltonain system into the asymptotic analysis in fracture mechanics | |

J. Li |

Investigation of fracture criterion for composite using CTS specimen | |

R. Rikards, A. K. Bledzki, F.-G. Buchholz |

Investigation on oblique impact response of composite cylindrical shells | |

W. Z. Nie, W. K. Binienda |

Issues in fracture toughness and r-curve behavior of particle reinforced metal matrix composites | |

B. S. Majumdar |

K-R curves of thin 2195-T8 aluminium alloy plate | |

R. Doglione, D. Firrao |

Kic - a non measure of plane strain fracture toughness | |

K. Wallin |

Length scales for the fracture of nanostructures | |

W. Gerberich |

Loading rate dependence of mode I fracture behavior of rubber toughened PMMA | |

M. Todo, K. Takahasi |

Local fracture properties in MMC's | |

O. Kolednik, I. Sabirov |

Long term prediction of fatigue life for FRP joint systems | |

Y. Miyano, M. Nakada, N. Sekine, S. W. Tsai |

Low cycle fatigue of alumina | |

M. T. Kokaly, A. S. Kobayashi, K. W. White |

LRM constitutive model for describing functionally graded material with fast propagating crack | |

M. Nakagaki, Y. Wu |

Major aspects of mixed-mode problems | |

H. A. Richard |

Material response with cell method | |

F. Cosmi |

Materials with cracks and pores: micromechanics, cross-property correlations and applications | |

M. Kachanov, I. Sevostianov |

Mathematical model of a crack on an imperfect interface | |

Y. A. Antipov, A. B. Movchan |

Measuring crack tip deformation with nanoscopic resolution | |

Y. M. Xing, W. Yang |

Mechanical and fracture properties of methacrylic particle-modified PVC | |

Y. Nakamura, E. Takekuni, Y. Kinugawa, T. Iida |

Mechanical behavior and electrical resistance change in carbon particle dispersed plastic composite | |

D.-Y. Song, Y. Hirata, N. Takeda |

Mechanical properties of ionomer/clay nonocomposite-modified epoxy | |

S. Matsuda, H. Akimoto, A. Murakami |

Mechanical properties of tungsten fiber reinforced Ti-6A1-4V alloy by HIP fabrication | |

S. Y. Son, S. Nishida, N. Hattori, K. Hayashi, K. Nakano |

Mechanical properties, adhesion and fracture toughness of low-k dielectric thin films for microelectronic applications | |

I. Adhihetty, J. Vella, A. Volinsky, C. Goldberh, W. Gerberich |

Mechanics-based modeling of dynamic fragmentation and comparison with experiments | |

W. J. Drugan |

Mechanisms of fracture in pearlitic steels with different degrees of cold drawing | |

J. Toribio, F. J. Ayaso, M. Toledano |

Mechnical behaviour and electrical resistance change in carbon particle dispersed plastic composite | |

D.-Y. Song, Y. Hirata, N. Takeda |

Meso-fracture of metal matrix composites reinforced by particles of large volume fraction | |

W. Yang, C. Zhou, D. Fang |

Mesodamage of 2024-T3 aluminum alloy specimen due to corrosion-induced localized hydrogen embrittlement | |

A. T. Kermanidis, P. Papanikos, S. G. Pantelakis |

Method for estimating service load from striation width and height | |

K. Furukawa |

Microelectromechanical structures for multi-axial fatigue testing | |

K. Komvopoulos |

Micromechanical modeling of hydrogen-induced fracture modes in IN903 | |

B. P. Somerday, N. R. Moody |

Micromechanics based approach to the damage and ultimate failure of brittle matrix composites | |

J. Lamon |

Micromechanics in graphite fiber/epoxy composites during creep | |

C. H. Zhou, L .S. Schadler, I. J. Beyerlein |

Micromechanisms of fatigue in polysilicon MEMS structures | |

S. Allameh, P. Shrotriya, B. Gally, S. Brown, W. O. Soboyejo |

Microstructural features of short crack growth in a Beta-titanium Alloy | |

U. Krupp, W. Floer, H.-J. Christ, A. Schick, C.-P. Fritzen |

Microstructure and mechanical properties of laser cladded steel plates | |

S. Niederhauser, B. Karlsson |

Mixed mode I/II fracture toughness of mild steel | |

M. Srinivas, S. V. Kamat, P. Rama Rao |

Mode-I delamination characterisation of cross-ply fibre-metal laminates | |

J. Laliberte, P. V. Straznicky, C. Poon |

Model of mechanics for fiber reinforced Ti alloy matrix composites under thermomechanical loading | |

