#### General Papers

A bifocal arrangement for reflected caustics for the investigation of the domain of dominance of a symptotic elastic fields in dynamic fracture | |

S. Krishnaswamy, A. Rosakis, C. Ravichandran |

A new nonlinear line-spring model for elastic-plastic analysis of surface cracks | |

L. Yinchu, C. Changqing |

A numerical study of crack arrest in elastic-plastic materials | |

S. Ostlund |

A probabilistic approach to crack instability | |

A. Chudnovsky, B. Kunin |

A unified fracture theory: the dual-parameter fracture-criterion | |

Z. Too, H. W. Liu |

An analysis of dynamic crack initiation and growth in elastic-viscoplastic solids | |

G. Ravichandran |

Analysis of cracked plates and shells and its application in engineering | |

C.T. Liu |

Analysis of radial cracks emanating from an arbitrarily loaded circular hole | |

X.R. Wu, X.Y. Huang, W. Zhoo |

Application of fracture mechanics to strain localization mechanism | |

H. Horil, S. Zihai |

Application of Moire photography to the study of dynamic fracture | |

J M . Huntley, J.E. Field |

Application of strain energy density and maximum circumferential stress criteria to dynamic crack curving | |

A. Shukla. R. Chona, C. Zhu |

Application of the vectorial J-integral to adhesive bonds | |

Z.W. Chenand, R. Adams |

Applications of EPFM to welding: current trends | |

L.A. de Vedia |

Basic principle of dynamic fracture toughness evaluation by computer aided instrumented impact testing (CAI) system | |

T. Kobayashi, T. Kazino, M. Kamimura, H. Ikawa |

On mixed-mode plane stress ductile fracture | |

Y.W. Mai, B. Cotterell |

Behavior of initiation and growth of creep and creep-fatigue small cracks in austenitic stainless steels | |

R. Ohtani, T. Kitamura |

Changing deformation fields surrounding a growing ductile crack | |

F.P. Chiang. B.C. Liu, S. Li |

Compression-induced ductile flow of brittle materials and brittle fracturing of ductile materials | |

S. Nemat-Nasser |

Correcting J-R curve mismatch twist with normalization analysis | |

J. Landes, R. Herrera |

Correlation of creep-fatigue crack growth rates using crack-tip parameters | |

B. Gieseke, A. Saxena |

Crack-tip field at steady crack growth and vanishing linear strain-hardening | |

P. Stahle |

Determination of stress intensity factor in a crack-stiffened panel under equibiaxial loading | |

R. Selhuraman, S.K. Maiti |

Discussion on the singular character of the stress components at the crack tips in static and dynamic fracture | |

F. Jiashen |

Dislocation dynamics and crack tip plasticity at the brittle-ductile transition | |

P.B. Hirsch, S.G. Roberts, I. Samuels, P.D. Warren |

Ductile crack extension in compact specimens at limit load | |

J. J. Hu, J.C. Cheng, P. Albrecht, J. Joyce |

Ductile fracture resistance of pipeline steels | |

A. Fontaine |

Dynamic fracture toughness measurement methods for brittle and ductile materials | |

I . Duffy, C.F. Shih |

Dynamic stress concentration in annular disks under transient loading | |

M. Maass, J. Wauer |

Dynamic stress intensity factors of brittle materials | |

A.S. Kobayashi, K.H. Yang |

Dynamic-viscoplastic experiments with analyses of rapid crack propagation and arrest | |

M.F. Kanninen, S.J. Hudakir, R.J. Dexter, P.E. O' Donoghue, H. Couque, S. Roy |

Effect of materials structure on the non-linear fracture parameters of aggregate concrete | |

V.C. Li, J. Huang |

Effect of microstructure and loading rate on the fracture behavior of titanium-10V-2Fe-3Al | |

J .H. Giovanola, R.W. Klopp, D.A. Shockey, A.T. Werner |

Effect of specimen geometry on J-resistance curves in near small-scale yielding conditions | |

G. Rousselier, G. Devesa, M. Bethmont |

Effect of specimen size and notch root radius on dynamic fracture toughness of heavy wall ductile cast iron | |

H. Yamamoto, T. Kobayashi |

Effects of microstructure and stress-state on ductile fracture in metallic alloys | |

J. F. Knott |

Effects of rate-sensitivity in dynamically loaded 3D fracture specimen | |

T. Nakamura |

Elastic-plastic fracture mechanics analysis of SCC in a low strength steel | |

F. Sarioglu, M. Doruk |

Elastic-plastic stress analysis of semi-elliptical cracks in a tubular welded T-joint | |

Z.Z. Du, J. W. Hancock |

Elastoplastic fracture parameters for a joint containing a transverse crack in the longitudinal overmatched weld | |

C. Bingsen, M. Weidian |

Elastoplastic stress-strain analysis for a pure bending notched specimen of power hardening material and its application | |

M. Weidian, H. Chunxiao, X. Xiang Xing, Z. Wei, S. Yi, C. Qigong |

Equilibrium criterion for a nonlinear elastic slited body | |

L.K. Chau |

Evaluation of crack-arrest toughness through dynamic fracture analysis of large vessel tests | |

