General Papers
| Mesoscopic simulations of damage accumulation under fatigue loading | |
| A Brückner-Foit, X. Huang, Y. Motoyashiki |
| Redistribution of stresses from manufacturing operations during service loads and the effect on fatigue life of built-up structures | |
| L. Josefson, J. Ringsberg |
| Recent developments in the understanding of fretting fatigue | |
| D. Nowell |
| Identification of fatigue damaging events using a wavelet-based particle editing algorithm | |
| S. Abdullah, J. A. Giacomin, J. R. Yate |
| Structural integrity assessment of spherical storage tanks | |
| G. Adziev, A. Sedmak, T. Adziev, S. Sedmak |
| In-plane impact forces and behaviour of naturally-bedded slate material during impact splitting tests | |
| M. R. Alam, K. Munaswamy, A. S. J. Swamidas |
| An in-situ SEM study of crack propagation | |
| M. Andersson, C. Persson, S. Melin |
| Meso-mechanical modelling of thin adhesive layers | |
| T. Andersson, K. Salomonsson |
| Effects of the length of the damage zone on the effective constitutive properties of an adhesive layer loaded in peel | |
| T. Andersson,, A. Biel |
| A new methodology to guarantee the structural integrity of ceramic components using in-situ crack-healing ability | |
| K. Ando, K. Furusawa, K. Takahashi, S. I Sato |
| Self-crack-healing behavior and fracture strength of Al2O3/SiC composites at the high temperature | |
| K. Ando, S. Kodama, M. Yokouchi, S.-L. Kee, W. Nakao, K. Takahashi |
| Different approaches to depict fatigue of bituminous materials | |
| I Artamendi, H. Khalid |
| Estimation of critical frontal process zone size in ceramics | |
| H. Awaji, C.-H. Chen, N. Kishi, S.-M. Choi |
| Fracture initiation angle in the centrally cracked circular disk specimen | |
| M. R. Ayatollahi,, M. R. M. Aliha |
| J-T Characterization of elastic-plastic stress fields in a mode II crack specimen | |
| M. R. Ayatollahi |
| Numerical analysis of the performances of the bonded composite patch for reducing stress concentration and repairing cracks at notch | |
| B. Bachir Bouiadjra, B. Serier, D. Ouinas, B. Boutabout |
| Dynamic mechanical properties of ductile cast iron materials for thick walled components | |
| W. Baer, R. Häcker, J. Börrnert |
| Numerical analysis of cracked rolling contact components | |
| M. Beghini, L. Bertini, V. Fontanari |
| The role of bi-modal and lamellar microstructures of TI-6AL-4V on the behavior of fatigue cracks emanating from edge-notches | |
| M. Benedetti, V. Fontanari |
| Multiaxial fatigue and defect assessment of truck stabilizers | |
| S. Beretta, H. Desimone, A. Poli |
| Steady-state measurement of the interface fracture resistance in wafer bonding | |
| Y. Bertholet, F. Iker, X. X. Zhang, J .P. Raskin, T. Pardoen |
| Mode I and mixed-mode I/II crack tip fields unified by constraint | |
| B. Bezensek, J. W. Hancock |
| Influence of varying load spectra on short crack growth modelled by a dislocation technique | |
| C. Bjerkén,, S. Melin |
| Conventional vs closure free crack growth in nodular iron | |
| A. Bjoerkblad |
| Prediction of the DT41J and DKIc,100 shifts due to irradiation for an A508 pressure vessel steel based on local approach to fracture | |
| C. Bouchet, B. Tanguy, J. Besson, S. Bugat |
| Optimising energy input for fracture by analysis of the energy required to initate dynamaic mode I crack growth | |
| V. Bratov, Y. Petrov |
| Modelling and experimental verification of delamination crack growth in an air-plasma-sprayed thermal barrier coating | |
| H. Brodin, M. Jinnestrand, M. Jinnestrand, S. Sjöström, S. Sjöström |
