| OVERVIEW ON FAILURE INVESTIGATION: FATIGUE AND STRESS-CORROSION CRACKING ON IAF FLEET | |
| F. Bagnoli, L. Allegrucci |
General Papers
| 3023 - EXPERIMENTAL INVESTIGATIONS AND MODELING OF BOND BETWEEN ROUND STRAND ROPES AND CONCRETE | |
| Avak R., Wille F., Javier Belzunce |
| 3099 - SIMULATION OF IMPACT AND FRAGMENTATION WITH THE MATERIAL POINT METHOD | |
| Banerjee B., Guilkey J. E., Harman T.B., Schmidt J.A., McMurtry P.A. |
| 3144 - FLAW TOLERANT BULK AND SURFACE NANOSTRUCTURES OF BIOLOGICAL SYSTEMS | |
| Gao H., Ji B., Buehler M.J., Yao H. |
| 3166 - STRENGTH AND STABILITY OF NANOOBJECTSE | |
| Morozov N.F., Ivanova E.A., Krivtsov A.M., Semenov B.N. |
| 3185 - STRESS ANALYSIS OF THIN ADHESIVE BONDING DISSIMILAR ADHERENDS SINGLE LAP JOINTS | |
| Fongsamootr T., Dechwayukul C., Alexey Babichev |
| 3228 - INFLUENCE OF CONTINUOUS NUCLEATION OF SECONDARY VOIDS UPON GROWTH AND COALESCENCE OF CAVITIES IN POROUS DUCTILE METALS | |
| Enakoutsa K., Leblond J.-B., Audoly B. |
| 3389 - WAVE SCATTERING AND THERMAL EFFECT OF CRACKED PIEZOELECTRIC MATERIALS | |
| Yu S.-w., Du N.-n., Gu B. |
| 3413 - NOTCH AND DEFECT SENSITIVITY UNDER ANY KIND OF FATIGUE LOADING: AN UNIFYING APPROACH | |
| Atzori B., Susmel L. |
| 3720 - DISLOCATION MODEL OF AN ASYMMETRIC WEAK ZONE FOR PROBLEMS OF INTERACTION BETWEEN CRACK-LIKE DEFECTS | |
| Simonov I.V., Karihaloo B.L., A.M. Podurets, Andru Malyshev |
| 3764 - PROGRESSIVE FAILURE ANALYSIS APPROACH FOR ESTIMATING MATERIAL FRACTURE TOUGHNESS | |
| Farahmand B., Hajjar F. |
| 3817 - ANALYSIS OF CHANGE MODE I STRESS INTENSITY FACTOR IN ELEMENTS WITH ANGULAR NOTCHES | |
| Tabanyukhova M.V., Kurbanov A. B., Pangaev V.V., W. Ecker |
| 3825 - INFLUENCE OF STRESS STATE AND TEMPERATURE ON THE STRENGTH OF EPOXY RESINS | |
| Fiedler B., Schulte K., Hobbiebrunken T., Hojo M. |
| 3845 - EXPERIENCES WITH SOME EUROPEAN FLAW ASSESSMENT PROCEDURES | |
| Zerbst U., Ainsworth B., B. González, J. Escuadra |
| 3975 - NUMERICAL SIMULATIONS OF CONSTRAINT AND SIZE EFFECTS IN FATIGUE CRACK GROWTH | |
| Wang B., Siegmund T. |
| 4027 - COMPARISON OF DOUBLE AND SINGLE BONDED REPAIRS TO SYMMETRIC COMPOSITE STRUCTURES: A NUMERICAL ANALYSIS | |
| Bachir Bouiadjra B., Belhouari M., Serier B., Ouinas D. |
| 4029 - NUMERICAL ANALYSIS OF THE CRACK DEFLECTION AT CERAMIC - METAL INTERFACE | |
| Belhouari M., Serier B., Bachir Bouiadjra B., Boutabout B. |
| 4030 - STUDY THERMAL RESIDUAL STRESSES IN A BI-MATERIAL CERAMIC-METAL: CASE OF THE BOTH AG/AL2O3 AND PT/AL2O3. | |
| Boutabout B., Serier B., Bachir Bouiadjra B., Belhouari M., Haddouri K. |
