General Papers
| Applicability of the Cohesive Model to Engineering Problems: on Parameter Identification for Ductile Materials | |
| Ingo Scheider, Norbert Huber, Karl-Heinz Schwalbe, Rajkumar Gurunathan |
| Behavior of Cracks in Cladded Components under Consideration of Residual Stresses | |
| Jörg Hohe, Marcus Brand, Dieter Siegele |
| Cone Crack Development during Ball on the Three Balls Test | |
| Zden?k Chlup, Walter Harrer, Vladislav Kozák, Lukáš ?eho?ek |
| Delayed Cracking in a Metastable Austenitic Stainless Steel | |
| Petr Haušild, Philippe Pilvin, Michal Landa |
| Ductile-to-brittle Transition in Tensile Deformation of Particle Reinforced Metals | |
| Aude Hauert, Andreas Rossoll, Andreas Mortensen |
| Effect of Irradiation on Mechanical Properties of 15Ch2MFA Reactor Pressure Vessel Steel | |
| Št?pán Válek, Petr Haušild, Miloš Kytka |
| Effect of Particles Size and Density on Fracture Toughness of Polypropylene Particulate Composite | |
| Eva Nezbedová, Zden?k Knésl, Pavel Huta?, Zden?k Majer, Petr Veselý |
| Estimation of Apparent Fracture Toughness of Ceramic Laminates Based on Generalized Strain Energy Density Factor | |
| Luboš Náhlík, Lucie Šestáková, Pavel Huta? |
| Fabrication of Vertically Aligned Arrays of Metal Nanorods and Nanotubes by Template-Based Electrodeposition Method | |
| Marina Vorozhtsova, Kate?ina Klosová, Jaromír Hubálek |
| Failure Analysis of Brittle Elastic Notched Structures Utilising Finite Fracture Mechanics Procedures | |
| Jochen Hebel, Wilfried Becker, Dominique Leguillon, Zohar Yosibash |
| Failure of Polyamide 11 using a Damage Finite Elements Model | |
| Guillaume Boisot, Christophe Fond, Gilles Hochstetter, Lucien Laiarinandrasana |
| Fatigue Behavior and Fracture Mechanism of Al Alloy 7075-T6 under Ultrasonic Cycling Deformation | |
| Qiang Chen, Norio Kawagoishi, Gen Hashiguchi, M. Oki, Kazuhiro Kusukawa |
| Fatigue Characteristics of Bolted Joints under Transverse Vibration | |
| Shinji Hashimura |
| Fatigue Crack Growth in the Vicinity of a Grain Boundary Modelled using a Discrete Dislocation Technique | |
| Per Hansson, Solveig Melin |
| Fatigue Crack Growth of Different Aluminum Alloy 2024 | |
| Mustapha Benachour, Mohamed Benguediab, Abdelhamid Hadjoui, Nadjia Benachour, Féthi Hadjoui |
| Fatigue in PMMA: the Effect of Notches and Pores Predicted using the TCD | |
| David Hoey, Peter O'Reilly, David Taylor |
| Fracture Behavior of EUROFER´97 Steel After Thermal Ageing | |
| Hynek Hadraba, Ivo Dlouhý |
| Fracture Behaviour of Phosphorus-doped Polycrystalline Fe-2.3%V Alloy | |
| Pavel Lej?ek, Jaroslav Pokluda, Pavel Šandera, Jana Horníková, Bohumil Vlach, Monika Jenko |
| Fracture Evolution in Small Punch Tests under Constant Deflection Rate Conditions | |
| Petr Dymá?ek, Karel Mili?ka, Vojt?ch Hrubý |
| Fracture Mechanics Concepts Applied on PVDF Polymeric Material Exhibiting Porosity, Time and Temperature Dependence | |
| Lucien Laiarinandrasana, Mélanie Lafarge, Gilles Hochstetter |
| Fracture Surface Analysis of Elastomers | |