| Assessment of load history effects on fracture | |
| P. J. Budden, D. C. Connors |
| The fatigue growth of three-dimensional fretting cracks | |
| A. Cadario, B. Alfredsson |
| Structural mechanics applied to mooring components design | |
| A. F. Camarão, M. V. Pereira, F. A. Darwish, S. H. Motta |
| Fatigue behaviour of clinched joints | |
| M. Carboni, S. Beretta, M. Monno |
| A fragmentation approach for concrete in compression | |
| Al. Carpinteri,, G. Ferro |
| Influence of the interface bonding strength on brittle crack propagation in bi-material structural components | |
| Al. Carpinteri, M. Paggi |
| Fatigue behaviour of fiber-reinforced concrete beams | |
| An. Carpinteri, A. Spagnoli, S. Vantadori |
| Modelling of the mechanical behaviour and fracture processes of the PVDF | |
| M. Challier, J. Besson, S. Cantournet, L. Laiarinandrasana, R. Piques, R. G. Hochstetter, S. Pignoc |
| 3D finite element study of damage evolution in a particle composite | |
| L. Mishnaevsky |
| A cohesive zone model with Barenblatt surface energy :theoretical considerations and numerical simulations | |
| J. Laverne, E. Lorentz, J.-J. Marigo. |
| A critical distance approach applied to microscopic 316L biomedical specimens under fatigue loading | |
| S. A. Wiersma, D. Taylor. |
| A fracture mechanics approach for the crack growth in welded joints with reference to bs 7910 | |
| P. Darcis, D. Santarosa, N. Recho, T. Lassen. |
| A fragmentation approach for concrete in compression | |
| Al. Carpinteri, G. Ferro |
| A new approach for crack growth life of an elastomeric material | |
| F. Lacroix, A. Tougut, N. R. Neelakantan and N. Ranganathan. |
| A new methodology to guarantee the structural integrity of ceramic components using in-situ crack-healing ability | |
| K. Ando, K. Furusawa, K. Takahashi, S. I Sato. |
| A numerical and experimental investigation into the generation of residual stress in fracture specimens using local compression | |
| A. H. Mahmoudi, S. Hadidi-Moud, C. E. Truman, D. J. Smith. |
| A statistical investigation of fatigue behaviour according to Weibull's weakest link theory | |
| A. Wormsen, G. Haerkegaard. |
| A study on crack propagation in heterogeneous elastic-plastic solids | |
| K. Srinivasan, T. Siegmund, O. Kolednik. |
| A two scale damage model for thermomechanical high cycle fatigue failure | |
| M. Seyedi, R. Desmorat, J.-P. Sermage. |
| Adhesion measures of elasto-plastic thin film via buckle-driven delamination | |
| Y. Shouwen, L. Qunyang. |
| Advances in the application of non-local damage models in the simulation of ductile crack-extension | |
| D. Klingbeil, B. Svendsen, F. Reusch. |
| An experimental and analytical study of crack growth retardation in a structural steel | |
| F. Darwish, M. Pereira, M. Lopes, A. Camarão, S. Motta. |
| An in-situ SEM study of crack propagation | |
| M. Andersson, C. Persson, S. Melin. |
| An instability analysis for a crack growth situation based on the common format | |
| J.R. Donoso, J. D. Landes. |
| Application of a predictive model for brittle fracture in a high strength steel and its weld | |
| R. Rodríguez-Martín, I. Ocaña, A. Martín-Meizoso. |
| Application of the local approach to predict brittle fracture following local compression | |
| A. Mirzaee Sisan, S. Hadidi-Moud, C. E. Truman, D. J. Smith. |
| Applications of the theory of critical distances to the prediction of brittle fracture in metals and non-metals | |
| D. Taylor. |
| Assesment of the ductile to brittle transition curve for C-Mn ferritic steels based upon a small data set | |
| R. Moskovic and P. Flewitt. |