C.E. Pugh, B.R. Bass, R.H. Bryan, I. Keeney-Walker |

Evaluation of the asymptotic field at interfaces of ductile materials | |

R.S. Barsoum |

Evaluations of CTOD and J-integral for three-point bend specimens with shallow cracks | |

S.X. Wu |

Failure mode and mechanism in cermets under stress-wave loading | |

K.T. Ramesh. B. Altman. G. Ravichandran, S. Nemat-Nasser |

Finite element analysis aided fracture toughness evaluation in tear test of aluminum alloys | |

T. Kobayashi, M. Niinomi, Y. Takabayashi |

Fracture of cylindrical shells containing a circumferential crack | |

M. Kumosa, D. Hull |

Fracture toughness testing in the ductile-brittle transition region | |

K. Wallin |

General methodology for predicting structural behavior under ductile fracture conditions | |

R.E. Link, R. Herrera, I.D. Landes |

HRR field of a moving crack an experimental analysis | |

M.S. Dadkhah, A.S. K obayashi |

Influence of the material inhomogeneity of overmatched welded joints on the crack driving force | |

M. Weidian, X. Xing, T. Xitang, J. A. Goldak |

Interpretation of crack arrest fracture toughness measured with various steels | |

I .F. Kalthaff |

Investigations of cleavage fracture below and at general yield | |

H. Dunnewald-Arfmann, M. Twickler, R. Twickler, W. Dahl |

J integral as a measure of crack driving force in full-scale pressure vessel test | |

S. Sedmak. T. Adziev. B. Petrovski, A. Sedmak |

J integral, R-curve testing of 5052 H112 aluminum utilizing D.C. potential drop and infrared thermographic methods | |

Y. Huang, G.E. Hicho, R.J. Fields |

J-integral calculation by using collocation method and elasto-viscoplastic theory | |

C.W. Woo, Y.K. Cheung, Y.H. Wang |

Macrocrack-microcrack configurations under impact loading | |

C. Zhang |

Measurement of dynamic fracture toughness of ceramic materials at elevated temperature by one-point-bend impact test | |

M. Sakata, S. Aoki, K. Kishimoto |

Micromechanics of dynamic fracturing of ceramic composites: experiments and observations | |

G. Ravichandran, S. Nemal-Nasser |

Multiple run-arrest phenomena in brittle fracture | |

S.M. Kamath |

Near-tip fields of plane-strain crack growing in compressible elastic perfectly plastic material | |

K.C. Hwang, X.F. Luo |

Non-linear finite element analysis of cracked A-517 steel compact tension specimens | |

R.B. Bhagat, M.F. Amateau, M.L. Crocken |

Numeric simulation of transient crack growth experiments | |

T.-J . Shiue, K. Ravi-Chandar |

Numerical analysis of the initiation of ductile fractures | |

C.Q. Zheng, I.C. Radon |

Numerical schemes in FEM for plane strain deformation of incompressible solids with applications to EPFM | |

J. Lanteigne, P. Nguyen-Duy, Y. Blanchette |

On the analysis of ductile fracture mechanisms | |

V. Tvergaard |

Plane stress elastic-plastic fracture criterion and stress-strain field around crack tip | |

D. Haitoo, W. Tzuchiang |

Progress in understanding specimen size and geometry effects on ductile fracture | |

G.P. Gibson, S.G. Druce |

Recent developments in drop tower J integral testing of elastic plastic structural steels | |

J. A. Ioyce |

Relativistic BCS-OHR model | |

I.-H. Lin, R.M. Thomson |

Semi-weight function method in fracture mechanics - use of a reciprocal theorem | |

C.T. Liu, Z. Duanzhong |

Some guidelines on the engineering applications of elastic-plastic fracture mechanics | |

F.J. Witt |

Some observations from an elastic-plastic finite element study of a mixed-mode crack initiation problem | |

D K. Mahanty, S.K. Maiti |

Steady crack growth in elastic-plastic work-hardening solids: near-tip fields and stress discontinuity | |

M. Hori, S. Nemat-Nasser |

Stress fields near crack tip in elastic-perfectly plastic crystals | |

T.C. Wang |

Stress intensity factor variation of a penny-shaped crack situated close to the free surface of a half space | |

K. Mayrhofer, F.D. Fischer |

Stress intensity factors for a cut over an ellipsoidal cap in a 3-D elastic medium | |

BL. Karihaloo, K. Viswanalhan |

Studies on a three-dimensional semi-infinite crack | |

F.G. Benitez |

The 3D stress field at the intersection of a partial through crack and a free surface | |

E .S. Folias |

The effects of toughening stresses on liquid impact induced fracture | |

RJ. Hand, J.E. Field |

The fully plastic solutions of various matched weldment for plane stress problem | |

Z.X. Zhang, Y.W. Shi, M.J. Tu |

The influence of crack tip plasticity in dynamic fracture | |

LB. Freund |

The measurement of dynamic fracture toughness CTOD | |

Z. Xi, T. Tian-Rui |

The pressurized cylindrical crack | |

T.N. Farris. K. Kokini, I. Demir |

The probabilistic theory of crack initiation | |

K. Krausz, A.S. Krausz |

The study on the feasibility of fully plastic solution of weldment for plane stress problem | |

