General Papers
| A Mechanical Model of the Four-point End Notched Flexure (4ENF) Test Based on an Elastic-brittle Interface | |
| Stefano Bennati, Luca Taglialegne, Paolo S. Valvo |
| An Analysis of Cutting and Machining using Fracture Mechanics Concepts | |
| Gordon Williams, Yatish Patel, Bamber R. K. Blackman |
| Analysis of the Behaviour of Crack Emanating From Microvoid in Cement of Reconstructed Acetabulum | |
| Bel Abbes Bachir Bouiadjra, Smail Benbarek, Mohamed Belhouari, Tarik Achour, Boualem Serier |
| Assessment of Sub-Clad Flaw based on Finite Element Analyses | |
| Szabolcs Szávai, Róbert Beleznai, Tibor Köves |
| Behavior of Cracks in Cladded Components under Consideration of Residual Stresses | |
| Jörg Hohe, Marcus Brand, Dieter Siegele |
| Bending Strength and Failure Behaviour of Welded Borosilicate Glass | |
| Fred Veer, Cecile Giezen, Freek Bos, Christian Louter, Ton Riemslag |
| Characterization of Mechanical Properties and Residual Stresses for Ni-Co Thin Films | |
| Joong-Hyuk Ahn, Hong-Ryul Bae, Yun-Jae Kim, Jun-Hyub Park |
| Constraint Effects in Creeping Solids under Biaxial Loading | |
| Valery Shlyannikov, Nataly Boychenko |
| Constraint Evaluation and Effects on J-R Resistance Curves for Pipes under Combined Load Conditions | |
| Sebastian Cravero, Richard Bravo, Hugo Ernst |
| Damage Evolution on Different Scales | |
| Ludmila Botvina |
| Damaging Micromechanisms in a Ferritic Ductile Cast Iron | |
| Francesco Iacoviello, Ornella Di Bartolomeo, Vittorio Di Cocco, Valentino Piacente |
| Determination of a Limit State of Elastic Solids with Thin-Walled Elastic Inclusions Using the J-integral | |
| Viktor Bozhydarnyk, Iaroslav Pasternak, Heorhiy Sulym |
| Ductile Tearing Resistance of Metal Sheets | |
| Wolfgang Brocks, Paul Anuschewski, Ingo Scheider |
| Effect of Prestrain on Ductility of a X100 Pipeline Steel | |
| Jacques Besson, Yasuhiro Shinohara, Thilo Morgeneyer, Yazid Madi |
| Effect of Variuos Drilling Procedures on Fatigue Life of Rivet Holes | |
| Mohamed Elajrami, Mohamed Benguediab, Ronald Guillen |
| Effects of Tangential Strains and Shielding in Large Scale Yielding in Multi-Layered Architectures for Bearings | |
| Allan Burke-Veliz, Stavros Syngellakis, Philippa Reed |
| Elastic-Plastic Analysis of Cracks on Metal/Ceramic Joints | |
| Mohamed Belhouari, Bel Abbes Bachir Bouiadjra, Kacem Kaddouri, Kouider Madani |
| Environmental Effects upon Fatigue and Fracture Propagation of A1N Grade Railway Steel | |
| Stefano Beretta, Michele Carboni, A. Lo Conte |
| Evaluation of Hydrogen Resistance of 18Mn-18Cr Stainless Steels and its Welding Joining by Fracture Mechanics Approaches | |
| Alexander Balitskii |
| Evaluation of the Influence of Processing Conditions on the Peel Properties of PE-LD/iPB-1 Peel Systems | |
| Michael Nase, Beate Langer, Hans Joachim Baumann, Wolfgang Grellmann |
| Evaluation of Toughness Anisotropy on Doped PZT Ceramics as a Function of Load and Temperature | |
| Raúl Bermejo, Hannes Grünbichler, Josef Kreith, Robert Danzer |
| Experimental Determination of J-integral at Elevated Temperatures | |
| Ljubica Milovic, Milorad Zrilic, Stojan Sedmak, Aleksandar Sedmak, Meri Burzic |
| Failure Analysis of Brittle Elastic Notched Structures Utilising Finite Fracture Mechanics Procedures | |
| Jochen Hebel, Wilfried Becker, Dominique Leguillon, Zohar Yosibash |
| Failure of Hydrided Zircaloy-4 Fuel Cladding Tubes under RIA Loading Conditions | |
| Matthieu Le Saux, Jacques Besson, Sébastien Carassou, Christophe Poussard, Xavier Averty |
| Failure of Polyamide 11 using a Damage Finite Elements Model | |
| Guillaume Boisot, Christophe Fond, Gilles Hochstetter, Lucien Laiarinandrasana |