| Assessment of ductile fracture resistance of structural steel using a simple numerical approach | |
| L. Wang, G. Shatil. |
| Assessment of load history effects on fracture | |
| P. J. Budden, D. C. Connors. |
| Automatic 3D crack propagation in complex welded structures | |
| J. Martinsson. |
| Behaviour of short fatigue cracks in a naval steel | |
| A. El Malki Alaoui, D. Thevenet, A. Zeghloul. |
| Brittle fracture of polycrystals-development of a new three-dimensional model | |
| G.. Smith, A. Crocker, P. Flewitt. |
| Cellular automata finite element (CAFE) modelling of transitional ductile-brittle fracture in steel | |
| A. Shterenlikht, I. C. Howard. |
| Comparison of fatigue crack growth concepts with respect to interaction effects | |
| M. Sander. |
| Constraint effects in steady -state fracture of adhesively bonded joints | |
| T. Pardoen, T. Ferracin, C. M. Landi. and F. Delannay. |
| Conventional vs closure free crack growth in nodular iron | |
| A. Bjoerkblad. |
| Crack bridging and trapping in borosilicate matrix composites with distributed metal particles | |
| M. Kotoul, I. Dlouhy, T. Vyslouzil. |
| Crack problems in single crystals of hexagonal structure | |
| C.-R. Chiang. |
| Crack propagation analyses with CTOA and cohesive model: comparison and experimental validation | |
| I. Scheider, M. Schödel, W. Schönfeld |
| Crack tip stress fields for anisotropic materials with cubic symmetry | |
| D .E. Lempidaki, N. P. O'Dowd, E. P. Busso. |
| Crack-tip shielding and anti-shielding by a bimaterial interface | |
| O. Kolednik, J. Predan, G.. X. Shan, N.K. Simha, F. D. ischer. |
| Creep failure model of a 9Cr-1MoNbV (P91) steel integrating multiple deformation and damage mechanisms | |
| V. Gaffard, J. Besson, A. F. Gourgues. |
| Criteria for mixed-mode fracture prediction in ductile material | |
| N. Recho, S. Ma, X. B. Zhang. |
| Damage process in Al-alloy specimens: XRDD experiment and numerical simulation | |
| J. Korouš, D. Vavrík, J. Jakobek and S. Pospíšil. |
| Determination of critical tearing energy of tire rubber | |
| E. E. Gdoutos, P. M. Schubel, I. M. Daniel. |
| Determination of local approach parameters on the basis of the 'eurocurve' fracture toughness round-robin results | |
| A. Laukkanen, K. Wallin. |
| Development of a laboratory test technique for direct estimate of crack tip opening angle | |
| S. H. Hashemi, R. Gay, I. C. Howard, R. M. Andrews, J. R. Yates. |
| Different approaches to depict fatigue of bituminous materials | |
| I. Artamendi, H. Khalid. |
| Dislocation modelling of short fatigue crack growth through alternating slip | |
| P. Hansson, S. Melin. |
| Dynamic mechanical properties of ductile cast iron materials for thick walled components | |
| W. Baer, R. Häcker, J. Börrnert. |
| Effect of local plastic stretch om total fatigue life evaluation | |
| G. S. Wang. |
| Effect of local wall thinning on fracture behavior of straight pipe | |
| M. Ono, K.-W. Nam, K. Takahashi, K. Ando. |
| Effect of mean stress on short crack growth in fatigued 316L stainless steel | |
| K. Obrtlik, J. Man, J. Polak. |
| Effect of spray-forming on the fracture properties of high-chromium white iron | |
| M. Janssen, D. N. Hanlon, I. C. Stone, E. R. Peekstok, M. F. Mendes de Leon. |
| Effects of compression precracking on subsequent crack growth | |
| M. A. James, S. C. Forth, W. M. Johnston, J. A. Newman and R. A. Everett. |
| Effects of hydrogen charge in cyclic-stress and fatigue behaviour | |
| H. Uyama, Y. Mine, Y. Murakami. |
| Effects of hydrogen on fatigue crack growth behaviour, ductility loss of austenitic stainless steels | |