Z.X. Zhang, Y. W. Shi, M. J . Tu |

The T* integral parameter and its applications lo dynamic fracture mechanics of brittle microcracking solids | |

Y. Toi, T. Nishioka, S.N. Atluri |

The temperature field induced by the plastic dissipation in the infinite medium with line of discontinuity | |

Y. Shou-Wen, D. Cross |

Validity of asymptotic crack tip solutions for plastic materials | |

P. Gudmundson |

Weight functions for rigid line inclusions | |

X. Markenscoff, J. Dundurs |

A comparison of different test techniques on fatigue threshold behavior of surface flaws in a titanium alloy | |

S. Mall, D. A. Nagy, J. R. Jira |

A mechanism for hydrogen induced IGSCC in Inconel 600 | |

P. Shewmon |

A study of surface crack fatigue propagation for BHW-35 steel | |

J. Jiang, W. Ye, J. Xue |

Ambient and elevated temperature fatigue crack growth in ceramics and ceramic composites | |

S. Suresh |

An analysis of the effect of environment damage on the creep fracture of Inconel alloy X-750 | |

B. Venkalaraman, G. Sundararajan |

Application of fracture mechanics to microscale phenomena in electronic assemblies | |

A. H. Burkhard, J.M. Kallis, L.B. Duncan, M.F. Kanninen, D.O. Harris |

Applications of a finite element analysis of fatigue crack closure | |

R.C. McClung |

Assessment of the probability of spherical tanks | |

Z. Zhou |

Corrosion fatigue crack initiation from blunt notches in structural steel exposed to seawater | |

P. M. Scott, T.W. Thorpe, R. P. A. Camey |

Corrosion fatigue of pressure boundary materials | |

F. P. Ford, P. L. Andresen |

Crack closure and the propagation of semi-elliptical fatigue cracks in Q1N (HY80) | |

W.O. Soboyejo, J.F. Knoll |

Crack closure effect on two aluminum alloys in relation to short fatigue crack growth behavior - comparison between various measurement techniques | |

A. Lefrancois, A. Pineau |

Crack growth processes during IGSCC of iron | |

RR. Jones |

Crack mode in high temperature multiaxial low cycle fatigue | |

M. Sakane, M. Ohnami |

Crack systems in multiaxial fatigue | |

D.L. McDiarmid |

Creep and fatigue crack growth in tubes at high temperatures | |

M. Rodig, M. Pfaffelhuber, F. Schubert, H. Nickel |

Creep crack growth in an austenitic stainless steel welded joint | |

H. Sassoulas, P. Balladon |

Creep cracking in austenitic weld metal | |

M. Kamaraj, V.M. Radhakrishnan |

Creep deformation and rupture of polycrystalline alumina | |

D. Krajcinovic. L. Wei, A. Stojimirovic |

Damage curve approach in fatigue using acoustic emission technique | |

R. Visweswaran, R. Krishna Kumar, M.R. Praresh, O. Prabhakar |

Effect of crack closure in Nb-H alloys | |

C.C. Un, K. Salama |

Effect of viscosity of an oil environment on fatigue crack growth rate in AISI 316 stainless steel | |

K. Bae, H. Conrad |

Effective properties of creeping solids undergoing grain boundary sliding | |

G. J. Rodin, M. W. Dib |

Effects of environment and frequency of the long fatigue crack growth of aluminium alloy 7475 | |

A.M. Green, J. F. Knott |

Effects of temperature and environment on the long crack growth behaviour of Inconel 718 | |

P. Woollin, J. F. Knott |

Electrochemical considerations of crack growth in ferrous alloys | |

R.P. Wie |

Estimation of fatigue crack growth in patched cracked panels | |

R. Chondra, R. Sunder |

Fatigue crack growth and crack closure behavior of the CrNiMo steels at negative stress ratio | |

X. Jing, B. Lou, F. Shen |

Fatigue crack growth from the rivet hole in a rivetted built-up section subjected to variable amplitude loading | |

G. Balakrishna, V.P. Raghupathy, B.K. Jain, V.M. Radhakrishnan |

Fatigue crack growth in mild steel under cyclic compressive loads | |

C.N. Reid, J. Moffatt, R. Hermann |

Fatigue crack growth under random loading the equivalent loading approach | |

A. Bignoilnet, Y. Sixou, J M . Verstavel |

Fatigue crack tip deformation and singularity fields | |

G. Nicoletto |

Fatigue of nodular cast iron connecting rods | |

J. A . Brueher, R.I. Stephens |

Fatigue of WC Co hardmetals under tension-compression loading - the effects of Co content and WC grain size | |

A. Otsuka, K. Tohgo, H. Sugawara, F. Ueda, H. Hohjo |

Fractography of corrosion fatigue cracks in RPV steels in pressurised water reactor environments | |

A.N. Greenwood, D.R. Tiee |

Fracture control via DRM-algorithm | |

E.A. Galperin |

Fracture energy of water saturated and partially dry concrete at room and at cryogenic temperatures | |

J. Planas. P. Maturana. G. Guinea, M. Elices |

Fracture of silicon carbide whisker reinforced aluminum | |

J. R . Albrillon, J .G. Goree |

Global and local approaches of creep crack initiation and growth applied to an austenitic stainless steel and an aluminum alloy | |