L.-S. Niu, Q.-Y. Hu, H.-J. Shi, C. Robin |

Modeling of crack-opening stress levels under different service loading spectra and stress levels for a 1045 annealed steel | |

M. Khalil, T. H. Topper, K. Soudki |

Modeling of residual stress effects using eigenstrain | |

M. R. Hill |

Modeling the effects of residual stresses on cleavage fracture in welded steel frames | |

C. G. Matos, R. H. Dodds |

Modelling crack propagation: a phase field approach | |

L. O. Eastgate, J. P. Sethna, M. Rauscher, C. R. Myers, C. S. Chen |

Modelling of damage evolution equation of PZT ceramics and its application to crack growth analysis | |

M. Mizuno, Y. Honda, H. Kato |

Modelling of plastic effects during small fatigue-crack growth | |

O. Y. Andreykiv, V. V. Panasyuk, R. O. Ritchie, O. I. Darchuk |

Modelling of size effects on fracture in the brittle-to-ductile transition regime | |

A. H. Sherry, D. P. Lidbury, D. C. Connors, A. R. Dowling |

Modelling of transversly isotropic blister test specimen | |

F. S. Kadioglu |

Modelling the effects of microstructure and microtexture on the statistics of short fatigue crack growth | |

A. J. Wilkinson |

Modelling the processes of micro-defects nucleation in thin-film interconnects of integrated circuits at electromigration | |

R. V. Goldstein, M. E. Sarychev, D. B. Shirabaikin, A. S. Vladimirov, Y. V. Zhitnikov |

Modified electrochemical emission spectroscopy (MEES) as NDT method of detection of SCC of metallic alloys | |

K. Habib |

Molecular dynamics simulation of crack propagation in HCP crystals | |

S. Ando, K. Takashima, H. Tonda |

Monitoring part-through crack growth using the compliance technique | |

N. Parida, S. Tarfder |

Morphology of cracks and damage in various materials | |

E. Bouchaud |

Multipass welding simulation of tig welded AISI 316LN | |

C. H. L. J. ten Horn, G. W. Medendorp, J. Zuidema, A. Bakker, P. G. de Heij, D. d'Hulst |

Multi-scale fatigue of As-cast lightweight structural metals | |

K. Gall, M. Horstemeyer, D. L. McDowell, J. Fan, N. Yang |

Nanoindentation and fracture analysis of thin solid films | |

K. Sriram, R. Narasimhan, S. K. Biswas |

Nano-indentation fracture with a corner cube indenter | |

J. S. Field, R. Dukino, N. Iwashita, M. V. Swain |

Near the fatigue limit in glass | |

S. Wiederhorn |

Near tip behaviour in a particulate composite material under constant strain rates including temperature and thickness effects | |

C. T. Liu, C. W. Smith |

New considerations and results on crack separation energy rated in elastic-plastic fracture mechanics | |

Y. Wadier, E. Lorentz |

New type steel having superior brittle crack arrestibility and its application to improve structural integrity | |

T. Ishikawa, T. Inoue, Y. Hagiwara, H. Yajima |

Non-contact detection of delamination in impacted cross-ply CFRP using laser generated lamb waves | |

Y. Mizutani, H. Nishino, M. Takemoto, K. Ono |

Nonlinear dynamics of crack propagation (experimental and theoretical study) | |

O. Naimark, V. A. Baranninkov, S. V. Uvarov |

Nonlinear fracture mechanics of delamination failure in a composite strengthened concrete beam | |

C. K. Y. Leung, M. Klenke, W. K. Tung, H. C. Y. Luk |

Notch effect of micro polycrystalline silicon cantilever | |

S. Hamada, S. Tani, M. Horikawa, H. Otani, M. Tsugai, E. Yosikawa |

Notch fracture mechanics: a review of fracture criteria used in elastic and elastroplastic cases | |

