General Papers
| 2897 - MECHANISM OF CLEAVAGE FRACTURE OF HSLA STEEL | |
| Chen J.H., Wang G.Z. |
| 2898 - CHANGE OF CRITICAL EVENT FOR CLEAVAGE FRACTURE OF HSLA STEEL | |
| Chen J.H., Wang G.Z. |
| 2900 - FRACTURE MECHANISM OF A TIAL ALLOY | |
| Chen J.H., Cao R., Wang G.Z., Zhang J. |
| 2929 - A PROBABILISTIC MODEL TO SIMULATE THE ORIGIN AND INCEPTION OF FATIGUE IN METALS | |
| Guralnick S.A., Mohammadi J. |
| 2940 - MATERIAL POINT METHOD CALCULATIONS WITH EXPLICIT CRACKS, FRACTURE PARAMETERS, AND CRACK PROPAGATION | |
| Nairn J., Guo Y., AND CRACK PROPAGATION, Stavros Kourkoulis |
| 2967 - DAMAGE EVOLUTION IN COMPRESSED CONCRETE | |
| Stroeven P., Hu J., Tomas Walander |
| 3007 - CLEAVAGE INITIATION MECHANISM IN NOTCHED SPECIMENS OF STEEL WITH CARBIDES AND INCLUSIONS | |
| Wang G.Z., Chen J.H. |
| 3008 - EFFECTS OF LOADING RATE ON THE LOCAL CLEAVAGE FRACTURE STRESS σf IN NOTCHED SPECIMENS | |
| Wang G.Z., Wang Y.L., Chen J.H. |
| 3070 - USE OF EBSD TO STUDY HYDROGEN INDUCED CRACKING IN PIPELINE STEEL | |
| Venegas V., Caleyo F., González J. L., Baudin T., Hallen J.M., Penelle R. |
| 3074 - DUCTILE TEARING OF 2024 ALUMINUM ALLOY PANELS | |
| Bron F., Besson J. |
| 3091 - AN INVERSE APPROACH FOR CONSTRUCTING RESIDUAL STRESS FIELD INDUCED BY WELDING | |
| Hu N., Cao Y.P., Lu J., Fukunaga H. |
| 3099 - SIMULATION OF IMPACT AND FRAGMENTATION WITH THE MATERIAL POINT METHOD | |
| Banerjee B., Guilkey J. E., Harman T.B., Schmidt J.A., McMurtry P.A. |
| 3110 - RECENT ADVANCES IN MODELLING DUCTILE RUPTURE | |
| Benzerga A.A., Besson J., Pineau A. |
| 3168 - 3D COMPUTATIONAL TESTING OF MICROSTRUCTURES OF PARTICLE REINFORCED METAL MATRIX COMPOSITES | |
| Mishnaevsky L. Jr., Ryosuke Komoda, Jader Furtado |
| 3182 - THERMAL-MECHANICAL FATIGUE BEHAVIOUR OF MICROCAST-X INCONEL 718 | |
| Richards N.L., Zagula J., Chaturvedi M.C. |
| 3222 - THEORETICAL AND COMPUTER MODELLING OF DEBONDING MECHANISMS IN FIBROUS MICRO- AND NANO-COMPOSITES | |
| Rushchitsky J., Guz I. |
| 3228 - INFLUENCE OF CONTINUOUS NUCLEATION OF SECONDARY VOIDS UPON GROWTH AND COALESCENCE OF CAVITIES IN POROUS DUCTILE METALS | |
| Enakoutsa K., Leblond J.-B., Audoly B. |
| 3229 - ON THE EVALUATION OF INTERFACIAL CRACK INITIATION BY MEANS OF FINITE FRACTURE MECHANICS | |
| Müller A., Hohe J., Becker W. |
| 3279 - DISORDER OF THE FRONT OF A TENSILE TUNNEL-CRACK PROPAGATING IN SOME INHOMOGENEOUS MEDIUM | |
| Leblond J.-B., Favier E., Lazarus V. |
| 3331 - RECENT RESULTS ON DUCTILE FRACTURE MODELING AT THE MACRO AND MICROSCALES | |
| Rousselier G., Leclercq S., Pastor J., Bilger N. |
| 3339 - A COMPUTATIONAL MODEL FOR DAMAGE EVOLUTION IN CERAMIC COATINGS: EFFECT OF RANDOM MICROSTRUCTURE | |
| Silberschmidt V.V., Zhao J. |
| 3344 - AN ELLIPTIC CRACK IN A PIEZOELECTRIC MATERIAL | |
| Saha T.K.., Sergei Alexandrov, Yeau-Ren Jeng |
| 3361 - ANALYSIS OF LOADING RATE EFFECTS ON CLEAVAGE FRACTURE TOUGHNESS OF FERRITIC STEELS | |
| Dodds R. Jr., Gao X. |
| 3376 - STUDY OF THE DYNAMIC INTERACTION BETWEEN A FAST RUNNING CRACK AND AN INCLUSION USING THE TIME DOMAIN BEM | |
| Wang Y.-S., LeiI J., Gross D. |
| 3392 - EXPERIMENTAL DETERMINATION OF CTOA TOUGHNESS | |
| Hashemi S.H., Gay R., Howard I.C., Yates J.R., Andrews R.M. |
| 3406 - LIFETIME AND DAMAGE BEHAVIOUR OF A CAST ALUMINIUM ALLOY UNDER TMF AND SUPERIMPOSED TMF/HCF LOADING | |
| Luft J., Beck T., Löhe D. |
| 3420 - STABILITY OF A DYNAMIC CRACK PROPAGATING IN AN ELASTIC STRIP | |
| Movchan N.V., Movchan A.B., Willis J.R. |
| 3429 - THE EFFECT OF SURFACE TERRACING AND CONFINED NANOPARTICLES ON CRAZING IN SYMMETRIC PS-B-P2VP THIN FILMS | |
| Lee J.-Y., Crosby A. |
| 3436 - NUMERICAL SIMULATION OF CRAZE INITIATION AND GROWTH IN GLASSY POLYMERS | |
| Wang T.J., Wang J.G., Yin Z.N. |
| 3467 - CRACK GROWTH PREDICTIONS IN ALUMINUM AND TITANIUM ALLOYS UNDER AIRCRAFT LOAD SPECTRA | |
| Newman J.C. Jr. |
| 3473 - CRITICAL FLAW SIZE REDUCTION IN SI3N4-TIN COMPOSITES FOR WEAR APPLICATIONS | |