| 4066 - MATERIAL CHARACTERISATION AT THE MICRO SCALE THROUGH ON-CHIP TESTS | |
| Cacchione F., De Masi B., Corigliano A., Ferrera M. |
| 4074 - THE EFFECT OF CYCLIC BENDING STRAINS ON THE BEHAVIOR OF SUPERELASTIC NICKEL-TITANIUM WIRES AND ENDODONTIC INSTRUMENTS | |
| Bahia M.G.A., Dias R.F., V.T.L. Buono |
| 4105 - ISO-CONTOUR MAPS FOR BALLISTIC PERFORMANCE OF THICK METALLIC ARMOUR | |
| Srivathsa B., Ramakrishnan N. |
| 4108 - IMPACT-DYNAMIC BEHAVIOUR OF AL-TRIP STEEL | |
| Verleysen P., Van Slycken J., Degrieck J., De Cooman B.C., Samek L. |
| 4111 - PERFORMANCE OF RC BEAMS RETROFITTED WITH CARDIFRC AFTER THERMAL CYCLING | |
| Farhat F.G., Karihaloo B.L, Fathi Darwish, Marcos Pereira |
| 4122 - A GENERAL FORMULATION OF THE POTENTIAL ENERGY RELEASE RATE FOR A THREE-DIMENSIONAL HYPERELASTIC BODY CONTAINING A PLANE CRACK | |
| Chiarelli M., Troiani E., Angelika Brueckner-Foit |
| 4136 - NUMERICAL ANALYSIS OF INTERFACE FRACTURE IN TWO LAYER COMPOSITES UNDER MIXED MODE LOADING | |
| Figiel L., Lauke B., Victor Sergeev, Alfred Sungatulin, Mark Kalashnikov, Victor Panin |
| 4167 - STATICALLY ADMISSIBLE STRESS RECOVERY FOR CRACK PROBLEMS | |
| Xiao Q.-Z., Karihaloo B.L., V.A. Voloshyn |
| 4178 - CHARACTERIZATION OF STRESS CORROSION CRACKING IN AA2024-T3 BY X-RAY RADIOGRAPHY | |
| Liu X., Frankel G.S., Zoofan B. |
| 4195 - ENGINEERING ASPECTS ON FATIGUE CRACK GROWTH UNDER COMPLEX LOADING | |
| Nilsson F., Olsson M., Alfredsson B. |
| 4207 - DESIGN OF FASTENINGS BASED ON THE FRACTURE MECHANICS | |
| Eligehausen R., Ozbolt J., Bohdan Klym, Valentin Skalsky, Sergey Builo |
| 4210 - A HYBRID WEIGHT FUNCTION APPROACH FOR THE COMPUTATION OF STRESS INTENSITY FACTOR IN ELLIPTICAL AND SEMI-ELLIPTICAL CRACKS | |
| Hachi B.K., Rechak S., Belkacemi Y., Haboussi M. |
| 4237 - FATIGUE CRACK GROWTH IN WELDED RAILS | |
| Ringsberg J.W., Josefson B.L., Skyttebol A. |
| 4255 - FATIGUE PERFORMANCE OF SANDWICH COMPOSITES | |
| Shafiq B., Quispitupa A., Just F. |
| 4265 - LOCALIZED CHEMICAL ENVIRONMENTS AND THE IMPLICATIONS ON FATIGUE IN AIRCRAFT STRUCTURES | |
| Kelly R.G., Oscar Borla, Giuseppe Lacidogna, Amedeo Manuello Bertetto |
| 4354 - DEFORMATION BEHAVIOR IN MATERIALS SUSCEPTIBLE TO HYDROGEN EMBRITTLEMENT | |
| Nibur K., Bahr D.F., Somerday B.P. |
| 4428 - A COMBINED SIMULATIVE AND EXPERIMENTAL APPROACH TO RELIABILITY OPTIMIZATION OF MEMS | |
| Wittler O., Keller J., Vogel D., Michel B. |
| 4459 - ROUGHNESS OF BRITTLE CRACK INTERFACES IN BUCKLING BEAM LATTICES | |
| Skjetne B., Helle T., Hansen A. |