G. Pluvinage |

Notch fracture of MEMS sensors made of single crystal silicon | |

Z. L. Zhang, W. Westby, T. Wang |

Notch strength and notch sensitivity of polymethyl methacrylate | |

H. Wang, J. Yan, X. Zheng |

Notch strength of spheroidal graphite cast iron under tension loading | |

K. Zhao, J. Sun, J. Yan, X. Zheng |

Numerical investigation of fatigued composites under cyclic compression spectra | |

A. Pelegri, D. Kedlaya |

Numerical modelling of ceramic materials microstructures for residual stresses concentrations | |

T. Niezgoda, W. Szymczyk, J. Malachowski, M. Woropay |

Numerical representation of plastic J-Integral variation along the crack front of semi-elliptical surface crack under uniform tension | |

M. H. Sharobeam, R. Stockton |

Numerical simulation of concrete failure in pull-out experiments | |

P. Pivonka, R. Lackner, H. A. Mang |

Numerical simulation of crack tip fields and toughening mechanisms in ternary polymer blends | |

T. Seelig, E. van der Giessen, D. Gross |

Numerical simulation of micro and nano scale fracture | |

M. Zhou |

Numerical simulation of the surface fatigue crack growth using VCE method | |

T. Nishioka, Q. Hu, T. Fujimoto |

Numerical simulations of dynamic interfacial fracture phenomena | |

T. Nishioka, Q. Hu, T. Fujimoto |

Numerical study of the probability of fracture of glass under stress corrosion | |

H. Auradou, D. Vandembroucq, C. Guillot, E. Bouchaud |

Numerical, experimental, nondestructive, and image analyses of damage; progression in cast A356 aluminium notch tensile bars | |

M. F. Horstemeyer, K. Gall, K. W. olan, A. aters, A. M. Gokhale, M. D. Dighe |

Observation of fatigue crack initiation and early propagation in ultrafine-grained steel by atomic force microscopy | |

H. Kimura, Y. Akiniwa, K. Tanaka, J. Kondo, T. Ishikawa |

Offset method for determination of lower-bound fracture toughness in the transition temperature region | |

T. Iwadate, H. Takemata |

On anisotropy effects in ductile fracture: Theory and applications | |

A. A. Benzerga, J. Besson, A. Pineau |

On brittle fracture in FCC - metal | |

P. Panfilov |

On fatigue limit of notched components | |

M. D. Chapetti, T. Tagawa, T. Miyata |

On Predictive Modeling for the assessment of Fracture Behaviour in ferritic alloys | |

A.N. Kumar |

On size of quantum bag and cracking | |

K. J. Cheng, S. Y. Cheng |

On the applicability of the essential work of fracture method to thick abs Se(b)-specimens | |

P. Luna, E. Lievana, C. Bernal, P. Frontini, Y.-W. Mai |

On the crack extension force of curved cracks | |

K. Eriksson |

On the crack stability in metal particulate reinforced brittle matrix composites | |

M. Kotoul, R. Urbis |

On the detection of fatigue damage prior to surface indication | |

G. Wheatley, D. Barton, K. Davey |

On the ductile fracture in cylindrical tube bulging under impulsive loading | |

Y. Sato, K. Kono, H. Ogawa |

On the essential work of fracture: Application to characterise thin polymer films fracture | |

L. Cousin-Cornet, M. Nait Abdelaziz, C. C. Cazeneuve, G. Mesmacque |

On the fatigue crack tip driving force: Role of crack tip plasticity | |

G. Glinka, R. L. Holtz, K. Sadananda, A. K. Vasudev |

On the size scaling of cleavage toughness in the transition: A single variable experiment and model based analysis | |

H. J. Rathbun, G. R. Odette, M. Y. He |

Optimal shape design of stress releasing holes | |

P. Pedersen |

Optimization of a dynamic fracture process with 1D model | |

H. Maigre |

Optimization of delamination fracture toughness using design of experiments and genetic algorithms | |

A. Pelegri, A. Tekkam |

Optimizing cement-based coatings with respect to shrinkage crack formation | |

G. Martinola |

Optimizing structural integrity through reliable residual stress measurement | |

L. Edwards |

Oxide fiber-coatings for controlled fracture in robust ceramic composites | |

R. Kerans |

Oxygen enhanced crack growth in nickel-base superalloys under sustained and fatigue loading | |

R. Wei, Z.-F. Huang, C. Miller, G. W. Simmon |

Particulate toughening of unsaturated polyester: effect of particle size and volume fraction | |