| Blugan G., Kuebler J. |
| 3486 - ANALYSIS OF DISCONTINUITIES IN FLUID-SATURATED MEDIA | |
| Abellan M.A., de Borst R., Bergheau J.M., J-C. Ménard |
| 3513 - 3-D EFFECTS ON FATIGUE CRACK CLOSURE PROCESSES IN SMALL-SCALE YIELDING | |
| Chowdhury S.R., Dodds R.H. Jr. |
| 3518 - THE STRESS FIELD OF A SHEAR CRACK PROPAGATING IN A VISCOELASTIC MEDIUM | |
| Antipov Y.A., Willis J.R. |
| 3528 - UNIVERSAL ASPECTS OF DYNAMIC FRACTURE IN BRITTLE MATERIALS | |
| Livne A., Fineberg J. |
| 3581 - DAMAGE TOLERANT RISK ANALYSIS TECHNIQUES FOR EVALUATING THE STRUCTURAL INTEGRITY OF AIRCRAFT STRUCTURES | |
| Gallagher J.P., Babish C.A., Malas J.C. |
| 3587 - SMALL-CRACK GROWTH AND FATIGUE-LIFE PREDICTION OF CORRODED OPEN-HOLE SPECIMENS | |
| Newman C. Jr., Abbott W., Victor Fourman, Rami Eliasi |
| 3617 - MODELING THE EVOLUTION OF SLOPE FAILURE AS A CRACK PROPOGATION PROBLEM | |
| Lin J.-S., Ku C.-Y. |
| 3624 - SIZE EFFECT ON COMPRESSIVE STRENGTH OF CONCRETE | |
| Kim J.-K., Yi S. T. |
| 3680 - HOW MUCH INPUT IS NEEDED FROM THE MICROSTRUCTURE TO MODEL DUCTILE FRACTURE? | |
| Benzerga A.A., Besson J., Pineau A. |
| 3681 - DETACHMENT WAVES AND THE ONSET OF FRICTIONAL SLIP | |
| Fineberg J., Rubinstein S.M., Cohen G. |
| 3718 - CRACK PROPAGATION IN PZT DCB SPECIMENS UNDER CYCLIC ELECTRIC LOADING | |
| Westram I., Lupascu D.C., Rödel J. |
| 3767 - FINITE ELEMENT ANALYSES OF NOTCH-TIP FIELDS OF PLANE PIEZOELECTRIC MATERIALS CONTAINING AN ELLIPTICAL NOTCH | |
| Wang X., Wang X., Gong J. |
| 3775 - MIXED-MODE CRACK PROPAGATION IN FUNCTIONALLY GRADED MATERIALS | |
| Kim J.-H., Paulino G.H. |
| 3791 - INFLUENCE OF THE MINERAL WOOL PRODUCTION TECHNOLOGICAL PARAMETERS AND HUMIDITY ATTACK ON ITS FIBRE FRAGILITY | |
| Keriene J. |
| 3835 - TWO PARAMETER APPROACHES IN THE PROBABILISTIC FAILURE ASSESSMENT OF FERRITIC STEELS | |
| Hohe J., Hebel J., Siegele D. |
| 3839 - A CRITERION STUDY FOR NON-SINGULAR STRESS CONCENTRATION WITH SIZE EFFECT | |
| Li J., Zhang X.-B. |
| 3840 - A VARIATIONAL APPROACH OF FATIGUE DEBONDING | |
| Marigo J.-J., Jaubert A. |
| 3850 - NUMERICAL APPROACH IN THERMOMECHANICAL FATIGUE | |
| Charkaluk E., Constantinescu A., Thomas J.J. |
| 3860 - OBJECT-ORIENTED DEVELOPMENT ENVIRONMENT TO COMPUTE MULTIAXIAL FATIGUE CRITERIA | |
| Charles J.-L., Palin-Luc T., Delahay T. |
| 3939 - ABOUT THE NECESSITY OF NEW TESTING PROCEDURES FOR MIXED MODE FRACTURE OF QUASIBRITTLE MATERILAS | |
| Gálvez J.C., Planas J., Elices M., Cendón D.A., Sancho J.M., Reyes E. |
| 3960 - EFFECTS OF THE HYDRIDE CONCENTRATION AND THE NEAR CRACK TIP GRADIENT ON THE FRACTURE TOUGHNESS OF ZIRCALOY-4 | |
| Bertolino G., Perez Ipiña J., Meyer G. |
| 3982 - MULTISCALE MODELING AND SIMULATION OF CRACK PROPAGATION IN POLYCRYSTALLINE SOLIDS | |
| Chen Y., Oskard M.S., Lee J.D., Eskandarian A. |
| 4034 - SIMPLE COMPUTATIONAL METHOD FOR COHESIVE CRACK IN CONCRETE-LIKE MATERIALS | |
| Sancho J.M., Planas J., Cendón D.A., Reyes E., Galvez J.C. |
| 4044 - CONTACT DAMAGE IN DENTAL MULTILAYERS: FROM EXPERIMENTS TO MECHANISM-BASED MODELS AND BIOINSPIRED DESIGN | |
| Soboyejo W., Huang M., Shrotriya P., Zhou J.K., Niu X., Thompson V. |
| 4064 - DUCTILE TO BRITTLE TRANSITION OF INTER PURE AL SHEET CONSTRAINED BY PARALLEL BI-INTERFACE WITH HIGH STRENGTH AL ALLOY | |
| Sun J., Han L.H., Li L. |
| 4081 - DDSIM: A NEXT GENERATION DAMAGE AND DURABILITY SIMULATOR | |
| Emery J.M., Wawrzynek P.A., Ingraffea A.R. |
| 4087 - THREE DIMENSIONAL EFFECTS ALONG THE CRACK FRONT INFLUENCING THE VALIDITY CRITERIA FOR DETERMINING FRACTURE TOUGHNESSES | |
| Zúñiga D.F., Canteli A.F., Kalthoff J.F., Grasa J., Doblaré M. |
| 4090 - FRACTURE TOUGHNESS OF FAST PROPAGATING CRACKS IN ROCK | |
| Bertram A., Kalthoff J.F. |
| 4100 - ON A FINITE ELEMENT WITH EMBEDDED DISCONTINUITIES FOR NUMERICAL MODELING OF FRACTURE | |
| Oliver J., Huespe A., Blanco S., Sviatoslav Hirnyj |