R. Piques, A. Pineau |

Grain boundary sliding and creep fracture of metals under multiaxial stresses | |

W. D. Nix |

Grain size dependence of dynamic strain ageing during low cycle fatigue in type 304 stainless steel | |

K. Bhanu Sankara Rao, M. Valsan, R. Sandhya, S. L. Mannan, P. Rodriguez |

Grain size effect in low cycle fatigue of steel under mean strain | |

J. Komotori, M. Shimizu |

Hydrogen assisted fracture of Inconel 600 charged at high temperature | |

E. Lunarska, Z. Szklarska-Smialowska |

Influence of metastable beta on the low cycle fatigue behavior of Ti-6.3Al-3.5Mo-l .9Zr-0.2Si alloy | |

V.K. Varma, K. Muraleedharan, G. Malakoruiaiah |

Influence of multiple overload on fatigue crack retardation in high strength low alloy structural steel | |

S. Dhar |

Influence of oxidation on fatigue crack growth on the modelling of thermal fatigue cracking | |

F. Rezai-Aria, L. Remy |

Influence of stress state strain hardening and load ratio on plasticity-induced fatigue crack closure | |

J. Llorca, V. Sanchez Galvez |

Influence of the number of overload cycles in the fatigue growth retardation | |

H. J.C. Voorwald, A. M. M. Nazar |

Intrinsic fatigue crack propagation in aluminum-lithium alloys: the effect of gaseous environments | |

R.S. Piascik, R.P. Gangloff |

Isothermal and thermal mechanical low cycle fatigue of 316 L steel | |

C. Korn, G. Pluvinage |

Life prediction at high temperatures | |

G.A. Webster |

Low cycle fatigue behavior of an Al-Li alloy | |

N. Eswara Prasad, G. Malakondaiah, K.N. Raja, P. Rama Rao |

Low cycle fatigue behavior of nimonic PE 16 superalloy | |

M. Valsan, K. Bhanu Sankara Rao, SL. Mannan |

Mechanical/environmental fatigue transient effects in AISI 304 stainless steel | |

Y. Katz, A. Bussiba, H. Mathias |

Mechanisms controlling fatigue damage development in continuous fiber reinforced metal matrix composites | |

W.S. Johnson |

Mechanisms of hydrogen embrittlement during low cycle fatigue in metastable austenite | |

M. Labidi, M. Habashi, M. Tvrdy, J. Galland |

Model of fatigue crack growth based on energy dissipated within the process zone | |

H. Feng, M.S. Lasky, M. P. Wnuk |

Modelling of subcritical crack growth in WC Co hard metals | |

N. Eswara Prasad, S.B. Bhaduri |

Near threshold fatigue curve based on the dislocation shielding model of fracture | |

S.-J. Chang, T. Mura |

Near-tip fields during creep crack growth by grain boundary cavitation | |

F.Z. U. A. Needleman, C.F. Shih |

New concept to crack growth at high temperature creep and creep-fatigue | |

A.T. Yokobori Jr, T. Yokobori |

New material assessment procedures for plant life extension | |

B. Wilshire |

Numerical and experimental fracture analysis of a BWR pressure vessel | |

G. Donzella, L. Vergani |

On the kinetics of the positive-negative temperature dependence of low-stress crack growth | |

A. S. Krausz, K. Krausz |

On the significance of crack closure in fatigue crack growth | |

A. J. McEvily, Z. Yang |

Overload retardation due to plasticity-induced crack closure | |

N.A. Fleck, H.R. Shereliff |

Parametric representation of creep crack growth rate | |

T. Hollstein |

Parametric representation of fatigue threshold and dislocation free zone | |

A.T. Yokobori Jr, T. Isogai, T. Yokobori, I. Maekawa, Y. Tanabe |

Prediction and simulation of fatigue crack growth under conditions of low crack closure | |

WA. Herman, R.W. Hertzberg, R. accard |

Propagation and non-propagation of small fatigue cracks | |

K. Tanaka, Y. Akiniwa |

Random loading fatigue of the welds in BS 4360 steel | |

R. Foroughi, J.C. Radon |

Recent advances in elevated temperature crack: growth and models for life prediction | |

A. Saxena |

Recent advances in fatigue life analysis methods for aerospace applications | |

A. Nagar |

Recent advances in modelling creep crack growth | |

H. Riedel |

Relationship between creep damage models and creep-fatigue interaction | |

K. Yagi. K. Kubo, O. Kanemaru, C. Tanaka, H. Masuda |

Several models to predict the low cyclic corrosion fatigue life | |

J. Zuguo |

Significance of crack closure due to residual stretch and stresses | |

H. Kobayashi, H. Nalcamura, A. Todaroki |

Some studies on fatigue damage as a criterion for dynamic strength optimization | |

M. J. Padmanabhan, S. Suryanarayan, M.S.S. Prabhu |

Stable crack growth thresholds in an aluminium-silicon bronze | |

MA. Phoplonker, J. Byrne, R. L. Jones |

Statistical investigation of high-temperature low-cycle cracks | |

N.A . Mackhutov. V. V. Zatsarinny, V.A. Novikov |

Statistical properties of generalized strain criterion for multiaxial random fatigue | |