R. P. Singh |

Plane stress and strain in side-grooved CCT-specimens | |

C. van Kranenburg, T. Riemslag, S. de Vries, J. Zuidema, F. Veer |

Plastic and buckling behaviours of tubular beams under combined bending and torsion | |

G. H. Nie |

Plastic behaviour of nano-scale silicon structure at intermediate temperatures | |

Y. Isono, T. Namazu, T. Tanaka |

Plastic flow and fracture of bulk nanocrystalline ceramics and intermetallics in indentation | |

H. Kimura |

Plastically dominant / elastically dominant fatigue interaction | |

Y. K. Wong, X. Z. Hu, M. P. Norton |

Plastic-damage model for stress-strain behaviour of soils | |

N. Al-Shayea, K. Mohib, M. Baluch |

Post-impact fatigue behavior of high temperature polymer matrix composites | |

K. Hirano |

Predicting the fatigue-life of structural adhesive joints | |

A. J. Kinloch, A. J. Curley, H. Hadavinia, A. C. Taylor |

Prediction for dry sliding wear in P/M alloy: A back-propogation ANN approach | |

M. E. Haque, K. V. Sudhakar |

Prediction of ductile crack growth in polyethylene using measured traction-separation curves | |

J. G. Willams, K. C. Pandya, A. Ivankovic |

Prediction of fatigue crack growth in martenistic high strength low alloy steels | |

P. Hubner, G. Pusch |

Prediction of fracture initiation at three-dimensional bimaterial interface corners: Application to butt-joints loaded in bending | |

P. E. W. Labossiere, M. L. Dunn |

Prediction of probability distribution of notch strength of ceramics | |

J. Yan, X. L. Zheng, K. Zhao, H. Wang |

Predictive model for the steady-state failure of adhesively-bonded joints with extensive plastic yielding | |

T. Ferracin, T. Pardoen, F. Delannay, C. M. Landis, J. Y. Sener |

Prestraining effect on creep creep behaviour of nickel-base superalloy | |

Y. H. Zhang, D. M. Knowles |

Probabilistic failure assessment of a carbon-carbon shell for the earth entry vehicle concept | |

R. E. Kurth, F. W. Brust |

Propagation of a fluid-driven penny-shaped fracture parallel to the free-surface of an elastic solid | |

X. Zhang, R. Jeffrey, E. Detournay |

Qualification of cleavage fracture toughness on the basis of local fracture criterion approach | |

T. Miyata, T. Tagawa, C. E. Chaves |

Qualification of cleavage fracture toughness on the basis of local fracture criterion approach | |

T. Miyata, T. Tagawa, C. Chaves |

Quasi-Micromechanical modelling of evolutionary damage in quasi-brittle solids | |

X. Q Feng, S. W. Yu |

Quench cracking resistance of powder metallurgy superalloys | |

K. M. Chang |

Rate and temperature dependence of the mechanical properties of cheddar cheese | |

V. Imbeni, A. G. Atkins, G. Heronimidis, J. Yeo |

Real-time health monitoring system available for any anisotropic condition on CFRP | |

J. H. Koo |

Real-time speckle interferogram analysis and its application to sub-surface delamination crack detection in carbon fibre composites | |

J. M. Huntley, C. R. Coggrave, Y. Shen |

Recent advances of photo-thermal spectroscopy | |

T. Sawada, K . atayama |

Recent developments in the Weibull Stress Model for prediction of cleavage fracture in ferritic steels | |

X. Gao, R. Dodds |

Reconstruction of fracture process of spheroidal graphite cast iron by analyzing the confocal scanning laser microscope images | |

Y. Mori, Y. Obata, P. Kriengsak, T. Umeda, S. Nose |

Re-examination of over specified condition of stress intensity factor for multi-material wedges and junctions | |

W.-C. Wang, S.-W. Lin |

Relationship between Rockwell C hardness and inelastic material constants | |

A. Hirano, M. Sakane, N. Hamada |

Residual strength analyses of single - and multiple-stiffened wide panels | |

B. R. Seshadri, J. C. Newman |

Residual stress effects on fatigue crack propagation in friction stir welds | |

C. Dalle Donne, G. Raimbeaux |

Residual stress estimated by new empirical method and its correlation with strength in ceramics | |