| 4102 - THE EFFECT OF TEMPERATURE AND ENVIRONMENT ON THE FATIGUE BEHAVIOUR OF A THIRD GENERATION γ-TiAl ALLOY | |
| Bauer V., Christ H. J., Cui W., Jozef Predan, Mirco Chapetti |
| 4108 - IMPACT-DYNAMIC BEHAVIOUR OF AL-TRIP STEEL | |
| Verleysen P., Van Slycken J., Degrieck J., De Cooman B.C., Samek L. |
| 4175 - MINIATURISED CREEP TESTING USING THE SMALL PUNCH TEST TECHNIQUE | |
| Stratford G.C., Di Persio F., Klaput J. |
| 4177 - BIAXIAL TESTING OF NUCLEAR PRESSURE VESSEL STEEL USING SMALL SCALE CRUCIFORM SPECIMENS | |
| Joyce J.A., Link R.L., Roe C., Gaies J. |
| 4187 - NANOMETER SCALE TRIBOCHEMICAL MODIFICATION OF SURFACES | |
| Dickinson J.T. |
| 4191 - MULTI-SCALE MECHANICAL BEHAVIOR OF METALLIC FOAMS: FROM STRUTS TO FOAMS | |
| Soboyejo W., Zhou J., Allameh S. |
| 4197 - NONLOCAL COMPUTATIONAL METHODS APPLIED TO COMPOSITE STRUCTURES | |
| Germain N., Feyel F., Besson J. |
| 4207 - DESIGN OF FASTENINGS BASED ON THE FRACTURE MECHANICS | |
| Eligehausen R., Ozbolt J., Bohdan Klym, Valentin Skalsky, Sergey Builo |
| 4218 - MESHLESS ANALYSIS OF CRACK PROPAGATION IN MULTIPHASE MATERIAL | |
| Chen Y., Lee J.D., Oskard M.S., Eskandarian A., Reinhard Pippan |
| 4224 - NUMERICAL ANALYSIS OF INTERGRANULAR DAMAGE AND FRACTURE BEHAVIOR OF BRITTLE CONTINUA WITH STOCHASTIC GRAIN BOUNDARIES | |
| Yu J., Li J., Zheng Z. |
| 4225 - FRACTURE OF ATOMIC LAYER DEPOSITED TUNGSTEN FILMS | |
| Moody N.R., Jungk J.M., Mayer T.M., Wind R.A., George S.M., Gerberich W.W. |
| 4232 - CONTACT FATIGUE IN TURBINE ENGINES DUE TO AEROELASTIC AND INERTIAL LOADING | |
| Calcaterra J., Naboulsi S., G.V. Klevtsov, I.P. Semenova, R.L. Islamgaliev, M.R. Kashapov |
| 4234 - THERMAL STRESS ANALYSIS OF TETRAGONAL SINGLE CRYSTAL DURING GROWTH PROCESS : PMO SINGLE CRYSTAL | |
| Miyazaki N., Matsuura Y., Imahase D., L. Jakl |
| 4235 - NUMERICAL SIMULATION OF CRACK GROWTH IN HIGH PRESSURE COMPONENTS | |
| Bouvard JL., Chaboche JL., Gallerneau F., Feyel F. |
| 4237 - FATIGUE CRACK GROWTH IN WELDED RAILS | |
| Ringsberg J.W., Josefson B.L., Skyttebol A. |
| 4291 - SIZE EFFECT EXPERIMENTS ON CONCRETE UNDER MULTIAXIAL COMPRESSION | |
| Elkadi A., van Mier J. |
| 4293 - COMPUTATION OF DYNAMIC STRESS INTENSITY FACTORS IN FGMS BY AN ADVANCED LBIEM | |
| Sladek J., Sladek V., Zhang C. |
| 4302 - MONITORING STRAIN IN ENGINEERED CEMENTITIOUS COMPOSITES USING WIRELESS SENSORS | |
| Lynch J.P., Hou T.-C. |
| 4303 - MODE II FRACTURE ENERGY OF FRP-CONCRETE INTERFACE: ITS EVALUATIONS AND ROLES IN INTERFACE MODELING AND ANCHORAGE DESIGN | |
| Ueda T., Dai J., Peter Flewitt |
| 4339 - INVESTIGATIONS OF FAILURE BEHAVIOUR OF FLAWED STEEL SPECIMENS WITH ELECTRON BEAM WELDS | |
| Bajric A., Brocks W., Dahl W., Heyer J., Langenberg P. |
| 4340 - CORRELATION BETWEEN FRACTURE BEHAVIOUR AND DUCTILITY OF THE CELL STRUT MATERIAL IN CASE OF METALLIC FOAMS | |
| Ohrndorf A., Krupp U., Christ H. J. |
| 4346 - SPECTRAL SCHEME FOR ANALYSIS OF DYNAMIC DELAMINATION OF A THIN FILM | |
| Geubelle P.H., Hendrickx J.M., Sottos N.R. |
| 4378 - PERFORMANCE OF CREEP CRACK GROWTH ON W STRENGTHENED 9-12Cr STEEL | |
| Kobayashi K.I., Shimizu S., Hirohashi M., Fuji A., Yokobori A.T. Jr |
| 4385 - ANALYTICAL EVALUATION OF J-INTEGRAL FOR AN ELLIPTICAL NOTCH | |
| Livieri P., Segala F., Xin-Hai Li, Lars Östergren, Sten Johansson, Sören Sjöström |
| 4393 - TWO-DIMENSIONAL AND THREE-DIMENSIONAL FRACTURES IN A FACE CENTERED CUBIC ALLOY | |
| Morel S., Olive J.-M. |
| 4403 - EXPERIMENTAL STUDY ON THE RELATIONSHIP BETWEEN IMPACT FRACTURE PROPERTIES AND TITANIUM ADDITION FOR HSLA STEELS | |
| Fang J. |
| 4404 - SPLITTING DESIGN FOR ANCHORAGES AND SPLICES WITH POST-INSTALLED REINFORCEMENT | |
| Kunz J., Walentin Teraud |
| 4407 - DESTRUCTIVE EVALUATION AND EXTENDED FATIGUE TESTING OF RETIRED AIRCRAFT FUSELAGE STRUCTURE | |
| Bakuckas Jr. J.G., Carter A., Xieqiao Feng |
| 4421 - MODELING SMALL FATIGUE CRACK GROWTH IN CAST ALUMINUM ALLOYS | |