| 4471 - APPROPRIATE EXTENDED FUNCTIONS FOR X-FEM SIMULATION OF PLASTIC FATIGUE CRACK GROWTH | |
| Elguedj T., Gravouil A., Combescure A., Angelika Brueckner-Foit |
| 4476 - SHORT CRACK PROPAGATION IN DUPLEX STEEL – MODELLING AND EXPERIMENTAL VERIFICATION | |
| Künkler B., Fritzen C.P., Düber O., Krupp U., Christ H.J. |
| 4561 - ENVIRONMENTAL-ASSISTED FATIGUE CRACKING OF ALUMINIUM ALLOYS AT DIFFERENT FREQUENCIES | |
| Stanzl-Tschegg S.E., Holper B., Mayer H., Zengliang Gao |
| 4568 - CONSTITUTIVE MODELS AND STRAIN LOCALIZATION IN POROUS SANDSTONE | |
| Issen K.A., Challa V., Giuseppe Lacidogna, Amedeo Manuello Bertetto, Alberto Carpinteri |
| 4675 - NANOMACHINING FOR HIGH-RESOLUTION SCANNING OF MAMMALIAN BRAIN MICRO STRUCTURE | |
| Wiercigroch M., McCormick B.H., Mayerich D.M. |
| 4697 - NANOSCALE STRAIN LOCALIZATION: THE INSTABILITY OF STRAINIONS | |
| Chiaia B., Ferro G. |
| 4699 - CRACK INITIATION IN ENGINEERING THERMOPLASTICS RESULTING FROM CHEMICAL DEGRADATION | |
| Choi B.H., Zhou Z., Chudnovsky A., Sehanobish K. |
| 4701 - STRESS CORROSION CRACK GROWTH IN ENGINEERING PLASTICS | |
| Choi B.H., Zhou Z., Chudnovsky A., Sehanobish K. |
| 4768 - FRACTURE AND FATIGUE BEHAVIOUR OF MEMS RELATED MICRO MATERIALS | |
| Walter H., Dudek R., Michel B. |
| 4772 - CRACK AND DELAMINATION RISK EVALUATION OF THIN SILICON BASED MICROELECTRONICS DEVICES | |
| Auersperg J., Vogel D., Michel B. |
| 4778 - ON THE INVESTIGATION OF MATERIAL STABILITY DURING THE SIMULATION OF DUCTILE DAMAGE IN METALLIC MATERIALS | |
| Reusch F., Svendsen B., K.A. Martynyak, Kostyantyn Chumak |
| 4805 - SIMULATION OF FATIGUE CRACK PROPAGATION IN DUCTILE METALS BY BLUNTING AND RE-SHARPENING | |
| Levkovitch V., Svendsen B., Sievert R. |
| 4786 - NON-LOCAL MODELING OF MATERIAL FORCES DURING DAMAGE AND FRACTURE | |
| Svendsen B., Reusch F., Stijn Hertelé, Rudi Denys |
| 4899 - CRACKING IN PLAIN CONCRETE: A MULTIFIELD APPROACH | |
| Secchi S., Schrefler B.A., Simoni L. |
| 4956 - FAILURE ANALYSIS OF THE SUSPENSION SPRING OF A LIGHT DUTY TRUCK | |
| Eryürek B., Ereke M., Göksenli A., Jordi Romeu |
| 4975 - MORPHOLOGICAL STABILITY OF MULTILAYER SYSTEMS | |
| Sridhar N., Anderson P.M., Misra A., Cox B.N. |
| 4986 - ACQUISITION AND ANALYSIS OF SHORT-TERM CREEP CURVES FOR PREDICTION OF LONG -TERM ENGINEERING DESIGN DATA | |
| Wilshire B., Burt H. |
| 5005 - SERVICE PROBLEMS OF FRESH AIR FAN OF FOSSIL FUEL POWER PLANT - PART I CASE STUDY OF PRIMARY STAGE AIR FAN FAILURE | |
| Sijacki Zeravcic V., Bakic G., Djukic M., Andjelic B. |