T. Hoshide, J. Abe |

Residual stress in piezolectric thin film prepared by pulse laser beam ablation | |

Y.C. Zhou, Z. Y. Yang, X. J. Zhang, J.Y. Li |

Resonance and crack propagation in prestressed orthotropic materials containing an inclined crack | |

E. M. Craciun, E. Soos |

Response and failure of composite structures exposed to fire | |

K. Reifsnider, J. Burdette |

Reverse bending fatigue failure of an emergency power turbine shaft | |

N. S. Xi, P. D. Zhong |

Reverse bulging and plugging in metal foil induced by high power laser | |

Y. C. Zhou, Z. P. Duan |

Revisited energy criteria for interface crack deflection | |

D. Leguillon, C. Lacroix, E. Martin |

Role of Nondestructive Evaluation for the Purpose of the Understanding Fracture Mechanism | |

T. Kishi |

Role of twining in brittle fracture: Intermetallic compounds | |

M. H. Yoo |

Roughness Waves as Detected on Glassy Materials by DCdc experiments in the Low Speed Regime: The Role of Microstructure | |

C. Marliere, F. Despetis, J. Phalippou |

Rubber-particle-size dependent strain rate effects on mechanical properties and de formation behaviour of high-impact polystyrene | |

T. Kuboki, K. Takahashi, P. Y. Ben Jar, T. Shinmu |

Scaling of quasi-brittle fracture: morphology of crack surfaces and asymptotic analysis | |

S. Morel, E. Bouchaud, G. Valentin |

Scientific support for the investigation of a helicopter collision | |

K. P. Roberts, G. Clark |

Scratch Testing and acoustic emission of nanostructured partially stabilized zirconia | |

M. R. Gold, R. S. Lima, A. Kucuk, C. C. Berndt |

Self-consistent constitutive modeling of particle dispersed composite materials with micro-crack type damage | |

M. Nakagaki, H. Chang, Y. Wu |

Self-Healing Polymer Composites | |

S. White, E. N. Brown, M. R. Kessler, S. Sriram |

Semi-weight function method of three dimensional problem in fracture mechanics | |

L. Chuntu, M. Kaiping |

Shape sensitivity and reliability analyses in nonlinear fracture mechanics | |

G. Chen, S. Rahman |

Shear lag modelling of thermal stresses in unidirectional composites | |

C. M. Landis |

Short fatigue crack growth under multiaxial nonproportional loading | |

J. Hoffmeyer, R. Doring, T. Seeger, M. Vormwald |

Simulation of adiabatic shear band propagations | |

S. Li, W. K. Liu, A. J. Rosakis |

Simulation of crack propagation in heterogeneous brittle solids: scaling parameters | |

V. V. Silberschmidt |

Simulation of damage mechanisms in high speed grinding of structural ceramics | |

P. Geubelle, S. Maiti |

Simulation of domain switch-toughening in ferroelectric ceramics | |

M. Kuna, A. Ricoeur |

Simulation of fatigue crack propagation processes in arbitrary three-dimensional structures with the program system | |

M. Fulland, M. Schollman, H. A. Richard |

Simulation of fatigue crack propagation rates in smooth bending specimens, from the onset of loading, using the two-term model | |

H. Saguy, M. P. Weiss, D. Rittel |

Simulation of probability distribution of fatigue life of notched friction welded joints under variable-amplitude loading | |

J . an, X. L. Zheng, K. Zhao, H. Wang |

Simulation of propagation of small fatigue cracks interacting with grain boundary | |

A. Akiniwa, K. Tanaka, H. Kimura |

Simulation transverse fracturing of thin plastic sheet | |

B. J. Carter, A. R. Ingraffea, Y.-H. Lai |

Size effect of corrosion fatigue properties in micro-sized 304 austenitic stainless steel specimens | |

Y. Mizutani, M. Shimojo, K. Takashima, Y. Higo |

Slow brittle fracture | |

C.J. McMahon Jr. |

Small fatigue crack initiation and growth behavior of Fe-0.5Ni-1Mo sintered steel | |

A. Sugeta, M. Jono, Y. Uematsu |

Softening behaviour of plain concrete beams | |

A. P. Fantilli, P. Vallini |

Software methodologies for multiscale descriptions of defects, deformation and fracture | |