| T. Kanazaki, Y. Mine, Y. Fukushima, Y. Murakami. |
| Effects of the length of the damage zone on the effective constitutive properties of an adhesive layer loaded in peel | |
| T. Andersson, A. Biel. |
| Efficient 2-parameter fracture assessments of cracked shell structures | |
| B. Skallerud, K. R. Jayadevan, C. Thaulow, E. Berg and K. Holthe. |
| Elastic-plastic analysis of cracks in pipe | |
| K. Kaddouri, B. Bachir Bouaidjra, M. Belhouari, K. Madani. |
| Estimation of critical frontal process zone size in ceramics | |
| H. Awaji, C.-H. Chen |
| Estimation of fatigue life improvement for ultrasonic impact treated welded joints | |
| V.-M. Lihavainen, G. Marquis. |
| Evaluation of higher order weight functions by the finite element method | |
| Q. Z. Xiao, B. L. Karihaloo. |
| Evaluation of microcracks in microelectronic composites | |
| B. Michel and J. Keller. |
| Experimental investigations of size effect on fracture toughness of metallic foils | |
| Y.-L. Kang, Z.-F. Zhang, H.-W. Wang, Q.-H. Qin. |
| Experimental methods for thermomechanical fatigue in gas turbine materials | |
| L. Jacobsson, C. Persson, S. Melin. |
| Experimental techniques for aircraft fuselage structures containing damage | |
| P. E. O'Donoghue, J. Ju. |
| Extrapolation of load histories and spectra | |
| P. Johannesson. |
| Failure analysis of biaxial braided composites under fatigue loading | |
| J. S. Tate, A. D. Kelkar, V. A. Kelkar. |
| Failure criteria for transparent acrylic adhesive joints under static, fatigue and creep loading | |
| F. A. Veer, J. choenwälder, J. Zuidema, C. van Kranenburg. |
| Far field stress asymptotic behaviour in creep crack growth problems for damaged materials | |
| L. V. Stepanova, M. E. Phedina. |
| Fatigue behaviour of an aluminium alloy matrix composite | |
| A. Garcia Romero, M. Anglada. and A. M. Irisarri. |
| Fatigue behaviour of clinched joints | |
| M. Carboni, S. Beretta, M. Monno. |
| Fatigue behaviour of fiber-reinforced concrete beams | |
| An. Carpinteri, A. Spagnoli, S. Vantadori. |
| Fatigue crack growth in 18g2a steel under mixed mode I+III loading | |
| E. Macha, D. Rozumek. |
| Fatigue crack growth thresholds in D6AC steel | |
| S. C. Forth, M. A. James, W. M. Johnston. |
| Fatigue crack paths and residual stresses in cold formed rectangular structural tubes | |
| S. Heinilä, T. Björk, G. Marquis, M. Bäckström, R. Ilvonen. |
| Fatigue damage assesment using thermoelastic stress analysis | |
| F. A. Díaz, E.A. Patterson, J. R. Yates. |
| Fatigue life of two steels under combined bending with torsion- an approach including non-local strain energy density parameter | |
| T. Lagoda, E. Macha, M. Kohut. |
| Fatigue of welded aluminium T-joints | |
| T. Mann, B. W. Tveiten, G. Haerkegaard. |
| FEM-analysis of cracks in piezoelectric structures under dynamic electromechanical loading | |
| M. Enderlein. |
| Finite deformation analysis of cyclic elasto-plastic crack-tip fields in a strain-hardening material | |
| J. Toribio and V. Kharin. |
| Finite element modelling of multiple cohesive discrete crack propagation in reinforced concrete beams (I): the model and its computer implementation | |
| Z. Yang, J. Chen. |
| Finite element modelling of multiple cohesive discrete crack propagation in reinforced concrete beams (II): a case study | |
| Z. Yang, J. Chen. |
| Fracture initiation angle in the centrally cracked circular disk specimen | |
| M. R. Ayatollahi, M. R. M. Aliha. |
| Fracture mechanics for composite bulk property testing in order to avoid fracture | |
| L. N. Melin, K. B. Petterson. and J. M. Neumeister. |