E. Macha |

Stress concentration effects on low cycle fatigue crack initiation | |

V. Bicego, G. Gritti |

Stress rate effects in stress corrosion cracking | |

A. Atrens, RM. Rieek, J. O. Smith |

Stress-corrosion cracking of liquid-phase sintered tungsten alloys | |

M. Z. Shah Khan, J. R. Underwood, J. A. Bureh |

Study for mechanism of fatigue crack propagation by measuring slip amount at crack tip | |

H. Masuda, S. Matsuoka, S. Nishijima |

Superposition models for the growth of fatigue cracks at elevated temperature | |

M. B. Cortie |

The accumulated internal energy in the fatigue strength region | |

J. Kaleta, R. Blotny, H. Harig |

The dual crack growth modes in the corrosion fatigue of welded tubular joints | |

J.C.P. Kam, W.D. Dover |

The effect of different dispersoids on the ductile fracture toughness of an Al-Zn-Mg alloy | |

A. Uguz, J.W. Martin |

The effect of intermediate high stress pulses on the high cycle fatigue strength of metals | |

D.H. Allen, P. Greenfield |

The effect of pre-cracking variables R and KFmax on fracture toughness | |

A. A. Steffen, P. F. Packman, M. G. Dawes |

The effect of slip distribution on the growth of small fatigue cracks in Al-Mg-Si alloys | |

S. Gungor, L. Edwards |

The effect of waveform on the fatigue crack propagation behavior of ultrahigh molecular weight polyethylene | |

C.M. Rimnac, T.M. Wright, R.W. Klein |

The effect on fatigue crack growth under spectrum loading of an imposed placard "G" limit | |

K. Wallar, A. F. Grandt Jr |

The effects of carbides and cavities on creep crack growth in HK40 steel | |

S. J. Zhu, J. Zhao, F.G. Wang, Z.B. Cao |

The high temperature deformation and fracture of a mild steel weldment in heavy section low alloy ferritic steel pipe | |

M.C. Coleman |

The influence of material quality on airframe structural durability | |

P.E. Magnusen, R. J. Bueci, A. J. Hinkle, M. E. Artley, R.L. Rolf |

The role of water in the mechanical fatigue of glasses | |

M. Tomozawa |

Thermal-mechanical fatigue behavior of nickel base superalloy single crystals | |

E. Fleury, L. Remy |

Time dependent effects on high temperature low cycle fatigue and fatigue crack propagation of nickel base superalloys | |

F. Gabrielli, M. Marchionni, G. Onofrio |

Unusual fracture mode in the fatigue of an Al-Li alloy | |

GR. Yoder, P.S. Pao, M.A. Imam, L.A. Cooley |

A general damage criterion for solids | |

C.C. Hsiao, Y.S. Cheng |

A method for mechanical state characterization of inelastic composite laminates with damage | |

R .A. Schapery |

A singular element for a variable crack length | |

B. Fedelich, A. Ehrlacher |

About the penny-shaped Dugdale crack under shear and triaxial loading | |

W. Becker, D. Gross |

Advanced analytical methods for interpreting crack run-arrest events in reactor pressure vessel steels | |

C.R. Bass, C.E. Pugh, DJ. Naus, J. Keeney-Walker |

An economic finite element strategy for LEFM problems | |

K. Badari Narayana, T.S. Ramamurthy, B. Dattaguru, K. Vijayakumar |

An integral equation method based on resultant forces on a piece-wise smooth crack in a finite plate | |

W.L. Zang, P. Gudmundson |

Analyses of crack growth in ductile solids | |

A. Needleman, V. Tvergaard |

Analysis of J-integral and HRR singularity using experimental and computational hybrid method with image processing | |

G. Yagawa, N. Soneda, S. Yoshimura |

Computational fracture mechanics | |

H. Liebowitz |

Computer modelling of the evolution of hydraulic fracturing phenomena in hydrocarbon reservoirs | |

R. Romagrwli, R. Varvelli |

Continuum modeling of the development of intralaminar cracking in composite laminates | |

R. Talreja |

Crack tip parameters for a central crack in an elastic plastic plate under mixed mode and repetitive loading | |

W.S. Blackburn |

Damage analysis of materials with microvoids | |

D. Shanyi, L. Yingjie |

Damage equations for physically-based creep life | |

B.F. Dyson, F.A. Leclde |

Energy analysis of crack-damage interaction | |

A. Chudnovslcy, S. Wu |

Energy criteria for stable crack growth simulation under biaxial loading using finite element method | |

R.N. Singh, C. V. Ramakrishnan |

Experimental study on mixed mode crack propagation | |

Z. Yishu |

Finite element method of thin shell J integral evaluation | |

A. Sedmak, M. Berkovic, J. Jaricm, S. Sedmak |

Fracture analysis of non-coplanar crack extension under mixed-mode loading by the crack closure integral method | |

F.-G. Bucholz, H.A . Richard |

Fracture curve of a thin-walled tube in torsion test | |

J. Qing |

Fracture of fibrous metal matrix composites | |

GJ. Dvorak, Y.A . Bahei-El-Din |

High-speed frictional heating effect on the stress intensity factors of a near-surface line crack | |