| Fatigue Behavior of High-chromium Alloyed Cold Work Tool Steel in the Gigacycle Regime | |
| Christian Sohar, Agnieszka Betzwar-Kotas, Christian Gierl, Brigitte Weiss, Herbert Danninger |
| Fatigue Crack Growth of Different Aluminum Alloy 2024 | |
| Mustapha Benachour, Mohamed Benguediab, Abdelhamid Hadjoui, Nadjia Benachour, Féthi Hadjoui |
| Fatigue Life Analysis of Damaged Structural Component using Strain Energy Density Method | |
| Stevan Maksimovic, Slobodanka Boljanovic, Vladimir Orovic, Milorad Komnenovic |
| Fatigue Reinforcement in Natural Rubber Containing Carbon Black Fillers | |
| Jean-Yves Rouvière, Jacques Besson, Sabine Cantournet |
| Fatigue Strength for Shallow Defects under Torsion | |
| Stefano Beretta, Khaydar Valiullin |
| Fracture Behaviour and Defect Assessment of Brazed Steel Joints | |
| Christian Leinenbach, Hans-Jakob Schindler, Tanya Baser, Niklaus Rüttimann, Konrad Wegener |
| Gigacycle Fatigue of Metallic Aircraft Components | |
| Claude Bathias, Paul C. Paris |
| Identifying Cracks in Gears Using Wavelet Analysis | |
| Aleš Belšak, Jože Flašker |
| Incubation Time Criteria for Fracture and Structural Transformations | |
| Yuri Petrov, Vladimir Bratov |
| Influence of Low-angle Grain Boundaries on Short Fatigue Crack Growth Studied by a Discrete Dislocation Method | |
| Christina Bjerkén, Solveig Melin |
| Investigation of Branching in Polycarbonate Due to Stress Corrosion | |
| Ulf Hejman, Christina Bjerkén |
| Localised Effects in Sandwich Structures – Load Response, Failure and Fatigue | |
| Ole T. Thomsen, Elena Bozhevolnaya, Anders Lyckegaard |
| Microstructure Based Upper Shelf Charpy Toughness Prediction of HSLA Steels | |
| Florian Thönnessen, Sebastian Münstermann, Wolfgang Bleck, Philippe Thibaux, Martin Liebeherr, Thomas Schramm |
| Microstructure Evolution in base Metal and Welded Joint of Grade 91 Martensitic Steels after Creep at 500-600°C | |
| Florian Vivier, Clara Panait, Anne-Françoise Gourgues-Lorenzon, Jacques Besson |
| On the Development of Key Curve Methods for the Determination of Dynamic Crack Resistance Curves of Ductile Cast Iron (DCI) | |
| Wolfram Baer, Dieter Bösel, Arno Eberle, Dietmar Klingbeil |
| Residual Stress and Reduction of the Stress Concentration Factor in Rivet Holes of 2024–T3 Aluminium Alloy | |
| Mohamed Elajrami, Mohamed Benguediab, Ronald Guillen |
| Residual Stress Effect on Fatigue Life of a Cold-worked Rivet Hole | |
| Mohamed Elajrami, Mohamed Benguediab, Ronald Guillen |
| RMS SIF Weight Functions for Surface Cracks: an Illustration of Capabilities and Limitations | |
| Amirebrahim Chahardehi, Feargal Brennan |
| Size Effect on Strength and Lifetime Distributions of Quasibrittle Structures Implied by Interatomic Bond Break Activation | |
| Zdenek P. Bazant, Jia-Liang Le, Martin Z. Bazant |
| Surface Damage Evolution Of Graded Materials | |
| Michael Besel, Angelika Brueckner-Foit, Alexander Gruening, Jens Mannel |
| Temperature Dependence of Beremin-Model Parameters for RPV Steel | |
| Gyöngyvér B. Lenkey, Róbert Beleznai |
| The Finite Element Model to Simulate Dynamic Fracture of Initially Intact Media, Dynamic Crack Initiation, Propagation and Arrest | |
| Vladimir Bratov, Yuri Petrov, Alexander Utkin |
| The Specific of the Creep Process in Hydrogen of the Degraded in Service 2.25Cr-Mo Steel | |
| Andzej Zagórski, Oleksandra Student, Leontiy Babiy, Hryhoriy Nykyforchyn, Krzysztof Jan Kurzyd?owski |
| Theoretical and Experimental Study of Nonequilibrium Structural-Scaling Transitions in Metals | |
| Vladimir Oborin, Yuriy Bayandin, Sergey Permyakov, Vladimir Leontiev, Oleg Naimark |