| Shyam A., Jones J.W., Allison J.E. |
| 4428 - A COMBINED SIMULATIVE AND EXPERIMENTAL APPROACH TO RELIABILITY OPTIMIZATION OF MEMS | |
| Wittler O., Keller J., Vogel D., Michel B. |
| 4448 - FRACTURE OF Ti/SiC COMPOSITES AT ROOM AND HIGH TEMPERATURE: EXPERIMENTS AND SIMULATIONS | |
| LLorca J., González C., Weck A. |
| 4449 - AN ANALYTICAL AND EXPERIMENTAL STUDY TO ESTABLISH "CRITICAL FLAW SIZES" FOR HIGH PRESSURE SEAMLESS CYLINDERS | |
| Smith J.H., Rana M.D. |
| 4453 - STRENGTH AND FRACTURE BEHAVIOUR OF ANNEALED AND TEMPERED FLOAT GLASS | |
| Veer F.A., Bos F.P., Zuidema J., Romein T. |
| 4469 - FATIGUE CRACK PROPAGATION OF INORGANIC NANOPARTICLE FILLED POLYAMIDE 6,6 | |
| Zhang Z., Yang J.-L., Zhang H., Friedrich K. |
| 4470 - THREE DIMENSIONAL CRACK DETECTION IN HARDENED CEMENT PASTES USING SYNCHROTRON-BASED COMPUTER MICROTOMOGRAPHY | |
| Trtik P., van Mier J.G.M., Stampanoni M. |
| 4490 - OBTAINING THE CONSTITUTIVE TENSILE RELATION OF CONCRETE THROUGH INVERSE ANALYSIS | |
| Antunes de Oliveira e Sousa J.L., Gettu R., Sergey Razorenov |
| 4499 - FAILURE MECHANISMS OF HENS’ EGGS | |
| Hancock J., MacLeod N., Bain M., Solomon S., Hancock J. |
| 4502 - APPLICATION OF HYBRID CELLULAR AUTOMATA APPROACH FOR COMPUTER-AIDED EXAMINATION AND FORECAST OF STRENGTH PROPERTIES OF HETEROGENEOUS COAL BEDS | |
| Shilko E., Zavsek S., Pezdic J., Dmitriev A., Dimaki A.V. |
| 4503 - MECHANICAL PROPERTIES OF MEMS STRUCTURES | |
| Dual J., Simons G., Villain J., Weippert C. |
| 4508 - NUMERICAL AND PHYSICAL EXPERIMENTS ON SHEAR BANDING IN SANDSTONE | |
| Labuz J.F., Fakhimi A. |
| 4529 - APPLICATION OF A GRADIENT DUCTILE DAMAGE MODEL TO METAL FORMING PROCESSES INCLUDING CRACK PROPAGATION AND MESH ADAPTIVITY | |
| Mediavilla J., Peerlings R.H.J., Geers M.G.D, U. Kivisäkk |
| 4553 - FRACTURE IN TWO DIMENSIONS : ACOUSTIC EMISSION STUDIES AND THEORETICAL LESSONS | |
| Alava M., Salminen L., Rosti J., Pulakka J. |
| 4579 - VALIDATION OF MASSIVELY PARALLEL SIMULATIONS OF DYNAMIC FRACTURE AND FRAGMENTATION OF BRITTLE SOLIDS | |
| Arias I., Knap J., Chalivendra V.B., Hong S., Ortiz M., Rosakis A.J. |
| 4583 - IN-SITU X-RAY MICROXRAY DIFFRACTION STUDY OF SIGLE SLIP CONDITIONED COPPER POLYCRYSTALS DURING UNIAXAL DEFORMATIONS | |
| Joo H.D., Kim J.S., Bark C.W., Kim J.Y., Koo Y.M., Tamura N. |
| 4596 - EFFECT OF SURFACE ROUGHNESS OF SUBSTRATE ON FATIGUE STRENGTH OF THERMALLY SPRAYED STEEL WITH SELF-FLUXING ALLOY | |
| Akebono H., Komotori J., Shimizu M., Fukumoto M. |
| 4599 - FATIGUE PROPERTIES OF TITANIUM ALLOY, STAINLESS STEEL AND ALUMINUM ALLOY TREATED WITH FINE PARTICLE BOMBARDMENT | |
| Kameyama Y., Akebono H., Komotori J., Shimizu M. |
| 4601 - EFFECT OF DENSIFICATION ON CRACK INITIATION IN VICKERS INDENTATION TEST | |
| Kato Y., Yamazaki H., Yamamoto S., Yoshida S., Matsuoka J. |
| 4621 - THE COHESIVE SEGMENTS METHOD FOR THE SIMULATION OF FRACTURE | |
| Remmers J., de Borst R., Needleman A. |
| 4630 - FITNESS FOR PURPOSE ASSESSMENT OF A STRUCTURAL ALUMINIUM RAILWAY CAR BODY COMPONENT | |
| Luke M., Blauel J.G., Schendera C. |
| 4633 - FRACTURE TOUGHNESS OF AISI D6 TOOL STEEL AS RECEIVED AND WITH TREATMENT | |
| Bressan J.D., Kohls D., Tramontin A. |
| 4638 - MODELLING CREEP BEHAVIOR OF A DIRECFTIONALLY SOLIDIFIED NICKEL BASED SUPERALLOY | |
| Ibañez A., Saxena A., Kang J. |
| 4647 - SURFACES FORMED BY SUBCRITICAL CRACK GROWTH IN SILICATE GLASSES | |
| Wiederhorn S.M., Guin J.-P. |
| 4656 - FRACTURE BEHAVIOR OF SILICATE GLASSES NEAR THEIR FATIGUE LIMIT | |
| Guin J.-P., Wiederhorn S. |
| 4659 - A CONTRIBUTION TO ASSESSMENT OF STEAM GENERATOR TUBES INTEGRITY | |
| Tonkovic Z., Skozrit I., Soric J. |
| 4679 - ROLE OF STRAIN-ASSISTED TRANSPORT OF HYDROGEN ON THE INTERGRANULAR FRACTURE OF NICKEL BASE ALLOYS | |
| Chêne J., Brass A.-M. |
| 4689 - VOID GROWTH IN FCC AND BCC SINGLE CRYSTALS | |
| Kysar J.W., Gan Y.X. |
| 4692 - A DYNAMIC VOID GROWTH MODEL | |