F.D. Ju, T.Y. Chen |

Mesh generation by conformal mapping in two-dimensional fracture problems | |

O. Haber, H. Grebner, A. Hofler |

Mixed mode cohesive crack propagation | |

A. Carpinteri, S. Valente, P. Bocca |

Mixed mode fracture in concrete | |

A. Hillerborg |

Mixed modes of the crack propagation under biaxial cyclic load | |

V.N. Shlyannikov, V.A. Dolgorukov |

Mode transformation of growing stage I cracks in polycrystals | |

C. Li, T. Bretheau |

Numerical calculations for problems of ductile fracture | |

RM. McMeeking |

Numerical evaluation of creep experiments | |

W. Schmitt, R. Kienzler, T. Hollstein |

On some recent advances in computational methods in the mechanics of fracture | |

S.N. Atluri, T. Nishioka |

Plastic damage evolution in low-carbon steels | |

W.H. Tai |

Plasticity and thickness effect | |

L. Anquez |

Progress in the assessment of complex components | |

E. Sommer |

Shear failure of Al-Cu single crystals | |

C.Q. Chen, H. X. Li, W. Yao |

Some aspects of fatigue crack growth under mixed mode loading | |

K. Henn, H.A . Richard |

Stable path of interacting crack systems and micromechanics of damage | |

Z.P. Bazant, M.R. Tabbara, M.T. Kazemi |

The damage criterion for ductile fracture and ils applications | |

W. H. Tai |

The line spring model for surface cracked shell subjected to antisymmetric loadings | |

L. Yinchu, T. Guojin |

The line-spring model analysis of surface crack at weld joint of two tubes | |

L. Yinchu, L. Xi |

The stress intensity factors at the tip of a kinked and curved crack | |

J .B. Leblond, M. Amestoy |

Torsional vibration of a penny-shaped crack in a transversely isotropic material | |

Y.M. Tsai |

Tribo fracture - basic concepts and phenomena | |

O. Vingsbo |

Unified damage approach to crack initiation | |

J. Lemaitre |

Use of two singular point finite elements in the analysis of kinked cracks | |

B. X. Dutta, A. Kakodkar, S.X. Maili |

Various crack concepts for curved fracture in concrete | |

J .G. Rots |

Void formation in short-fiber composites | |

A. Needleman, S.R. Nutt |

A comparison of multispecimen J-integral methods as applied to toughened polymers | |

D.D. Huang |

A study of inter-relationship between metal processing, grain boundary segregation and impact toughness of 17-4 precipitation hardened stainless steel | |

R.D.X. Misra, C.Y. Prasad, T. V. Balasubramanian, P. Rama Rao |

Burst pressure prediction of a maraging steel chamber with surface cracks | |

B. Nageswara Rao, A.R. Acharya, J.DA. Subramanyam, N.R .UK. Kartha |

Cleavage fracture of steels with fine grained ferrite, coarse grained bainitic and martensitic microstructures | |

T. Miyata, R.C. Yang, A. Otsuka, T. Haze, S. Aihara |

Cracks on bimaterial interface-an overview | |

C. Atkinson |

Creep rupture of a metal-ceramic particulate composite | |

T.-J. Chuang, D.F. Carroll, S.M. Wiederhom |

Critical assessment of microscopic cleavage fracture stress measurement methods by experiments on hot work tool steel | |

R. Roberti, G.M. La Vecchia, S. Rossi, D. Firrao |

Damage and fracture of composite materials under cyclic loads | |

W. W. Stinchcomb |

Effect of austenitising temperature on creep fracture of a 12 CrMoV steel | |

S.A. Bashu, K.N. Singh, K.M. Chowdary |

Effect of geometric constraints on toughness of polycarbonate | |

K. Sehanobish, D.H. Bank, C.P. Bosnyak |

Elastic/perfectly-plastic small scale yielding at bi-material interfaces | |

D. M. Parks, E. Zywicz |

Fatigue behavior of medium strength Al-Mg alloy 5083 | |

J .D. Costa, C. M. Branco |

Fatigue crack growth and closure in a SiC -reinforced aluminum composite | |

C.P. You, J.E. Allison |

Fatigue crack growth behavior of HSLA steel at low temperature | |

W.B. Yan, MJ. Tu, Z.Z. Hu, J.X. Liu, X.H. Tu |

Fracture analysis of CT specimens of low strength alloy steels | |

M.T. Ayoub |

Fracture and toughening mechanisms in polymer alloys | |

A.F. Yee, RA. Pearson, HJ. Sue |

Fracture behavior of commercial Al-Li alloys | |

R.C. Dorward |

Fracture in monolithic ceramics at high temperatures | |

R. Raj |

Fracture of composite in aerospace application | |

T.C. Fan |

Fracture of intermetallic matrix composites | |

N.S. Stoloff, B. Moore |

Fracture of steel/carbide particulate composites | |

A.M. Ritter, MR. Jackson, RN. Wright |

Fracture toughness depending on compounded structure of materials | |

K. Detert, K. Becker, K.D. Ginsberg |

Fracture toughness of discontinuous SiC reinforced aluminium alloys | |

R.D. Gooslby, L.K. Austin |

Influence of an atmospheric environment on the fatigue crack growth behavior of the 8090 aluminium lithium alloy | |