C. Myers, C.-S. Chen, T. Cretegny, N. P. Bailey, A. J. Dolgert, L. O. Eastgate |

Some aspects of fatigue crack propagation after overloading cycles | |

M. Da Silva Ramos, M. Venicius Soares Pereira, M. Venicius Soares Pereira |

Spalling of railway tunnel concrete and its causes | |

T. Asakura, K. Mizuno, K. Yashiro, T. Muguruma, Y. Matsuda |

Spatial statistics of particle clusters and modelling of pitting corrosion | |

D. Harlow, R. P. Wei |

SQUID damage monitoring for austenitic stainless steel | |

T. Suzuki, K. Hirano, T. Terawoto |

Standardisation of creep/fatigue crack growth in components | |

K. M. Nikbin |

Static and dynamic fracture properties of high strength steel chain materials | |

D. M. Shuter, J. T. Dutton, W. Geary |

Statistical Study of Fracture in Concrete | |

T. K. Wang, J. M. C. van Mier, T. N. Bittencourt |

Statistics of acoustic emission in paper fracture | |

L. I. Salminen, M. J. Alava, K. J. Niskanen |

Statistics of chemical and mechanical fractures of corroded solids | |

A. Baldassarri, A. Gabrielli, B. Sapoval |

Stereoscopic fracture analysis by SEM using stero matching and secondary electron integrating signals | |

J. Jiang, S. Sakai |

Stochastic analysis of fatigue crack growth | |

C. Proppe, G.I. Schueller |

Strain energy density as the link between global and local approach to fracture | |

H. J. Schindler |

Strength evaluation of the ECCS-GDH piping connection and determination of the critical crack under waterhammer event | |

G. Dundulis, E. Uspuras |

Strength properties in substrate for semiconductor electronic devices by thermal cyclic test | |

N. Okabe, M. Tsutsumi, X. Zhu, Y. Abe |

Stress analysis and life assessment of a gas turbine blade | |

M. Mirzaei, R. Karimi |

Stress analysis near crack tip in mixed-mode condition by speckle photography | |

K. Machida, K. Ushi, H. Okamura |

Stress analysis of beam-to-column connection for earthquake-resistance welded steel structure based on FEM | |

Z. Yufeng, Y. Guochun, H. Lixing, Y. Xinqi, J. Hongyang |

Stress corrosion crack growth behaviour of austenitic stainless steels in hot concentrated chloride solution | |

H. Shaikh, H. S. Khatak, P. Rodriguez |

Stress corrosion cracking mechanism on the basis of the interaction model of dislocation and hydrogen around a crack tip | |

A. T. Yokobori, J. C. Ha, T. Shoji, S. Taketomi, G. F. Li |

Stress intensity factor error index for finite element analysis with singular elements | |

T. Meshii, K. Watanabe |

Stress intensity factor of 3D plane cracks under mode I loading | |

V. Lazarus |

Stress singularities within the cellular core of a sandwich plate | |

W. Becker, J. Hohe, S. Goswami |

Studies on deformation and fracture behaviour of welded plate for a super steel | |

F. Tian, Y. Shi |

Studies on initiation toughness and tearing resistance in weld joints of an offshore structural steel | |

R. K. Pandey, G. K. Purohit, R. S. Parmar |

Study of effects of Notch-Tip and crack-tip Plasticity on Short Fatigue Crack Growth | |

W. Li, X. Zhang, Y.-W. Mai, L. Ye |

Study on crack-nucleating damage of hydraulic concrete | |

Z. Lixiang, L. Qingbin, F. Bohao |

Study on crackpath stability/Instability in a body | |

D. A. Zacharopoulos |

Study on propagation law of surface fatigue crack at notch root in low cycle fatigue under in-plane bending | |

K. Shingai, Y. Yoshi, D. Fukui |

Study on superlong life fatigue in high strength steels | |

Y. Ochi |

Subcase crack propagation threshold and microhardness profile influence in rolling contact fatigue of carburised components | |

G. Donzella, A. Mazzu, L. Solazzi |

Suppression of transverse cracks in CFRP laminates with embedded SMA foils | |

N. Takeda, M. Kobayashi, T. Okabe |

Surface and interface characterization of ferritic stainless steel by 57Fe CEMS | |

K. Nomura, T. Terai, T. Sawada |

Temperature and aging effects on ultimate bearing strength and fatigue of polymeric composite joints | |