| Liu J., Zhang Z., Thaulow C., Elena Pavlyonkova, Anastasiya Artemyeva |
| 4705 - ATOMISTIC BASIS OF FRACTURE IN MATERIALS | |
| Mecholsky J.J. Jr. |
| 4708 - A MULTI-SCALE APPROACH FOR THE SIMULATION OF CRACKS | |
| Wyart E., Martiny P., Remacle J.-F., Pardoen T., Lani F. |
| 4710 - A DISCRETE FRACTURE APPROACH FOR DIFFUSION/COUPLED ANALYSIS WITH CRACKS AND DISCONTINUITIES | |
| Segura J.M., Carol I., Samual McDonald, Paul Mummery |
| 4733 - THE EFFECT OF WARM SHOT PEENING ON THE FATIGUE PERFORMANCE OF A SAE 5160 SPRING STEEL | |
| Ruy M.C., Tarpani J.R., Milan M.T., Spinelli D., Bose W.W. |
| 4772 - CRACK AND DELAMINATION RISK EVALUATION OF THIN SILICON BASED MICROELECTRONICS DEVICES | |
| Auersperg J., Vogel D., Michel B. |
| 4783 - RESIDUAL STRESSES IN A TWO PHASE CONCENTRIC CYLINDER CONFIGURATION | |
| Colpo F., Humbert L., Botsis J. |
| 4787 - COMPUTATIONAL MICROMECHANICS OF SPHERE-REINFORCED COMPOSITES | |
| Llorca J., Segurado J., González C. |
| 4800 - FRACTURE TOUGHNESS IN ADVANCED MONOLITHIC CERAMICS –SEPB VERSUS SEVNB METHODS– | |
| Choi S. R., Gyekenyesi J. P. |
| 4824 - ANOMOLOUS FATIGUE CRACK GROWTH PHENOMENA IN HIGH-STRENGTH STEEL | |
| Forth S.C., James M.A., Johnston W.M., Newman J.C. Jr. |
| 4844 - SIZE EFFECT OF CONCRETE UNDER UNIAXIAL AND FLEXURAL COMPRESSION | |
| Gamino A.L., Borges J.U.A, Bittencourt T.N. |
| 4886 - TIME-DEPENDENT INTERGRANULAR BRITTLE FRACTURE | |
| McMahon C.J. Jr. |
| 4887 - EFFECTS OF NON-LINEAR WEAKENING ON EARTHQUAKE SOURCE SCALINGS | |
| Ampuero J.-P. |
| 4888 - FRETTING FATIGUE INVESTIGATION OF DOVETAIL | |
| Naboulsi S., Calcaterra J. |
| 4904 - EFFECTS OF MATERIAL GRADATION ON THE DYNAMIC STRESS INTENSITY FACTORS | |
| Zhang C., Sladek J., Sladek V. |
| 4936 - EFFECT OF SIZE OF COATING DEFECT ON FATIGUE PROPERTIES OF STEEL THERMALLY SPRAYED WITH NI-BASED SELF-FLUXING ALLOY | |
| Nishimori H., Akebono H., Komotori J., Shimizu M. |
| 4937 - FRACTURE AND FAILURE ANALYSIS OF STONE CLADDING ON BUILDING FACADES | |
| Chau K.T., Shao J.F., Martin Petrenec, Jiri Dluhos, Karel Obrtlík, Jaroslav Polak |
| 4947 - COMPARISON OF TWO CREEP CRACK GROWTH PARAMETERS, C* AND Q*, WITH F.E. ANALYSIS | |
| Yatomi M., Nikbin K.M., Yokobori A.T. Jr. |
| 4952 - CREEP CRACK GROWTH PROPERTIES OF WELDED JOINTS FOR HIGH CR FERRITIC STEEL | |
| Tabuchi M., Ha J., Yokobori T.A. Jr. |
| 4996 - A STUDY OF THE FRACTURE BEHAVIOR, DEFORMATION MECHANISMS, MICROSTRUCTURES, AND DUCTILITY OF PRECIPITATION STRENGTHENED ALUMINUM-LITHIUM ALLOYS | |
| Fragomeni J.M. |
| 4997 - COUPLED ATOMISTIC-CONTINUUM ANALYSIS OF NANOWIRES AND NANOFILMS | |
| Zimmerman J., Klein P. |
| 5002 - FRACTURE IN MULTIPHASE PARTICULATE MATERIALS: LATTICE MODELING ISSUES | |
| Bolander J.E., Yip M. |
| 5029 - THE EFFECT OF MULTI-AXIAL STRESS COMPONENT ON CREEP CRACK GROWTH RATE CONCERNING STRUCTURAL BRITTLENESS | |
| Yokobori A.T. Jr., Sugiura R., Tabuchi M., Fuji A., Adachi T., Yokobori T. |
| 5031 - THE EFFECT OF HYDROGEN DIFFUSION BEHAVIOR ON THE EMBRITTLEMENT OF STEEL UNDER HYDROGEN ATMOSPHERIC CONDITION | |
| Yokobori A.T. Jr., Wada Y., Iwadate T., Yamada K., Ohmi T. |
| 5032 - THE CHARACTERISTICS OF CORROSION FATIGUE CRACK GROWTH RATE FOR THE PETROLEUM REFINING PRESSURE VESSEL MATERIALS – THE EFFECT OF HYDROGEN EMBRITTLEMENT– | |
| Taketomi S., Yokobori A.T. Jr, Takei K., Wada Y..Tanaka Y., Iwadate T. |
| 5041 - EVALUATION OF STRESS INTENSITY FACTORS AND T-STRESS IN FUNCTIONALLY GRADED MATERIALS USING THE INTERACTION INTEGRAL METHOD | |
| Kim J.-H., Paulino G.H. |
| 5045 - NONLOCAL DAMAGE THEORIES BASED ON BALANCES OF MATERIAL FORCES | |
| Stumpf H., Makowski J., Hackl K. |
| 5050 - INVERSE ESTIMATES OF FRACTURE MODEL PARAMETERS | |
| Iacono C., Sluys L., van Mier J. |
| 5078 - IDEAL SHEAR STRENGTHS AND BOND DIRECTIONALITY OF FCC and BCC METALS | |
| Ogata S., Li J., Shibutani Y., Yip S. |
| 5083 - COHESIVE ZONE-BASED MODELLING OF Si/Si AND SiO2/ SiO2 INTERFACES IN THE PRESENCE OF A DUCTILE INTERLAYER | |