| Thomas Horst, Katrin Reincke, Gert Heinrich, Wolfgang Grellmann |
| Fracture Toughness and Fracture Surface Morphology of Cold Forging Die Steels | |
| Ryuichiro Ebara, Keisuke Takeda, Yasuo Ishibashi, Atsushi Ogura, Yasuyuki Kondo, Shinichi Hamaya |
| Fracturing of Brittle Materials in a Mixing Process with Water Jet | |
| Libor Hlavá?, Jaroslav Vašek, Irena Hlavá?ová, Petr Janda?ka, Vilém Mádr |
| High Cycle Fatigue Property and Micro Crack Behaviors in Non-combustible Magnesium Alloy | |
| Yasuo Ochi, Kiyotaka Masaki, Toshifumi Kakiuchi, Takashi Matsumura, Yoshinobu Takigawa, Kenji Higashi |
| Investigation of Branching in Polycarbonate Due to Stress Corrosion | |
| Ulf Hejman, Christina Bjerkén |
| Loading Rate Dependence of the Fracture Toughness of Polycrystalline Tungsten: Experiments and Modeling | |
| Daniel Rupp, Xiaohui Zeng, Sabine Weygand, Alexander Hartmaier |
| Mechanical Strength of Nano-Elements | |
| Takayuki Kitamura, Hiroyuki Hirakata, Takashi Sumigawa, Takahiro Shimada |
| Microradiographic Observation of the Strain Field in Vicinity of the Crack Tip | |
| Daniel Vav?ík, Ivan Jandejsek, Jan Jak?bek, Martin Jak?bek, Tomáš Holý |
| Microscopic Deformation Behavior of Lamellar Pearlite Steel | |
| Yuu Sakoda, Suguru Kashiwagi, Shigeru Hamada, Hiroshi Noguchi |
| Microstructural Interpretation of Effective Fatigue Threshold of Structural Steel | |
| Jaroslav Pokluda, Yoshiyuki Kondo, Karel Sláme?ka, Vladislav Kozák, Jana Horníková, Pavel Šandera |
| Nanoscopic Multimode Fracture Mechanisms in Anisotropic Silicon | |
| Victor Kozhushko, Peter Hess |
| On Localization Properties of Damage Models | |
| Milan Jirásek, Martin Horák |
| On the Differences Observed in the Fracture Behaviour of Centre Cracked and Centre Notched Specimens and Their Effect on Structural Integrity Assessments | |
| Sergio Cicero, Federico Gutiérrez-Solana, Anthony Horn |
| On the Micromechanisms of Fatigue Long Crack Growth under Remote Shear Loading Modes | |
| Libor Holá?, Anton Hohenwarter, Karel Sláme?ka, Reinhard Pippan, Jaroslav Pokluda |
| Plastic Limit Pressures of Circumferential Cracked Pipe Bends | |
| Seok-Pyo Hong, Jong-Hyun Kim, Yun-Jae Kim |
| Progressive Crack Propagation in Bi-material Adhesive Bonding | |
| Hamed Yazdani-Nejad, Saeid Hadidi-Moud |
| Proposal of Estimation Method for Notched Specimen Fatigue Limit of Commercially Pure Titanium | |
| Takumi Fujii, Shigeru Hamada, Hiroshi Noguchi |
| Some Feature of Fretting Fatigue Strength/Life and it's Mechanical Clarifications | |
| Toshio Hattori, Minoru Yamashita, Vu Trung Kien |
| Study of Interface Delamination by a Newly Designed Miniature Mixed Mode Bending Setup | |
| Murthy Kolluri, M.H.L Thissen, J.P.M Hoefnagels, J.A.W.van Dommelen, M.G.D Geers |
| Tensile and Fatigue Behavior of Poly-p-Phenylene Benzobisoxazole (PBO) Fibers | |
| Noriyo Horikawa, Yukihiro Nomura, Tooru Kitagawa, Yoshio Haruyama, Akiyoshi Sakaida, Takashi Imamichi |
| The Influence of Vertex Singularities on Fatigue Crack Shape | |
| Pavel Huta?, Luboš Náhlík, Zden?k Knésl, Stanislav Seitl |