W. S. Johnson, W. A. Counts |

Temperature dependence of damage behavior in a silicon nitride for gas turbine by spherical particles | |

Y. Akimune, N. Tooyama, T. Akiba, F. Munakata |

Temperature dependence of fracture toughness in a micro-sized Ni-P amorphous alloy | |

R. Tarumi, M. Shimojo, K. Takashima, Y. Higo |

Tensile and fatigue fracture of discontinuously reinforced aluminum alloys (DRA) | |

N. Chawla, J. J. Williams, G. Piotrowski, R. Saha |

Tensile and low cycle fatigue standard testing for solders - JSMS recommendation | |

M. Sakane, H. Nose, M. Kitano, H. Takahashi, M. Mukai, Y. Tsuka |

Tensile fracture and creep-rupture behaviour of SiC Fibers | |

H. M. Yun, J. A. Di Carlo |

Tension fatigue analysis for woven composite laminates | |

R. A. Naik |

The analysis of the compliance change prior to the onset of the crack growth | |

A. Neimitz |

The anti-plane shear field for crack in infinite slab of a nonlinear damage material | |

L. Tang |

The branching angle of dynamic crack propagation | |

M. Watanabe |

The correlation between temperature, loading rate, and microstructure of polymer blends | |

T. Vu-Khanh |

The dynamic mechanical respondence of weldment with mechanical heterogeneity by split hopkinson pressure bar testing | |

J. X. Zhang, S. L. Gong |

The dynamic punch test in isotropic and composite materials | |

C. Rubio-Gonzalez, J. J. Mason |

The dynamics of multiple neck formation and fragmentation in high rate extension of ductile materials | |

P. R. Guduru, L. B. Freund |

The effect of cold expansion on fatigue resistance on fastener holes | |

J. Vogwell, J. M. Minguez |

The effect of constraint on the field of interface cracks between strength mismatched materials in elastic - perfectly plastic plane strain conditions | |

K. Lowe, J. W. Hancock |

The effect of processing on tensile strength and fracture behavior of CFRP smart composites with embedded shape memory alloy wires | |

B. K. Jang, J.-H. Koo, Y. Xu, N. Toyama, H. Yoshida, Y. Akimune |

The effect of residual stresses and strains on fatigue crack propagation: measurement and modelling | |

D. Nowell, L .J. Fellows, D. A. Hills, Y. Xu |

The effect of specimen thickness during fatigue | |

F. A . eer, J. Zuidema, P. A. Houdijk |

The effect of thickness and crack geometry on material fracture toughness of high-toughness pipeline steels | |

H. Dong, W. Guo |

The effect of thickness on the characterisation of crack tip opening angle for 2024-T351 aluminium alloy | |

S. Mahmoud, K. Lease |

The effects of diffusion on interfacial fracture of multilayer hybrid microcircuit films | |

N. R. Moody, D. P. Adams, D. Medlin, A. Volinsky, N. Yang, W. W. Gerberich |

The fatigue damage of construction materials | |

S. Shamirzaev, S. Ganihanov, G. Shamirzaeva |

The formulae of fatigue crack propagation in polymethyl methacrylate | |

H. Wang, J. Yan, X. Zheng |

The fracture of geopolymers | |

J. F. Silva, C. Thaumaturgo |

The fracture toughness properties of large upset resistance stainless steel welds | |

M. J. Morgan, S. L. West, W. R. Kanne Jr, G. K. Chapman |

The high temperature fatigue of a nickel-base superalloy: the influence of waveform variables | |

D. M. Knowles, D. K. Skelton |

The influence of dynamic testing on the J - R resistance curve behavior of medium density polyethylene | |

J. T. Dutton, D. M. Shuter, W. Geary |

The influence of lattice distortion region near the grain boundary on mechanical properties in nanocyrstalline materials | |

X. Wang, J. Wang, J. Rifkin, D. Li |

The influence of the in-plane constraint on the J resistance curves | |

A. Neimitz, J. Galkiewicz, R. Molasy |

The influence of thermal residual stresses and friction on fatigue crack growth in fibre-reinforced intermetallic matrix composites | |