| 5007 - DESTABILIZATION OF RETAINED AUSTENITE DURING MULTIPLE TEMPERING OF HIGH-SPEED W-Mo-V STEEL | |
| Andjelic B., Sijacki Zeravcic V., Djukic M., Bakic G. |
| 5010 - MODEL FOR TIME-TO-FRACTURE DETERMINATION OF LOW-ALLOYED STEEL UNDER CREEP CONDITIONS | |
| Bakic G., Sijacki Zeravcic V., Djukic M., Milanovic D., Andjelic B. |
| 5012 - MODEL OF INFLUENCING FACTORS FOR HYDROGEN DAMAGES OF BOILER EVAPORATOR TUBES | |
| Djukic M., Sijacki Zeravcic V., Bakic G., Milanovic D., Andjelic B. |
| 5082 PROBING THE NANOMECHANICAL PROPERTIES OF TEETH | |
| Lim C.T., Hairul Nizam B.R., Chng H.K., Yap A.U.J., Taoufik Boukharouba |
| 5084 - NANOINDENTATION STUDY OF NORMAL AND OSTEOPOROTIC BONES | |
| Lim C.T., Omar B.H.B., Goh J C.H. |
| 5133 - NANODAC – A METHOD FOR FRACTURE MECHANICAL CHARACTERIZATION ON THE NANOSCALE | |
| Keller J., Vogel D., Michel B. |
| 5149 - MODELLING OF FRACTURE FOR AUSTENITIC MATERIALS WITH FERRITIC PHASE ON THE BASIS OF LOCAL APPROACH | |
| Margolin B.Z., Shvetsova V.A., Kostylev V.I. |
| 5155 - CRACK PROPAGATION IN FUNCTIONALLY GRADED MICROPOROUS THERMOVISCOPLASTIC MATERIALS | |
| Love B.M., Batra R.C. |
| 5159 - DAMAGE EVOLUTION IN PLANE STRAIN DEFORMATIONS OF IMPACT LOADED SANDWICH PLATES | |
| Batra R.C., Love B.M. |
| 5186 - FRACTURE AND FATIGUE PROPERTIES OF Z-PINNED COMPOSITE LAP JOINTS | |
| Chang P., Mouritz A.P., Cox B.N. |
| 5207 - APPLICATION OF CTOA/CTOD IN THE RESIDUAL STRENGTH ANALYSIS OF BUILT-UP AND INTEGRAL STRUCTURES | |
| Seshadri B.R., Forth S.C., Johnston W.M. Jr., Domack M.S. |
| 5215 - DAMAGE TOLERANCE ISSUES PECULIAR TO SUPERSONIC CIVIL TRANSPORT AIRCRAFT | |
| Odemer G., Henaff G., Journet B., Remy L., Haddar N., Köster A. |
| 5267 - SELF-ASSEMBLED MONOLAYERS AND MODE-MIX DEPENDENT TRACTION-SEPARATION LAWS FOR INTRINSIC INTERFACIAL FRACTURE | |
| Liechti K.M., Mello A., A.A. Sirotin, Yu.K. Bivin, Kirill Osipenko |
| 5259 - OSCILLATING FRACTURE PATHS IN THIN BRITTLE SHEETS: WHEN GEOMETRY RULES CRACK PROPAGATION | |
| Basile A., Reis P.M., Roman B. |
| 5279 - FRACTURE BEHAVIOR OF BINARY BLOCK COPOLYMERS BLENDS | |
| Weidisch R., Staudinger U., Satapathy B., Lach R., Grellman W., Knoll K. |
| 5301 - HIGH CYCLE FATIGUE BEHAVIOUR OF WELDED JOINTS BASED ON NOTCH STRESS INTENSITY FACTORS | |
| Atzori B., Lazzarin P., Tovo R., Yuriy Sokolkin |
| 5321 - DAMAGE AND DISCRETE CRACK PROPAGATION MODELLING – SOME RESULTS AND CHALLENGES FOR 2D AND 3D CONFIGURATIONS | |
| Bouchard P.-O., Håkan Brodin, Sten Johansson, Lars Östergren, Xin-Hai Li |