| Bertholet Y., Raskin J.-P., Pardoen T. |
| 5111 - VECTOR LEVEL SETS FOR CRACKS IN PARTITION OF UNITY METHODS | |
| Ventura G., Budyn E., Xu J.X., Belytschko T. |
| 5114 - STRAIN HISTORY EFFECTS ON FRACTURE MECHANICS PARAMETERS | |
| Ernst H.A., Bravo R.E., Villasante J.A., Izquierdo A. |
| 5131 - A COMPUTATIONAL STUDY OF THE FRACTURE BEHAVIOUR OF CONCRETE IN A MODIFIED SPLIT HOPKINSON BAR TEST | |
| Pedersen R., Sluys L., Weerheijm J., Simone A., M. Tkachenko |
| 5133 - NANODAC – A METHOD FOR FRACTURE MECHANICAL CHARACTERIZATION ON THE NANOSCALE | |
| Keller J., Vogel D., Michel B. |
| 5139 - MODELING DAMAGE LINKAGE IN HETEROGENEOUS ALLOYS AND METAL MATRIX COMPOSITES | |
| Wilkinson D. S., Gammage J., Embury D., Brechet Y. |
| 5153 - NEAR-TIP ASYMPTOTIC ANALYSIS OF A PKN FLUID-DRIVEN FRACTURE WITH NON-LOCAL ELASTICITY EQUATION | |
| Adachi J.I., Peirce A.P. |
| 5160 - ANALYSIS OF THE BOND BETWEEN NEAR-SURFACE MOUNTED CFRP LAMINATE STRIPS AND CONCRETE | |
| Sena-Cruz J., Barros J., Azevedo A. |
| 5162 - DYNAMIC ESHELBY TENSORS AND ASSOCIATED SOLUTION OF THE INHOMOGENEOUS HELMHOLTZ EQUATION FOR ELLIPSOIDAL INCLUSIONS | |
| Michelitsch T.M., Wang J., Gao H., Levin V.M. |
| 5168 - RATE DEPENDENT LOAD-DEFORMATION RELATION FOR CONCRETE UNDER IMPACT TENSILE LOADING | |
| Weerheijm J., Lyudmila Derevyagina, Antonina Gordienko, Dariana Tagiltseva |
| 5183 - CORROSION RESISTANCE OF TI-6AL-4V ALLOY FINISHED BY AN ADVANCED ELID GRINDING SYSTEM | |
| Mizutani M., Komotori J., Katahira K., Ohmori H. |
| 5187 - SEQUENTIALLY LINEAR SAW-TOOTH MODELLING OF REINFORCED STRUCTURES | |
| Rots J.G., Invernizzi S. |
| 5193 - FRACTURE TOUGHNESS OF SNOW: SIZE EFFECTS IN A QUASI-BRITTLE MATERIAL | |
| Sigrist C., Schweizer J., Schindler H.-J., Dual J. |
| 5195 - INFLUENCE OF THE MATERIAL MESO-STRUCTURE ON 2D AND 3D LATTICE RESPONSE | |
| Lilliu G., van Mier J.G.M. |
| 5205 - ANALYSIS OF THE K-DOMINANCE CONDITION IN HYDROGEN ASSISTED CRACKING | |
| Toribio J., Kharin V. |
| 5206 - THREE-DIMENSIONAL CHARACTERIZATION OF CONSTITUTIVE BEHAVIOR AND FAILURE OF TEXTILE COMPOSITES | |
| Daniel I.M., Abot J.L., Luo J.-J., Schubel P.M., G. Gray, M. Zocher |
| 5207 - APPLICATION OF CTOA/CTOD IN THE RESIDUAL STRENGTH ANALYSIS OF BUILT-UP AND INTEGRAL STRUCTURES | |
| Seshadri B.R., Forth S.C., Johnston W.M. Jr., Domack M.S. |
| 5219 - CALCULATION OF NANO-CRYSTALLINE COPPER TOUGHNESS USING THE EMBEDDED ATOM METHOD | |
| Aldazabal J., Luque A., Martinez-Esnaola J.M., Gil Sevillano J. |
| 5222 - THREE-DIMENSIONAL MICROSTRUCTURE VISUALIZATION AND FINITE ELEMENT MODELING OF THE MECHANICAL BEHAVIOR OF HETEROGENEOUS MATERIALS | |
| Chawla N., Ganesh V.V., Martin Juliš, Tomáš Podrábský, Tomáš Kruml |
| 5224 - INTERACTION OF DYNAMIC CRACKS WITH INCLINED INTERFACES | |
| Chalivendra V.B., Hong S., Rosakis A.J., Arias I., Knap J., Ortiz M. |
| 5284 - A CRITICAL SHEAR STRAIN CRITERION FOR THE DUCTILE –BRITTLE TRANSITION IN HY100 STEEL UNDER MIXED MODE I & II LOADING | |
| Bhattacharjee D., Knott J.F. |
| 5315 - ANALYSIS OF A FULL-SCALE BLAST TEST AND RETROFIT DESIGN | |
| Maji A.K., Brown J.P., Giuseppe Lacidogna, Alberto Carpinteri |
| 5321 - DAMAGE AND DISCRETE CRACK PROPAGATION MODELLING – SOME RESULTS AND CHALLENGES FOR 2D AND 3D CONFIGURATIONS | |
| Bouchard P.-O., Håkan Brodin, Sten Johansson, Lars Östergren, Xin-Hai Li |
| 5322 - APPLICATION OF DISCRETE STOCHASTIC FRACTURE NETWORKS FOR MODELLING OF GROUNDWATER FLOW | |
| Severin O., Maryska J., Vohralík M. |
| 5328) MESOMECHANICAL ASPECTS OF THIN FILM FRACTURE | |
| Panin A.V., Shugurov A.R., Schreiber J., N.E. Pirogova |
| 5354 - IN-PLANE AND OUT-OF-PLANE CONSTRAINT EFFECTS IN THREE-DIMENSIONAL ELASTIC PERFECTLY-PLASTIC CRACK TIP FIELDS | |
| Yusof F., Hancock J.W. |
| 5355 - NEW SCHEMES FOR COMPUTATIONAL MODELLING OF SIZE-DEPENDENT CONICAL INDENTATION | |
| Cao Y., Lu J. |
| 5385 - DYNAMICS AND STRUCTURE OF INTERFACIAL CRACK FRONT | |