G. Rauchs, P. J. Withers, P.F. Thomason |

The load carrying-ability of PMMA flexural specimens with blunt notches | |

A. J. Heidweiller |

The mechanical behaviour and fracture of thin wall iron under quasi-static and dynamic loading conditions | |

K. K. Schrems, J. A. Hawk, O. N. Dogan |

The mobility of non-planar dislocations ahead of a crack tip | |

A. H. W. Ngan |

The quasi-static fracture behavior of 7034 aluminum alloy reinforced with Sic particulates | |

T. S. Srivatsan, M. Al Hajri |

The relationship between the median/radial and lateral cracks of vickers indents in soda-lime-silica-glass | |

B. R. Whittle, R. J. Hand |

The role of constraint in mixed mode I and II ductile fracture | |

T. Swankie, D. J. Smith |

The role of deformation twins in a ductile to brittle transition and brittle fracture of ferritic steels | |

T. Smida, J. Bosansky |

The role of monazite in oxide ceramic matrix composites | |

J. Davis, D. B. Marshall, P. E. D. Morgan |

The role of particles in fatigue crack propagation of aluminium alloys | |

Z. Z. Chen, K. Tokai, T. Horimoto |

The simulations of the void initiation from the multiple seeds by molecular dynamics and the FEM | |

T. Tsuji, N. Noda |

The tunnel-crack with a slightly wavy front under shear loading | |

V. Lazarus, J.-B. Leblond |

The use of water-based epoxy resin coating for strengthening glass | |

B. R. Whittle, R. J. Hand, B. Ellis |

Thermal cycle fatigue behaviour on the dissimilar material joint | |

Y. Fukuzawa, S. Nagasawa, S. Nishida, S. Hikotani |

Thermal failure mechanism and threshold of SiC particula reinforced metal matrix composites | |

Y. C. Zhou, S. G. Long, Z. P. Duan |

Thermal failure of thermal barrier ceramic coating | |

Y. C. Zhou, T. Hashida |

Thermal fatigue dislocation structures in 316L steel: Experiments and simulations | |

C. F. Robertson, M. C. Fivel |

Thermal shock damage mechanism of fiber bonded ceramics | |

J. Kogo |

Thermal shock fracture behaviour of ceramics characterized by disc-on-rod tests | |

S. Wakayama, K. Nishino, S. Arai |

Thermal-elastic-plastic coupled analyses of dynamic crack growth | |

F. Xu, W. Guo, Y. Y. Liu |

Thickness dependence of ductile tearing in thin aluminium plates - experiments and modelling | |

T. Pardoen, F. Hachez |

Three-dimensional fatigue fracture in complex environments | |

W. Guo |

Three-dimensional mixed mode fracture on cement mortar | |

K. Zhong, K. W. Lo, T. Tamilselvan |

Time dependent stress intensity factors in a viscoelastic strip | |

M. Takashi, S. Yoneyama |

Toughening of nano-composite ceramics | |

D.-N. Fang, X. Dong, A. Soh |

Transition from ductile to cleavage fracture - effect of specimen size and mismatch | |

E. Ostby, Z. L. Zhang, C. Thaulow |

Ultimate analysis of ignalina NPP reinforced concrete containment subjected to internal pressure | |

G. Dundulis, E. Uspuras |

Ultra high temperature creep behavior for in-situ single crystal Al203/YAG oxide ceramic eutectic composites | |

Y. Harada, T. Suzuki, K. Hirano |

Unconventional domain bands near a crack tip | |

W. Yang |

Universal bridging laws for cracks in creeping media | |

B. Cox, N. Sridhar |

Use of atomic force microscopy in assessing surface damage due to fatigue | |

L. Cretegny, A. Saxena |

Use of surface-treatment life extension methods for aircraft components | |

Q. Liu, S.A. Barter, P. Baburamani, P. K. Sharp, G. Clark |

Validity requirement for the CNT small specimen testing procedure to evaluate fracture toughness | |

J. W. H Price, A. Kotousov, B. Kerezsi |

Verification of an experimental method to measure the stress-elongation law for an adhesive layer using a DCB-specimen | |

U. Stigh, T. Andersson |

Vibrations of a cross-ply ceramic matrix composite beam with matrix cracks in longitudinal and transverse layers | |

V. Birman, L. W. Byrd |

Vibrodiagnostics of Fatigue Cracks in Cylinder Shells | |

A.B. Roytman, O.A. Titova |