| Fracture mechanics for membranes | |
| C. Li, R. Espinosa, P. Ståhle. |
| Fracture resistance degradation of hybrid galss matrix composites | |
| I. Dlouhy, Z. Chlup, A. R. Boccaccini. |
| Fracture toughness of structural components. influence of constraints | |
| A. Neimitz and J. Galkiewicz. |
| Fretting fatigue under varying loading below the fretting fatigue limit | |
| Y. Kondo, C. Sakae, M. Kubota, H. Kitahara. |
| High cycle fatigue crack paths in specimens having different stress concentrations | |
| G. Meneghetti, L. Susmel, R. Tovo. |
| High cycle fatigue of an orthorhombic Ti-22Al-25Nb intermetallic alloy | |
| S. Q Li, Y. J. Cheng, J. W. Zhang, X. B. Liang. |
| Hydrogen diffusion near a crack tip after cyclic loading in a strain hardening material | |
| J. Toribio, V. Kharin. |
| Hydrogen-plasticity interactions in pearlitic steel: a fractographic and numerical study | |
| J. Toribio, V. Kharin. |
| Identification and validation of ductile damage parameters by the small punch test | |
| M. Kuna, M. Abendroth. |
| Identification of fatigue damaging events using a wavelet-based particle editing algorithm | |
| S. Abdullah, J. A. Giacomin, J. R. Yate. |
| Impact shear loading of bi-material strips, a comparison of numerical and global energy analysis | |
| J. G. Williams, A. Ivankovic, V. Stylianou Tropsa. |
| In-plane impact forces and behaviour of naturally-bedded slate material during impact splitting tests | |
| M. R. Alam, K. Munaswamy, A. S. J. Swamidas |
| Influence of matrix microstructure and test conditions on the pseudoductile failure of CVI-CFC | |
| R. Ermel |
| Influence of measurement method on fatigue crack growth threshold | |
| C. van Kranenburg, W. He, J. Zuidema, F. Veer. |
| Influence of microstructural parameters on the fatigue crack initiation in a two phase - metastable titanium alloy | |
| A. Lenain, P. J. Jacques. |
| Influence of shot peening on chromium-plated AISI 4340 steel fatigue strength | |
| H. J. C. Voorwald, M. Y. P. Costa, M. P. Silva, L. W. Pigatin, B. M. F. Marques. |
| Influence of the interface bonding strength on brittle crack propagation in bi-material structural components | |
| Al. Carpinteri, M. Paggi. |
| Influence of varying load spectra on short crack growth modelled by a dislocation technique | |
| C. Bjerkén, S. Melin. |
| Inhomogeneity check of the 'Euro' fracture toughness reference data set | |
| K. Wallin. |
| J-T Characterization of elastic-plastic stress fields in a mode II crack specimen | |
| K. Madani, B. Bachir Bouiadjra, M. Belhouar, B. Serier. |
| Limit equilibrium of a finite cylindrical shell with surface crack | |
| M. R. Ayatollahi. |
| Limitation of unloading compliance method to correlate with physical crack size during single specimen J-integral testing | |
| R. M. Kushnir, M. M. Nykolyshyn, M. Yo. Rostun. |
| Linking microstructure and high temperature ductility in aluminium alloys AA6xxx | |
| R. V. Prakash. |
| Mean value influence in fatigue - on the rational choice of model complexity | |
| D. Lassance, M. Schmitz, F. Delannay, T. Pardoen. |
| Meso-mechanical modelling of thin adhesive layers | |
| T. Svensson, P. Johannesson, J. de Maré. |
| Mesoscopic simulations of damage accumulation under fatigue loading | |
| T. Andersson, K. Salomonsson |
| Micro-mechanical damage modelling of notched bar testing of modern pipe steel | |
| A. Brückner-Foit, X. Huang, Y. Motoyashiki |
| Micromechanics-based modelling of ductile tearing in thin plates | |
| S. H. Hashemi, I. C. Howard, J. R. Yates, R. M. Andrews. |