| Måløy K.J., Toussaint R., Schmittbuhl J. |
| 5387 - MECHANICS MODELS FOR HYDROGEN EMBRITTLEMENT MECHANISMS | |
| Liang Y., Sofronis P., Dodds R.H. Jr., Aravas N. |
| 5419 - A MODIFIED RELAXATION-MODEL FOR THE PREDICTION OF RESIDUAL STRESSES IN TWO-DIMENSIONAL ROLLING/SLIDING CONTACT | |
| Foletti S., Desimone J. |
| 5430 - INFLUENCE OF THE LOADING RATE ON THE CONCRETE CONE FAILURE | |
| Ozbolt J. |
| 5441 - MIXED MODE FRACTURE IN CONCRETE AND MASONRY | |
| Alfaiate J., Sluys L.J., Pires E.B. |
| 5445 - ASSESSMENT OF METHODS TO DETERMINE FRACTURE TOUGHNESS OF POLYMERS IN THE DUCTILE-TO-BRITTLE TRANSITION REGION | |
| Cocco R.G., Frontini P.M., Perez Ipiña J.E. |
| 5454 - DEVELOPMENT OF ACCEPTANCE/REJECTION CRITERIA FOR REQUALIFICATION OF HIGH PRESSURE GAS CYLINDERS | |
| Rana M.D., Smith J.H. |
| 5457 - INFLUENCE OF RESIDUAL STRESSES ON BRITTLE FRACTURE OF FERRITIC STEELS | |
| Mirzaee Sisan A., Truman C.E., Smith D. J. |
| 5466 - FRACTURE ROUGHNESS FOR THE TWO-DIMENSIONAL CENTRAL FORCE MODEL | |
| Bakke J.Ø.H., Ramstad T., Hansen A |
| 5472 - DIFFUSION AND STRAIN-ASSISTED TRANSPORT AND TRAPPING OF HYDROGEN IN FERRITIC STEELS | |
| Brass A.-M., Chêne J. |
| 5474 - ON THE FRACTURE TOUGHNESS OF FERROELECTRIC CERAMICS WITH ELECTRIC FIELD APPLIED PARALLEL TO THE CRACK FRONT | |
| Landis C.M., Wang J. |
| 5476 - EFFECT OF SHOT PEENING ON THE FATIGUE ENDURANCE AND FATIGUE CRACK GROWTH RATE OF 7050 & 7075 ALUMINUM ALLOYS | |
| Locke J.E., Kumar B., Salah L. |
| 5479 - CRACK PROPAGATION IN RUBBER-LIKE MATERIALS | |
| Heinrich G., Horst T., Struve J., Gerber G. |
| 5480 - NON-LINEAR SLIP-WEAKENING IN A ROTARY GOUGE FRICTION EXPERIMENT | |
| Chambon G., Schmittbuhl J., Corfdir A. |
| 5481 - DOES ELASTIC REBOUND THEORY APPLY TO SEISMIC FAULTS? | |
| Ziv A., Cochard A., Schmittbuhl J. |
| 5482 - CORRELATIONS OF STRESS DISTRIBUTIONS ALONG THE FAULT: FROM LABORATORY FRACTURE ROUGHNESS TO FAULT ASPERITY SQUEEZE | |
| Schmittbuhl J., Chambon G., Hansen A., Bouchon M. |
| 5484 - DISCRETE MODELS OF INTERFACE DAMAGE | |
| Haussy B., Ganghoffer J.F., Mandana Arzaghi, Christine Sarrazin-Baudoux, Jean Petit |
| 5487 - ASR-SENSITIVE SLOW-LATE-AGGREGATES; MACRODAMAGE AND MICROSTRUCTURE | |
| Stark J., Berninger A.M., Freyburg E. |
| 5492 - MIXED MODE FRACTURE IN RECONSTRUCTED ACETABULUM | |
| Tong J., Wong K.Y. |
| 5503 - FRACTURE, PERMANENT DEFORMATION AND STRUCTURE CHANGE IN OXIDE GLASSES | |
| Matsuoka J. |
| 5504 - CRACKING IN NANOSTRUCTURED Li-BATTERIES | |
| Aifantis K.E., Dempsey J.P. |
| 5518 - PROPERTIES AND FRACTURE OF TUNGSTEN-ALUMINA ATOMIC LAYER DEPOSITED NANOLAMINATES | |
| Jungk J.M., Moody N.R., Mayer T.M., Wind R.A., George S.M., Gerberich W.W. |
| 5520 - ACTION OF WATER COOLED COPPER END CHILLS DURING SOLIDIFICATION ON FRACTURE BEHAVIOR OF ALUMINUM ALLOY/QUARTZ MMCs | |
| Hemanth J., Zinoviy Nazarchuk, Denys Rudavskyy, Oleg Sergiyenko |
| 5522 - FRACTURE MECHANISMS AND DUCTILITY AT HIGH TEMPERATURES OF A CARBON STEEL | |
| Calvo J., Cabrera J. M., Prado J. M. |
| 5523 - MODELLING OF MASONRY CREEP AND DAMAGE | |
| Pina-Henriques J., Lourenço P.B., Krakowiak K.J. |
| 5529 - TIME DISCONTINUOUS GALERKIN METHOD FOR DYNAMIC CRACK GROWTH USING X-FEM | |
| Réthoré J., Gravouil G., Combescure A. |
| 5533 - A COUPLED ELASTO-PLASTIC MICROPORE DAMAGE MODEL FOR LOW CYCLE FATIGUE ANALYSES OF DUCTILE METALS AT FINITE STRAINS | |
| Hommel J.-H., Kintzel O., Meschke G. |
| 5548 - SIMPLE METHOD FOR ESTIMATION OF FATIGUE LOADING AND USEFUL LIFE FROM FRACTURE MORPHOLOGY | |
| Pokluda J., Sandera P. |
| 5553 - NON-LINEAR FRACTURE MECHANICS APPLIED TO WOOD IN MODE I | |
| Coureau J.-L., Morel S. |
| 5569 - DAMAGE AND CREEP DEFORMATION IN BRITTLE ROCKS | |
| Shao J.-F., Chau K.T., Feng X.T. |
| 5577 - EFFECT OF RESIDUAL STRESSES DUE TO LASER WELDING ON THE STRESS INTENSITY FACTORS OF ADJACENT CRACK | |
| Labeas G., Tsirkas S., Diamantakos J., Kermanidis A. |