C. Gounet Lespinasse, C. Bathias |

Influence of prestraining and ageing on the fatigue properties of a dual phase sheet steel | |

H. Fredriksson, A. Melander |

Intergranular failure in micro-alloyed steels and its relationship to carbon content | |

B. Mintz, Z. Mohamed |

J-integral characterization of impact-modified polymers | |

M.T. Takemori, I. Narisawa |

Kinetic strength of solids | |

C.C. Hsiao |

Local stress relaxation in a Ti-6Al-4V-2Fe/SCS-6 SiC composite during thermal cycling | |

M. R. Lames, W.L. Morris, BN. Cox |

Mechanical behavior of non-brittle ceramics: C-SiC and SiC-SiC composites | |

J. M. Louin, L. Heraud, B. Malassine |

Microstructural and mechanistical factors affecting creep-fatigue properties of heat-resisting cast steels | |

T. Yokomaku, M. Saori |

Microstructural effects governing the fracture behavior of Al-Li-Cu-Mg alloy 8090 | |

T.S. Srivatsan, TA. Place, T.S. Sudarshan |

Microstructural studies of ceramics and ceramic composites | |

M. Ruhle, E. Bischoff |

Microstructure and particle size effects on fracture in aluminum metal matrix composites | |

M. Manoharan, C. Liu, J. J . Lewandowski |

Microstructure and steel rail shelling resistance | |

H.P. Lieurade, K. Dang Van, N. Ji |

On the characteristic distance for fracture in Al Si 4140 alloy steel | |

FA. Darwish. L.C. Pereira, M.L. Graca |

On the expansion of a crack layer's active zone | |

A. Chudnovsky, S. Wu, J. Butsis |

Photoelastic analysis of a crack at bimaterial interface | |

F.P. Chiang, H. Luand, X.T. Yan |

Physical meaning of KIc at cleavage fracture | |

CX. Hou. Q.G. Cai, Y. Su |

Plane-strain crack-tip fields for power-law hardening pressure-sensitive dilatant materials | |

F.Z. Li, J. Pan |

Sources of toughness in polymers | |

A.S. Orgon |

Statistical failure approach to a heterogeneous material | |

D. Wei, D. Baptiste, P. Bompard, D. Francois |

Stress analysis for thin bonded layers | |

LM. Keer, Q. Guo |

Study of fracture toughness of fly-ash filled cross-ply glass fibre reinforced epoxy resin | |

V.K. Srivastava, A.M. Roodpishi |

Study on fracture toughness of welded joints for 15MnMoVNRE steel | |

YL. Wang, BL. Lei, H. Sun |

Surface stress effects in indentation fracture | |

D. J. Greenand, R. Tandon |

Tempering temperature and blunt notch toughness of Ni-Cr-Mo steels | |

D. Firrao, R. Roberti, G.M. La Vecchia |

Tensile and fatigue properties of SiC whiskers or SiC particulate reinforced aluminum composites | |

C. Masuda, Y. Tanaka |

The effect of various precracking techniques on the fracture toughness of plastics | |

M.S. Cayard, W.L. Bradley |

The fracture toughness of spring steel containing surface cracks | |

Q. Li, S. Hu |

The toughening mechanism in a continuous SiC fiber/CVI-SiC matrix composite | |

K.W. White, R.C. Bradt, A.S. Kobayashi |

Thermal cycling damage of high temperature metal matrix composites | |

T. Morimoto, M. Taya |

Thermal severing: the cutting of brittle materials by thermally induced fracture | |

J. N. Dekker, M.H. Zonneveld |

Time dependent and cycle dependent behavior of sintered silicon carbide and alumina ceramics | |

A.T. Yokobori Jr, T. Adachi, T. Yokobori, H. Abl, J. Nakayama, H. Takahashi |

Time dependent fracture of polymers | |

W.G. Knauss |

Toughening mechanisms in Al2O3-SiCw composites | |

A. Chakraborty, S.B. Bhaduri, J J. Reddy, R. Mchan Rao, Y.R. Mahajan |

Toughness distribution considerations in a thin film system | |

L.D. Brown, H.L. Marcus |

Transient effects in creep cavity nucleation and early growth in ceramics | |

R. A. Page, K.S. Chan |

Transient fracture resistance in the weak toughening limit | |

R.F. Cook |

Transition of advanced metallic materials into new weapon systems | |

J .W. Lincoln. CR. Sajfandl, L. Rudd |

Warm prestressing effects in notched bars of a MnNiMo steel weld-metal | |

P.A.S. Reed, J .F. Knott |

Yielding behavior of ceramic matrix composites | |

B.S. Majumdar, G.M. Newaz, A.R. Rosenfield |

3D deformation of tensile cracks in thin ductile sheets: an optical and finite element investigation | |

H.V. Tippur, F.P. Chiang |

A miniatured specimen technique for fracture toughness (JIc) measurement | |

X. Mao, T. Shoji, H. Talcahashi |

A reassessment of the ASTM method for the evaluation of the JIc toughness | |

V R. Ranganath, A.N. Kumar, RX. Pandty |

A stereological analysis of ductile fracture by microvoid coalescence | |

J.-H. Steele Jr |

Acoustic emission in fracture of structural materials with non-metallic inclusions | |