| 5324 - LOCAL CRITERIA OF BRITTLE AND DUCTILE FRACTURE AND APPLICATION OF LOCAL APPROACH TO FRACTURE MECHANICS PROBLEMS | |
| Margolin B.Z., Gulenko A.G., Kostylev V.I., Shvetsova V.A. |
| 5330 - STUDY ON THE FRAGMENTATION OF SHELLS | |
| Wittel F. K., Kun F., Kröplin B.H., Herrmann H.J. |
| 5348 - MECHANISMS OF HYDROGEN-ASSISTED FRACTURE IN AUSTENITIC STAINLESS STEEL WELDS | |
| Somerday B.P., Balch D.K., Novak P., Sofronis P. |
| 5362 - PLASTICITY EFFECTS ON FATIGUE CRACK GROWTH AT HOLES | |
| McClung R.C., Gardner B.M., Lee Y.-D., McMaster F.J. |
| 5382 - MULTIPLE DELAMINATION OF LAMINATED STRUCTURES | |
| Andrews M., Massabo R., Cox B., Václav Veselý, Petr Frantík, Zbyn?k Keršner |
| 5410 - MODELING OF DYNAMIC FRAGMENTATION IN BRITTLE SOLIDS | |
| Gommerstadt B., Chudnovsky A. |
| 5415 - THREE-DIMENSIONAL MODELING OF STRONG DISCONTINUITIES IN ROCK | |
| Regueiro R.A., Oscar Borla |
| 5476 - EFFECT OF SHOT PEENING ON THE FATIGUE ENDURANCE AND FATIGUE CRACK GROWTH RATE OF 7050 & 7075 ALUMINUM ALLOYS | |
| Locke J.E., Kumar B., Salah L. |
| 5484 - DISCRETE MODELS OF INTERFACE DAMAGE | |
| Haussy B., Ganghoffer J.F., Mandana Arzaghi, Christine Sarrazin-Baudoux, Jean Petit |
| 5485 - MODELLING DAMAGE EVOLUTION IN LAMINATED COMPOSITES USING COHESIVE ZONE MODELS | |
| Rockwell Q.Y., Cox B., Philippe Van Bogaert |
| 5490 - CYCLIC DEFORMATION BEHAVIOUR OF DEEP ROLLED AND LASER-SHOCK PEENED AISI 304 STAINLESS STEEL AT ELEVATED TEMPERATURE | |
| Nikitin I., Altenberger I., Scholtes B. |
| 5526 - NUMERICAL LIMIT LOAD ANALYSIS OF PIPELINES WITH LOCAL WALL-THINNINGS | |
| Liu Y., Xu B., Chen G. |
| 5549 - CODE OF PRACTICE FOR CREEP CRACK GROWTH TESTING OF INDUSTRIAL SPECIMENS | |
| Dogan B., Nikbin K., Petrovski B., Dean D. |
| 5552 - A NONLOCAL INTEGRAL APPROACH TO ELASTIC-DAMAGE INTERFACE MODELLING | |
| Borino G., Failla B., Parrinello F. |
| 5572 - DETERMINATION OF THE INDENTATION RESISTANCE OF GRAVEL AS THE BASIS FOR SAFETY PROGNOSES OF GRAVEL-BURIED STEEL PIPELINES SUBJECTED TO ROCKFALL | |
| Mang H.A., Pichler B., Hellmich C. |
| 5627 - THERMAL LAP SHEAR TESTS ON MEMS INTERCONNECTED SOLDER | |
| Vogel J., Faust W., Dudek R., Michel B., Dost M. |
| 5630 - CYCLIC BEHAVIOR OF FRP-WRAPPED COLUMNS UNDER AXIAL AND FLEXURAL LOADINGS | |
| Ferracuti B., Savoia M. |
| 5631 - FRP – CONCRETE DELAMINATION RESULTS ADOPTING DIFFERENT EXPERIMENTAL PURE SHEAR SETUPS | |
| Mazzotti C., Savoia M., Ferracuti B. |
| 5638 - HYDROGEN EMBRITTLEMENT OF STAINLESS STEELS | |
| Robinson S.L., Moody N.R., Somerday B.P. |