| 5582 - THREE-DIMENSIONAL CRACK GROWTH SIMULATION:COMPUTATIONAL ASPECTS AND ANALYSIS OF CRACK TUNNELING TO QUANTIFY COD AS A FUNCTION OF CONSTRAINT | |
| Sutton M.A., Deng X., Zuo J. |
| 5586 - HAMILTONIAN FORMALISMS IN ELASTICITY - POTENTIAL USE FOR FRACTURE MECHANICS | |
| Li J., Recho N. |
| 5589 - FRACTURE OF SILICA AEROGELS: EFFECTS OF SURFACE NATURE ON CRACK PROPAGATION | |
| Despetis F., Etienne P., Etienne-Calas S., Phalippou J. |
| 5594 - CHARACTERIZATION OF CREEP BEHAVIOR OF CRACK IN NON-HOMOGENEOUS MATERIALS | |
| Tu S.-T., Xuan F.-Z., Chen J.-J. |
| 5598 - TIME SCALING FOR DYNAMIC SPALL FRACTURE | |
| Pluvinage G., Jeong J., Bouzid S. |
| 5600 - BOUNDARY INTEGRAL FRACTURE ANALYSIS AND HYPERSINGULAR EVALUATION | |
| Salvadori A., Phan A.-V., Gray L. J. |
| 5607 - CONDITIONS ON COHESIVE LAWS IN COHESIVE ZONE FRACTURE MODELS | |
| Jin J.-H., Sun C.T. |
| 5620 - SPECTRAL ELEMENT SIMULATION OF RUPTURE DYNAMICS | |
| Villote J.P., Festa G. |
| 5626 - FATIGUE OF BRIDGING CERAMICS: UNDERSTANDING CRACK SIZE EFFECTS | |
| Kruzic J. J., Cannon R.M., Ritchie R.O. |
| 5627 - THERMAL LAP SHEAR TESTS ON MEMS INTERCONNECTED SOLDER | |
| Vogel J., Faust W., Dudek R., Michel B., Dost M. |
| 5649 - EVOLUTION OF DAMAGE ACCUMULATION IN LOW-CARBON STEEL IN TENSION CONDITION | |
| Tyutin M.R., Botvina L.R., Zharkova N.A., Petersen T.B., Hudson J.A. |
| 5651 - FRACTURE CHARACTERISTICS OF TWO CARBON FIBRE REINFORCED CERAMICS | |
| Dusza J., Liedke V., Semerad E., Weiss R. |
| 5659 - BRAZILIAN TEST OF CONCRETE EVALUATED BY AE | |
| Reinhardt H.-W., Finck F., Grosse C., Kurz J. |
| 5680 - SIZE DEPENDENCE OF MECHANICAL PROPERTIES OF GOLD AT THE MICRON SCALE | |
| Nix W.D., Greer J.R., Oliver W.C. |
| 5682 - LOW CYCLE FATIGUE BEHAVIOUR OF RAILWAY WHEEL STEELS INCLUDING TEMPERATURE EFFECTS | |
| Ahlström J., Karlsson B., Mirsch M. |
| 5698 - TIME VS. CYCLE DEPENDENCE OF EX VIVO FATIGUE IN HUMAN CORTICAL BONE | |
| Ritchie R.O., Nalla R.K., Kruzic J.J., Kinney J.H. |
| 5705 - THE EXTENDED FINITE ELEMENT METHOD FOR STATIC AND DYNAMIC PROBLEMS | |
| Belytschko T., Areias P., Wang H.W., Xu J.X. |
| 5712 - LOCAL SECOND GRADIENT MODELS AND DAMAGE MECHANICS: APPLICATION TO CONCRETE | |
| Kotronis P., Chambon R., Mazars J., Collin F. |
| 5722 - CRACK LENGTH DETERMINATION DIFFICULTIES IN COMPOSITES- THEIR EFFECT ON TOUGHNESS EVALUATION | |
| Blackman B.R.K., Williams J.G., M. Benguediab |
| 5729 - EXPERIMENTAL DETERMINATION OF CRACK DRIVING FORCES IN INTEGRATED STRUCTURES | |
| He J., Xu G., Suo Z., Yinghua Li |
| 5730 - THE EFFECT OF MULTI SCALE DOMINATING REGION ON BRITTLE FRACTURE | |
| Yokobori A.T. Jr. |
| 5737 - A COUPLED DISLOCATION-HYDROGEN BASED MODEL OF INELASTIC DEFORMATION | |
| Bammann D. J., Sofronis P. |
| 5740 - EXPERIMENTAL DETERMINATION OF THE CRITICAL CRACK TIP OPENING ANGLE USING THE CTOD d5 MEASUREMENT TECHNIQUE | |
| Heerens J., Schödel M., Schwalbe K.-H. |
| 5743 - RESIDUAL STRENGTH ANALYSIS USING CTOA CRITERIA FOR FUSELAGE STRUCTURES CONTAINING MULTIPLE SITE DAMAGE | |
| Hsu C.-L., Tom J.J., Anderson B.L. |
| 5753 - CRACK GROWTH CHARACTERISTICS AND DAMAGE IN 12Cr STEEL UNDER HIGH TEMPERATURE CREEP AND CREEP-FATIGUE CONDITIONS | |
| Yokota O., Sugiura R., Yoda M., Yokobori A.T. Jr., Yokobori T. |
| 5758 - THE DRIVING FORCE FOR INDENTATION CRACKING IN GLASSES | |
| Rouxel T., Shang H., Sangleboeuf J.-C. |
| 5761 - FATIGUE LIFE EVALUATION OF WELDED JOINTS BASED ON NOMINAL STRESS AND FINITE ELEMENT ANALYSIS | |
| Goo B.C., Yang S.Y., Seo J.W. |
| 5764 - CAVITATION AND FRACTURE OF SOFT ADHESIVES | |
| Creton C., Chiche A., Dollhofer J., Roos A., Hui C.Y., Muralidharan V. |
| 5765 - ON THE BRITTLENESS OF BULK METALLIC GLASSES | |
| Keryvin V., Bernard C., Sangleboeuf J.-C., Yokoyama Y., Rouxel T. |
| 5788 - EXPERIMENTS ON DYNAMIC SLIP | |
| Lim J., Ravi-Chandar K. |
| 5828 - MICRO-MACRO SCALING IN DISORDERED MATERIALS | |
| van Mier J.G.M. |