| Micromechanisms of cleavage fracture in HAZ of C-Mn steel welds | |
| F. Hachez, A. G. Atkins, R. H. Dodds, T. Pardoen. |
| Mixed-mode fibre-matrix debonding in transverse cyclic loading of unidirectional composite plies | |
| C. Moya-Gutiérrez, A. Martín-Meizoso, I. Ocaña-Arizcorreta. |
| Mode I and mixed-mode I/II crack tip fields unified by constraint | |
| K. Gamstedt, E. Correa. |
| Modeling of fracture of structural components with zones of corrosion wear under thermomechanical loading | |
| B. Bezensek, J. W. Hancock. |
| Modelling and experimental verification of delamination crack growth in an air-plasma-sprayed thermal barrier coating | |
| R. V. Goldstein, Y. V. Zhitnikov, I. V. Kadochnikov. |
| Modelling drop impact and fracture of fluid-filled plastic containers | |
| H. Brodin, M. Jinnestrand, S. Sjöström. |
| Modelling growth of small cracks in a polycrystal | |
| A. Karac, A. Ivankovic. |
| Modelling of cohesive stresses in a plastic zone around the crack tips in a a strain-hardening material | |
| R. Lillbacka, E. Johnson, M. Ekh, K. Runesson. |
| Modelling of the mechanical behaviour and fracture processes of the PVDF | |
| D. Pustaic, B. Štok. |
| Multiscale simulation of the competition between intergranular and transgranular fracture in 7000 alloys | |
| S. Beretta, H. Desimone, A. Poli. |
| Non-propagating cracks under in-phase mode I and II loadings | |
| F. Scheyvaerts, P. R. Onck, Y. Bréchet, T. Pardoen |
| Numerical analysis of cracked rolling contact components | |
| L. Susmel, D. Taylor. |
| Numerical analysis of the performances of the bonded composite patch for reducing stress concentration and repairing cracks at notch | |
| M. Beghini, L. Bertini, V. Fontanari. |
| Numerical investigations of the fatigue crack growth under service loading | |
| B. Bachir Bouiadjra, B. Serier, D. Ouinas, B. Boutabout. |
| On the Paris exponent and crack closure effects of Alporas aluminum foam | |
| H. A. Richard, M. Sander. |
| On the relationship between microstructure and fracture toughness in trip-assisted multiphase steels | |
| N. Geerlofs, J. Zuidema, J. Sietsma. |
| On the sharp bend in the S-N curve of the AZ31 extruded magnesium alloy | |
| G. Lacroix, Q. Furnémont, T. Pardoen, P. J. Jacques. |
| On the study of the stress ratio effects on fatigue crack propagation threshold in the time domain | |
| Z. Nan, S. Ishihara, T. Goshima, R. Nakannishi. |
| On the use of numerical crack growth simulation techniques to evaluate different methods for the estimation of crack resistance curves | |
| J. Z. Zhang. |
| Optimising energy input for fracture by analysis of the energy required to initate dynamaic mode I crack growth | |
| U. Muehlich, J. R. Donoso, J. D. Landes. |
| Phenomenological assessment of temper embrittlement at 21/4Cr-1Mo steel | |
| V. Bratov, Y. Petrov. |
| Prediction of the DT41J and DKIc,100 shifts due to irradiation for an A508 pressure vessel steel based on local approach to fracture | |
| P. Zumpano |
| Quantitative evaluation of hydrogen induced cold cracking in welded joints | |
| M. T. Tilbrook, R. J. Moon and M. Hoffman |
| Recent developments in the understanding of fretting fatigue | |
| E. Ranatowski. |
| Redistribution of stresses from manufacturing operations during service loads and the effect on fatigue life of built-up structures | |
| D. Nowell |
| Reduction of mode I fatgue crack growth rate after a mode II load | |
| L. Josefson, J. Ringsberg |
| Self-crack-healing behavior and fracture strength of Al2O3/SiC composites at the high temperature | |
| O.-S. Lee, D.-H. Kim. |