| 5639 - PRACTICAL SOLUTION FOR AVOIDING FAILURE OF ABSORPTION TOWER AT A NITRIC ACID PLANT - REPLACING WELDING BY MECHANICAL JOINING - | |
| El-Batahgy A., Zaghloul B., Evgenia Kuleshova, Ya. Shtrombakh, O. Zabusov, Denis Zhurko |
| 5640 - FATIGUE OF OFF SHORE CONDENSATE RECYCLE LINE AT NATURAL GAS PRODUCTION FIELD | |
| El-Batahgy A., Zaghloul B., Tao Qian |
| 5647 - FRACTURING, ACOUSTIC EMISSION AND NUMERICAL SIMULATION OF GRANITE UNDER MODE II LOADING | |
| Stephansson O., Stanchits S., Backers T., Dresen G., Shen B. |
| 5652 - PHASE ANGLE IN INDENTATION-INDUCED DELAMINATION WITH BUCKLING AND ITS APPLICATION TO INDENTATION DELAMINATION IN ZnO FILM/SI SUBSTRATE SYSTEMS | |
| Zhang T.-Y., Zhao M.-H., Huang B., Zhang T.-Y. |
| 5654 - A NLFM METHOD FOR THE PREDICTION OF SLABS ON GRADE BEHAVIOUR | |
| Belletti B., Bernardi P., Meda A., Plizzari G. |
| 5663 - PROBABILISTIC APPROACHES FOR FRACTURE AND RELIABILITY ESTIMATIONS OF MICROSYSTEMS | |
| Winkler T., Michel B., Wunderle B. |
| 5682 - LOW CYCLE FATIGUE BEHAVIOUR OF RAILWAY WHEEL STEELS INCLUDING TEMPERATURE EFFECTS | |
| Ahlström J., Karlsson B., Mirsch M. |
| 5684 - MECHANISMS OF FATIGUE DAMAGE FORMATION AND EVOLUTION IN Zr-BASED BULK METALLIC GLASS | |
| Hess P.A., Menzel B., Dauskardt R.H. |
| 5689 - DYNAMIC STRAIN AGEING EFFECTS IN AN EXTRUDED AA 7030 ALLOY SUBJECTED TO TENSILE DEFORMATION | |
| Karlsson B., Hörnqvist M. |
| 5696 - EFFECT OF HYPERELASTICITY ON DYNAMICAL CRACK TIP INSTABILITIES | |
| Buehler M.J. ; Gao H., Stefano Beretta, Michele Carboni |
| 5720 - VIRTUAL TESTING FOR ESTIMATING MATERIAL FRACTURE PROPERTIES | |
| Farahmand B., Vladimir Filin |
| 5722 - CRACK LENGTH DETERMINATION DIFFICULTIES IN COMPOSITES- THEIR EFFECT ON TOUGHNESS EVALUATION | |
| Blackman B.R.K., Williams J.G., M. Benguediab |
| 5727 - CRACK PROPAGATION IN POROELASTIC FLUID-SATURATED SOLIDS AT INTERSONIC VELOCITIES | |
| Loret B., Radi E., Gianni Niccolini, Alberto Carpinteri |
| 5734 - DYNAMIC EFFECTS IN CRACK BRIDGING | |
| Cox B.N., Rosakis A., Sridhar N., Yang Q.D. |
| 5743 - RESIDUAL STRENGTH ANALYSIS USING CTOA CRITERIA FOR FUSELAGE STRUCTURES CONTAINING MULTIPLE SITE DAMAGE | |
| Hsu C.-L., Tom J.J., Anderson B.L. |
| 5757 - MODELING RUNNING FRACTURE IN PIPELINES – PAST, PRESENT, AND PLAUSIBLE FUTURE DIRECTIONS | |
| Leis B.N., Zhu X-K., Forte T.P., Clark E.B. |
| 5761 - FATIGUE LIFE EVALUATION OF WELDED JOINTS BASED ON NOMINAL STRESS AND FINITE ELEMENT ANALYSIS | |
| Goo B.C., Yang S.Y., Seo J.W. |
| 5770 - CRACK INITIATION AND DEFECT ASSESSMENT AT HIGH TEMPERATURES | |
| Dogan B., Petrovski B., Ceyhan U. |