K. Ono, H.B. Teoh |

Advances in J-integral estimation analysis for circumferentially flawed throughwall pipes in bending | |

A. Zahoor |

Characterizing closure asperities by ultrasonic measurements | |

R.B. Thompson, L. Van Wyk, D.K. Rehbein, Y.-M. Tsai, O. Buck |

Comb cracking in cemented carbides | |

R. Krishnamurthy, A.S. Choudhury |

Crack opening displacement measurement methods for crack arrest experiments | |

J.H. Giovanola, T. Kobayashi |

Deducing mechanical properties due to interfaces from their acoustical response | |

O. Buck, R.B. Thompson, D.K. Rehbein, L. J. H. Brasche, D. D. Palmer |

Determination of ASME code requirements for BWR hydrotest temperature and PWR LTOP set-points using probabilistic fracture mechanics analysis | |

R.M. Gamble, T J. Griesbach |

Dynamic Moire interferometry investigations of elastic wave propagation in ASTM A-710 Izod specimens | |

J.S. Epstein, V.A. Deason, W.G. Reut |

Evaluation of fracture concepts by means of micro Moire method and laser interferometry | |

B. Michel, R. Kuehnert, P. Will, K. Henniger |

Experimental characterization and geometrical modelling of fatigue fracture profiles | |

B. Karlsson, J. Wasen |

Experimental methods for determining dynamic stress intensity factor in opaque materials | |

A. Shukla, H. Nigam, R. X. Agarwal |

Experimental study of mixed mode stress intensity factors in rotating disk having the cracks by photoelasticity and caustic method | |

S. Talcahashi, T. Ezumi |

Fatigue failure analysis by X-ray fractography | |

A. Bignonnet., A. Dias, J. L. Lebrun |

Fractographic analyses of fatigue fracture surfaces of 7050 aluminium alloy | |

R. Gurbuz, M. Doruk, W. Schutz |

Fractography study of fibre reinforced epoxy resin composites | |

VX. Srivastava |

Fracture mechanics concepts to increase the reliability of high-pressure gas cylinder | |

E. Czoboly, G. Frigyes, I. Havas, J. Lovas, G. Somogyi, L. Toth |

Fracture mechanics evaluation of a highly redundant reactor pressure vessel internal structure | |

T. L. Gerber, A.Y. Kuo, T. J. Griesbach, D.M. Norris |

Fracture toughness KQ and fractography of S1 type freshwater ice | |

I .P. Dempsey |

Influence of the stress state on size and feature of dimples on ductile fracture surfaces | |

J. Xie, Y.W. Shi |

Mathematical morphology and quantitative fractography | |

J L. Cherman, M. Coster |

NDE of strength related properties of adhesive joints | |

A.K. Mal, Y. Bar-Cohen |

Near tip measurement issues in cracked bodies | |

C.W. Smith |

Nondestructive evaluation of a turbine generator casing | |

R. DeNale, EM. Hackert, L.R. Link, R.E. Green |

Observations on the behavior of surface flaws in the presence of cladding | |

S. X. Iskander, R.X. Nanstad |

On measuring the instantaneous stress intensity factor for propagating cracks | |

J.W. Dally, RJ. Sanford |

On the applicability of a computerized single specimen technique to evaluate JIc | |

V K. Saxena. M. Srinivas, G. Malalwndaiah |

On the way to fracturedom | |

A.K. Das |

Optical interference measurements of interfacial crack initiation and propagation | |

K.M. Liechti, Y.S. Chai |

Opto-electronic measuring methods in dynamic elastic-plastic fracture mechanics | |

K. Kussmaul, T. Demler, A. Klenk |

Quantitative evaluation of microcrack by acoustic emission analysis | |

T. Kishi, M. Enoki |

Quantitative study of fracture by acoustic emission from cracks | |

K.Y. Kim, W. Sachse, P. Hsieh |

Reference fracture toughness for irradiated reactor pressure vessels | |

W. L. Server, T. J. Griesbach |

Relation between striation spacing and fatigue crack growth rate in Al-alloy sheets | |

I. Nedbal, J . Siegl, J. Kunz |

Some examples of quantitative fractographic investigations | |

I.L. Chermanr. L. Chermanr, M. Coster |

Stereo-photogrammetry as applied to fractography | |

J.D. Bryant |

Strength evaluation by ultrasonic methods | |

J. D. Achenbach |

Testing of cracking sensitive materials by the method of X-ray fractography | |

Yu B. Saprykin |

The constitution of an uncrosslinked polymer in the process of damage accumulation | |

W.G. Knauss, M. Parvin |

The current status of modern quantitative fractography | |

E. E. Underwoo |

Typical failures in high energy piping weldments | |

J. D. Parker |

Ultrasonic characterization of dissimilar bonds | |

P.B. Nagy, L. Adler |

Ultrasonic evaluation of microcracks in composites | |

V. Dayal, V. Iyer, V. X. Kinra |

Ultrasonic measurement of creep damage in pipe | |

U. Stigh, P. Sotkovszki |

Ultrasonic measurement of fracture toughness of a nuclear grade steel | |

A.N. Sinclair, T. Chau |

Ultrasonic scattering and NDE of surface breaking cracks | |

K.R. Khair, S.K. Datta |