| Selfsimilar solutions for stress driven material dissolution | |
| K. Ando, S. Kodama, M. Yokouchi, S.-L. Kee, W. Nakao, K. Takahashi. |
| Short crack propagation in Duplex steel - experimental characterization and modelling | |
| P. Ståhle and A. P. Jivkov. |
| Simulation of fatigue damage in solder joints using cohesive zones | |
| O. Düeber, B. Kuenkler, U. Krupp, H.-J. Christ, C.-P. Fritzen. |
| Simulation of fracture in bonded joints with a cohesive model | |
| P. J. G. Schreurs, A. Abdul-Baqi, M. G .D. Geers. |
| Simulations of crack meandering and crack branching in intergranular creep fracture | |
| A. Pirondi. |
| Specific aspects on crack advance during J-test method for structural materials at cryogenic temperatures | |
| Y. Kaim, P R. Onck, E. van der Giessen. |
| Specimen geometry effects on 316L(N) creep crack growth analyses | |
| K. Weiss, A. Nyilas |
| Standing contact fatigue with line loading | |
| L. Laiarinandrasana and M. R. Kabiri. |
| Steady state tearing in thin aluminium sheets under uniaxial tension | |
| J. Dahlberg, B. Alfredsson. |
| Steady-state measurement of the interface fracture resistance in wafer bonding | |
| V. P. Naumenko and, Y..D. Skrypnyk. |
| Strain energy density parameter approach to the non-local parameter of fatigue damage | |
| Y. Bertholet, F. Iker, X. X. Zhang, J .P. Raskin, T. Pardoen. |
| Strength and deformation of a thin polycrystalline film on a substrate: dislocation density analysis | |
| M. Kohut, T. Lagoda. |
| Structural integrity assessment of spherical storage tanks | |
| L. Mishnaevsky |
| Structural mechanics applied to mooring components design | |
| G. Adziev, A. Sedmak, T. Adziev, S. Sedmak |
| Study of faitgue crack initiationin rough surfaces using the finite element method and measured surface topography | |
| A. F. Camarão, M. V. Pereira, F. A. Darwish, S. H. Motta. |
| Susceptibility to stress corrosion in transport oil pipeline steels exposed to long time service conditions | |
| S. Kyrre Aas, B. Skallerud, B. W Tveiten, B. Holme. |
| The change of the local crack driving force in an under-match welded joint | |
| K.-J. Kurzydlowski, H. Nykyforchyn, E. Lunarska, O. Tsyrulnyk, L. Ciupinski |
| The creep fatigue interaction in solid paper | |
| J. Predan, N. Gubelja, O. Kolednik, F. D. Fischer. |
| The effect of the load bearing area on the high cycle fatigue limit in high density sintered low alloyed steels | |
| F. A. Veer, J. Schoenwälder, A. J. Heidweiller, N. B. Kuipers. |
| The fatigue growth of three-dimensional fretting cracks | |
| C. Xu, G. Khatibi, B. Weiss, H. Danninger. |
| The fracture toughness of polytetrafluoroethylene | |
| A. Cadario and B. Alfredsson. |
| The regularization behaviour of a nonlocal Gurson-type model | |
| J. A. Joyce, P. J. Joyce. |
| The transferability of micro-mechanical damage parameters in modern line pipe steel | |
| M. Benedetti, V. Fontanari. |
| The use of asymptotic solutions in fretting fatigue | |
| S. H. Hashemi, I. C. Howard, J. R. Yates, R. M. Andrews. |
| The use of cohesive zone model to simulate the blister test on an elastic-plastic film bonded to a rigid substrate | |
| D. A. Hills, D. Dini. |
| Theory and applications of weight functions for cracks in piezo-electrics | |
| K. Hbaieb, Y.. W. Zhang. |
| Thin film delamination | |
| A. Ricoeur. |
| Three dimensional finite element calculations of crack tip plastic zones and KIc specimen size requirements | |
| H. Myhre Jensen |
| Upper shelf fracture toughness of as welded manual metal arc weld metal | |
| D. Fernández Zúñiga, J. F. Kalthoff, A. Fernández Canteli, J. Grasa, M. Doblaré. |